Database Develop

My phone got Bricked

I need help getting my phone unbricked, because its my only phone, it bricked and it boots into black screen and i can't boot into recovery mode and fast boot mode, is there anyone who can help me, it bricked when i flashed TWRP because my phone was updated into MIUI 12.5
Edited: it shows the logo and it turns on but it will back screen when it reaches the boot animation and does nothing.

I've searched my way into every pieces on the internet to find answers on my phone, and i got some information about how to restore redmi note 9 into stock, by using EDL mode in the phone, you can reset the phone into stock firmware, but the problem is i don't know anything about the redmi note 9 main board and i don't know which specific jumper i should touch, i might destroy the board if i shorted any jumpers, i hope get answers on what jumper i should touch to enter EDL mode in Redmi note 9

PM me... i'll guide u

If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Click to expand...
Click to collapse
Thank you so much for the help bro, i unbricked my device but i still need help about downgrading MIUI, you have any guide to that? from preloader to every img?

VD171 said:
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Click to expand...
Click to collapse
btw, i totaled my phone and it doesn't boot no more it just black screens and in computer, it shows mediatek comport, i installed the wrong vbmeta because i was planning to downgrade the phone, is there any fix on it?

briangwapo81 said:
Thank you so much for the help bro, i unbricked my device but i still need help about downgrading MIUI, you have any guide to that? from preloader to every img?
Click to expand...
Click to collapse
Choose your firmware and flash it as any other xiaomi. You can google about it.
briangwapo81 said:
btw, i totaled my phone and it doesn't boot no more it just black screens and in computer, it shows mediatek comport, i installed the wrong vbmeta because i was planning to downgrade the phone, is there any fix on it?
Click to expand...
Click to collapse
Read my post again: https://forum.xda-developers.com/t/my-phone-got-bricked.4224163/post-84373765
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
Choose your firmware and flash it as any other xiaomi. You can google about it.
Read my post again: https://forum.xda-developers.com/t/my-phone-got-bricked.4224163/post-84373765
Click to expand...
Click to collapse
no bro, i meant that the phone does not boot anymore and just shows this, your fix worked but, i really totaled my phone because it didn't flash, it errored

briangwapo81 said:
no bro, i meant that the phone does not boot anymore and just shows this, your fix worked but, i really totaled my phone because it didn't flash, it errored
Click to expand...
Click to collapse
What caused this ?
Did you try to flash the patched vbmeta or original stock vbmeta ?
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
What caused this ?
Did you try to flash the patched vbmeta or original stock vbmeta ?
Click to expand...
Click to collapse
i flashed the wrong VBmeta version and the wrong recovery version

briangwapo81 said:
i flashed the wrong VBmeta version and the wrong recovery version
Click to expand...
Click to collapse
Did you flash the patched vbmeta or original stock vbmeta ?
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
Did you flash the patched vbmeta or original stock vbmeta ?
Click to expand...
Click to collapse
the original one, but the thing is i installed the wrong version because my phone's miui is 12.5 but i installed vbmeta 11.5 original version

u want solution??

briangwapo81 said:
the original one, but the thing is i installed the wrong version because my phone's miui is 12.5 but i installed vbmeta 11.5 original version
Click to expand...
Click to collapse
Recovery partition is verified by vbmeta.
You need to disable verification in vbmeta.
Doesn't matter what version is, if vbmeta is disabled, it will not verify any partition.
If you flash any custom partition without disable verification on vbmeta (or change vbmeta version without disabled verification), it will keeps bricked until you flash original stock rom firmware.
If you are flashing anything, you are changing stock rom.
You can only change stock rom with unlocked bootloader.
If your bootloader is locked, it will keeps bricked until you flash stock rom and unlock bootloader.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Butterfly_Bites said:
u want solution??
Click to expand...
Click to collapse
Yes. Please, tell us your solution
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Butterfly_Bites said:
u want solution??
Click to expand...
Click to collapse
Will you please tell us?

briangwapo81 said:
Will you please tell us?
Click to expand...
Click to collapse
Obviously, he will try to sell you something.
Please, taken care.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
Recovery partition is verified by vbmeta.
You need to disable verification in vbmeta.
Doesn't matter what version is, if vbmeta is disabled, it will not verify any partition.
If you flash any custom partition without disable verification on vbmeta (or change vbmeta version without disabled verification), it will keeps bricked until you flash original stock rom firmware.
If you are flashing anything, you are changing stock rom.
You can only change stock rom with unlocked bootloader.
If your bootloader is locked, it will keeps bricked until you flash stock rom and unlock bootloader.
Click to expand...
Click to collapse
yeah, i used the disable verification command on vbmeta, the bootloader is unlocked, but the issue is that i installed the wrong version of the vbmeta, and other things are that my device won't sow in mi flash or SP flash tool, but it shows up in platform tools when the phone was in fastboot mode

VD171 said:
Obviously, he will try to sell you something.
Please, taken care.
Click to expand...
Click to collapse
that's what i doubt too.

briangwapo81 said:
yeah, i used the disable verification command on vbmeta, the bootloader is unlocked, but the issue is that i installed the wrong version of the vbmeta, and other things are that my device won't sow in mi flash or SP flash tool, but it shows up in platform tools when the phone was in fastboot mode
Click to expand...
Click to collapse
Can you record your bootloop?
Please, read careful this FAQ and reply with your bootloop record in this thread: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/

Ozip links for Realme 6 (RMX2001)

OZIP's FOR RMX2001​​«Android 10»​ㅤㅤ ㅤㅤㅤㅤ ㅤㅤㅤㅤㅤㅤㅤ Click Here
«Android 11»​*Team Drive Gone Will Find And Update
​Need Help?
Contact Me On Telegram
-GROUP LINK-

Awesome!! Can I dirty flash ui2?

Android 11 update (C12 Global) failed, why?

Not flashing ui 2

Ferbir88 said:
Android 11 update (C12 Global) failed, why?
Click to expand...
Click to collapse
it cant be flashed directly u should flash ozip using custom recovery but after flash , flash patched vbmeta too otherwise u got brick for more info ask in ofiicial realme 6 main telegram group

xdriv3r said:
Not flashing ui 2
Click to expand...
Click to collapse
u cant flash it by stock recovery read other comment reply

unique_sandesh said:
it cant be flashed directly u should flash ozip using custom recovery but after flash , flash patched vbmeta too otherwise u got brick for more info ask in ofiicial realme 6 main telegram group
Click to expand...
Click to collapse
I tried not working (bootloop). I lfashed patched vbmeta. I installed it with custom recovery

Ferbir88 said:
I tried not working (bootloop). I lfashed patched vbmeta. I installed it with custom recovery
Click to expand...
Click to collapse
tell meyour all process sir , and they also need format

unique_sandesh said:
unique_sandesh said:
tell meyour all process sir , and they also need format
First, I flashed stock b.53 firmware with SP flashtool and I update with stock recovery to b.65. For the second time I need root the firmware and patch vbmeta, because missing the custom recovery without this step.( orange fox recovery)For the third Time I flash the c.12 firmware with custom recovery, and reboot to bootloader from recovery than I patch c.12 vbmeta. For the last Time I reboot and the end result bootloop.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

unique_sandesh said:
tell meyour all process sir , and they also need format
Click to expand...
Click to collapse
First, I flashed stock b.53 firmware with SP flashtool and I update with stock recovery to b.65. For the second time I need root the firmware and patch vbmeta, because missing the custom recovery without this step.( orange fox recovery)For the third Time I flash the c.12 firmware with custom recovery, and reboot to bootloader from recovery than I patch c.12 vbmeta. For the last Time I reboot and the end result bootloop

ofc it will not boot untill u format data , u need to format data . give these cmd fastboot -w , fastboot erase userdata

unique_sandesh said:
ofc it will not boot untill u format data , u need to format data . give these cmd fastboot -w , fastboot erase userdata
Click to expand...
Click to collapse
Thank you very much now It works, but I want to ask you: Why can not i enter in recovery Mode? I tried the power on and volume down combination, but the phone enter only fastboot mode with "oplus verification failed" message. If I do a factory reset under the Android, the phone load the recovery, until resetting.

Ferbir88 said:
Thank you very much now It works, but I want to ask you: Why can not i enter in recovery Mode? I tried the power on and volume down combination, but the phone enter only fastboot mode with "oplus verification failed" message. If I do a factory reset under the Android, the phone load the recovery, until resetting.
Click to expand...
Click to collapse
from rmui 2.o we only get in fastboot mode. for recovery give this cmd fastboot reboot recovery, , and ignore that oppo verify failed msg

unique_sandesh said:
from rmui 2.o we only get in fastboot mode. for recovery give this cmd fastboot reboot recovery, , and ignore that oppo verify failed msg
Click to expand...
Click to collapse
Thank you very much!

Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply

Jegwaar said:
Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply
Click to expand...
Click to collapse
were the same situation and i dont know what to do. Please help us.

which is the process 4 install? im on rui 1.0

Kodize said:
which is the process 4 install? im on rui 1.0
Click to expand...
Click to collapse
using custom recovery
Rollback With Custom Recovery
This Method Only For Realme 6/6i(indian)/6s _____________________ RMUI2.0 TO RMUI 1.0____________________________________________ This Method For Downgrading From F2Fs Based Custom Roms ⓿ Flash Latest TWRP (Gofaraway One) ❶ Go to manage partitions And Select...
telegra.ph

Jegwaar said:
Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply
Click to expand...
Click to collapse
keep unlockd your bl and use spft for flashing rui 2 make sure you selected download only in spft while flashing here is the latest decrypted firmware link https://t.me/rmx2001_clouds/7

unique_sandesh said:
keep unlockd your bl and use spft for flashing rui 2 make sure you selected download only in spft while flashing here is the latest decrypted firmware link https://t.me/rmx2001_clouds/7
Click to expand...
Click to collapse
Hi guys, did someone do this ? i'm in the same situation after rolling back to B55 using stock recovery, now stuck on B65, no update coming.
Bootloader is unlocked, when i flash a C18 firmware with SPF phone bootloop in fastboot mode.
Only flashing a B65 firmware with SPF to get phone boot corretly.
I just need to known if this method is tested with the given C19 firmware ?
Many thx.

How To Guide GSI Install guide for Motorola G50 and 5G

A simple guide to installing custom GSI's on Motorola G50.
This works only on Qualcomm models that are from G series of Motorola.
Recomended flashing stock android 12 to your phone to get NFC functionality back and for bluetooth disconecting there is a workaround by going to Phh's treble settings and enabling "Force Disable A2DP offload"
What will you need?​
Motorola's fastboot tools (attached to thread.) Update these don't work now. Use latest version of fastboot.
Unlocked bootloader
blank vbmeta (Included with Fastboot.)
Generic System Image of your choice.
Unlocking bootloader will void your warranty and erase your data (If you have any important data you can backup in System settings or using LMSA tool, I am NOT responsible for any damage that you make. If you **** up you can always restore to stock by using LMSA tool from Motorola.
Click to expand...
Click to collapse
Download your GSI image. Because there isn't any TWRP recovery for G50 (ibiza) yet. We need to download GSI image with gapps like Pixel Experience or Lineage OS 19 with GMS.
Download fastboot and adb tools from Motorola. Since some features like "fastboot oem get_unlock_data" dosen't work
Unlock bootloader (If you have unlocked bootloader skip this step.). There's a guide on motorola site to help you unlock your bootloader. Here you have the guide https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a/
After unlocking bootloader we can go to installing our GSI.
Boot to bootloader. You can do it by turning off your phone and pressing at the same time Power + Volume down or using adb by "adb reboot bootloader"
After doing that you need to reboot to fastbootd. You can do it by typing in fastboot "fastboot reboot fastboot"
If you boot to a screen with bold red text written "fastbootd" we can go to erasing data and system partitions. But after we can do that we need to flash vbmeta.
Flash vbmeta.img to bypass AVB (Android Verified Boot.) : "fastboot --disable-verification flash vbmeta vbmeta.img" and wait until it says OK
If we did that we can erase system partition by typing in fastboot "fastboot erase system" If it says OK we can go to the next step
If we get "CANNOT RESIZE SYSTEM PARTITION" do this: "fastboot delete-logical-partition product_a" and "fastboot delete-logical-partition product_b"
Now it's time to flash our GSI. To do that just type "fastboot --u flash system *name of your gsi*.img
And wait until it flashes and DO NOT REBOOT!!!
After successful flash we need to type "fastboot -w"
And now you can reboot.
If you did everything and your device boots then congrats you did it. If you have questions or issues reply to this thread and I will do my best to help you!
And this is my first guide and I was scratching my head how to do that so yeah that took some time.
What roms are working?
As for midrangers some roms dosen't work fully, like HavocOS or AncientOS but i made a little list of compatible roms at current date (18.01.2022)
Pixel Experience 11
Pixel Experience 12
DotOS 5.2
AncientOS
CorvusOS
Phh's AOSP
Lineage OS
And other roms, list of these roms that work on this phone is available here
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Tested but not booting:
HavocOS (GSI discontinued.)
(Updating list until i'll get my phone back from repair.)
Known Issues
- All GSI that runs under Phh NFC does not work (Status: fixed check begining of the thread.)

Hello which GSI is the best
I'm thinking about lineageos a64 vb.
Is it ok?!

walidmerdji said:
Hello which GSI is the best
I'm thinking about lineageos a64 vb.
Is it ok?!
Click to expand...
Click to collapse
If you wanna clean Ui and smooth experience dotOS should be good for you.
Currently im using Pixel Experience 12 alpha and it works good. And im still working on nfc fix. If you have more questions feel free to ask me.
Also if you want to choose GSI you need an A/B version "arm64-ab".

TwelwePL said:
If you wanna clean Ui and smooth experience dotOS should be good for you.
Currently im using Pixel Experience 12 alpha and it works good. And im still working on nfc fix. If you have more questions feel free to ask me.
Also if you want to choose GSI you need an A/B version "arm64-ab".
Click to expand...
Click to collapse
fastboot reboot fastboot
Error unknown target fastboot!
There is no such command on fastboot!

walidmerdji said:
fastboot reboot fastboot
Error unknown target fastboot!
There is no such command on fastboot!
Click to expand...
Click to collapse
If your device is on turn it off.
Press Power + Volume down and hold till you get an android bot laying and then type fastboot reboot fastboot

TwelwePL said:
If your device is on turn it off.
Press Power + Volume down and hold till you get an android bot laying and then type fastboot reboot fastboot
Click to expand...
Click to collapse
Hi
I flashed 100s of phones using fastboot
I'm aware of how to boot to fastboot and using cmd
The thing is there is no such command for fastboot
Fastboot reboot bootloader takes you to the same window
However I managed to boot to fastbootd
Using phone terminal
su reboot fastboot
But again my phone is rooted (magisk) so I don't think if I can flash a GSI on a rooted phone

walidmerdji said:
Hi
I flashed 100s of phones using fastboot
I'm aware of how to boot to fastboot and using cmd
The thing is there is no such command for fastboot
Fastboot reboot bootloader takes you to the same window
However I managed to boot to fastbootd
Using phone terminal
su reboot fastboot
But again my phone is rooted (magisk) so I don't think if I can flash a GSI on a rooted phone
Click to expand...
Click to collapse
I forgot to add that booting to fastbootd mode and flashing gsi with Magisk it will just simply bootloop. By flashing stock boot image gsis run flawlessly but HavocOS dosen't want to boot. I'll make a quick video how to do this if you need more context.

walidmerdji said:
Hi
I flashed 100s of phones using fastboot
I'm aware of how to boot to fastboot and using cmd
The thing is there is no such command for fastboot
Fastboot reboot bootloader takes you to the same window
However I managed to boot to fastbootd
Using phone terminal
su reboot fastboot
But again my phone is rooted (magisk) so I don't think if I can flash a GSI on a rooted phone
Click to expand...
Click to collapse
Hi, again.
I've made a video that could help you flash gsi on your Moto G50
If you have more issues you can dm me on xda.
Thomas, TwelwePL.

Hello, can I use this guide and the file provided to flash my Chinese version of this phone (ibiza_retcn). It has 8gb if ram, 128gb of storage and no NFC. Everything else seem the same (CPU is snap)

dynia said:
Hello, can I use this guide and the file provided to flash my Chinese version of this phone (ibiza_retcn). It has 8gb if ram, 128gb of storage and no NFC. Everything else seem the same (CPU is snap)
Click to expand...
Click to collapse
Yeah! Fastboot and vbmeta are correct for the ibiza-retcn. But if you mess something up you can revert back to stock using motorola's tool LMSA. Currently I have my moto g50 in repair center because i forgot that you cannot relock bootloader on motorola phones. And please be careful, if you'll be stuck on bootloop when you flashed some gsi, it isn't bricked just flash another. Some gsis dosen't always work on this phone. Tommorow I will prowide list of compatible gsis that will work on this phone.

TwelwePL said:
Hi, again.
I've made a video that could help you flash gsi on your Moto G50
If you have more issues you can dm me on xda.
Thomas, TwelwePL.
Click to expand...
Click to collapse
Nice language in Your device
Thx for the guide, lacking TWRP or any custom recovery, could be a pain... However old-school methods are still 'a gold skills'.
See U around!

Hello,
Just a small FYI - Pixel Experience A12 boots and so far works OK as well
If I manage to implement root solution, I will stay with it for a little bit longer.
Wish U all good day!

Voytec83 said:
Hello,
Just a small FYI - Pixel Experience A12 boots and so far works OK as well
If I manage to implement root solution, I will stay with it for a little bit longer.
Wish U all good day!
Click to expand...
Click to collapse
Thanks u too,
Currently my motorola is in repair because i bricked it. Now waiting for them to call me and pick my phone up. I'm happy that my guide worked for you!
For root like Magisk I had almost done Magisk but with "Task Failed Succesfully" by making to bootanimation and not booting. About In Februrary or March magisk should be working.
After texting motorola they release their MyUX A12 on Februrary If you're interested.
Wish that your phone with PE12 will work without any issues (only nfc

Update 14.02.2022
- Magisk is working with Pixel Experience 12 V401

TwelwePL said:
Update 14.02.2022
- Magisk is working with Pixel Experience 12 V401
Click to expand...
Click to collapse
Thanks very much for the guide. I now have Pixel Experience 12 V402 working.
I tired to get magisk working (patched boot.img in the magisk app then back to fastbootd and "fastboot flash boot magisk_boot.img" but it boot loops. I also tried flashing to both boot_a and boot_b.
Can you tell me how you got this working?

bejam said:
Thanks very much for the guide. I now have Pixel Experience 12 V402 working.
I tired to get magisk working (patched boot.img in the magisk app then back to fastbootd and "fastboot flash boot magisk_boot.img" but it boot loops. I also tried flashing to both boot_a and boot_b.
Can you tell me how you got this working?
Click to expand...
Click to collapse
When PE12 v401 got released the Magisk app appeared in app drawer and it just needed to reboot to setup magisk so i did that and Magisk worked flawlessly. It also worked on my A50 so i didn't patched the boot.img

TwelwePL said:
[cut]
Click to expand...
Click to collapse
many many many thanks for this thread. I was very suprised to see that this cheap smartphone had so little support from the bigger custom roms (like, for instance lineageos). I will try pixelexperience - can you please provide some help identifying which "codename" is hould download to flash my Motog50?
Thanks again

Any Degoogled ROMs for this device? Currently I am on stock rooted with magisk but with many problems like GPS not working correctly and some motorola update reminders popping out. Any help Highly appreciated

You can try Phh's AOSP with FLOSS variant degoogled and open source apps.

TwelwePL said:
You can try Phh's AOSP with FLOSS variant degoogled and open source apps.
Click to expand...
Click to collapse
Thank you. Can you provide any link? Got this: https://github.com/phhusson?tab=repositories but can't fiuguere ot which repo is the right one

Will my Google account be banned for using Pixel Experience?

I think I can be banned for getting fake unlimited google photos storage but im not sure

XDAC1234 said:
I think I can be banned for getting fake unlimited google photos storage but im not sure
Click to expand...
Click to collapse
No it will not be banned

thanks, I already flashed and unflashed pixel experience tho lol, it was kinda laggy
Manjotbenipal said:
No it will not be banned
Click to expand...
Click to collapse

Manjotbenipal said:
No it will not be banned
Click to expand...
Click to collapse
btw do u know if i should install magisk the zip flash way or the patched boot.img way?

I always roo with fastboot method
But remember that you must disable avb before flashing the patched img.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot patched_boot.img
If you skip disableing avb then you are sure to be stuck in a bootloop coz I have faced it myself.
And if you flash the recovery first then again i recommend you to follow the same step of disabling avb before flashing recovery.img
AND YOU CAN FOLLOW GUIDE IN THIS DEVICE'S FORUM
Btw which miui version are you using?

XDAC1234 said:
thanks, I already flashed and unflashed pixel experience tho lol, it was kinda laggy
Click to expand...
Click to collapse
You can uninstall bloatware with adb once you root your mobile and then install an mtz theme.
You will not even feel like you are using miui after doing that.
Btw should I make a thread on uninstalling bloatware with adb?

Manjotbenipal said:
I always roo with fastboot method
But remember that you must disable avb before flashing the patched img.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot patched_boot.img
If you skip disableing avb then you are sure to be stuck in a bootloop coz I have faced it myself.
And if you flash the recovery first then again i recommend you to follow the same step of disabling avb before flashing recovery.img
AND YOU CAN FOLLOW GUIDE IN THIS DEVICE'S FORUM
Btw which miui version are you using?
Click to expand...
Click to collapse
[Guide] Root for Redmi Note 9 - Mediatek (Helio G85)
Preamble: After a bit of research, I've found a simple way to - at least - obtain root privileges on the basic version of Redmi Note 9 (Mediatek - Helio G85). The procedure has been tested on a Redmi Note 9 Global NFC 4/128 (Model: M2003J15SG)...
forum.xda-developers.com
You can skip erasing userdata and cache coz it will reset your mobile.
But if you don't want to take any risk and decide to reset then REMEMBER THE PASSWORD OF YOUR MI ACCOUNT
after reset your phone will be locked until you verify your mi account.
Make sure to backup all the data on your phone before flashing

Manjotbenipal said:
You can uninstall bloatware with adb once you root your mobile and then install an mtz theme.
You will not even feel like you are using miui after doing that.
Btw should I make a thread on uninstalling bloatware with adb?
Click to expand...
Click to collapse
If you want to, that thread would be gladly appreciated, I couldnt get debloat (the magisk module) to work in the terminal emulator

Manjotbenipal said:
I always roo with fastboot method
But remember that you must disable avb before flashing the patched img.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot patched_boot.img
If you skip disableing avb then you are sure to be stuck in a bootloop coz I have faced it myself.
And if you flash the recovery first then again i recommend you to follow the same step of disabling avb before flashing recovery.img
AND YOU CAN FOLLOW GUIDE IN THIS DEVICE'S FORUM
Btw which miui version are you using?
Click to expand...
Click to collapse
huh, I didnt flash vbmeta before and my phone was fine (I had it rooted before pixel experience)
btw im using miui 12.5.6.0 RJOEUXM

SymtaxError said:
huh, I didnt flash vbmeta before and my phone was fine (I had it rooted before pixel experience)
btw im using miui 12.5.6.0 RJOEUXM
Click to expand...
Click to collapse
Then you can try but be careful

Manjotbenipal said:
Then you can try but be careful
Click to expand...
Click to collapse
nah, better safe than sorry (that idiom makes no sense but whatever)

General Unofficial TWRP Image Leak

I have eagerly been waiting for the release of a TWRP image or MSM tool for this device, to no avail
I have seen on one of these posts, found here, a potentially working TWRP image.
Currently it is just the twrp.img without any zip
Directly download it here
As said below, this should be flashable within magisk to install
- I have NOT tested this personally
- I am not advising anybody try this image either
- Password decryption appears to not be functional
- This appears to only function on Android 13
sm8450 A13 Kernel Source Compile Issues
2023/02/16 UPDATE!!!! https://github.com/OnePlusOSS/android_kernel_msm-5.10_oneplus_sm8450/issues/4 if u want test it ---> https://github.com/negroni-development/oneplus-sm8450_t_13.0_10pro referenced by X5Pro based severecold's work.(compiles...
forum.xda-developers.com

It should be able to flash into magisk, but there is no guarantee that flashing into rom can enter the system

PlasmaTornado said:
I have eagerly been waiting for the release of a TWRP image or MSM tool for this device, to no avail
I have seen on one of these posts, found here, a potentially working TWRP image.
Currently it is just the twrp.img without any zip
- I have NOT tested this personally
- I am not advising anybody try this image either
- Password decryption appears to not be functional
- This appears to only function on Android 13
sm8450 A13 Kernel Source Compile Issues
2023/02/16 UPDATE!!!! https://github.com/OnePlusOSS/android_kernel_msm-5.10_oneplus_sm8450/issues/4 if u want test it ---> https://github.com/negroni-development/oneplus-sm8450_t_13.0_10pro referenced by X5Pro based severecold's work.(compiles...
forum.xda-developers.com
Click to expand...
Click to collapse
we need testers

TrajanoX3 said:
we need testers
Click to expand...
Click to collapse
Agreed. I'm sure there are some people willing to give it a shot.
I haven't flashed an image since split partitions has existed, which is a fairly long time now
Even with the OP10, I am still unrooted. TWRP provides just that extra bit of security to me

I tested the twrp. I flashed to A then flashed to B . Put phone to fastboot flashed using the fastboot commands
( fastboot flash recovery_a ) then flashed B using commands ( fastboot flash recovery_b ) . From fastboot went to recovery . Booted up twrp recovery . Change language to English ( second from bottom right ) . Completed backup , reboot phone ok . Then went back into fastboot and reboot to twrp recovery. So its seems to be working ok so far.

Canuck Knarf said:
I tested the twrp. I flashed to A then flashed to B . Put phone to fastboot flashed using the fastboot commands
( fastboot flash recovery_a ) then flashed B using commands ( fastboot flash recovery_b ) . From fastboot went to recovery . Booted up twrp recovery . Change language to English ( second from bottom right ) . Completed backup , reboot phone ok . Then went back into fastboot and reboot to twrp recovery. So its seems to be working ok so far.
Click to expand...
Click to collapse
Fantastic! Can you confirm that it can decrypt without any issues?

Its working good

Canuck Knarf said:
I tested the twrp. I flashed to A then flashed to B . Put phone to fastboot flashed using the fastboot commands
( fastboot flash recovery_a ) then flashed B using commands ( fastboot flash recovery_b ) . From fastboot went to recovery . Booted up twrp recovery . Change language to English ( second from bottom right ) . Completed backup , reboot phone ok . Then went back into fastboot and reboot to twrp recovery. So its seems to be working ok so far.
Click to expand...
Click to collapse
we donate screenshot

heres recovery log from TWRP

Canuck Knarf said:
heres recovery log from TWRP
Click to expand...
Click to collapse
Are you using twrp right now?

TrajanoX3 said:
Are you using twrp right now?
Click to expand...
Click to collapse
Yes

Canuck Knarf said:
Yes
Click to expand...
Click to collapse
Can you send us a screenshot of twrp?

Canuck Knarf said:
Sim
Click to expand...
Click to collapse
Thanks for the screenshots, did you flash magisk through twrp?

Canuck Knarf said:
Yes
Click to expand...
Click to collapse
Magisk installation working probably by twrp?

just installed Magisk

TrajanoX3 said:
we donate screenshot
Click to expand...
Click to collapse
then install and flash partition A and then partition B and relapse to recovery?

Yes
fastboot flash recovery_a then fastboot flash recovery_b then reboot to recovery from fastboot . then change language ...cause its in Chinese

Oh and Twrp works with screen password lock so no need to disable it

Canuck Knarf said:
Oh and Twrp works with screen password lock so no need to disable it
Click to expand...
Click to collapse
how do you operate

Beware, this twrp.img is not bootable. Command fastboot boot twrp.img won't work, you will get bootloop into OP logo. Rebooting into fastboot mode and doing fastboot boot stockboot.img will help.
So it means you can only flash it directly. Confirmed by me and three others.