Related
1. Iniciar en AP Fastmode / Starts on AP Fastmode
2. Iniciar y ejecutar RSD Lite / Install and execute RSD Lite
3. Instalar 906 SBF XML File (Descomprimir primero .7z file) / Install 906 SBF XML File (uncompress 7z file first)
4. Dejar que inicie el móvil, transferir update.zip a la SD / Allow device to start and transfer update.zip to SD
5. Apagar y encender móvil presionando X + Power / Shutdown and power on pressing X + Power at start
6. Cuando aparezca el triángulo de Android Presionar Vol Down + Up / When the Android Triangle appears, press Vol Down + Up at once.
7. Factory Reset y Wipe Cache / Factory Reset y Wipe Cache
8. Elegir "Update from SD Card" / Chose "Update from SD Card"
9. Seleccionar la carpeta update.zip / Select the update.zip compressed folder
10. Una vez instalada la actualización, iniciar el móvil / When update was installed, starts device normally
11. Personalizar al gusto / Personalize device
12. En "Settings -> Applications -> Developing Tools -> Debug mode" marcar / At "Settings -> Applications -> Developing Tools -> Debug mode" check
13. Ejecutar "motofail\run.bat" / Execute "motofail\run.bat"
14. Esperar... / Wait...
15. Listo, .906 y root en acción / Ready .906 and root running
Download Package Link (Includes all tools needed):http://minus.com/lbxveduAYIEiP2
By sloaxleak (twitter.com/#!/sloaxleak)
We already have a topic like this.
Also with half in spanish it's not very clear
not needed...did you get permission to repost other peeps work?
RE
DoubleYouPee said:
We already have a topic like this.
Also with half in spanish it's not very clear
Click to expand...
Click to collapse
Sorry, it was not my intention
...
ovelayer said:
not needed...did you get permission to repost other peeps work?
Click to expand...
Click to collapse
I just created a compilation of all the necessary files. The credits cited in each of them remain intact. I think in spanish is needed.
If a moderator believes that is an infraction, I wish him to tell me.
Thx.
It's in Spanish, so it may be helpful to some!
this thread has been reported for kanging other contributors' work.
closed.
STOCK LOLLIPOP ROM FOR HUAWEI Y5II-CUN L03
MEDIATEK 6735
You are not PERMITTED to share or mirror my ROM to other portals like Mega,Mediafire,ShareBiz,Dropbox, Box, etc..., (!!! without my permission !!!)
REMINDER:!!!You are not allowed to share my Rom via Videoportals like Youtube, Vimeo etc.. without my permission!!!.
Here are the following actions i took into this ROM :good:
DISCLAIMER
Your warranty is now void. I will not be responsible
for bricked android phones, dead sd cards,
or any happy ending with your device.
if you point that finger at me, i will laugh at you :v
CHANGELOG ROM ODOEX
Removed.
{ *libSwypeCore.so
*Huawei_Swype.apk
*Drive, Gmail2, Hangouts, Music, talkback, Videos, Youtube, Email. (Debloaded) :v
*Pre-loaded: music & pictures }
* Zipaling
* EXT4 Optimizing
* SQLLITE Optimizing
CHANGELOG ROM DEOEX
Removed
.{*libSwypeCore.so
*Huawei_Swype.apk
*Pre-loaded: music & pictures}
*Init. d "Support"
* Ode-oxed
* Zipaling
* Debloated
* Busybox
* EXT4 Optimizing
* SQLLITE Optimizing
* Custom Asserts
* Custom Debloat list support
* Sign zips
* AND OTHERS
TestedY5II- CUN-L03
NO WORKING FOR HUAWEI Y5 II CUN-L23,CUN-L21, CUN-L01
INSTALLATION PROCEDURE:
Thanks Beta testers
————————————— ☆ Instructions for installing a ROM ☆ —————————————
(TWRP)
1. Restart the phone in recovery mode (Power and Volume +)
2. Select Wipe option
3. Choose Advanced Wipe
4. Choose Dalvik Cache, cache, data (#opcional internal storage, system )
5. Swipe to wipe
6. Go Back and choose Install zip from SD External, select the file you downloaded in your SD and installation will begin, vibrate after installation, then give you reboot system.
wait up to 5 minutes until the cell starts with the system properly
7. Let the rom is properly seated about 10 minutes and restart again
(TWRP)
1. Reiniciar el celular en modo recovery (Encendido y Volumen +)
2. Elegir la opción Wipe
3. Elegir Advanced Wipe
4. Elegir Dalvik Cache, cache, data (#opcional internal storage, system)
5. Swipe to wipe
6. Go Back y elegir Install .zip from External SD, elegir el archivo que descargaron en su SD y la instalación comenzará, vibrara al terminar la instalacion, despues le dan reboot system.
esperen máximo 5 minutos hasta que su celular inicie con el sistema correctamente
7. Dejen que la rom se asiente correctamente unos 10 minutos y vuelvan a reiniciar
[/CENTER]
ROM ODEX :good:
DOWNLOAD:
https://www.androidfilehost.com/?fid=457095661767152943
ROM DEODEX
DOWNLOAD:
https://www.androidfilehost.com/?fid=529152257862718992
Credits/Thanks:
@SuperR. for amazing kitchen :fingers-crossed: :good:
pieroDLT, @bogdanwp @mangakame @veto64 for testing the ROM. :laugh:
HIT THANKS IF YOU LIKED IT. :laugh: :good: :fingers-crossed:
ROM OS Version: Built from stock 5.1.x Lollipop
ROM Kernel: Stock kernel
ROM Firmware Required: Stock Lollipop Android 5.1.x
Stable Release Date: 13/04/2017
gracias hermano probandolo
Thanks brother i was waiting for you , Proving him
hi guys, Did anyone test the rom?
Tried it on a Y5II CUN-L02 Philippine version. The ROM installed fine and most of the features worked except the SIM card was not detected.
finally 2 roms what i could install to a huawei CUN-L22,
unfortunately the dual-simcards do not work.
thanks
i got the sims working
this is what i did:
with twrp i installed this zip
Rom-stock.zip
https://myridia.com/downloads/huawei_cun-l22/Rom-stock.zip
but the sim card was not working,,
than i extracted the update.app from the huawai download stock rom
and flashed the system.iso via fastboot
the extractor and the original romzip you find there:
https://myridia.com/downloads/huawei_cun-l22/
Can work on cun-l22 ?
tested on cun l03
id tested on my cun l03 it doesnt work if you wipe sytem cache dalkv data an internal and you choose the deodexed one
im gonna try with the odexed one
same result with the deodexed one
ok i did tested the rom works perfectly cause my problem was a file called libmemtrack.so that i removed from the lib system so i decide to reinstall the whole package of update.app then put the twrp recovery and then delete the system folder completely so i did install the deodexed package and works smooth just one little detail the apn doesnt let me open thats the only thing that doesnt work the rest works perfectly
Hi, this rom can work with CUN-AL00?
for y6
any custom roms have to huawei y6 scc-u21?
Need help Cun-L01 sim not working and i cant find official rom for this model. Help i cant use my phone!
Can`t a flashable ril be created for Cun-L21 from official B115 Romanian rom ? Or please tell me a solution to the sim not recognized thing.
Marcii96 said:
Need help Cun-L01 sim not working and i cant find official rom for this model. Help i cant use my phone!
Click to expand...
Click to collapse
Marci , CUN-L01 firmware for you :
http://consumer.huawei.com/md/support/downloads/detail/index.htm?id=94085
bogdanwp said:
Marci , CUN-L01 firmware for you :
http://consumer.huawei.com/md/support/downloads/detail/index.htm?id=94085
Click to expand...
Click to collapse
How can i use update.app? I dont have stock recovery and cant install it..:/
Marcii96 said:
How can i use update.app? I dont have stock recovery and cant install it..:/
Click to expand...
Click to collapse
Do you have TWRP ? If yes , you use Huawei Update Extractor and extract system.img from the update.app. You connect the phone to usb and reboot to fastboot , go to adb folder on pc , copy system.img there , open a cmd and flash the system.img from there. I did the same , here a post from me :
https://forum.xda-developers.com/showpost.php?p=73799988&postcount=205
I have a CUN-L21 and i flashed the stock rom from this thread , everything was working fine except sim was not recognized , so i found a firmware compatible with my CUN-L21 and did like i told you above and now everything is working. I hope it works for you. Mind you , research around , i`m not that tech savvy. Not responsible if anything bad happens , it worked for me.
Rom Stock Emui 3.1 tested on CUN-L21 , confirmed everything working except sim not recognized. Please update original thread.
how to fix sim not recogdnized on cun l21 ?
hello friends, I have never counted on this device, sorry for answering alone, I have been busy for work and university tasks
file
hi anyone have scatter file for cun-l02 please
whats is better, odex or deodex?
Does someone have a backup file of nvram.bin, secro.bin and scatterfile of it for miraclebox? or nvram.bin and nvdata.img for sp?
I need to repair my IMEI of my redmi 9. I can't seem to find nvram, nvdata from stock firmwares.
upszboh said:
Does someone have a backup file of nvram.bin, secro.bin and scatterfile of it for miraclebox? or nvram.bin and nvdata.img for sp?
I need to repair my IMEI of my redmi 9. I can't seem to find nvram, nvdata from stock firmwares.
Click to expand...
Click to collapse
You should use sn write tool to right imei .all required file are available in stock fastboot rom...
Shas45558 said:
You should use sn write tool to right imei .all required file are available in stock fastboot rom...
Click to expand...
Click to collapse
i was use these tool but here what i get
not just that i was try flashing with erase nvram and nvdata, but still not working
here everythink what i did
this is my first time had this issue, it might be my fault use that tool so pls help
edited: 2020-09-26
btw it happening from i break my phone after experiment with twrp.
and trying to flash in spflashtool error: PMT Changed for the rom, it must be downloaded.
after that i found article says: "auto format flash without bootloader it will work"
yeah everthink was work, i flashing without troble, but "err nvram 0x10" show in wifi.
i think nvram was trobule from that.
didinfakhrudin said:
i was use these tool but here what i get
not just that i was try flashing with erase nvram and nvdata, but still not working
here everythink what i did
this is my first time had this issue, it might be my fault use that tool so pls help
edited: 2020-09-26
btw it happening from i break my phone after experiment with twrp.
and trying to flash in spflashtool error: PMT Changed for the rom, it must be downloaded.
after that i found article says: "auto format flash without bootloader it will work"
yeah everthink was work, i flashing without troble, but "err nvram 0x10" show in wifi.
i think nvram was trobule from that.
Click to expand...
Click to collapse
saya berhasil membuat 2 imei redmi 9.
1. unlock bootloader, flash rom eng!!! atau rom yang dirakit.
2. Setelah selesai menulis IMEI menggunakan Maumeta versi 10.
3. install twrp dan backup nvram dan nvdata di rom eng!!!, copy hasil backup twrp ke komputer.
4. flash format & download global rom, lalu unlock bootloader lagi, hidupkan hp sampai start menu, lalu matikan hp dan install twrp, lalu masukan hasil backup ke twrp dan restore, lalu install kernel dari strombreaker v1. 0, setelah selesai segera reboot sistem.
selamat mencoba, berhasil 1000%
----------
MOD EDIT: English Translation Below
I managed to make 2 imei redmi 9.
1. unlock bootloader, flash rom eng!!! or assembled rom.
2. After writing IMEI using Maumeta version 10.
3. install twrp and backup nvram and nvdata on rom eng!!!, copy the results of the twrp backup to the computer.
4. flash format & download global rom, then unlock the bootloader again, turn on the cellphone until the start menu, then turn off the cellphone and install twrp, then input the backup results to twrp and restore, then install the kernel from strombreaker v1. 0, when finished immediately reboot the system.
good luck, it worked 1000%
hckbkl said:
saya berhasil membuat 2 imei redmi 9.
1. unlock bootloader, flash rom eng!!! atau rom yang dirakit.
2. Setelah selesai menulis IMEI menggunakan Maumeta versi 10.
3. install twrp dan backup nvram dan nvdata di rom eng!!!, copy hasil backup twrp ke komputer.
4. flash format & download global rom, lalu unlock bootloader lagi, hidupkan hp sampai start menu, lalu matikan hp dan install twrp, lalu masukan hasil backup ke twrp dan restore, lalu install kernel dari strombreaker v1. 0, setelah selesai segera reboot sistem.
selamat mencoba, berhasil 1000%
Click to expand...
Click to collapse
How are you supposed to unlock bootloader if there's no IMEI?
Fahimscirex said:
How are you supposed to unlock bootloader if there's no IMEI?
Click to expand...
Click to collapse
1. take rom_eng
2. take md1rom/md1img rom_eng to put into global rom
3. flash using bypass mtk
4. open mauimeta just write on imei sim 2
5. login xiaomi account, use sim 2, request unlock,
then unlock the purpose of the unlock is to install twrp only
hckbkl said:
saya berhasil membuat 2 imei redmi 9.
1. unlock bootloader, flash rom eng!!! atau rom yang dirakit.
2. Setelah selesai menulis IMEI menggunakan Maumeta versi 10.
3. install twrp dan backup nvram dan nvdata di rom eng!!!, copy hasil backup twrp ke komputer.
4. flash format & download global rom, lalu unlock bootloader lagi, hidupkan hp sampai start menu, lalu matikan hp dan install twrp, lalu masukan hasil backup ke twrp dan restore, lalu install kernel dari strombreaker v1. 0, setelah selesai segera reboot sistem.
selamat mencoba, berhasil 1000%
Click to expand...
Click to collapse
can you install twrp on your rom. if so, how do you do it?
leox aratapan said:
can you install twrp on your rom. if so, how do you do it?
Click to expand...
Click to collapse
yes, unlockbootloader, i am enjoy v11.0.6.0 with kernel strombreaker, write 1&2
Terima kasih, saya berhasil mengembalikan ke 2 IMEI. Masalah muncul lagi, saya tidak bisa menelepon atau sms. Tapi panggilan masuk dan SMS masih berfungsi. Dan ada peringatan nvram ox1 di wifi hp saya. Bisakah kamu membantuku. Terima kasih sebelumnya..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
leox aratapan said:
View attachment 5372667
Click to expand...
Click to collapse
untuk nvram saya belum ketemu, saya hanya menggunakan tulis untuk imei 2 saja,,
boleh anda berbagi tutorial untuk 2 imei tanpa instal kernel, terimakasih sebelumnya.
menurut saya jika anda mampu menulis 2 imei artinya hp sudah dalam kondisi normal dan tidak ada lagi masalah
----------
MOD EDIT: English Translation Below
for nvram I haven't found it, I only use write for imei 2 only,,
can you share a tutorial for 2 imei without installing a kernel, thanks in advance.
In my opinion, if you are able to write 2 IMEI, it means that the cellphone is in normal condition and there are no more problems
O Lost my IMEI um redmi 9 using SP flash tools. If i have another readmi 9 can i restore my other phone just using NVRAM? Or neves to flash eng ROM and insert irmão with Maui meta ?
WARNING: DO NOT ATTEMPT TO USE THE BOOT.IMG ON ANY DEVICE OR FIRMWARE VERSION EXCEPT THE ONE STATED!!! IT WILL MOST LIKELY RESULT IN A SOFT BRICK/BOOTLOOP!
Hello everyone,
Today my Xiaomi Mi 11 received its MIUI 12.5 OTA update. I snagged the OTA update and extracted the boot.img from the payload.bin. Thought I would save you all some trouble since the Rom can currently not be downloaded online (c.miui, etc). If you need any of the other files, let me know. I already have 12.5.1.0 installed on mine with Magisk working.
Device: Xiaomi Mi 11 (VENUS)
MIUI: 12.5.1.0 (RKBMIXM) - Global Rom
If you need it for a different xiaomi device/variant:
Snagging the OTA
Start update in Updater.
Use a file explorer and go to the "Download" folder. There should be a folder named "downloaded_rom" go into it.
Wait for OTA to download, it will start the "updating" phase and will say "updating" instead of "downloading." Copy the zip that is in the "downloaded_rom" folder somewhere else.
Now you have the OTA rom.
** This has to be done during the updating phase since the folder is deleted, otherwise.
Extracting the boot.img
Copy rom zip to a PC (Windows)
Extract .zip
Download and Extract the Payload Dumper Tool from here: Payload Dumper Tool (make sure you have Python Installed)
Copy the Payload.Bin and Payload.Properties files to the extracted payload dumper tool folder.
Click Shift+Right-Click in the folder with Payload_Dumper.py file and the Payload files in it. Select the option to open Powershell
Type "python -m pip install protobuf" and hit enter. Let it install.
Type "python payload_dumper.py payload.bin" and hit enter.
Now you should have the boot.img file.
iamrance.asa said:
AVISO: NÃO TENTE USAR O BOOT.IMG EM QUALQUER DISPOSITIVO OU VERSÃO DE FIRMWARE, EXCETO O INDICADO !!! PROVÁVEL RESULTARÁ EM UM TIJOLO MACIO / BOOTLOOP!
Olá a todos,
Hoje meu Xiaomi Mi 11 recebeu sua atualização MIUI 12.5 OTA. Eu peguei a atualização OTA e extraí o boot.img do payload.bin. Pensei em poupar alguns problemas para vocês, já que a ROM atualmente não pode ser baixada online (c.miui, etc). Se você precisar de qualquer um dos outros arquivos, me avise. Já tenho 12.5.1.0 instalado no meu com Magisk funcionando.
Dispositivo: Xiaomi Mi 11 (VENUS)
MIUI: 12.5.1.0 (RKBMIXM) - Rom global
Click to expand...
Click to collapse
Works with version EEA?
g0mes1 said:
Works with version EEA?
Click to expand...
Click to collapse
It's not pulled from it but if you want to try, you can use "fastboot boot " then the location of where you downloaded the boot.img. If it doesn't work, then you can just restart the phone and it will boot with the oem boot.img. If it does work, then you should patch it in magisk and use the "fastboot boot" command with the patched img, then "direct install" with magisk manager. That's the safest method to use it on the EEA ROM since this is from the Global ROM.
iamrance.asa said:
WARNING: DO NOT ATTEMPT TO USE THE BOOT.IMG ON ANY DEVICE OR FIRMWARE VERSION EXCEPT THE ONE STATED!!! IT WILL MOST LIKELY RESULT IN A SOFT BRICK/BOOTLOOP!
Hello everyone,
Today my Xiaomi Mi 11 received its MIUI 12.5 OTA update. I snagged the OTA update and extracted the boot.img from the payload.bin. Thought I would save you all some trouble since the Rom can currently not be downloaded online (c.miui, etc). If you need any of the other files, let me know. I already have 12.5.1.0 installed on mine with Magisk working.
Device: Xiaomi Mi 11 (VENUS)
MIUI: 12.5.1.0 (RKBMIXM) - Global Rom
Click to expand...
Click to collapse
Hi,
Where did you find the OTA update file?
Want to update my EEA but need the boot.img to patch with Magisk after updating.
Thanks in advance!
rippledrums said:
Hi,
Where did you find the OTA update file?
Want to update my EEA but need the boot.img to patch with Magisk after updating.
Thanks in advance!
Click to expand...
Click to collapse
When you download in Updater, it is stored in /sdcard/download/downloaded_rom but it deletes itself so you'll need to grab it while it's in the updating phase.
iamrance.asa said:
WARNING: DO NOT ATTEMPT TO USE THE BOOT.IMG ON ANY DEVICE OR FIRMWARE VERSION EXCEPT THE ONE STATED!!! IT WILL MOST LIKELY RESULT IN A SOFT BRICK/BOOTLOOP!
Hello everyone,
Today my Xiaomi Mi 11 received its MIUI 12.5 OTA update. I snagged the OTA update and extracted the boot.img from the payload.bin. Thought I would save you all some trouble since the Rom can currently not be downloaded online (c.miui, etc). If you need any of the other files, let me know. I already have 12.5.1.0 installed on mine with Magisk working.
Device: Xiaomi Mi 11 (VENUS)
MIUI: 12.5.1.0 (RKBMIXM) - Global Rom
If you need it for a different xiaomi device/variant:
Snagging the OTA
Start update in Updater.
Use a file explorer and go to the "Download" folder. There should be a folder named "downloaded_rom" go into it.
Wait for OTA to download, it will start the "updating" phase and will say "updating" instead of "downloading." Copy the zip that is in the "downloaded_rom" folder somewhere else.
Now you have the OTA rom.
** This has to be done during the updating phase since the folder is deleted, otherwise.
Extracting the boot.img
Copy rom zip to a PC (Windows)
Extract .zip
Download and Extract the Payload Dumper Tool from here: Payload Dumper Tool (make sure you have Python Installed)
Copy the Payload.Bin and Payload.Properties files to the extracted payload dumper tool folder.
Click Shift+Right-Click in the folder with Payload_Dumper.py file and the Payload files in it. Select the option to open Powershell
Type "python -m pip install protobuf" and hit enter. Let it install.
Type "python payload_dumper.py payload.bin" and hit enter.
Now you should have the boot.img file.
Click to expand...
Click to collapse
No matter what I do, I just get this error :
payload_dumper\payload_dumper.py", line 86, in <module>
assert op.type in (op.REPLACE, op.REPLACE_BZ, op.REPLACE_XZ), \
AssertionError: unsupported op
Even tried doing the extraction on my phone using Termux and get the same error. I'm trying to extract boot.img from EEA 12.5.1.0.RKBEUXM OTA ROM.
Sld_Ultra said:
No matter what I do, I just get this error :
payload_dumper\payload_dumper.py", line 86, in <module>
assert op.type in (op.REPLACE, op.REPLACE_BZ, op.REPLACE_XZ), \
AssertionError: unsupported op
Even tried doing the extraction on my phone using Termux and get the same error. I'm trying to extract boot.img from EEA 12.5.1.0.RKBEUXM OTA ROM.
Click to expand...
Click to collapse
That is referring to the type of compression so it could be a number of things. If you have python3 installed (and working), then check the your payload.bin to see if it's healthy (should be around 3GB in size). I wouldn't imagine they'd use a different compression type on it.
iamrance.asa said:
That is referring to the type of compression so it could be a number of things. If you have python3 installed (and working), then check the your payload.bin to see if it's healthy (should be around 3GB in size). I wouldn't imagine they'd use a different compression type on it.
Click to expand...
Click to collapse
Around 3GB?! Okay, you meant extract the boot.img from a full OTA ROM of 12.5.1.0.RKBEUXM. I was using the OTA incremental ROM which is 656MB in size, which I copied from the download folder during it's update phase.
The zip file name was "miui-blockota-venus_eea_global-V12.0.13.0.RKBEUXM-V12.5.1.0.RKBEUXM-9a04415c08-11.0", that I was using. But the full OTA ROM I find for 12.5.1.0.RKBEUXM is stable beta, ctsprofile for safetynet won't pass so I installed the safetynet fix module in magisk. The magisk props module wouldn't work.
Sld_Ultra said:
Around 3GB?! Okay, you meant extract the boot.img from a full OTA ROM of 12.5.1.0.RKBEUXM. I was using the OTA incremental ROM which is 656MB in size, which I copied from the download folder during it's update phase.
The zip file name was "miui-blockota-venus_eea_global-V12.0.13.0.RKBEUXM-V12.5.1.0.RKBEUXM-9a04415c08-11.0", that I was using. But the full OTA ROM I find for 12.5.1.0.RKBEUXM is stable beta, ctsprofile for safetynet won't pass so I installed the safetynet fix module in magisk. The magisk props module wouldn't work.
Click to expand...
Click to collapse
Oh. This is how large the 12.5.1 update was on my phone when I updated with updater. I just pulled it from the downloaded_rom folder from the official update. The payload.bin on it is 3.03GB. I did this because the stable 12.5.1 ROM isn't available online yet.
What should I do, if my device is Poco F2 Pro?
AniTigerRu said:
What should I do, if my device is Poco F2 Pro?
Click to expand...
Click to collapse
Snagging the OTA and unloading the bin should be the same for the Poco F2 Pro. That's if you have a new OTA that isn't available in a full zip yet.
You can check here for full official ROM downloads if it is available. Just make sure you use the right variant if your bootloader isn't unlocked.
Hope some people smarter than me use this as a method of developing some Custom ROMs for our device
Hello there. Hope this helps!
FIRST OF ALL, this WILL VOID your waranty. Read the steps BEFORE doing anything.
WEWEWEWE lessgooo:
UNLOCK BOOTLOADER: It's not "easy" at all (You'll have to open your tab).
Go to device info on tab settings.
Press compilation number for several times until "you're a dev" message appears (It'll prolly ask your pattern/password to continue).
Go to dev options and enable OEM unlocking.
Shut down the tab.
Download PotatoNV sofware from here. (Credits to mashed-potatoes)
Download minimal adb and fastboot from here.
Prepare your environment:
Open your tablet
Grab a clip or a cable
Keep your cool
Follow the steps shown here.
Here you have an image of where the testpoint is.
FLASH TWRP INTO THE TAB:
Follow CAREFULLY this steps:
Shut down the tab
Connect the tab to the PC and hold vol- & pwr button.
Now it'll appear a white screen with some text. If it appears "OEM unlock" in green, then everything's fine. IF NOT, follow unlock bootloader steps again. Then try rebooting into fastboot mode again (vol- & pwr).
Download most compatible TWRP from here.
Open Minimal ADB and Fastboot and write this:
"fastboot flash recovery_ramdisk path_of_twrp.img" (Move twrp to minimal adb folder for no complications)
It should appear everything OK.
Type "fastboot reboot"
Fastly disconnect the tab from PC and hold vol+ & pwr button before Huawei logo appears (if it appears, just do a hard reboot (hold pwr button) and try again.
You're now booting into TWRP!
DOWNLOAD RESOURCES AND PREPARE YOURSELF FOR THE PARTY (This is the most important step)
Download data decrypter from attached files below the post (decryptemui8.zip)
Download ROM from here (credits: @DarkJoker360 ) DarkJoker's Post here
(OPTIONAL) Download Nikgapps from here
ONCE in TWRP, flash decrypter (decryptemui8.zip) on "install" option
Go to wipe>advanced wipe and select: dalvink/art cache, cache, data, internal storage and system.
Return to main menu and go to reboot>reboot bootloader
Connect your device to the PC (while rebooting) and wait to be into bootloader (white screen with a droid).
Open minimal adb and fastboot tools and type:
"fastboot flash system path_of_rom.img" (it MUST be decompressed to an .img file)
Wait...
Once it has finished, type: "fastboot reboot"
DONE! you have LOS18.1 now!
(optional gapps on next step)
GAPPS INSTALLATION ON MEDIAPAD T5 IT'S DIFFERENT FROM OTHER PHONES!!!!!!!
FOLLOW THIS STEPS VERY CAREFULLY!!!
Move gapps zip and add-ons to an sd card
Reboot to TWRP
Go to mount>select system. Return to main menu
Go to advanced>file manager
Go to system>system_ext>apex.
Once in apex, enter on vndk27 and vndk28 and delete them (once in vndk27/vndk28 folder, in the bottom-right corner, it'll appear a symbol with a folder with a "tick" on it. Just tap it)
LEAVE ONLY VNDK CURRENT AND VNDK26 FOLDERS (and the rest obviously. Just delete 27/28)
Return to main menu
Go to wipe>advanced wipe. Select system and tap on repair/resize partition (slide to continue)
Then go to main menu>install and install gapps as usual (sliding lol)
FOR ROOT METHOD:
Just follow the steps shown on the main post.
WORKING ROOT CAN ONLY BE DONE WITH MAGISK METHOD (installing apk for using preroot MUST perform random SystemUI reboots ; ).
---------CREDITS---------
Amazing rom: @DarkJoker360
HI6250 support group here.
JOIN T5 SUPPORT GROUP CLICKING HERE
Hey,
I've tried this, but cant get it too boot.
My device is Huawei AGS2-W09.
I've unlocked the bootloader/installed twrp, flashed the decrypter etc.
Then after i do fastboot reboot, it loads up the Lineage OS splash/loading screen, but stays on that for about 10 mins, then reboots and goes to Huawei eRecovery screen.
I've tried repeating the steps, in case it didn't flash properly.
Any ideas?
hobbitjack said:
Hey,
I've tried this, but cant get it too boot.
My device is Huawei AGS2-W09.
I've unlocked the bootloader/installed twrp, flashed the decrypter etc.
Then after i do fastboot reboot, it loads up the Lineage OS splash/loading screen, but stays on that for about 10 mins, then reboots and goes to Huawei eRecovery screen.
I've tried repeating the steps, in case it didn't flash properly.
Any ideas?
Click to expand...
Click to collapse
For those facing problems:
PM Me via telegram @Fosanz
JOIN T5 SUPPORT GROUP
I will post the solutions here on the main post as problems appear
Hello,
I have tried too, and I have had exactly the same problem. I couldn’t boot into system.
I followed all the steps as described. I have AGS2-W09 and I was on Lineage 16.0.
Now I’m back again on Lineage 16.0, waiting if there is a solution.
borja113 said:
Hello,
I have tried too, and I have had exactly the same problem. I couldn’t boot into system.
I followed all the steps as described. I have AGS2-W09 and I was on Lineage 16.0.
Now I’m back again on Lineage 16.0, waiting if there is a solution.
Click to expand...
Click to collapse
Recover system with eRecovery and follow steps again. Instructions modified. Making a factory reset is not neccesary
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
kamilmirza said:
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
Click to expand...
Click to collapse
Everything works. No face unlock as LOS16. Animations are simply beautiful, very optimized. Here you can pass safetyNet with some easy tweaks. Battery it's amazing. 1% in 6h deep sleep. While using it (6-7 hours of gaming, instagram, telegram, etc.) battery drain it's amazing. I'll share some screenshots on the telegram group
Fosanz said:
Recover system with eRecovery and follow steps again. Instructions modified. Making a factory reset is not neccesary
Click to expand...
Click to collapse
Follow steps again….Yes, but what will change if I do it again. Same tablet, same instructions. I would like to know first what was wrong. I want to avoid spending hours trying and after that restoring, until I’m sure it will work for me.
Anybody else managed to install LOS18 ? If yes please describe how you did it and from which environment you’re coming.
Does it work for AGS2-L03?
Or this ROM only work for some Variant?
I think mine only has 16GB storage and 2GB RAM.
Also the eRecovery, does it only update or can it flash the full image?
borja113 said:
Follow steps again….Yes, but what will change if I do it again. Same tablet, same instructions. I would like to know first what was wrong. I want to avoid spending hours trying and after that restoring, until I’m sure it will work for me.
Anybody else managed to install LOS18 ? If yes please describe how you did it and from which environment you’re coming.
Click to expand...
Click to collapse
Join support group duh.
theflyingsquirrel said:
Does it work for AGS2-L03?
Or this ROM only work for some Variant?
I think mine only has 16GB storage and 2GB RAM.
Also the eRecovery, does it only update or can it flash the full image?
Click to expand...
Click to collapse
Yeah it should work. Same processor but different amount of Ram. Try it out! Join t5 (Bottom of the main post) support group if you're facing problems!
Fosanz said:
Join support group duh.
Click to expand...
Click to collapse
OK, so, if anybody wants to try to install L0S18, go right away and join Telegram group of this member, beacuse the suport is not provided here (entendi bien?). What is the purpose of this forum then?
borja113 said:
OK, so, if anybody wants to try to install L0S18, go right away and join Telegram group of this member, beacuse the suport is not provided here (entendi bien?). What is the purpose of this forum then?
Click to expand...
Click to collapse
Debido a que tú pregunta no tiene nada que ver con la instalación, sino que estás preguntando por los cambios hechos, no voy a empezar ni una discusión ni una conversación por un hilo con tal de evitar overflooding de mensajes. Así que por favor y si no te molesta, te asistiré por Telegram, de manera que el problema que tú tengas pueda ser solucionado lo más rápido posible para yo poder modificar lo que pueda estar mal en el hilo principal y así no hacer que la gente que quiere instalar Lineage solo mirando el thread principal (que lo hace la gran mayoría) tenga el mismo error que tú y vuelva a preguntarme lo mismo.
Y si, hay gente que ha logrado instalar Lineage os 18.1 correctamente y gracias a que se unió al grupo pude modificar partes de la instalación que eran cruciales para otros modelos de mediapadt5.
Un saludo
Has anyone else successfully installed LO18? I tried going from LO16 to 18 and this didn't work for me. I'm gonna give it a second try when I have more time on my hands. Maybe I'll have more luck going from EMUI to LO18.
Firts of all thanks for the efford you guys spend into a working solution for our device. Second I apology for not joining Telegram group, I simply don't use it.
Device: AGS2-W09 - came from stock
Yesterday the device was successfully booting into LOS18. Might have to do with the new Huawei-Decrypt file. Before I was also getting a boot loop.
LOS is working quite well as I can tell until now.
Aditionally installed apps (sideloaded or alternative store) are freezing after a while. I suspected a dependency to gapps. The apps I tested Brave Browser, Aurora Store, VLC.
Tried to install Nikgapps (core and then basic) but it didn't work. TWRP console tells me installation was successful, but no gapps appear after the boot. I tired BiTGApps package and that was successful.
Additionally installed apps still freezing after a while.
korale said:
Firts of all thanks for the efford you guys spend into a working solution for our device. Second I apology for not joining Telegram group, I simply don't use it.
Device: AGS2-W09 - came from stock
Yesterday the device was successfully booting into LOS18. Might have to do with the new Huawei-Decrypt file. Before I was also getting a boot loop.
LOS is working quite well as I can tell until now.
Aditionally installed apps (sideloaded or alternative store) are freezing after a while. I suspected a dependency to gapps. The apps I tested Brave Browser, Aurora Store, VLC.
Tried to install Nikgapps (core and then basic) but it didn't work. TWRP console tells me installation was successful, but no gapps appear after the boot. I tired BiTGApps package and that was successful.
Additionally installed apps still freezing after a while.
Click to expand...
Click to collapse
Hey Hi!.
Glad to hear you booted! The problem was at the decrypter.
Also, a lot of people are having trouble installing NikGapps. It seems that the package is "wrong" in some way for our device. Reported the issue. Until July 2021 update, devices go very slow. Hopefully, there's a way to fix it .
adb root && adb remount /system
adb push local.prop /system/product/etc/prop/local.prop
Credits to @DarkJoker360
Extracted from HI6250 support group
local.prop file is on "attached files"
I finally had some time to try installing LineageOS 18.1 again. Works beautifully, Magisk and everything. Make you sure you go straight from EMUI to LineageOS 18.1, it doesn't work if you switch from Lineage 16 to 18.1.
In my case I needed to open to the tablet again after doing a Huawei system restore back to EMUI, it relocked my tablet, just be aware of that, that was mildly annoying.
Also make sure you use the Magisk mentioned in the thread if you want root. After installing, don't let Magisk update itself from within the app, updating the ramdisk will remove TWRP and the system will bootloop until you reflash TWRP. It will boot again normally with your stuff still intact after the TWRP reflash.
Been playing around with it for a bit, doesn't seem to have some of the annoying LineageOS 16 bugs. It has full screen navigation controls which I really wanted and was missing earlier. Android 11 (Juli 2021 security update), MicroG is working, seems responsive and smooth. Great! I am very happy with this.
Thanks and special shout out to all the people making this possible, y'all are amazing.
Just as a hint. I don't think you need to open your tablet again.
Keep the unlock code generated by PotatoNV save. In my case I relocked and unlocked the tablet several times with the unlock code without the testpont method.
hi, i just got to the part that i have to make a img file out of the rom zip file....
help pls
can i flash the other img files on the site? (the 650 mb files)
can i flash the new rom from twrp?
thx
kamilmirza said:
@Fosanz can you share how's the performance of LOS18.1 on MediaPad T5
what is working and what not?
how is the battery on LOS18.1?
my battery sucked on LOS16, hardly 3 hours
Click to expand...
Click to collapse
Fosanz said:
Hello there. Hope this helps!
FIRST OF ALL, this WILL VOID your waranty. Read the steps BEFORE doing anything.
WEWEWEWE lessgooo:
UNLOCK BOOTLOADER: It's not "easy" at all (You'll have to open your tab).
Go to device info on tab settings.
Press compilation number for several times until "you're a dev" message appears (It'll prolly ask your pattern/password to continue).
Go to dev options and enable OEM unlocking.
Shut down the tab.
Download PotatoNV sofware from here. (Credits to mashed-potatoes)
Download minimal adb and fastboot from here.
Prepare your environment:
Open your tablet
Grab a clip or a cable
Keep your cool
Follow the steps shown here.
Here you have an image of where the testpoint is.
FLASH TWRP INTO THE TAB:
Follow CAREFULLY this steps:
Shut down the tab
Connect the tab to the PC and hold vol- & pwr button.
Now it'll appear a white screen with some text. If it appears "OEM unlock" in green, then everything's fine. IF NOT, follow unlock bootloader steps again. Then try rebooting into fastboot mode again (vol- & pwr).
Download most compatible TWRP from here.
Open Minimal ADB and Fastboot and write this:
"fastboot flash recovery_ramdisk path_of_twrp.img" (Move twrp to minimal adb folder for no complications)
It should appear everything OK.
Type "fastboot reboot"
Fastly disconnect the tab from PC and hold vol+ & pwr button before Huawei logo appears (if it appears, just do a hard reboot (hold pwr button) and try again.
You're now booting into TWRP!
DOWNLOAD RESOURCES AND PREPARE YOURSELF FOR THE PARTY (This is the most important step)
Download data decrypter from attached files below the post (decryptemui8.zip)
Download ROM from here (credits: @DarkJoker360 ) DarkJoker's Post here
(OPTIONAL) Download Nikgapps from here
ONCE in TWRP, flash decrypter (decryptemui8.zip) on "install" option
Go to wipe>advanced wipe and select: dalvink/art cache, cache, data, internal storage and system.
Return to main menu and go to reboot>reboot bootloader
Connect your device to the PC (while rebooting) and wait to be into bootloader (white screen with a droid).
Open minimal adb and fastboot tools and type:
"fastboot flash system path_of_rom.img" (it MUST be decompressed to an .img file)
Wait...
Once it has finished, type: "fastboot reboot"
DONE! you have LOS18.1 now!
(optional gapps on next step)
GAPPS INSTALLATION ON MEDIAPAD T5 IT'S DIFFERENT FROM OTHER PHONES!!!!!!!
FOLLOW THIS STEPS VERY CAREFULLY!!!
Move gapps zip and add-ons to an sd card
Reboot to TWRP
Go to mount>select system. Return to main menu
Go to advanced>file manager
Go to system>system_ext>apex.
Once in apex, enter on vndk27 and vndk28 and delete them (once in vndk27/vndk28 folder, in the bottom-right corner, it'll appear a symbol with a folder with a "tick" on it. Just tap it)
LEAVE ONLY VNDK CURRENT AND VNDK26 FOLDERS (and the rest obviously. Just delete 27/28)
Return to main menu
Go to wipe>advanced wipe. Select system and tap on repair/resize partition (slide to continue)
Then go to main menu>install and install gapps as usual (sliding lol)
FOR ROOT METHOD:
Just follow the steps shown on the main post.
WORKING ROOT CAN ONLY BE DONE WITH MAGISK METHOD (installing apk for using preroot MUST perform random SystemUI reboots ; ).
---------CREDITS---------
Amazing rom: @DarkJoker360
HI6250 support group here.
JOIN T5 SUPPORT GROUP CLICKING HERE
Click to expand...
Click to collapse
Thx alot for the guide and the help in instegram.
It's working for me with my mediapad t5.
Some things that are still a bit dissfunction:
Mobile network dissconnect every 30 seconds and reconnect.
No support for sd card (can't format it in the tablet).
Thanks again,
Ilan