Hi there,
Is it possible to change the CSC of my note9 SM-N960F from Australia (XSA) to Singapore (XSP)? I believe both are part of the multi CSC OXM firmware but there's little information on how to go about changing the CSC.
So far I've tried the following 2 methods but unfortunately, I'm still stuck on the XSA CSC.
Method 1:
- Power off the device
- remove the sim tray.
- Go to recovery , HOLD bixby button + Volume up together , and power up
- In recovery , chose factory reset .. This will give a warning and then reset everything
- Choose power off , in the recovery and insert sim tray .. you should do this before booting up as your CSC will be configured when you will start
- Power on the phone , wait and . then chose restart to system now when asked
- wait and after reboot. CSC remains unchanged
Method 2:
*#272*IMEI# to change CSC but I'm getting the "connection problem or invalid MMI code"
any input would be greatly appreciated!
hello
you can try this solution in post 67 : https://forum.xda-developers.com/ga...n960n-n960u-n960u1-n960w-n9600-t3833721/page7
regards
Hi, I have tried the solution in post #67 but my CSC is still XSA. Is it possible to just download the XSP OXM firmware and flash via odin without tripping knox?
at this time i'm unable to make a working N960 CSC file with only one CSC ( noboby is able to signe CSC file ) and as combination file don't work for this device the only solution is to find a working secret code
sorry and regards
I have N960U usa unloacked, on 8.1.
I also have Thai SIM CARD not in use.
There is any way i can upgrade to Pie 9.0 without loosing call recording?
If i get THL CSC on my N960U i think call tecording will work.
Sny way to do this?
METOD TO CHANGE CSC (tested on N960FD) Install this rom https://forum.xda-developers.com/galaxy-note-9/development/rom-galaxy-project-t3911947 choose csc. then you can come back to your rom, I came back because I like a lot of modifications but this rom is also nice. After this operation It should be good. it helped me. I had CSC BTU samsung and I could not change the method, I did not try with the combination rom because I did not want to play like that. I know that some roms have options to choose the csc at installation and I have used it.
I hope I helped
hello
here some details
i have samsung note 8 n950f
with this version
Product code CEL
PDA N950FXXU5CRHA
CSC N950FOXM5CRHA
(Cel = Cellcom) they are 1 of some providers here in israel
they still haven't get the update to one ui , and they also put some of their annoying apps in this rom...
i want to change it to this rom...
Product code ILO
PDA N950FXXU5CRHA
CSC N950FOXM5CRHA
(ILO - Clean rom) they are not a providers... they are the Official importer of samsung here at israel, and this is the reason they have a clean rom
i tried to flash via odin , but it stay the same.... the csc still CEL
and all the cellcom apps still there, what i did wrong?
how can i change it to ILO ?
(one more thing, my phone not rooted...)
thanks
Hello everyone! I made a tutorial regarding flashing the latest updates, flashing custom ROMs or unbricking your device:
Video guide:
Spoiler: Video
Steps:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
I hope it helps you!
Hello, I am trying to switch from an Orange operator rom to a Samsung XEF rom, the problem is that when I flash everything goes normally but the rom does not flash and remains in Orange rom. Yet I have no error message.
For some reason I can't get it to detect my phone after plugging it in. Odd.
AlphAndroid said:
For some reason I can't get it to detect my phone after plugging it in. Odd.
Click to expand...
Click to collapse
Does this require the samsung USB drivers?
AlphAndroid said:
Does this require the samsung USB drivers?
Click to expand...
Click to collapse
Yes. Windows is supposed to automatically install the drivers when you plug in your phone.
You may also install them by installing Smart Switch for PC.
give me custom rom first, then will worry how to flash it
Is there any reason (that we know of) why flashing an AT&T device to the unlocked ROM wouldn't work this year as it has in years past?
abowlby said:
Is there any reason (that we know of) why flashing an AT&T device to the unlocked ROM wouldn't work this year as it has in years past?
Click to expand...
Click to collapse
I went from ATT to Verizon without problems. Flashed the Unlocked ROM first and it was fine.
Thanks dude! Removed 409 files verizon bloat with guild and u1 updates as well
[QUOTE = "naudmick, příspěvek: 84390799, člen: 4461390"]
Hello, I'm trying to switch from the Orange operator to the Samsung XEF rom ROM, the problem is that when I blink, everything goes normally, but the ROM doesn't blink and stays in the Orange rom. I need to make a mistake.
[/ CITÁT]
I have the same problem I have orx and I would like xez, dbt multicsc rom via Odin didn't help either
edit:
Problem solved, via Samkey application, S21 5G is already supported
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
sivuha0101 said:
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
Click to expand...
Click to collapse
Thanks for that!
I am from Brazil and wanted to install my regional stock ROM but everytime I did it, it went back to my carrier's ROM.
What I did in this case was installing an OXM csc (the german DBT) and then trying again with my stock regional ROM (ZTO).
Removed my SIM card and didn't connect to wifi untill I was sure the stock ROM sticked to the phone.
PS: If anyone reading wants a rom from the OXM multipack and is having troubles, try using the Brazilian ZTO stock rom and then go back to yours.
Alvincp said:
Thanks for that!
I am from Brazil and wanted to install my regional stock ROM but everytime I did it, it went back to my carrier's ROM.
What I did in this case was installing an OXM csc (the german DBT) and then trying again with my stock regional ROM (ZTO).
Removed my SIM card and didn't connect to wifi untill I was sure the stock ROM sticked to the phone.
PS: If anyone reading wants a rom from the OXM multipack and is having troubles, try using the Brazilian ZTO stock rom and then go back to yours.
Click to expand...
Click to collapse
That's true. ZTO is part of a multi csc pack OWO, so it will work for OXM. Good job mate
My S21 Ultra 5G from AT&T is somehow not getting updates and seems to be stuck on ATLF firmware with the December 1, 2020 security patch. Called AT&T...they blamed Samsung and sent me to Samsung. Samsung blamed AT&T and wants me to travel 50 miles away to a Ubreakifix store (official Samsung repair center). Today I called again and AT&T had me factory reset the phone with the result being the same - - no update - software is up to date.
Frija seems to be downloading the newest AUC8 firmware when I put in the model of SM-G998U with ther correct US code which I hope is the AT&T rom.
Is the firmware from Frija safe?
sivuha0101 said:
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
Click to expand...
Click to collapse
hi there
I have done this recently, perhaps with a slight fail on my sight, since i updated to the latest OXM pack, since i wanted to switch to DBT from DTM (german telekom) without reading this thread and your post first. So my phone didn't switch from DTM to DBT. until yesterday i had to wait for the updated security patch for OWO pack to switch. So all went fine and i switched from DTM OXM to OWO and back to OXM again.
But basically here starts my problem (if it is a problem, not sure yet):
My phone switched not to DBT, instead it went to EUX, which i guess is the generic code for complete EU countries? i am not sure, since i couldn't find the sales code or CSC for this anywhere tbh. i have two SIM prepaid SIM cards from a third party o2 contractor, so normally (i have done it on my Note 10 plus), like you mentioned, it should ask you to customize your phone and switch to DBT, but for me it simply doesn't ask or go to DBT at all. It simply keeps the EUX. Which i would not have a problem with, when i get regular updates with it like i would on DBT.
If anyone could give me a hint how to change to DBT or what i did wrong, i would appreciate the help. If EUX is fine for getting updates, i am also fine with that, if someone can confirm this. on OWO the software updater said please contact a samsung service center, since i have german SIMs in the phone, but with OXM package and CSC on EUX currently it just says "software is up to date" so it can connect to the update servers if that helps.
A short pm would be appreciated or maybe some help from an experienced user (more than me lol) via telegram as well.
Cheers
Mike
Oy, when I try to run frija, it tells me I need to have Visual c++ 2008 installed?!
EDIT: Finally found the download for it, but Frija doesn't seem to have firmware for the S21+
I was working with someone to find a way to remove Retail Mode from our S21 (SM-G991U1 XAA), and when using Odin to flash, we accidentally used the same firmware BL file for every section of the install. Now the phone is stuck in download mode, and we can't find a firmware download with replacement AP or CP files. Only a single BL .md5 file, or a set of files that don't seem to fix the problem. I found a link here on the forums to what appears to be exactly what we need, but it takes hours to download for some reason, and then fails partway through each time. Always at a different point in the download, too. Sometimes it gets to 2.5GB, other times 3.7GB, but never the whole file. That link is over in this thread:
G991U and G991U1 Firmware Links and Flashing Discussion Here
This was the link I followed:
U1 firmware
Any thoughts? Any help getting pointed in the right direction would be much appreciated. !
thank you so much , what CSC country has Call recording setting ?
Bofahad said:
thank you so much , what CSC country has Call recording setting ?
Click to expand...
Click to collapse
I suggest Thailand (THL).
Hello there,
I have bought phone that was from different distribution than my country, everything is fine except I don't get any updates. I'd like to change my CSC code from BTU to XEO but without wiping the phone and without tripping Knox. I have read that it is possible by flashing HOME_CSC file. I downloaded the latest samsung original firmware from Sammobile and got five files. I know i should flash HOME_CSC but I dont know if I should flash all the other ones. Can you help me with the process and share some tips? Thanks
This thread may help you if you care to read 30 pages worth of posts:
Now you can not change CSC code with firmware + SIM-card
I could easily change the CSC code on my Note9: just installed OXM firmware + factory reset with needed code SIM-card (Thailand for example). But this method does not work anymore. How to change a CSC code on S10?
forum.xda-developers.com
Not possible without wipe. More here https://forum.xda-developers.com/t/is-it-possible-to-change-csc.4215105/