Database Develop

Redmi note 9 - EDL flash - Need authorized Mi account

Hello,
i have problem with flashing redmi note 9 pro in edl mode.
I need authorized Mi account. Can somebody help me with it? Via teamviewer? Reward certain!
Thank you very much, Lukas

Edl mode is basically service center repair from xiaomi.You need ifu dongle or contact repair center.or black market not recommended do.

This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

explicate mejor

[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com

VD171 said:
This section is for MERLIN (redmi note 9).
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Only after it, you can use sp flash tool again.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Click to expand...
Click to collapse
Do I need to flash it via fastboot ?
I have already done it but my device is detected in com ports for only 2 seconds and then charging screen appears. I have also installed device filter(libusb).
And after flashing preloader by device doesn't stay in edl mode even I connect my phone while pressing and holding vol down .

(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
friend here you have the guide to remove the HARD BRICK from your mobile.
I hope it will be of your help.

Question Redmi note 10pro max Brick

my redmi note 10 pro max is bricked.
When I try to flash fastboot rom from mi flash tool it started then showing "Hello packets not found, then after 25sec Time out or may be device get disconnected"
Please help me on this I seach a lot everywhere asking to open back pannel and do sort circuit method, but i Dont want to open my device.
Please help me out.
PS: right now it's asking for EDl authentication if any firehouse file available please provide or please suggest how to bypaas edl authentication.

iam. thakur18 said:
my redmi note 10 pro max is bricked.
When I try to flash fastboot rom from mi flash tool it started then showing "Hello packets not found, then after 25sec Time out or may be device get disconnected"
Please help me on this I seach a lot everywhere asking to open back pannel and do sort circuit method, but i Dont want to open my device.
Please help me out.
PS: right now it's asking for EDl authentication if any firehouse file available please provide or please suggest how to bypaas edl authentication.
Click to expand...
Click to collapse
We need more details
Which ROM twrp unlocked bootloader?

Y
Laptapper said:
We need more details
Which ROM twrp unlocked bootloader?yes twrp unlocked... Asking for EDL authentication.
Click to expand...
Click to collapse

iam. thakur18 said:
Y
Click to expand...
Click to collapse
Booting in twrp isn't working?

Will it boot to fast boot mode or totally blank

Harsh Kemali said:
Will it boot to fast boot mode or totally blank
Click to expand...
Click to collapse
Totally blank

Try searching how to unbrick redmi phone through edl mode in youtube make sure u install Qualcomm drivers in your PC

Harsh Kemali said:
Try searching how to unbrick redmi phone through edl mode in youtube make sure u install Qualcomm drivers in your PC
Click to expand...
Click to collapse
Bro i had already searched... There are some youtuber who's asking for money

Question [Solved]Need patched firehose to fix my hard-bricked Redmi 9T

Hi.
i hard-bricked my Redmi 9T while trying to flash a custom rom
i cant boot into recovery or fastboot, i only see "Qualcomm HS-USB QDLoader 9008" in the device manager when i connect the phone
when i try to flash the stock rom using MiFlash i get an error saying my account is unauthorized
i googled it and apparently what i need is a patched firehose file to bypass this authorization check, or get someone with an authorized account to help
i searched a lot but never found a patched firehose that works for my phone
if someone can give me some directions as to where i can find this file or how to patch the original myself, that would be great
Thanks!
Edit:
I ended up paying a russian guy to help me flash with an authorized account
he is MOD EDIT: Content Removed if anyone is wondering

i also contacted the guy.. didn't avail his services
but he passed my scam mockup.. he is legit..

Just buy Miracle Xiaomi Tool Login Edition and flash all rawprogram xml in edl (9008) mode

is there any free solution for this? i'm broke af and i have the same problem

same problem

AhmedSamir72 said:
same problem
Click to expand...
Click to collapse
hmmm...i dont own thhis device but i think u can try this way by miflash
First of all, ur device have to have the BL unlocked. Maybe also 9008 works.
download the stock ROM from here
remember to scroll down and download the .tgz file
after it finished, extract it
and open miflash (recommend version)
select to the folder u just extracted, and refresh (f in fastboot with BL unlocked, it shows ur device number; if in 9008, it shows as COM port.)
choose erase all (don't lock)
then just press flash

Hi, If you entered the engineering firmware mode (EDL) and can not flash the phone without a service account:
1. Download the firmware from here ENGINEERING ROM
2. Check that the device would be defined as Qualcomm HS-USB QDLoader 9008 in the device manager when connect the phone
3. Firmware using MiFlash engineering rom from paragraph 1
4. Loading to engineering rom
5. Overload to Fastboot mode
6. We flash the rom you need through Miflash

chiron001 said:
Hi, If you entered the engineering firmware mode (EDL) and can not flash the phone without a service account:
1. Download the firmware from here ENGINEERING ROM
2. Check that the device would be defined as Qualcomm HS-USB QDLoader 9008 in the device manager when connect the phone
3. Firmware using MiFlash engineering rom from paragraph 1
4. Loading to engineering rom
5. Overload to Fastboot mode
6. We flash the rom you need through Miflash
Click to expand...
Click to collapse
this method will damage imei ,best way is to find the No auth firehorse and replace it with the one inside firmware folder,then use miflash

I found a thread where he made a firehose programmer for this device.
Here's the link: https://forum.xda-developers.com/t/solved-i-need-help-edl-9t-lime.4385727/

How To Guide Way to unbrick device in EDL

Hi, I probably found the way to flash ROM if device in edl without auth account:
Download latest MiFlash and fastboot rom
Unzip rom and go to /images folder
Choose prog_ufs_firehose_sdm7150.elf
Copy it to MiFlash folder
Go to EDL and type in cmd on PC in Mi Flash directory command attached as picture.
Wait until "OKAY" appears
After this reconnect phone in EDL and start flashing ROM INSTANTLY!!!

sorry what is edl?

stauros2653 said:
sorry what is edl?
Click to expand...
Click to collapse
EDL or Emergency DownLoad Mode
What is EDL Mode and How to Boot your Qualcomm Android Device into it
Android phones and tablets equipped with Qualcomm chipset contain a special boot mode which could be used force-flash firmware files for the purpose of unbricking or restoring the stock ROM.
www.thecustomdroid.com

theartyomm said:
Hi, I probably found the way to flash ROM if device in edl without auth account:
Download latest MiFlash and fastboot rom
Unzip rom and go to /images folder
Choose prog_ufs_firehose_sdm7150.elf
Copy it to MiFlash folder
Go to EDL and type in cmd on PC in Mi Flash directory command attached as picture.
Wait until "OKAY" appears
After this reconnect phone in EDL and start flashing ROM INSTANTLY!!!
Click to expand...
Click to collapse
Your instructions say to copy "prog_ufs_firehose_sdm7150.elf" but the image refers to "prog_emmc_firehose_sdm7150.elf" (sdm vs. emmc). Is this correct? Or which should it be?

It's the same. It depends from Miui version (I took that file from 12.5)

well if this true this guy needs a major award and this post needs a lot more attention as we would finally have a way to unbrick this device for free. Let also take the opportunity to wish all the people in telegram to go to hell for taking money to use their auth account to do it for other people (yes I DO believe it should be free for all)
Did anyone successfully try this on a bricked device?

Aryapars said:
well if this true this guy needs a major award and this post needs a lot more attention as we would finally have a way to unbrick this device for free. Let also take the opportunity to wish all the people in telegram to go to hell for taking money to use their auth account to do it for other people (yes I DO believe it should be free for all)
Did anyone successfully try this on a bricked device?
Click to expand...
Click to collapse
It definitely worked in 2019. I don't if it works right now (really hope so)

if it worked in 2019 then it can have chance to still work, with the same software setup / rom. But this device did not exist in 2019....
would you mind posting exact setup details, so that it can be verified by others?
which version of miflash, which rom (did you flash a rom for redmi note 10 pro with it?)
this needs to be verified, but I have no bricked device around, and dont want to try it just for fun with running device.

Aryapars said:
if it worked in 2019 then it can have chance to still work, with the same software setup / rom. But this device did not exist in 2019....
would you mind posting exact setup details, so that it can be verified by others?
which version of miflash, which rom (did you flash a rom for redmi note 10 pro with it?)
this needs to be verified, but I have no bricked device around, and dont want to try it just for fun with running device.
Click to expand...
Click to collapse
MiFlash 2018
It worked for lavender (Redmi Note 7) when it was in EDL
I used latest MiFlash to flash Redmi Note 10 Pro fastboot Miui 12.5

so you used mi flash to flash a rn10p device, which was not in bricked state, only?
but you didnt try it in bricked stage?
edit: I mean HARDBRICK, screenoff /EDL loop. not fastboot

Yes

ah well, then you basically just flashed via fastboot, no real unbrick.

Does it work?

That can't work unless he speciefies each single step and which exact file he used. EDL has an authetication scheme and if you don't have an authorized account then it won't work.

Question Hard brick (EDL MODE) (Qualcomm HS-USB QDLoader 9008)

Hello. Is there any solution to a hard brick for the phone? It has occurred when i was flashing a custom rom and now I'm stuck in edl mode. Any suggestions are welcome. Also, is there any patched firehose for the phone since flashing the stock rom with mi flash tool requires a mi authenticaion account to proceed.

vincczen said:
Hello. Is there any solution to a hard brick for the phone? It has occurred when i was flashing a custom rom and now I'm stuck in edl mode. Any suggestions are welcome. Also, is there any patched firehose for the phone since flashing the stock rom with mi flash tool requires a mi authenticaion account to proceed.
Click to expand...
Click to collapse
Please provide with more details