/* Disclaimer */
Code:
* Your warranty already voided due to Knox tripped.
* I am not responsible for bricked devices
* Do With Your Own Risk
/* Introduction */
Code:
Custom kernel made from me based on my taste.
The main goal is achieving general improvement on daily usage without doing ridiculous modification.
/* Features */
Code:
deKnoxed.
Simple Low Memory Kernel.
Improvement in CAF code.
/* Kernel Installation */
Download this kernel.
reboot to custom recovery
flash it.
done.
/* Download link */
github
/* Source Code */
github
reserved
reserveed2
In which ways this kernel improves over the stock one ?
viktor92 said:
In which ways this kernel improves over the stock one ?
Click to expand...
Click to collapse
sorry i forgot to mention there is few patches to improve kgsl and cpu idling.
I want to try it, but how can I return to stock if I want to ?. I've made a backup of stock kernel with EX manager, but it's an .img way bigger than yours, should I flash it as an img from TWRP and that's all ?
viktor92 said:
I want to try it, but how can I return to stock if I want to ?. I've made a backup of stock kernel with EX manager, but it's and .img way bigger than yours, should I flash it as an img from TWRP and that's all ?
Click to expand...
Click to collapse
that's okay, you have a whole boot partition. it has ramdisk, kernel, etc. in the other hand mine only have "kernel" inside the zip. that's why it is smaller than full back up
Flashed without problems, and the initial impresions are, the phone flies !, and I don't think it's placebo effect.
Great job !!
viktor92 said:
Flashed without problems, and the initial impresions are, the phone flies !, and I don't think it's placebo effect.
Great job !!
Click to expand...
Click to collapse
Am I able to flash this on my A71 SM-A715F stock rom
Nasruddin786 said:
Am I able to flash this on my A71 SM-A715F stock rom
Click to expand...
Click to collapse
yup, for now it is intended for stock A11 BUB5
faizauthar12 said:
yup, for now it is intended for stock A11 BUB5
Click to expand...
Click to collapse
Please add kcal color control the next version
Is there any android 10 kernel, for improved performance?
Is this kernel also working with the lineage 18.1 build?
hans3103 said:
Is this kernel also working with the lineage 18.1 build?
Click to expand...
Click to collapse
no, it won't work.
Hi Faiz, would you update your kernel for the latest firmware ?
Hello Faiz, please make a kernel with overclock support for my Galaxy A71. I need some extra performance
viktor92 said:
Hi Faiz, would you update your kernel for the latest firmware ?
Click to expand...
Click to collapse
I will try.
Zylon77777 said:
Hello Faiz, please make a kernel with overclock support for my Galaxy A71. I need some extra performance
Click to expand...
Click to collapse
sorry i won't
possible to use this on M51 device?
both have same kernel board
Lvblanc said:
possible to use this on M51 device?
both have same kernel board
Click to expand...
Click to collapse
no, there is a specific config for a71 that doesn't present for m51 and vice versa.
Will this work on a71 buc1 firmware?
Related
WARNING: This ROM probably still has intermittent emergency dialing issues. Do not use it for a daily driver when you're out or could need 911 or any emergency number. If you STILL choose to use it at those times, it's your own fault!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
DO NOT USE AS A DAILY DRIVER
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Known Issues
Probably intermittent emergency dialing issues (such as 911) like CM7 and CM9
See the rest of the issues here.
Please report new issues here:
http://code.google.com/p/vibrant-cm/issues/list
Downloads
Did you read known issues? No? Go read them.
20120816: Androtransfer.com | MD5: 19c1e1c3440ed593ed6ab98fe1ead4d2
Google Apps: gapps-jb-20120726-signed.zip
How to Install
Upgrading from CM9 or CM7
Do a nandroid backup (just in case)
Wipe & factory reset
Install from ZIP
Reboot
Upgrading from an older version of CM10
Do a nandroid backup (just in case)
Install from ZIP
Optionally install the Google Apps add-on.
Reboot
WARNING: If you use Titanium Backup to backup your apps do not backup system data or system apps.
FAQ
Q: I can't add my Google account!
A: Install the Google Apps package from CWM recovery, linked above. This is standard procedure with CyanogenMod ROMs due to licensing issues with Google.
Q: Will /datadata be in the next version?
A: Keep in mind that this is not a KANG. Read more about /datadata and why it was removed here
Q: How is this different from the other thread in the Development forum?
A: That ROM is a port of an unofficial build of CM10. This is a build of CM10 from sources for the Vibrant.
Q: Do I need the su fix from the other thread?
A: Please refrain from using fixes from that ROM.
Q: Why isn't YYMMDD up yet? It's up on the SGS thread.
A: The versions don't necessarily match up and a change in one may not be in the other.
Changelog
Code:
20120816
* Notification icon animation fix
* /data is now on OneNAND and /system is on MoviNAND (from pawitp)
* Boot animation should now not freeze. (It can still lag though)
* Better lockscreen weather timestamp
* WIPES DEVICE.
20120807
* Another libgps ABI fix
* Back to kill now works.
* Synced merged commits from [url=http://r.cyanogenmod.com/#/q/status:merged+branch:jellybean,n,z]Gerrit[/url]
20120803
* GPS no longer crashes upon toggling and hopefully will be more stable upon 911/emergencies (not sure what would've happened if you called on V8)
* AriesParts now loads.
* Synced repos (merged changes)
v8
* Synced repos (AriesParts now doesnt crash)
* GPS still broken (crashing after a few toggles, so [b]leave it on!![/b])
v7
* Synced repos
* Kernel doesn't ramp anymore while touching (will come back later)
v6
* Froyo RIL fixed (the Unknown Baseband report)
* Froyo GPS libs! (Tell me how it works)
* Kernel OC not crashing now
* Kernel frequency limited to 800mHz+ while touching
* Synced (lockscreen targets, background, etc)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Will be sure to try it out later today! Thanks FE.
Since I'm not much of a dev, what exactly is RIL, and what does it do?
Also, all the other functions work? Network/audio/wifi etc? DANG FE, you've been to work
Thank again to everyone who contributed to this!
edit: my chrome is acting up, what is the file size of this download?
As a reminder, I would like the other guys to not spam this thread and keep this as much as to developmental and testing as possible.
Thank FE
Sent from my SGH-T959 using xda app-developers app
Thats good news didnt boot for me either when i built it a couple days ago..
Question about the kernel ramdisk, did you simply use ICS ramdisk but with pawitps areis-common init.aries.rc and init.aries.usb.rc? or were other changes needed?
Thanks Fault xD
xriderx66 said:
Will be sure to try it out later today! Thanks FE.
Since I'm not much of a dev, what exactly is RIL, and what does it do?
Also, all the other functions work? Network/audio/wifi etc? DANG FE, you've been to work
Thank again to everyone who contributed to this!
As a reminder, I would like the other guys to not spam this thread and keep this as much as to developmental and testing as possible.
Click to expand...
Click to collapse
Audio and wifi work, all this stuff is courtesy aries-common and pawitp. (My aries-common port didn't have working audio, but had wifi I think)
RIL = Radio Interface Layer and is responsible for communicating with the baseband. So basically you'll have no GSM or telephony.
trailblazerz11 said:
Thats good news didnt boot for me either when i built it a couple days ago..
Question about the kernel ramdisk, did you simply use ICS ramdisk but with pawitps areis-common init.aries.rc and init.aries.usb.rc? or were other changes needed?
Thanks Fault xD
Click to expand...
Click to collapse
It's the JB ramdisk afaik since it's CM10; so JB init.rc etc plus copied pawitp's init.aries.rc for the vibrantmtd device tree.
@xriderx66 the file is 141MB
Sent from my SGH-T959 using xda app-developers app
Reserved.
Sent from my SGH-T959 using Tapatalk 2
Is RIL disabled for now? so we wont get kernel panic? or is there a way to load it?
Thanks
trailblazerz11 said:
Is RIL disabled for now? so we wont get kernel panic? or is there a way to load it?
Click to expand...
Click to collapse
Disabled for now in the ramdisk. (Which means flashing another kernel like Devil will accidently re-enable it) I do NOT recommend enabling it, you will get kernel panic galore...
nbhnohome said:
I love you , FaultException
Click to expand...
Click to collapse
FaultException said:
Disabled for now in the ramdisk. (Which means flashing another kernel like Devil will accidently re-enable it) I do NOT recommend enabling it, you will get kernel panic galore...
Click to expand...
Click to collapse
I asked because I had a similar issue when I compiled a kernel with Linaro 4.7, might be same with 4.6 toolchain kernel is now compilied with (right?) .
Kernel would panic and crash to recovery upon starting to load RIL.
It is fixed by compiling samsung_modemctl with 4.3.3 toolchain and using it as a prebuilt.
Hopefully that helps? or probably a different issue completely xD
trailblazerz11 said:
I asked because I had a similar issue when I compiled a kernel with Linaro 4.7, might be same with 4.6 toolchain (right?) kernel is now compilied with.
Kernel would panic and crash to recovery upon starting to load RIL.
It is fixed by compiling samsung_modemctl with 4.3.3 toolchain and using it as a prebuilt.
Hopefully that helps? or might be a different issue.
Click to expand...
Click to collapse
Probably yeah. pawitp patched modemctl already, my repo sync may have neglected to update the kernel cause I had changes. I'll try again later.
Edit: here's his patch: http://review.cyanogenmod.com/#/c/19167/
Is this related to the ROM posted for the international galaxy s posted here: http://forum.xda-developers.com/showthread.php?t=1775169 ?
go_l_den said:
Is this related to the ROM posted for the international galaxy s posted here: http://forum.xda-developers.com/showthread.php?t=1775169 ?
Click to expand...
Click to collapse
They're both built off CM10. Don't know if they're using the same aries-common, possibly.
So, installed it over ics Rom and everything works as advertised. Thanks, FE. It's more than just a teaser.
Sent from my SGH-T959 using Tapatalk 2
Awesome! Thanks! Looks insane, can't wait for cm10!:cyclops::cyclops::cyclops::cyclops:
I just flashed the CM10 teaser and Devil 1.0.0-RC3 ICS\JB kernel and RIL Cell/Data is working perfect so far and everything is silky smooth so far. Unfortunately I can't get superuser working and it just causes boot loops. If anyone wants to try the latest Devil kernel or JB gapps you can get it from his ftp @ http://devil.haxer.org/jellybean/. Thank you for the little tease FE and with Devil kernel RIL has been functional so far and once root gets fixed I will go back to CM10.
hurtz777 said:
I just flashed the CM10 teaser and Devil 1.0.0-RC3 ICS\JB kernel and RIL Cell/Data is working perfect so far and everything is silky smooth so far. Unfortunately I can't get superuser working and it just causes boot loops. If anyone wants to try the latest Devil kernel or JB gapps you can get it from his ftp @ http://devil.haxer.org/jellybean/. Thank you for the little tease FE and with Devil kernel RIL has been functional so far and once root gets fixed I will go back to CM10.
Click to expand...
Click to collapse
The su binary is not in yet. But once again, shouldn't be used as a daily driver.
Server must be jammed. Won't dl for me.
Sent from my SGH-T959 using xda app-developers app
CyanogenMod 11.0 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
These are the nightly builds of CM11.0 for the HTC One Mini 2.
To hear about the latest updates and changes to CyanogenMod as a whole, you can follow +CyanogenMod on Google+!
You can also follow me if you want.
Code:
#include <stddisclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions
You must unlock your bootloader or be S-OFF.
You must have a custom recovery installed that allows SELinux. See here for a TWRP build for One Mini 2
Download the current HTC One Mini 2 build from the CyanogenMod site.
Locate Gapps here.
Fully wipe your device from Recovery if you are not coming from CM11.0 already.
Reboot into recovery and install.
XDA:DevDB Information
CyanogenMod for HTC One Mini 2, ROM for the HTC One Mini 2
Contributors
u-ra
Source Code: https://github.com/u-ra
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-07-09
Last Updated 2015-01-24
Reserved
Very good job from what I've seen so far. Maybe cm bugs, but during call can't turn off loudspeaker mod (but if you don't turn it on, everything's ok. Sound buzz while playing music (ram?) through headphones + phone doesn't ring (but notifications do ring)
A friend of mine is interested in using this ROM - I would install it for her if there was a list of known bugs. That said, are there any known bugs?
Also, as a more general question, how come this device is so quiet in terms of development? Has HTC not released the source code or something?
magic_android said:
A friend of mine is interested in using this ROM - I would install it for her if there was a list of known bugs. That said, are there any known bugs?
Also, as a more general question, how come this device is so quiet in terms of development? Has HTC not released the source code or something?
Click to expand...
Click to collapse
I'm not aware of any major bugs. There are some small problems with audio routing, I hope to have these sorted out soon.
Having said that, if you need to install this for someone maybe they should not be using it. It's still not 100% release quality.
New build. Lots of bugs fixed, hopefully not that many introduced. Product name is changed to "memul", so you'll have to update your recovery. See the TWRP thread for the update.
u-ra said:
New build. Lots of bugs fixed, hopefully not that many introduced. Product name is changed to "memul", so you'll have to update your recovery. See the TWRP thread for the update.
Click to expand...
Click to collapse
Good stuff dude, thanks. Is this compatible with the HTC One Remix (the verizon version)? If it is, that'd be really good. The main problem I'm having right now is rooting it, I tried a method that was in a different thread but it didn't work for me.
Dyelon said:
Good stuff dude, thanks. Is this compatible with the HTC One Remix (the verizon version)? If it is, that'd be really good. The main problem I'm having right now is rooting it, I tried a method that was in a different thread but it didn't work for me.
Click to expand...
Click to collapse
I'm not sure. It probably isn't. Can you attach the output of adb shell getprop?
is there no need to root for the installation of this rom
nsnobel2 said:
is there no need to root for the installation of this rom
Click to expand...
Click to collapse
No need to root, but you need to unlock your bootloader so you can install a custom recovery.
Hi. Sorry for asking, but any news about updates? Any plans for adding Mini 2 to oficial CM 11 device list?
da900 said:
Hi. Sorry for asking, but any news about updates? Any plans for adding Mini 2 to oficial CM 11 device list?
Click to expand...
Click to collapse
There will be updates next week, and yes, official support is planned.
u-ra said:
There will be updates next week, and yes, official support is planned.
Click to expand...
Click to collapse
Will there be a Verizon build for the HTC remix?
Thanks to "u-ra"
Hi,
I got my HTC One Mini 2 earlier this week and first thing I did was unlock it, change the recovery and install CM11.
I just want to say thanks "u-ra" for your work on CM11 for our device.
The ROM works perfect I have not a single issue with it.
regards,
mister.knister
jameskyt said:
Will there be a Verizon build for the HTC remix?
Click to expand...
Click to collapse
Only if someone steps in and adds support. I'm from Europe so I can't really help you there.
mister.knister said:
Hi,
I got my HTC One Mini 2 earlier this week and first thing I did was unlock it, change the recovery and install CM11.
I just want to say thanks "u-ra" for your work on CM11 for our device.
The ROM works perfect I have not a single issue with it.
regards,
mister.knister
Click to expand...
Click to collapse
What's the point buying a powerful phone if you not going to use not even half of its capability's?
kativiti said:
What's the point buying a powerful phone if you not going to use not even half of its capability's?
Click to expand...
Click to collapse
i'm confused what you are asking exactly..
pandasa123 said:
i'm confused what you are asking exactly..
Click to expand...
Click to collapse
me too...Why would I use "not even half of its capability's" just because I changed from Stock ROM to CM11?
New build is up.
mister.knister said:
me too...Why would I use "not even half of its capability's" just because I changed from Stock ROM to CM11?
Click to expand...
Click to collapse
Or does that one mean that switching to CM11 IS using all it's capabilities?? Dunno... Running the CM11 builds myself and apart from a reboot every 2 days it seems very stable!
Kudos u-ra.
apologies for quick post. based on mk2000 v1.3 source.
cpu clocks - big/2496 - small/2419 - gpu clock - 770
bullfrog H870
http://www.mediafire.com/file/ntzc04x2quvwl9v/H870_v5.1.15-BULLFROG.zip/file
monster H870
http://www.mediafire.com/file/4auwg47du4gah8u/MONSTER_HIGHLY_EXPERIMENTAL_H870_OREO_STOCK_1.1.0.zip/file
i will be editing it with more info when i got more time. feel free to ask anything. the links are currently only for H870
thanks: askermk2000 for the source and beany23 for schooling
many, many improvements, optimizations and fixes implemented of whom ive lost track. some of them include better battery life, memory leak fixes and memory latency improvement. force encrypt removed along with dm verity.
NEW KERNEL SOON-NEW SOURCE-NEW TOOLCHAIN
XDA:DevDB Information
Bullfrog&MONSTER, Kernel for the LG G6
Contributors
zaebwolf
Source Code: https://github.com/stendro/msm8996_lge_kernel/tree/mk2000-oreo
Kernel Special Features:
Version Information
Status: Testing
Created 2019-03-19
Last Updated 2019-03-22
so...
What is this exactly? More info...
DJPRMF said:
so...
What is this exactly? More info...
Click to expand...
Click to collapse
Kernel for Stock OS. By far one of the best I have tried. Scored over 183k on Antutu (Bullfrog Kernel). Monster Kernel scores over 250-300k+ but it is experimental.
Zae keep up the good work man.
is it only for archieving good benchmarks or does it actually is good for perfomance and battery life?
StarSix01 said:
is it only for archieving good benchmarks or does it actually is good for perfomance and battery life?
Click to expand...
Click to collapse
for now only for benchmarks (monster) tho it is usable with couple playback issues.
zaebwolf said:
for now only for benchmarks (monster) tho it is usable with couple playback issues.
Click to expand...
Click to collapse
Where is us997 link?
Vortell said:
Where is us997 link?
Click to expand...
Click to collapse
sorry for now only H870. i will compile for other g6 models tomorrow and upload new branch KATANA which is much smoother then BULLFROG.
Is this only for stock or can it be flashed on the custom ROMs like havoc and PE
LLoTE said:
Is this only for stock or can it be flashed on the custom ROMs like havoc and PE
Click to expand...
Click to collapse
read title.
How do I flash it on my US997 and do I need to have root?
samsung striker said:
How do I flash it on my US997 and do I need to have root?
Click to expand...
Click to collapse
You need to have TWRP, flash it there.
samsung striker said:
How do I flash it on my US997 and do I need to have root?
Click to expand...
Click to collapse
There are no US997 versions yet. Read the first post.
I can't see download links
Any ideas?
Matt
The kernels are looking pretty promising
wanted to try them out ; But The TWRP keeps showing me an installation error
Any suggested method to flash them over the latest Android Pie Stock Rom ? , I am on LG G6 H870
I can't find root. And TWP. Help me please.
My a8 star
Its easy to root.
You just download twrp for g885y , its work to g885h.
Ubl_install twrp_flash magisk.
Tested on my a8 star oreo and pie.
Help
bukanpeterpan said:
Its easy to root.
You just download twrp for g885y , its work to g885h.
Ubl_install twrp_flash magisk.
Tested on my a8 star oreo and pie.
Click to expand...
Click to collapse
-rooting is done but we need custom roms and kernels like (oxygen-os or corvus-os) (d8g or lunix) from which we can overclock cpu-gpu. i have smart pack kernel but it cannot overclock at a maximum level because hardware can support more gpu-cpu capacity but kernel can't
purchasing this phone was the biggest mistake of my life
help if you can..?
mihir_1144 said:
-rooting is done but we need custom roms and kernels like (oxygen-os or corvus-os) (d8g or lunix) from which we can overclock cpu-gpu. i have smart pack kernel but it cannot overclock at a maximum level because hardware can support more gpu-cpu capacity but kernel can't
purchasing this phone was the biggest mistake of my life
help if you can..?
Click to expand...
Click to collapse
Their are no custom rom for this device.
mchlbenner said:
Their are no custom rom for this device.
Click to expand...
Click to collapse
Still no?
Can some build
I want to install LOLZ Kernel v17 on crDroid 7.13 or 7.12 but I was curious would I lose data if I flag the kernel like do I need to do a full clean install
cause from the instructions I see it only flashes system and vendor
anyone here ever used that kernel with crDroid 7.12 and 7.13?
nope, installing kernels isnt required to do that. if youre still on crdroid, extract your boot and dtbo, thats your default kernel. on here, only lolz is released, but there are a fea other kernels for our devices
fonzacus said:
nope, installing kernels isnt required to do that. if youre still on crdroid, extract your boot and dtbo, thats your default kernel. on here, only lolz is released, but there are a fea other kernels for our devices
Click to expand...
Click to collapse
Have you tried LOLZ Kernel? what do you think about it? or even if you recommend other ones
yep, im currently on havoc 4.14 and lolz 17. the default kernel was buggy, lots of noticeable issues. then i switched over to another kernel not available here and saw some improvements. lolz was a bit better, but id guess its the best kernel for olives.
i havent tried havoc 4.15 yet as it requires a full clean install, but i guess im lazy atm, there are lots of unannounced roms for our phones, pm me and ill give you a tg group to join and look at all the builders ;P
POQDavid said:
I want to install LOLZ Kernel v17 on crDroid 7.13 or 7.12 but I was curious would I lose data if I flag the kernel like do I need to do a full clean install
cause from the instructions I see it only flashes system and vendor
anyone here ever used that kernel with crDroid 7.12 and 7.13?
Click to expand...
Click to collapse
All instructions is on telegram @lolzkenel