Is the Samsung Galaxy S20 FE 5G rootable?
yes it is, there are 2 or 3 threads where people go over the methods they followed
Just don't update it past rev 1 or 2. 1 to be safe.
How To Root Samsung Galaxy S20 FE (SM-G780F) & Install Magisk - NaldoTech
Follow the guide below to root your Samsung Galaxy S20 FE (Fan Edition) and install Magisk Manager. The developer behind Magisk, topjohnwu, released a Magisk
www.naldotech.com
bininga59 said:
How To Root Samsung Galaxy S20 FE (SM-G780F) & Install Magisk - NaldoTech
Follow the guide below to root your Samsung Galaxy S20 FE (Fan Edition) and install Magisk Manager. The developer behind Magisk, topjohnwu, released a Magisk
www.naldotech.com
Click to expand...
Click to collapse
Unfortunately that is for exynos. Not sure how many people need to know how to systemlessly root an exynos. Full root might be more useful for exynos users but good ol' snapdragon has everyone in a pickle (most everyone.)
Flucker08 said:
Unfortunately that is for exynos. Not sure how many people need to know how to systemlessly root an exynos. Full root might be more useful for exynos users but good ol' snapdragon has everyone in a pickle (most everyone.)
Click to expand...
Click to collapse
there's zero difference in how both models are rooted. systemless root has been the standard method for all androids for a long time now.
pinguluk said:
Is the Samsung Galaxy S20 FE 5G rootable?
Click to expand...
Click to collapse
Yeah almost every phone is rootable but it will either cost money or if you've updated your firmware then you'll have to wait until they figure out how to get past it, assuming they do, they always have just takes time. If you have updated your firmware you can look in to selling your device and buying one that hasn't been updated. I can give you more pointers on how to find phones that haven't been updated for cheap but that's only if your interested and no I'm not selling anything.
pinguluk said:
Is the Samsung Galaxy S20 FE 5G rootable?
Click to expand...
Click to collapse
Yeah almost every phone is rootable but it will either cost money or if you've updated your firmware then you'll have to wait until they figure out how to get past it, assuming they do, they always have just takes time. If you have updated your firmware you can look in to selling your device and buying one that hasn't been updated. I can give you more pointers on how to find phones that haven't been updated for cheap but that's only if your interested and no I'm not selling anything.
3mel said:
there's zero difference in how both models are rooted.
Click to expand...
Click to collapse
Oh really. So then why does snapdragon lock the bootloader while exynos doesn't? Not to mention a root that works on exynos won't necessarily work on snapdragon. I thought this was fairly well known.
What exactly are you referring to by model?
Flucker08 said:
Yeah almost every phone is rootable but it will either cost money or if you've updated your firmware then you'll have to wait until they figure out how to get past it, assuming they do, they always have just takes time. If you have updated your firmware you can look in to selling your device and buying one that hasn't been updated. I can give you more pointers on how to find phones that haven't been updated for cheap but that's only if your interested and no I'm not selling anything.
Oh really. So then why does snapdragon lock the bootloader while exynos doesn't? Not to mention a root that works on exynos won't necessarily work on snapdragon. I thought this was fairly well known.
What exactly are you referring to by model?
Click to expand...
Click to collapse
magisk doesn't have different versions for different devices and it's been the standard root method for a few years now. since version 22 how it works has changed for all new phones.
I'm on a snapdragon that didn't have a locked bootloader because that's only done in the US market (at the request of or to please US carriers I'm guessing). SM-G780 is a model number of the Exynos S20FE... SM-G781 is the Qualcomm, they both use the exact same method to obtain root.
3mel said:
there's zero difference in how both models are rooted. systemless root has been the standard method for all androids for a long time now.
Click to expand...
Click to collapse
I didn't see your other post. I'm not really in to getting in to these debates online not really my thing but I still use full root myself and systemless as well. They both have their pros and cons. I suppose I prefer to edit system files myself to overclock the device instead of depending on an app to do it for me.
There are lots of people still using full root. I think a long time in terms of electronics can be hard to pinpoint. I've used full root way more times than I've used systemless but I guess that's just because I've been doing it for a long time. I know some linux phones you can buy don't come with systemless root but only come with full root and they don't make systemless root phones off the shelf like they do full root for a reason. To each their own.
google and OEMs have made messing around with the system partition harder, it's read only now and overlays are how edits are mostly done. plus there are more apps that won't run if root is detected, systemless gives you the chance to evade that detection if you want it.
CF-autoroot is pretty much dead, the superSU app is owned by a private company and Chainfire had moved on.
have a read of this
Installation
The Magic Mask for Android
topjohnwu.github.io
this is rooting today, it's very different
3mel said:
google and OEMs have made messing around with the system partition harder, it's read only now and overlays are how edits are mostly done. plus there are more apps that won't run if root is detected, systemless gives you the chance to evade that detection if you want it.
CF-autoroot is pretty much dead, the superSU app is owned by a private company and Chainfire had moved on.
have a read of this
Installation
The Magic Mask for Android
topjohnwu.github.io
this is rooting today, it's very different
Click to expand...
Click to collapse
Oh thanks for the info. Yeah I've definitely used systemless. I did like it but of course there's nothing like doing it yourself. Although I rooted phones back in the day I've also used Magisk though I could've swore I was able to use vi and edit system files that would've been unreadable and definitely unwritable but I'm pretty sure I just changed the mount of whatever it was I was working on from ro to rw with 'mount -o remount,rw /' I'm to lazy to pull up Magisk I think I have it on a tablet somewhere. I probably also changed the file permissions with chmod or chown then chmod but I think there are some files you can't change using systemless now that I think about it hence the name systemless I dunno it's been awhile since I messed around with rooted phones.
After awhile you realize how vulnerable the device is after root and then when you think you can trust these apps that have root access then someone announces they found "_______" app pulling user information... I'm definitely not referring to any apps used anymore but it was the app people used before they used Magisk and it pretty much did the same thing but I wouldn't be surprised if newer root apps did the same.
Wait you said since SDK 22? Was systemless even around then? I don't think it was. I know it's been around for awhile but not that long.
I did find out something pretty funny when this guy was rooting people's phones and he had a contact in China... I was determined to find out who this Chinaman was. Well I don't think I should really say out of respect because he clearly didn't want people to know where he was from but yeah I guess I'll have to keep that to myself but it was pretty funny to say the least.
Also this was before rona so him being from wherever was irrelevant I just wanted to get it cheaper than what everyone else was paying. Turned out to be some old guy and unsurprisingly as you've assumed, not from China, or was he? He actually just unlocks phones and didn't acknowledge I even used the word root, he was thinking "oh no, they've found me."
@Flucker08 I meant since version22 of magisk not SDK22.
rooting with magisk used to be something you could do all from a custom recovery. now you have to download your firmware and patch it with magisk on your phone and then flash the patched image from PC
Hello
Please tell me, if i rooted Samsung s20 FE 5G ( Snapdragon ) can update new Firmware its Odin ? and not lost my all user data ? ( i hope to not must clear ) and rooted again ?
Please write, how to do it ?
after the first time rooting and unlocking the bootloader (so you could root) you wouldn't have to wipe again.
you would download the updated firmware, patch the AP file from your phone same as before and flash the downloaded firmware and patched AP all together in Odin @onken
if you select CSC_home for the CSC partition your user data will not be wiped !!
Hi
Ok, thanks for info @3mel
Please tell me yet, patch the AP i must prepare before flash new update firmware ?
onken said:
Hi
Ok, thanks for info @3mel
Please tell me yet, patch the AP i must prepare before flash new update firmware ?
Click to expand...
Click to collapse
yes, you download the update from somewhere. extract the AP file from the archive and copy to the phone. run magisk from the phone and wait till it's finished. copy the patched file back to your computer and use it along with the rest of the firmware files. again for CSC you MUST use the HOME_CSC file and not the regular CSC if you don't want the phone wiped.
that last part only applies when updating the phone, the first time you root you will have to wipe.
onken said:
Hi
Ok, thanks for info @3mel
Please tell me yet, patch the AP i must prepare before flash new update firmware ?
Click to expand...
Click to collapse
It is advised against updating after root. If you're on exynos I don't know but snapdragon it will make you lose root and no getting it back. It's said you can do it by removing the boot files from the firmware before flashing but I haven't tried just heard about it. Honestly you should just leave it. You aren't missing out on any amazing features. Most updates are security and if you're root you don't have much anyways.
All ok thanks for advice
3mel said:
yes, you download the update from somewhere. extract the AP file from the archive and copy to the phone. run magisk from the phone and wait till it's finished. copy the patched file back to your computer and use it along with the rest of the firmware files. again for CSC you MUST use the HOME_CSC file and not the regular CSC if you don't want the phone wiped.
that last part only applies when updating the phone, the first time you root you will have to wipe.
Click to expand...
Click to collapse
Hi @3mel
If I unlock, install twrp and root with magisk as per afaneh92's method, since I have twrp now, how much will the update method differ from what you mentioned here, if i don't want a wipe. If possible, can you please tell the steps in brief or provide a source? Sorry if this is not the right place for asking this.
I'm on SM-G781B/DS with OneUI 4.1(Android12).
Related
Hoping this is an easy question for someone to answer - I'll do my own research this weekend when I have time and delete the question then if no one has replied. Thanks...
Probably not. The reason I bought the international version was because the snapdragon US variants have locked bootloader's..
That's why you can't flash TWRP and such.
=·\
I got really sick, really fast, of rooting my T-Mobile S7. The only way to do it was with the special unlocked kernel, and SuperSU.
And let's be honest, SuperSU is nowhere near as useful as Magisk. At least if you're like me, and you prefer your phone to be capable of the features that root, and other various mods, available.
The US devices are cursed with the slow, and limited possibilities, that their hardware manufacturer's allow.
=·[
I tried forever to switch my S7 over to Magisk.
Even tried things like recompiling the the special "development kernel", as I think it's called, into an Odin file, by Magisk manager.
And all my attempts always either resulted in the device refusing to even start the boot process, or Odin refusing to allow me to flash the Magisk compiled version of the kernel.. [I was using the special Odin to flash the files, too.]
=·[
Not to say it cannot be done, but I have a feeling it's highly unlikely, unfortunately.
But if you do find a way to make it work on your Note 8, I would love to hear the process, so maybe I could revive my S7 from the sad, slow, state it's in, now.
=·]
Ok... So where to begin...
I've searched the threads for a few days now and tried several flashing methods and tools, but I'm having no luck. So please bare with me, and I will get into it...
I recently purchased a new Note 9 international unlocked model. I was super excited and ready to get it running. Except, I started it up and then no Bixby Voice. Unlike most, I prefer to use it and find it helpful to me regularly, so I'd like to keep it. Anyway, when pressing the button I received the much noted "Bixby Voice is not available in your country" message. Well, I found from Samsung support live chat, that this is because of two reasons. One, I currently live in Japan. Two, the phone is a Singapore model phone. My immediate thought was "Oh, ok well, I'll just flash it with another country's firmware then". Seemed easy enough. I flashed it with firmware baring an OXM csc, and after booting up I noticed the the VoLTE feature that was not select-able before was now able to turned on. "Ooow, extra win!" I thought, but of course same issue with bixby. So I searched and found a csc for a location that has bixby is available and is also a carrier unlocked Exynos chipset firmware (XEU). I flashed this, but guess what... still no Bixby Voice. Frustrated, I began looking into changing the Sales code. Using the *#272*IMEI# code and found that MM1 was the sales code for some reason. I changed this to XEU and the phone rebooted. I restored and then tried Bixby Voice again... same. Except, I noticed I also lost the VoLTE option completely. It doesn't even show in the menu bar anymore. I tried the code again to change the sales code back, but now I get error "Connection problem or invalid MMI code." So now, I lost that too. "To hell with it", I thought. I'll flash it back to the old firmware... nope. Now I get:
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
This will sometimes change slightly if I try to flash a single part of the new firmware, BL, AP, CSC, etc...
I have done some research and found via the serial number that the firmware I should have installed is: N960FXXU1ARH5_N960FOXM1ARGD_N960FXXU1ARGC_N960FXXU 1ARH5_XSP (according to the Chimera Mobile tool)
I've obtained this, but I still get the same Revision error. I found that the one last one I successfully flashed is a newer version than the others. So now what can I do? Is it possible I can just manually manipulate the CSC details? I rooted the phone and got ES Explorer going, set all the access rights to R/W but I cant find the /System/CSC folder that people keep going on about. Did they do away with that on the Note 9?
It looks like I also have some regional troubles with the Play store too.
WTH... I'm really not sure what to do here. Can anyone please help? I'll be satisfied if I can just get it back to the stock firmware...
Decoding SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 come out to: Software Revision check fail, you have 2 and it's expecting 1.
That does indeed sound like you've installed a newer version and it's not letting you roll back the device. You may now need to wait for Singapore's stock firmware to be updated to the same or newer and get a copy of that.
who uses bixby use google assistant for peats sake!!!"!!!!
willhemmens said:
Decoding SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 come out to: Software Revision check fail, you have 2 and it's expecting 1.
That does indeed sound like you've installed a newer version and it's not letting you roll back the device. You may now need to wait for Singapore's stock firmware to be updated to the same or newer and get a copy of that.
Click to expand...
Click to collapse
Hi willhemmens! Thanks for replying back.
I was also speculating the same thing about having to wait for the revision, but I know the people here are significantly more knowledgeable, so I thought I'd try to pick some brains. My first though was that there must be something in one of the package files that identify to the phone what "version" it is, and then perhaps that can be modified and then re-packaged. But if that were the case, this would be the best place on the planet to verify that. I have tools to un-package and repackage, maybe I'll make a duplicate copy and tinker around in it.
It looks like everyone is complaining about it. It's been a while since I rooted a device (7 years maybe?), so I hadn't realized Samsung took a dump in the downgrade pool. I also found some other new 'glorious' features they've graced us with-after the fact of course. Now, when I un-root... it's still flagged as modified! Woohoo. ....Fricken' KNOX. Now all of the nifty Samsung apps are blocked. Is it just me, or has Samsung turned a little extra Ass-hat recently?
Anyway, I guess I'll have to deal with this lame iOS quality version of Oreo until then... By the way, off the top of your head do you know where I can go to keep an eye out for that update to happen? All I know is SamMobile.com
Thanks again.
mikey_sk said:
who uses bixby use google assistant for peats sake!!!"!!!!
Click to expand...
Click to collapse
Hi Mikey! Yeah, I suppose your right. I've just been using it a lot and have gotten accustomed to it. Plus I enjoy creating my own custom Bixby voices, attitudes, and responses. Bixby on my Note 8 has split personality.
Luckily she doesn't randomly laugh in the dark like Alexa. If she did she'd fly out the window like a Note 7.
csc was omc and now odm.
bober10113 said:
csc was omc and now odm.
Click to expand...
Click to collapse
HI Bober10113! Thanks for your reply. I was able to find my way there, but It seems the csc feature files are encrypted now. I'm still looking through the threads for something about how to decrypt/encrypt them, but I haven't found anything yet.
VetteMike69 said:
HI Bober10113! Thanks for your reply. I was able to find my way there, but It seems the csc feature files are encrypted now. I'm still looking through the threads for something about how to decrypt/encrypt them, but I haven't found anything yet.
Click to expand...
Click to collapse
Actually, I just found a video on YouTube where Yakapa40 is able to unpack the xml files using some "cscfeature" executable.
@yakapa40
Is there any chance you might be willing to share your "cscfeature.exe" file for unpacking the feature XML files in the CSC?
VetteMike69 said:
Actually, I just found a video on YouTube where Yakapa40 is able to unpack the xml files using some "cscfeature" executable.
@yakapa40
Is there any chance you might be willing to share your "cscfeature.exe" file for unpacking the feature XML files in the CSC?
Click to expand...
Click to collapse
Ah sorry, nevermind... I was able to make a ps1 for it instead. I'm good one decoding and encoding the XMLs now.
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
edit : sorry no licence , but you can make your own patch file
yakapa40 said:
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
Click to expand...
Click to collapse
you made the exe with freeware(advance bat to exe converter)that only works on your PC. read the software policy.. its clearly written that what you compile only works on 1 computer.
anyways for everyone else, here is a proper tool:
https://1drv.ms/f/s!AhXVLDDj8g3Agdl8B0jk3H1dqccrXw
bober10113 said:
you made the exe with freeware(advance bat to exe converter)that only works on your PC. read the software policy.. its clearly written that what you compile only works on 1 computer.
anyways for everyone else, here is a proper tool:
https://1drv.ms/f/s!AhXVLDDj8g3Agdl8B0jk3H1dqccrXw
Click to expand...
Click to collapse
Hi bober, don't know where else to post this, so posting it here...I have seen a bunch of your posts and it seems you've figured out a way to use Canadian CSC on the 960 F/DS...i have a few questions:
1- First step is install TWRP?
2- then root?
3- do I have to change the actual firmware of the device? Mine is a singapore unit
4- Once I change CSC, how are updates handled after that if I want to keep using stock firmware?
5- If I can't do OTA, then how will I update to the latest version and security patches? Do I download these for the Canada version? or the Singapore version?
Any help would be highly appreciated!!
hkalltheway said:
Hi bober, don't know where else to post this, so posting it here...I have seen a bunch of your posts and it seems you've figured out a way to use Canadian CSC on the 960 F/DS...i have a few questions:
1- First step is install TWRP?
2- then root?
3- do I have to change the actual firmware of the device? Mine is a singapore unit
4- Once I change CSC, how are updates handled after that if I want to keep using stock firmware?
5- If I can't do OTA, then how will I update to the latest version and security patches? Do I download these for the Canada version? or the Singapore version?
Any help would be highly appreciated!!
Click to expand...
Click to collapse
i think you should weigh in what you want to achieve by changing csc and if it really is worth rooting for.
i rooted for custom roms, sound mods and just sheer control over my device.
but this comes with a price:
no samsung pay ( yet)( can always unroot)
tripped knox fuse, so probably no warranty. depends.(once tripped, this cannot be reverted)
misc apps detect root and might no longer root.(can always unroot)
so you should read up and get informed on what you need and if you need root/twrp.
concerning updates once rooted:
either use custom roms. BL and CP can be manually updated via stock firmware while custom rom keeps the system up to date.
or flash full stock firmware each time then re-root.
in both cases above, firmware files to be used are for exynos F devices. forget the canadian firmware, you cant flash that since it's for snapdragon devices.
yakapa40 said:
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
edit : sorry no licence , but you can make your own patch file
Click to expand...
Click to collapse
Hi @yakapa40!
Thank you, this looks like it'll be a bit more convenient than the one I made previously. I'll put it on record for next time. Luckily I was able to find what prevented me from flashing the older revision CSC and modify that. So now I was able to use Odin to drop down my PDA and CSC while keeping the newer Bootloader and Baseband. I guess it's a bit of a Frankin'-Firm now. Whats weird though, is that now my knox sometimes shows tripped and sometimes doesn't; sometimes root checker fails and sometimes it passes.
I wonder if I grazed on something that's related to the knox handler... Nagh... probably just wishful thinking. Still weird though.
bober10113 said:
i think you should weigh in what you want to achieve by changing csc and if it really is worth rooting for.
i rooted for custom roms, sound mods and just sheer control over my device.
but this comes with a price:
no samsung pay ( yet)( can always unroot)
tripped knox fuse, so probably no warranty. depends.(once tripped, this cannot be reverted)
misc apps detect root and might no longer root.(can always unroot)
so you should read up and get informed on what you need and if you need root/twrp.
concerning updates once rooted:
either use custom roms. BL and CP can be manually updated via stock firmware while custom rom keeps the system up to date.
or flash full stock firmware each time then re-root.
in both cases above, firmware files to be used are for exynos F devices. forget the canadian firmware, you cant flash that since it's for snapdragon devices.
Click to expand...
Click to collapse
Hi @hkalltheway!
Bober10113 is absolutely right on this. Really, you need to know what exactly you are rooting the device for. If you don't have a set reason, it may be better not to root it. You can flash stock firmware and CSC all day long without needing a root. But if you want to customize the features (there's not really a lot right now by the way) and setup custom menus, layouts, or run CFW... Then you'll have to go the way of rooting. But again, there is currently no definitive way to "untrip" your knox. As he said, you can "unroot" but you cannot "technically" regain your unmodified status; even though you can revert back to a stock rom. By loosing this status you loose access to Pay, Secure Folder, and a few other things. I think there is a mod out there to get Samsung Health working again, but as far as I'm currently aware, that's the only one you can re-gain. Most of them validate against your knox value.
Regarding your questions.
YES! You should always install TWRP first before doing any 'messin'. This is your ultimate line of recovery and the best mulligan your gonna get from your device. Always follow the two step wonder on this:
1. Install TWRP
2. Boot into TWRP and create a full backup of your partitions (Before anything else). I do this to the SD card in the tray. That way it's always handy.
After this, feel free to play around, but keep in mind what versions/revisions your flashing. If you jump to a new one, it's not easy to downgrade -it'll take hours to download and rewrite the firmware you need and trick the phone into thinking it's flashing the latest update.
Regarding a changed CSC and the updates... You should have no problem getting updates. But Samsung sends out updates to devices based on the CSC. So, if you flash the CSC, the updates you get will come at the same time interval of the country and location of the CSC that you flashed. For example, you have a Sin model with Sin CSC just like me, but if you flash to a UK CSC, then you will get your updates at the same time that the UK get their updates. Etc, Etc...
For the OTA Updates, if your on a stock firmware you should get these fine. If they do not automatically update you can just tap the update button manually in settings to check for new updates and then download them. Some have said you need to turn off automatic updates, and some say you do not. This, I'm not 100% sure on this one. Also, you can manually update by flashing the newest version through Odin as the come in. Usually SamMobile.com is good about keeping up to date firmware that you can download with all 4 packs, nicely labeled for you.
Hopefully that helps you out a bit.
VetteMike69 said:
Hi @hkalltheway!
Bober10113 is absolutely right on this. Really, you need to know what exactly you are rooting the device for. If you don't have a set reason, it may be better not to root it. You can flash stock firmware and CSC all day long without needing a root. But if you want to customize the features (there's not really a lot right now by the way) and setup custom menus, layouts, or run CFW... Then you'll have to go the way of rooting. But again, there is currently no definitive way to "untrip" your knox. As he said, you can "unroot" but you cannot "technically" regain your unmodified status; even though you can revert back to a stock rom. By loosing this status you loose access to Pay, Secure Folder, and a few other things. I think there is a mod out there to get Samsung Health working again, but as far as I'm currently aware, that's the only one you can re-gain. Most of them validate against your knox value.
Regarding your questions.
YES! You should always install TWRP first before doing any 'messin'. This is your ultimate line of recovery and the best mulligan your gonna get from your device. Always follow the two step wonder on this:
1. Install TWRP
2. Boot into TWRP and create a full backup of your partitions (Before anything else). I do this to the SD card in the tray. That way it's always handy.
After this, feel free to play around, but keep in mind what versions/revisions your flashing. If you jump to a new one, it's not easy to downgrade -it'll take hours to download and rewrite the firmware you need and trick the phone into thinking it's flashing the latest update.
Regarding a changed CSC and the updates... You should have no problem getting updates. But Samsung sends out updates to devices based on the CSC. So, if you flash the CSC, the updates you get will come at the same time interval of the country and location of the CSC that you flashed. For example, you have a Sin model with Sin CSC just like me, but if you flash to a UK CSC, then you will get your updates at the same time that the UK get their updates. Etc, Etc...
For the OTA Updates, if your on a stock firmware you should get these fine. If they do not automatically update you can just tap the update button manually in settings to check for new updates and then download them. Some have said you need to turn off automatic updates, and some say you do not. This, I'm not 100% sure on this one. Also, you can manually update by flashing the newest version through Odin as the come in. Usually SamMobile.com is good about keeping up to date firmware that you can download with all 4 packs, nicely labeled for you.
Hopefully that helps you out a bit.
Click to expand...
Click to collapse
phone info tool and other root detect apps are notorious for reporting wrong Knox status.....
he wants a csc from a snapdragon to a exynos. so flashing csc from SD in odin is ill advised. so it will require root and files be either manualy modded or i have updated tkkg1994 csc pack to work on note 9. ive only added canadian region.
https://1drv.ms/u/s!AhXVLDDj8g3AgdkwkPIxwDu5ZFASuQ
in twrp backup:
EFS
carrier files
then flash zip.
i wont be held responsible for anything. Ive tested on my N960N.
should work on any F or FD/DS too.
all credits to tkkg1994.
bober10113 said:
phone info tool and other root detect apps are notorious for reporting wrong Knox status.....
he wants a csc from a snapdragon to a exynos. so flashing csc from SD in odin is ill advised. so it will require root and files be either manualy modded or i have updated tkkg1994 csc pack to work on note 9. ive only added canadian region.
https://1drv.ms/u/s!AhXVLDDj8g3AgdkwkPIxwDu5ZFASuQ
in twrp backup:
EFS
carrier files
then flash zip.
i wont be held responsible for anything. Ive tested on my N960N.
should work on any F or FD/DS too.
all credits to tkkg1994.
Click to expand...
Click to collapse
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
hkalltheway said:
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
Click to expand...
Click to collapse
well then root might be food for you.
have a read at Dr Ketan roms thread for the root procedure and details of what it involves.
hkalltheway said:
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
Click to expand...
Click to collapse
what is your carrier?
because Rogers blacklists non carrier phones. i believe bell might also do that too. So even if all is there and options appear, your phones imei code will be blocked from enrolling for wifi calling.
bober10113 said:
what is your carrier?
because Rogers blacklists non carrier phones. i believe bell might also do that too. So even if all is there and options appear, your phones imei code will be blocked from enrolling for wifi calling.
Click to expand...
Click to collapse
I'm currently with fido but thinking of switching to freedom mobile. Still too worried about all this rooting stuff that it seems the best thing to do is stay away from now and choose from one of the 2:
1- use wifi calling / VoLTE by getting the rogers/fido phone directly; that phone will not have dual sim capability
2- forget wifi calling / VoLTE and use this dual sim version, which has a lot of advantages while traveling
Seems like I'll stick to the 2nd option for now. Thanks for the help!
Hey im new to Samsung phones and got an S10+ preordered. Will I be able to flash TWRP and Magisk the day I get it or will it take some time? Also is there anything special about rooting Samsung phones?
Thank you for your answers!
I would not expect for immediately. Devs need to reverse engineer/hack their way around the firmware locks to attain root and keep the device bootable. Once they do that, the devices are ours. though I cannot imagine it would be too different from the 9 series with flash counters and such not.
Edit: Typos.
F0rbidN said:
Hey im new to Samsung phones and got an S10+ preordered. Will I be able to flash TWRP and Magisk the day I get it or will it take some time? Also is there anything special about rooting Samsung phones?
Thank you for your answers!
Click to expand...
Click to collapse
If it's the US snapdragon I highly doubt it but with exynos most likely and it will trip knox just like the Note 9.
Misterxtc said:
If it's the US snapdragon I highly doubt it but with exynos most likely and it will trip knox just like the Note 9.
Click to expand...
Click to collapse
I will get the exynos version. What are the disadvantages of triggering knox? Thank you for letting me know.
zerolock said:
I would not expect for immediately. Devs need to reverse engineer/hack their way around the firmware locks to attain root and keep the device bootable. Once they do that, the devices are ours. though I cannot imagine it would be too different from the 9 series with flash counters and such not.
Edit: Typos.
Click to expand...
Click to collapse
Will I have to do a factory reset in order to root my device?
F0rbidN said:
I will get the exynos version. What are the disadvantages of triggering knox? Thank you for letting me know.
Click to expand...
Click to collapse
You will loose Samsung Pay, secure folders and banking apps probably won't work. There is more but that's all that comes to mind right now. Uninstalling root and flashing everything to stock won't fix the lost apps either, it's permanent. I think it will reset your phone too.
Root
Banking apps will work once able to flash Magisk, simply using a system-less root method will allow for work arounds such as Magisk hide etc. which will definitely allow for such apps to work. Exactly as has been seen for the past few generations of devices using Magisk! Anyway... on another note, yes bootloader will very likely be unlockable on Exynos variants allowing for TWRP and custom rom installation but highly unlikely on Snapdragon variants.
Misterxtc said:
You will loose Samsung Pay, secure folders and banking apps probably won't work. There is more but that's all that comes to mind right now. Uninstalling root and flashing everything to stock won't fix the lost apps either, it's permanent. I think it will reset your phone too.
Click to expand...
Click to collapse
Are you sure about permanent block ?!
A0_o said:
Are you sure about permanent block ?!
Click to expand...
Click to collapse
Yes because the past root methods trip knox and blow a efuse witch is not reversible. Unless a different root method is discovered this phone will be no different. As the post says above there are some workarounds but that is not a guarantee. Some apps can not be fooled.
Misterxtc said:
Yes because the past root methods trip knox and blow a efuse witch is not reversible. Unless a different root method is discovered this phone will be no different. As the post says above there are some workarounds but that is not a guarantee. Some apps can not be fooled.
Click to expand...
Click to collapse
i have read about some way to root without trip kNox but you have to dont use magisk or xposed just you got an access to system files.
Wish SuperUser root XDA god 'Chainfire' hadn't retired!
A0_o said:
i have read about some way to root without trip kNox but you have to dont use magisk or xposed just you got an access to system files.
Click to expand...
Click to collapse
Are you talking about sig. spoofing like Firegapps and stuff?
I'm waiting for anyone who has enough guts to try, all I really want is v4a.
This is the last galaxy I buy I think, prolly go one plus next time. But yea this is a waiting game. I'm waiting for someone to bribe the dev's to prenstall v4a for us in an ota update. Hey be a great April fools joke ....heh
Hey yall,
So I have a Galaxy Note 8 and of course it is SM-N950U VZW running Android Pie, and BL is N950USQS8DTJ1. Now all the crap I've dug through to research the process to root it I haven't found any way to do so. Now I'm curious as to wether it can be done considering Snapdragon wont allow the bootloader to be unlocked? Now I have read one forum that claims that we can now unlock the bootloader on Snapdragon but all i could seem to find was a bunch of bickering back and forth. Is it possible to do so now or is it just a fancy ruse? If someone can point me to the right path i would appreciate it. Please keep in mind that i am somewhat familiar with the process of rooting but I'm a better tech than I am on the software side so please be specific about your answer and forgive me for my lack of knowledge. I'm self taught over a couple years now so it's been a try and learn process. I'm also curious as to if cwm or twrp can be installed and used on it as well.
wacknhack said:
Hey yall,
So I have a Galaxy Note 8 and of course it is SM-N950U VZW running Android Pie, and BL is N950USQS8DTJ1. Now all the crap I've dug through to research the process to root it I haven't found any way to do so. Now I'm curious as to wether it can be done considering Snapdragon wont allow the bootloader to be unlocked? Now I have read one forum that claims that we can now unlock the bootloader on Snapdragon but all i could seem to find was a bunch of bickering back and forth. Is it possible to do so now or is it just a fancy ruse? If someone can point me to the right path i would appreciate it. Please keep in mind that i am somewhat familiar with the process of rooting but I'm a better tech than I am on the software side so please be specific about your answer and forgive me for my lack of knowledge. I'm self taught over a couple years now so it's been a try and learn process. I'm also curious as to if cwm or twrp can be installed and used on it as well.
Click to expand...
Click to collapse
Exact same scenario... I see some ROOT possibilities with S7 bootloader, but appears ours is S8, so is ROOT possible with this BL version?
klt316 said:
Exact same scenario... I see some ROOT possibilities with S7 bootloader, but appears ours is S8, so is ROOT possible with this BL version?
Click to expand...
Click to collapse
Root Galaxy Note 8 Snapdragon using Extreme Syndicate Method (SM-N950U/U1)
A step-by-step guide on how to root Snapdragon Galaxy Note 8 (SM-N950U/U1) running V8 bootloader using the Extreme Syndicate root method.
www.thecustomdroid.com
Trying to use root method from Extreme Syndicate, in particular, XDA RD elliwigy, even though it says for BL S7 and I have S8. Not getting far... ODIN3 tool hangs in flash process... not sure this will work, but continuing to hack at it...
klt316 said:
Root Galaxy Note 8 Snapdragon using Extreme Syndicate Method (SM-N950U/U1)
A step-by-step guide on how to root Snapdragon Galaxy Note 8 (SM-N950U/U1) running V8 bootloader using the Extreme Syndicate root method.
www.thecustomdroid.com
Trying to use root method from Extreme Syndicate, in particular, XDA RD elliwigy, even though it says for BL S7 and I have S8. Not getting far... ODIN3 tool hangs in flash process... not sure this will work, but continuing to hack at it...
Click to expand...
Click to collapse
Did successfully root Note 8 with S8 and loaded Nougat. ODIN3 wasn't working, but after reading thru the thread, I used a different cable, directly into a USB port on the PC (was on a hub), then ODIN3 worked fine. Will live with the 80% battery issue for now. May buy a OnePlus 7T evidently best (easiest?) phone to root? The Note 8 is not my primary phone and was a phone I had laying around so it'll do for now. Thanks to this forum for providing a solution albeit not ideal. Like these small victories.
Does this work for N950USQS8DTJ1?
dpwm said:
Does this work for N950USQS8DTJ1?
Click to expand...
Click to collapse
Yes, that is the same version of mine... works but with caveats... for one, I couldn't get Life360 to work after rooting... Tried all versions, including old ones for Nougat, no worky. Some apps don't work, some are quirky, however, only affects few apps here and there. Overall, everything works just like on stock OS. And very thankful it is an available option for root. The biggest thing for me is the battery bug, max charge of 80% just doesn't cut it, doesn't last all day, so I'm forced to carry a portable charger, and it's only going to get worse over time. This alone is going to force me to get another phone, maybe a OnePlus 7T, I see those are supposedly easiest to root. But this root does work for yours (and my) version of Note 8!
Hey there,
So I need to know all the necessary steps to properly install Andronix and Termux (F-Droid) by unlocking the bootloader. Do you know where I can find all the information about that for Galaxy s10?
Depends on WHICH S10 you have. Snapdragon CPU versions cannot really be unlocked. Exynos can. This forum is full of threads on how to do the Exynos, of course... I have a Snapdragon so I haven't spent much time learning it...
Ok thanks I have a snapdragon also so I guess I will do something else
I hear you - I have Snapdragon too, so I gave up ROM and rooting on this phone. Honestly, I don't miss it. I used to ROM and root all my previous phones, but I don't see the need to do that anymore.
I want to ssh my network from my phone using a vpn to access my router so I can wake on lan my server
You should be able to do that without root from the phone - ssh doesn't require root to run, and it's just a secure terminal. You can get an app to do that (I see plenty on the play store). As for VPN, again, you don't need root on the phone to do that - I have used OVPN many times from my phone without issue (and without root).
schwinn8 said:
You should be able to do that without root from the phone - ssh doesn't require root to run, and it's just a secure terminal. You can get an app to do that (I see plenty on the play store). As for VPN, again, you don't need root on the phone to do that - I have used OVPN many times from my phone without issue (and without root).
Click to expand...
Click to collapse
Ok thanks
Why is everybody so convinced that rooting will only be possible with an unlocked bootloader? if there were to be a kernel exploit which would gain us access to the block devices i would say it's possible to downgrade the bootloader or anything which is accessible by block devices like the recovery partition. Am i missing something here?
DaanNL said:
Why is everybody so convinced that rooting will only be possible with an unlocked bootloader? if there were to be a kernel exploit which would gain us access to the block devices i would say it's possible to downgrade the bootloader or anything which is accessible by block devices like the recovery partition. Am i missing something here?
Click to expand...
Click to collapse
If you have a solution to root a galaxy s10 snapdragon cpu I will read your comments on it. But I think I believe that is because of the articles in the internet are only mentioning that I need to unlock the bootloader.
Indirectelex said:
If you have a solution to root a galaxy s10 snapdragon cpu I will read your comments on it. But I think I believe that is because of the articles in the internet are only mentioning that I need to unlock the bootloader.
Click to expand...
Click to collapse
Yes, everybody is so convinced that you need to unlock the bootloader and i wonder why.... we don't need odin to flash, afaik as we can find a kernel exploit which would gain us root access we could set properties to enable the oem unlock option.... making it available and usable could be a different case..... some requirements need to be met. If we could access block devices we should be able to install magisk and root the device.
Indirectelex said:
If you have a solution to root a galaxy s10 snapdragon cpu I will read your comments on it. But I think I believe that is because of the articles in the internet are only mentioning that I need to unlock the bootloader.
Click to expand...
Click to collapse
I think i'm getting somewhere, don't know for sure... at first i was only able to flash CSC and now i'm able to flash every slot.... do you have the same results in odin?
DaanNL said:
I think i'm getting somewhere, don't know for sure... at first i was only able to flash CSC and now i'm able to flash every slot.... do you have the same results in odin?
Click to expand...
Click to collapse
I cant do tests on my galaxy s10 but I will on a Moto z2
we are so ****ed with the cellphones
Yeah, I need one too! I got a Galaxy S10 Plus Snapdragon. It's it's been 2 years since I have it and I can't find nobody that can teach me how to root it!!!
Because it cannot be rooted. US carriers have made that happen, and the manufacturers have had to keep doing it.
Many have tried, and on older BLs it can be done, but once you update you are stuck on a newer BL and cannot downgrade. If you root with the older BL, you cannot upgrade the BL either, because that will relock it.
If someone comes up with a way to do it, I'm all ears, as are many others... but with higher level crypto being implemented for this protection (ie, you need to know the crypto key!), it likely won't happen.
I have an idea but i don't know if it's possible, i tried but it seems corepatch isn't working.
I see a lot of topics about what's needed to unlock the bootloader, but if i look in the source code what is required to unlock the bootloader there's a lot of ro. properties which we can't set because we are not root.
As LSPatch can now communicate with Shizuku and gain system level access we might be able to disable system app verification (platform certificate, by extending CorePatch or maybe someone can write a signature verification disabler for lsposed). Then create an app which doesn't check for all these properties and initiates an OEM unlock and install it as system user./