Related
/// JellyBeanX-kernel ///
DISCLAIMER
Me, XDA-Developers.com and anyone else doesn't take any repsonsibilty for damages on your device!
Rooting your device will void your warranty!
Don't play with settings you aren't familiar with, you could burn your device!!
Click to expand...
Click to collapse
READ THIS: READ BEFORE YOU ASK and HELP TO KEEP THIS THREAD MORE CLEAN! BUT ALSO BETTER ASK ONCE MORE BEFORE YOU MESS UP YOUR PHONE! If you find something missing in this OP/FAQ, please PM me and I will add it. Thank you!
This is a custom kernel mostly based on Motorola's 3.0.8 Hybrid Kernel which was initiated first by the STS-Dev-Team (Hashcode, Dhacker).
I created this kernel for my main goal: BATTERY LIFE! Like many other custom kernels this one also supports several performance related features like OVERCLOCKING, UNDERVOLTUNG, GPU CONTROL, CPU OPTIONS, RAM TWEAKS, etc etc... But my main goal was not to bring up a kernel which is fast as hell - I want to bring up a kernel that is fast + a long lasting battery! Many custom kernels are also very fast but they don't save battery. JBX-Kernel is supposed to push your device to great speed while being on low power settings. I hope you enjoy it!
If you want to support me and my work just leave me a beer.
You can find the FAQ at the bottom of this post!
LATEST CHANGES
FULL HD Video Recording is working now!!! See Downloads section below!
--> DETAILED CHANGELOG JBX-kernel Hybrid 4.4 <--
Kernel Guide by Placca 1.8!!
Check the FAQ section at the bottom of this post to download it! It will make many things easier for you and help you to understand the kernel and its features!
FEATURES
JBX-Kernel Hybrid
Battery Friend toggle (a battery friendly mode)
Intelli-Plug (Kernel side replacement for msm MPDecisions) by Faux123 + patches by me (no hotplugging when screen is ON)
Dynamic Hotplug: Second core will be turned off ONLY while screen is off - independent from selected governor. (Not needed when using Intelli-Plug)
Optimized OPP Table for smooth CPU scaling
Frequencies: 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300
Modifed Smartreflex driver (Custom Sensor for detecting n-Value).
Smartreflex Tuning Interface: Set min/max calibrated voltage
Overclocking using Live OC (mine runs stable at a maximum frequency of 1,498ghz!)
hwmod, uart, IRQs - cleanups from pre-kexec config to safe power
CPU: lower voltages for CORE and IVA. Give CORE the abbility to scale up to higher voltage if needed
Added IVA_NITROSB
Dynamic fsync control: FSYNC interval is dynamic depending on screen state (SCREEN OFF: synchronous, SCREEN ON: asynchronous)
HTC's Asynchronous Fsync port - read explanation below*
Dynamic page-writeback: Page writeback interval is dynamic depending on screen state.
Frandom v2
JRCU / Tiny RCU (currently JRCU in use)
Raised voltage limits for mpu a bit
Raised the temperature limits from 64c* to 74c* (degrees)
optimized CRC32 algorithm (better code generation)
RW Readahead dynamically depending on storage device (automatic detection of the best value)
zRAM support
GPU has 4 scaling steps and OC to 384mhz (Base freq: 102 mhz --> 154 mhz, 307 mhz, 384 mhz)
GPU C4 states / GPU Control (Governors, Frequencies)
Multicore Power Saving Mode Control
ARCH Dependant Power feature
Gamma Control
Front Buffer Delay Control (draw in x msecs on early suspend)
Screen/Display: Modified OMAPDSS for sharpness and lightning colors
OMAPDSS: Added variable clock rate and OPP - allows the screen to scale down power and voltage
lowmemkiller: Heavy modified for R/W Speed and efficient performance
ZCACHE, ZSMALLOC, XVMALLOC backported from 3.4, 3.7 and 3.10 (ZCACHE currently not in use)
Custom Voltage Support
IO-Schedulers: SIOPlus, Fifo, Row, VR, Noop, Deadline, CFQ, BFQ
ROW Scheduler is heavily tweaked to be the fastest scheduler ever!
CPU: More Governors
Deep Idle
ARM Topology
Many improvements in overall OMAP PM
SELinux permissive
GREAT performance!
battery life!
Support for Trickster Mod Kernel Control App (Download from Gplay)
*]Too much stuff to list here. See "Sources" below and check my Github
* HTC's Asynchronous Fsync and Dynamic Fsync:
Asynchronous fsync (called "afsync" or "async fsync") from HTC is ported into this kernel. By default it's enabled and dynamic fsync is disabled (and as well it isn't needed anymore). But just to test a little bit around to see which one of both features is the better one - for battery & performance. But currently Tricktser Mod doesn't support a toggle for afsync, so I had to find another way to use Trckster. Finally I did it like this:
The dynamic fsync toggle in Trickster Mod is now serving both functions - the dynamic fsync AND the asynchronous fsync! How? By default Dynamic Fsync is disabled, and Afsync is enabled. If you now enable Dynamic fsync using the toggle, Afsync will be automatically disabled, so both functions are not conflicting each other - and this way we have a working toggle for both of them.
CAUTION
This is a work in progress! Some of the current features are still not in final stat. If you are facing issues report back here and DON'T spam the threads of the rom you're using!
Be careful with some settings such like Voltage and Overclocking!!! If you aren't experienced with these things, dont play with 'em!
Click to expand...
Click to collapse
REQUIREMENTS
NOTE: This will NOT work on Stock(-based) Roms!!
Rooted device
Must use a Kexec Rom (CM, AOKP, AOSP)
Recovery (BMM, SS)
REMOVE any kernel modules you used before
DEACTIVATE ANY CPU tweaks, onboot settings etc otherwise your phone may not boot!
CAUTION: The kernel needs a clean setup related to CPU tweaks / Settings, etc...Keep your device as clean as possible regarding to Tweaks, CPU special settings, etc. The Kernel brings its own CPU settings and after you can boot it succesfully, you can set it like you want!
This kernel may not work on all roms! Check and report.
TO DO LIST
- Fix bugs
INSTRUCTIONS
NOTE: CLICK here for a detailled Installation Guide (about the Aroma Installer, the features to select and more)
Download zip file from below
Reboot into recovery
Flash the kernel (BMM users: DON'T use the "Flash Kernel" Option! This is a usual zip file!)
Reboot
Download Trickster Mod App from Gplay! Read the FAQ to learn about playing with kernel features!
Enjoy!
NOTE: For updates you can use the built-in OTA UpdateMe App!
DOWNLOAD
NOTE:
Only for Android 4.4!
JBX-Kernel 3.0.8 Version:
2.x == > Android 4.4
JBX-Kernel 3.0.31 Versions:
3.x == > Android 4.4
TEST BUILDs
Test builds are potential prerelease builds which need some more testing before pushing to all users.
CAUTION: Should be stable mostly! But use at your own risk though!!
---> TEST BUILDS [CF] <---
XPERIMENTAL BUILDs
These builds include features without promises to work.
CAUTION: There is no promise that these version are stable/working/whatever! Use at your own risk!!
---> XPERIMENTAL Builds [Dev-Host] <---
---> XPERIMENTAL Builds [CF] <---
Click to expand...
Click to collapse
Something went wrong?
If you think you have set wrong "on-boot-values" in Trickster Mod flash this:
TRICKSTER RESET: http://dtrailer.de/kernel/trickster_reset.zip
FAQ
CAUTION: This FAQ and the whole OP, additional informations about Governors, IO Schedulers and detailed informations about the usage of Trickster Mod and this kernel can be viewed in the awesome Kernel Guide by Placca!
Kernel Guide 1.8
PDF: http://www.mediafire.com/download/7zaddcmvtxfk9ry/JBX+Kernel+Guide_v1.8.pdf
CHM: http://www.mediafire.com/download/g3ck1bf1k3a3j38/JBX+Kernel+Guide_v1.8.chm
CLICK THE BUTTON BELOW TO OPEN THE FAQ!
Please check the following points if you don't know how to use the features of the kernel or you are facing any kind of issues.
INDEX
1. Kernel Features
1.1 Smartreflex (Turn ON/OFF, adjust min/max range)
1.2 Live OC (Realtime Overclocking)
1.3 Custom Voltage (EMIF)
1.4 GPU Overclock & GPU Governor (UPDATED)
1.5 Gamma Control
1.6 Battery Friend
1.7 Suspend Governor (CURRENTLY DISABLED)
1.8 IVA Overclock
1.9 DPLL Cascading
1.10 HDMI toggle
1.11 Intelli-Plug
2. Issues
1.1 How can I change the smartreflex minimum/maximum voltage
What is Smartreflex?
SR is compareable with an CPU governor but not for scaling frequencies but for voltages. That means SR has a fixed range of voltage (min/max) and calculates the optimal voltage for each CPU frequency. In example on light use of the CPU it scales down to lower voltage - on heavy use it can sclae to higher voltage. This is an efficient system to save power! Compared to EMIF which uses the hardcoded voltages it saves more power because it's variable. EMIF cannot vary between the values.
This interface has a hardcoded range of 830mV min to 1450mV max. Usually there is no need to adjust these values but irt can be usefull in example when using high overclocked frequencies above 1,5ghz! Usually SR cannot handle frequencies above 1,5ghz and I have hardcoded the maximum range of 1,45mV which should allow SR to handle it. In prior times the users had to turn off SR when OCing above 1,5ghz which causes the CPU to eat more power. But you can try around and report your results.
CAUTION: Don't raise the maximum SR voltage too high! It can burn your board = no phone anymore! I recommend to not use higher values than 1490mV! As already mentioned: THe default value should be enough!
ANd also: USUALLY THERE IS NO NEED TO CHANGE ANYTHING ON SR! IF YOU DON'T KNOW WHAT YOU'RE DOING, PLEASE LEAVE IT ALONE!
Ok, now let's see how to do this:
Turn ON/OFF SR
1. Open Trickster Mod
2. Head to the "Specific section"
3. Scroll down to "Smartreflex"
4. You can toggle ON/OFF SR for each component (IVA, CORE, MPU)
Usually I recommend to keep SR ON because it saves power! But in some cases when overclocking the CPU (MPU) the device could freeze - whether you OCed too much or SR couldn't handle the frequency! In this case you can try to raise the vmax value of SR a little bit (CAREFULLY!) and try again. If it sitll freezes and you're sure that you didn't OC too much, turn SR OFF at least for MPU!
Maximum Voltage
Currently there is no app which supports the feature of adjusting the SR vmax value, because I wrote this feature some days ago.
But in the next Trickster Mod version this option will be supported!
example:
# To read the current vmax value. Replace XXX with one of the following:
sc_core - for core max sr voltage
sr_iva - for iva max sr voltage
sr_mpu - for mpu max sr voltage (mpu is most related for CPU scaling)
cat /sys/kernel/debug/smartreflex/XXX/vmax
# You will get an output, e.g. for mpu = 1450000 (1450mV)
# To set a new value, do the following command (replace XXX with a value like above - BE CAREFUL! USUALLY THE DEFAULT VALUE ENOUGH AND YOU CAN LEAVE IT UNTOUCHED!)
echo XXX > /sys/kernel/debug/smartreflex/XXX/vmax
Minimum Voltage
It's easy because Trickster Mod supports it!
1. Open Trickster Mod
2. Head to the "Specific section"
3. Scroll down to "Smartreflex"
4. Below each SR component (IVA, CORE, MPU) there is displayed a value (usually 830 default) which means this is the lowest scalable voltage for this component. You can try to decrease this value for the case you want to UV a bit more - or raise it a bit for the case you think that the set range is too low and causes freezes on your device.
1.2 How do I use Live OC (Live OVerclock)?
This feature allows you to overclock the CPU in realtime. It works with a multiplier value set by the user. The default multplier value is "100", which means: No OC! If you want to raise the OC frerquency, just raise this value step by step.
FOr my device the maximum working OC value is "111" which means the maximum frequency is running at 1498mhz!
NOTE: Keep in mind that you tunr Smartreflex OFF for higher freqs than 1500mhz - or raise the maximum SR voltage range for "MPU" a little bit and test if it works.
Ok, how to use Live oC in action:
Open Trickster Mod App and swipe to the tab "Specific". There you will find something like this:
Code:
MPU OC [100]
DON'T TOUCH THE "CORE OC" SECTION, IT WILL CAUSE FREEZES!
Now slowly increase the value "100" to something higher, e.g. "105". Tap the hook in the right upper corner to confirm. To see your new set of frequencies you can now whether close and restart Trickster Mod or just use any monitoring app like Cool Tool which will show your frequencies in real time. That's it!
CAUTION: You can damage your phone forever!!!! This feature allows you to set very high frequencies (also up to 2,0ghz...) - That DOESN'T mean that your phone can run these frequencies!
If your phone freezes or crashes you have probably set too high OC - or your voltage is too low.
1.3 How do I use Custom Voltage (EMIF)?
NOTE: This only adjusts the fixed voltage! When you have Smartreflex ON it can still vary! You have to see the bigger picture: This voltage value sets the "middle point" for voltages. Smartreflex is still able to increase or decrease the voltage. When Smartreflex is OFF the CPU will stay on this voltage you set here and probably eats also more power.
How does EMIF works together with Smartreflex:
Code:
-------
| CPU |
-------
|
------------------ ------------------
|Voltage 1015 mV | ---->| SMARTREFLEX ON| = 1015mV +/- "vmax"/"vmin"
------------------ -------------------
|
--------------------
|SMARTREFLEX OFF| ----> 1015mV FIXED! No changes!
-------------------
Thi smeans if you change the voltage for a scaling step (OPP) while SR is ON, SR will adjust the voltage from this value, means: mV-Value +/- SR vmin/vmax. WHen SR is OFF it will stay on this mV as a fixed value.
How to adjust the voltage?
Well, this feature can be used with all generic apps which are supporting voltage settings. But we are prepared well, you can adjust voltages also with the "Trickster Mod App".
When you open the app, head to the tab "Specific" and below the "Live OC Section" you will find your voltage table, which looks like this:
Code:
<-->
1200 [1398]
1000 [1388]
900 [1371]
...
..
..
Now just tap the arrows in the right upper above the first voltage value and just type or tap (per direction) a value, e.g. "-25". To apply it, confirm by tapping the hook in the right upper corner of your screen. That's it, your new voltage values are now set and applied. And also mind here: If your phone freezes you porbably have set it too low.
CAUTION: NEVER SET HIGHER VOLTAGE THAN 1490mv here!!!!! Or you might damage your phone FOREVER!
This voltage is not the same like Smartreflex! But it's still voltage! Just be carefull!!
1.4 How can I use GPU OC and GPU Governor?
GPU Overclock doesn't work like Live OC! You cannot really set custom frequencies for the GPU, but you can select and set the maximum frequency from a hardcoded range!
For the GPU there are the following available frequencies:
154mhz (FIXED!)
307mhz
384mhz
416mhz
The minimum frequency of 154 is FIXED! This means you cannot change it because the GPU needs a minimum speed to run with. But the kernel allows you to select the maximum speed. This can be usefull for playing games and also for saving power . In example when not playing games you don't need the GPU to run at 416mhz! Set it to 307mhz in this case and save power.
When you open Trcikster Mod and head to the "specific section tab", you will find "GPU MAX FREQUENCY" and it's currently set maximum frequency. Tap on it to select your preferred one:
- 154 Mhz
- 307 MHz
- 384 MHz
That's it. The new setting will be your new maximum GPU frequency.
Below there's another option called "GPU Governor". Just tap on it and select your prefered one.
NOTE: If you want to track current GPU frequencies and watch governor's behavior, just switch to Trickster's "Informations" - Tab and watch the frequencies clock.
1.5 How can I use Gamma Control?
What is gamma? The gamma setting sets the color range for the screen. You can compare it to the contrast. We all know that the touchscreen eats most of the power compaerd to all other components in a smartphone! A lower brightness causes less power consumption and a lower gamma or contrast range alos helps a little bit to save power.
In this kernel you can choose from a range of "5 - 10" while "5" is very bright while "10" is very dark. The default setting is "5" BUT CAUTION: Trickster Mod will display a range of "0" to "10" and the default setting will be shown as "0". This is caused by the fact that this feature was ported from the Gnex device where you can choose from a higher range. The only sideeffect is that the values "0" - "5" won't show any difference.
How to set the gamma value?
Well, once again open Trickster Mod and swipe to the tab on the right end. Just select your preferred value by using the slider.
Alternately you can use sysfs by terminal or adb:
OMAP Gamma interface:
echo i > /sys/devices/platform/omapdss/manager0/gamma
Replace i with 0-10 of your choice.
1.6 What is "Battery Friend and how to use it?
Battery Friend is a simple toggle (ON/OFF) which sets your device into a battery friendly mode without the need to play with all settings in Trickster Mod /sysfs until you find a good setting. In fact it does the job for you.
What does it affect?
NOTE: Doesn't lock anyx frequencies anymore!
locks dynamic Fsync enabled
locks Fsync disabled
Doesn't allow any OC (Live OC will not have any effect, Core OC is not allowed in this kernel)
Increases the dirty ratio interval to 90% (starts working at this value)
Enables Dynamic Hotplug: This doesn't allow hotplugging during device is active - and it will always turn CPU1 OFF during suspend! It also prevents from conflicts when user uses a hotplug governor (which isn't a good idea though) - but hotplug governors are causing higher battery drain!
Dynamic Page-writeback always enabled
How to toggle Battery Friend:
For now the only way is via terminal, adb shell or root explorer (text editor)
For terminal and adb:
Code:
echo 1 > sys/kernel/battery_friend/battery_friend_active /* Enable */
echo 0 > sys/kernel/battery_friend/battery_friend_active /* Disable */
For Root Explorer
Open Root Explorer
Navigate to sys/kernel/battery_friend/
Open "battery_friend_active" with Text Editor
Change "0" to "1" and safe the file to enable
Change "1" to "0" and safe the file to disable
1.7 Suspend Governor Control (CURRENTLY DISABLED)
Suspend Governor Control is a kernel module written by me. You can use it to set your preferred Screen-Off-governor.
For now it's only supported by sysfs (Trickster Mod will support all my current and upcoming features as soon as it gets updated with its new UI mode!
How to set suspend governor
Open a terminal or use adb shell
Code:
su
echo "x" > /sys/kernel/suspend_gov/suspend_gov
Replace x with one of these values:
0 = Ondemand
1 = Ktoonservative
2 = Conservative
3 = OndemandX
NOTE: No matter what governor you use for suspend mode, if Battery Friend is enabled the second core will be turned off during suspend!
1.8 IVA Overclock
What is IVA OC?
IVA OPPs are controlling the CPU load for sound events. It could be useful (in some cases) when you get sound related laggs. Just set the maximum frequency to highspeed. This will allow more CPU power for sound events but also will cause higher battery consumption.
How to use IVA OC?
If you want to check the current IVA frequency. Just type in Terminal or ADB:
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/iva_clock
You will get an output like this:
Code:
132 Mhz
2. You can whether enable IVA highspeed: 130 - 430 Mhz ["1"] or enable IVA normal speed: 130 - 332 Mhz ["0"]
320 Mhz max: echo "0" > sys/devices/system/cpu/cpu0/cpufreq/iva_freq_oc
430 Mhz max: echo "1" > sys/devices/system/cpu/cpu0/cpufreq/iva_freq_oc
1.9 DPLL Cascading
DPLL: Davis–Putnam–Logemann–Loveland (DPLL) algorithm
To get more info about this please see wiki
But to sum it up shortly: It helps to use/stream media (music) in a low power mode.
NOTE: DPLL Cascading will be available to be switched easily via Trickster Mod App soon!
How to switch DPLL?
DPLL is ENABLED by default!
Open Trickster Mod -> Speicific Tab --> DPLL (soon)
sysfs:
Turn off:
Code:
echo 0 > /sys/kernel/dpll/dpll_active
Turn on:
Code:
echo 1 > /sys/kernel/dpll/dpll_active
1.10 HDMI toggle
Some users are facing a RAZR-sepcific problem: HDMI cable is detected, even though there is no cable plugged!
Therefor I included a toggle to switch HDMI wether ON or OFF. Additinally there's an init.d script included within the AROMA Installer you can select during the installation of JBX-Kernel.
To enable/disable HDMI on-the-fy:
sysfs:
Turn off:
Code:
echo 0 > /sys/kernel/hdmi/hdmi_active
Turn on:
Code:
echo 1 > /sys/kernel/hdmi/hdmi_active
1.11 Intelli-Plug
For intelli-plug hotplugging is now only allowed when the device enters sleep.
To enable hotplugging universally just change the value of the following entry whether to 1 (on) or 0 (off):
Code:
sys/module/intelli-plug/parameters/int_hotplug
2. If anyone has the following issues:
Issue
Media Process FC
No SD-Card in File Explorer
My CPU Settings (frequencies, etc) won't be saved (it sets itself back to Kernel default after screen off)
My phone freezes/reboots always when I try to set options in Trickster Mod
The device is lagging very hard
Solution
Media FC: Open App settings, head to "Download Manager" and "Media Storage" and hit the "delete data" button. Reboot. Now it shouldn't give any FCs anymore and after a little bit of waiting it will find all Media (Pictures, Videos, etc..)
No SD-Card: Reboot into recovery, go to "Mounts & Storage", tick "mount int" or "mount ext".
USB: Make sure the screen is ON while plugging the cable in.
CPU Settings: This is a bug which cannot be solved at the moment. Temporary solution: In Trickster Mod just activate the "Frequency Lock" and your settings will persist.
Trickster Mod:: Open App settings, Trickster Mod and select "uninstal updates". Now it should work.
Crashes, Freezes, lagging, something doesn't work, etc
There are too many reasons which could cause crashes! So here is a checklist for you to look for. Check each point and try the following workaround:
- Your rom has CPU tweaks (e.g. Kernel modules, init.d folder, etc)
- You have set custom CPU settings (e.g. custom frequencies with apps like No-Frills CPU Control, Set-CPU, Antutu, etc...)
- You have undervolted too low
- You have overclocked too high
- You have applied higher "Core OC" value in Trickster Mod App
- You are running any other kernel tweaks which are regarding to the CPU and/or performance (e.g. Kernel modules by Whirleyes eventually set by init.d, etc..)
- After setting some settings (e.g. in Trickster Mod) your device doesn't boot anymore
- adb doesn't work / shows only "device offline"
- You are facing hard lagging
If any point here matches your setting, please revert from it:
- Remove any CPU init.d script from /System/etc/init.d
- Uninstall any CPU controling app (e.g. Set-CPU, No-Frills, etc..)
- Remove all extra kernel modules from system/lib/modules (e.g. cpu_control.ko, cpufreq_smartass2.ko, etc..)
- Unset any custom settings from any other kernel / CPU - tweaking app which is NOT Trickster Mod
- Maybe your governor causes issues. Hotplug is know for bugs at the moment...I'm going to fix it..
- NEVER set your CPU Settings (e.g. in Trickster Mod App) on boot!!!! - before you aren't sure that your settings are safe!!!
- You may flash the kernel again after reverting related settings
- to make adb work / show device online, download latest SDK platform-tools and confirm access on device (4.2 security feature of Android)
- Don't use any task killers, memory killers, seeder apps! They may conflict with the kernel/Rom settings.
If none of these suggestions work for you your rom may be incompatible. Please report it here that I can add the rom to the list of imcompatible roms
If you have any issue, please read this:
First check:
- is it really a kernel issue?
- did I see this bug with the roms original kernel?
- what are the people in the rom thread saying?
- what are the people in the kernel thread saying?
- can I find this issue on a bug list?
- how about my settings? Is it my fault it crashed?
- can I find something useful in the kernel FAQ?
- Is it maybe a well known issue and can be solved
withing seconds? Just like wifical.sh?
- Where to repeat that issue? Rom or kernel?
I know it's sometimes difficult to track the issues, and we can't know for sure if it's caused by the rom or by the kernel, but if you try at least to get some information you might find an answer sometimes. If you are able to understand logs, you may report whatever you find.
All this helps to keep the threads more clear. Thank you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DONATE
If you like my work and want to support me, I'd enjoy a little beer or coffee. You can find my beer mug below my username
SOURCE
JBX-Kernel 4.4
CREDITS
Shurribbk - Co-Development
Kholk & [mbm] - Kexec inital Release
Hashcode & Dhacker - Making Kexec stable and initiating compatible kernels
Motorola - 3.0.8 Kernel Source
Surdu_Petru - Sharing Knowledge and helping with problems
nithubhaskar - Hints and answering my questions
Ezekeel, Imoseyon - Custom Voltage, Live OC, Temp Control, Gamma Control Source Code
faux123 - Some features, like Intelli-Plug, Intellidemand, Intelliactive
bigeyes0x0 - Trickster Mod App
Team Trickster - Great support and adding new features from my suggestions
Placca - Awesome kernel guide
RandomPooka - for special testing and support
- reserved -
Hey guys, welocme to JBX-Kernel for Targa! This is the first initial release and needs to be tested! Please give me some feedback if it boots and how it works for you. It comes with built-in OTA Updater and many extra stuff. Just check it out.
Keep in mind that this release will only work on 4.4 builds! Currently I don't have the time for others. Also you should use a newer build with Full HD Cam support! When using this kernel with older 4.4 builds your camera won't work.
Oh cool, i happy Someone help you with targa kernel ?
Maksim_ka said:
Oh cool, i happy Someone help you with targa kernel ?
Click to expand...
Click to collapse
Nope.. But it doesn't matter. Currently I have a problem with paying my server, and as long as I am able to build I wanted to release the Targa Kernel. The only difference seems to be in the CMD-line (Targa doesn't have a utags partition), so I just had to switch this line and build it with CM11 Targa sources to get the right ramdisk and modules. The whole source is the same like RAZR kernel.
I test it, and dont see weighty differences with RAZR kernel, have same bugs, display backlights don't turn on sometimes. I think you can talk with Hush about it, he can help.
Maksim_ka said:
I test it, and dont see weighty differences with RAZR kernel, have same bugs, display backlights don't turn on sometimes. I think you can talk with Hush about it, he can help.
Click to expand...
Click to collapse
You mean Hashcode? I am in static contact with him. But thx
What do you mean with "backlight doesn't turn on sometimes" ? I don't see this problem on RAZR... But sometimes you need to be a little patient when you want to wake it up. That's because of things like "DEEP IDLE" and others which keep the device in "deeper" sleep mode. It can take 1 or 2 seconds until you will see the lights - but it will turn on for sure. Maybe you're talking about something else? What bugs else exactly?
dtrail1 said:
You mean Hashcode? I am in static contact with him. But thx
What do you mean with "backlight doesn't turn on sometimes" ? I don't see this problem on RAZR... But sometimes you need to be a little patient when you want to wake it up. That's because of things like "DEEP IDLE" and others which keep the device in "deeper" sleep mode. It can take 1 or 2 seconds until you will see the lights - but it will turn on for sure. Maybe you're talking about something else? What bugs else exactly?
Click to expand...
Click to collapse
Yep, i mean Hashcode.
It will happened if use proximity sensor when calling, and sometimes when wake up phone. Backlight don't turn on generally, help only reboot. And it don't happened if change frequency to 300-1xxx. I think if you change minimal frequency to 300mhz it gone.
Maksim_ka said:
Yep, i mean Hashcode.
It will happened if use proximity sensor when calling, and sometimes when wake up phone. Backlight don't turn on generally, help only reboot. And it don't happened if change frequency to 300-1xxx. I think if you change minimal frequency to 300mhz it gone.
Click to expand...
Click to collapse
Well that's not an issue, but a well known phenomen. Some devices cannot handle 100 MHz (depends on silicon, each one is different). The min frequency is 300 by default, and the battery friend min frequency is 200 by default. Just check your settings in trickster mod.
Gesendet von meinem XT910 mit Tapatalk 4
I'm able to boot the kernel but cannot get radio. Any ideas?
Sent from my XT875 using Tapatalk
BZguy06 said:
I'm able to boot the kernel but cannot get radio. Any ideas?
Sent from my XT875 using Tapatalk
Click to expand...
Click to collapse
Not yet. I need more informations from other users. Any feedback here????
Just try the today's OTA (soon). I forgot to update device tree sources in yesterday's builds.
Because I had a weird drain myself on yesterday's RAZR kernel (not very much, but noticable)
EDIT: I got a workaround for the RADIO issue - if it's actually an issue Wait for the OTA.
I was only able to get radio working on your 1-08 build of the kernel for rzr. Ever since then I haven't been able to get it to come up.
Edit: I went ahead and installed your 1-21 update and its better. It eventually connects to LTE but only holds it for 30 secs and then drops with no radio. Thanks for the help in advance.
Sent from my XT875 using Tapatalk
BZguy06 said:
I was only able to get radio working on your 1-08 build of the kernel for rzr. Ever since then I haven't been able to get it to come up.
Edit: I went ahead and installed your 1-21 update and its better. It eventually connects to LTE but only holds it for 30 secs and then drops with no radio. Thanks for the help in advance.
Sent from my XT875 using Tapatalk
Click to expand...
Click to collapse
Please download the latest build from same links again (any mirror, I overwrote it). It should have fixed radio now. But you have to replace your build.prop with that one from your rom or open it and remove all additions made by JBX. The easiest way is to flash the rom again, then flash jbx.
I went ahead and redownloaded and reinstalled and I'm still getting the same thing. Attached is my "phone info" screen. And under "select preferred network" my only option is unknown
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my XT875 using Tapatalk
Just flashed latest 1/21 JBX with cm 1/20. Have lte. Haven't played with settings yet. Need to read the faq first. Thanks void time buddy.
Sent from my XT875 using Tapatalk 2
BZguy06 said:
I went ahead and redownloaded and reinstalled and I'm still getting the same thing. Attached is my "phone info" screen. And under "select preferred network" my only option is unknownView attachment 2530635
Sent from my XT875 using Tapatalk
Click to expand...
Click to collapse
So, have you reset your build.prop before as I said above?
Btw: just open it in a text editor (I.e. With root Explorer), scroll down until you see "dtrail - build.prop additions". Delete everything below that line. Now reboot and flash jbx (after downloaded again).
Gesendet von meinem XT910 mit Tapatalk 4
dtrail1 said:
So, have you reset your build.prop before as I said above?
Btw: just open it in a text editor (I.e. With root Explorer), scroll down until you see "dtrail - build.prop additions". Delete everything below that line. Now reboot and flash jbx (after downloaded again).
Gesendet von meinem XT910 mit Tapatalk 4
Click to expand...
Click to collapse
Yes. I went ahead and wiped system and data, installed cm11 1-20, and then installed the 1-21JBX targa kernel
Sent from my XT875 using Tapatalk
BZguy06 said:
Yes. I went ahead and wiped system and data, installed cm11 1-20, and then installed the 1-21JBX targa kernel
Sent from my XT875 using Tapatalk
Click to expand...
Click to collapse
Just flash the latest jb radio and don't change band in settings.
P.S. targa don't have BMM
Maksim_ka said:
Just flash the latest jb radio and don't change band in settings.
P.S. targa don't have BMM
Click to expand...
Click to collapse
I have the latest JB radio (CDMA_N_05.22.00R LTEDC_U_09.1D.00). My radio works fine using the stock CM11 kernel. I really wanna try out dtrails' work.
There are already different custom kernels getting released for Xiaomi Mi 3W. And "Kernel Adiutor" is always being suggested app to manage this customizabilities, but not all users (like me ) is too technical to understand things we can see in this app. I hope someone could explain like what would happen if you this, and do that. If you increase this, or lessen that. Or if youre that kind of user then it would be better if you do this or that.
That would be a great help if someone would start a thread like it, then where other users can also share how they setup their kernel settings, etc.
TAKE THESE:
[Kernel Settings]
Kernel: Stuxnet+ Alpha X
App used: Kernel Adiutor
1-CPU
CPU maximum frequency- 1267 MHz
CPU governer- Interective or OnDemand
Multicore powersaving- Enable
Explaination: This will make your device CPU to use limited frequency as you don't need full power in normal usage, it's like Balanced mode of MIUI.
2-CPU Voltage
Global Offset- (-75v) or (-50v)
Explaination: It limits the power consumed by each core upto 883 MHz, don't go beyond (-75v) it's harmfull for CPU.
3-GPU
GPU maximum frequency- 462 MHz
Explaination: Same as CPU.
4-Low Memory Killer
Select 'Medium'.
Explaination: Frequent RAM cleaning affect battery life, as once FREE RAM is below the level, it will auto clean RAM & thing process continues, as those apps will run again & so. Also this will helps you to make your apps on background for a long time.
Note 1: Make sure you check 'Apply on boot'. Otherwise your settings will set to default on each boot.
Note 2: You can use 'Greenify' to hibernate apps.
Note 3: Visibilty of options in Kernel Adiutor app depends upon the features of a kernel, if one kernel doesn't have that feature, it wont be show in this app.
Note 4: If you don't know a thing about kernel then please don't try this on your device. First search on Google, educate yourself & try this.
Enjoy.
[AKT] Advanced Kernel Tweaks v1.6 FINAL | Insane Battery & Performance(SD820/1|OP3/T)
IMPORTANT ANNOUNCEMENT #2REALLY IMPORTANT ANNOUNCEMENT:
Please read it!
We ( @patalao and me) have decided to create a new thread since the @op from the thread we were using seems to be inactive, so doing this will give us more freedom for editing the main post and providing you guys with more information.
I also need to thanks all the awesome people that have made this possible, therefore thanks to @soniCron and @Alcolawl for being the creators of the original guide and all the fantastic tweaks that you have made.
Thanks to @flar2 for his great app (EXKM) and his kernel and to @patalao for his superb tweaks and all the help he has provided me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All that you are about to read is based on THIS THREAD so go there and thanks @soniCron for it.
I'll go ahead and copy and paste some of the firsts paragraphs so those who don't know what this all is about can understand a bit.
I'm about to tell you how to get buttery smooth, lag-free performance with insanely good battery life, using an old school governor featured in practically every kernel... This tweak is applicable to every phone with any ROM or kernel--stock or custom--that provides the Interactive Governor.
Yeah, yeah... everyone promises good battery with great performance, but who actually delivers? Maybe it isn't as smooth as you want, or maybe it requires something your kernel or ROM don't support. Or maybe the battery life promises just aren't what you expected. There's always some awful compromise. Not here!
This isn't a guide to get 36 hour battery life... provided you never use your phone. That's deep sleep optimization, which is lovely and all, but what good is the phone if you can never use it?! And with the new Marshmallow Doze feature, this strategy is becoming a thing of the past. What I'm talking about is 7-14 hour screen on, actual hands-on usage times! Without compromising anything, you can get 7-8 hour screen on usage with regular, no-compromise usage habits: daytime visible screen brightness, both radios on, sync on, network location on, all the regular usage features, the whole kit and kaboodle... all smooth as a baby's butt and snappy as a Slim Jim! (Up to 14+ hours if you can stand minimum brightness and WiFi-only with a custom ROM and other stuff turned off! And this is with stock voltages and full frequency range--you'll likely get even more if you choose to optimize those as well!)
However, it should be noted that this does not apply to gaming, heavy camera use, etc. Anything that is an automatic battery killer in and of itself. There's nothing that can be done about anything that forces the phone to utilize its maximum resources all the time. But you should know that by now. Further, this guide is about optimizing the CPU as much as possible. It does not cover things like eliminating wakelocks so your phone sleeps well, removing unnecessary and battery draining stock apps, keeping your screen brightness down*, and all that stuff that's been covered in other posts ad infinitum. Those optimizations are up to you.
If you really want to know the principles of this tweaks, please go to this thread since there everything is really well explained and I know you guys just want to apply the tweak and forget about everything behind it, so just keep scrolling!
Voltages and Frequencies:
So recently I have been investigating about the Voltages of our device (since that is a really useful information to know) before that we only have the Nominal frequencies (If you don't know what I am talking about go ahead and read @soniCron thread because I won't explain it) we could develop some tweaks with that, but we were pretty much making blind shots, guessing and hoping that all will be right. Well, now that we have all this information we can optimize our tweaks even more so expect new updates and rework for the current tweaks and of course new ones.
I have made a little spreadsheet with the Nominal and Efficient frequencies for you guys, so you can take a look and maybe modify our tweaks to your needs, since, all of them have been tested by @patalao, our tester and me, which involves that are tested without usage and not yours.
No much to say about frequencies so we move right away to the voltages
We have more to talk about this, as you can see OverClocking have NO down points since it will consume the same voltage as the maximum stock clock speed and it will give use more performance. UPDATE: It's true that the voltage it's the same, but there is some downpoint which are explained in this posts. Here and here Thanks to @bedalus for pointing itn out!
Notice that the voltages on CM ROMs are higher that on OOS and that the values were shown there are from OOS. We are already working on a flashable zip or script for modifying those values since cannot be modified anyway else.
On the Snapdragon 820 (Our chipset) things have changed a lot from the previous chipsets like the 808 (Nexus 5X) and 810 (Nexus 6P). Now we are back to the Quad-Core, which is good, more cores= more battery consumption but we continue with the Little.BIG set up, where we have a Little Cluster (really efficient and fast) and a Big Cluster (slow but good for heavy loads). On previous chipsets, the Little kernel was really good on low-mid clock speeds and the Big cluster was really good on high frequencies and bad on low. Well, this is still true, but not we don't have such difference than before. Our Little cluster is going to be "the main thing" as it was before, but now the Big cluster has a really low consumption on lower frequencies so can be really good for sustained loads which only demand low~mid clock speeds as well it will be used as a quick burst for help the Little cluster to not reach High freq here it's not that efficient anymore.
How this affect your device (ROM/KERNEL)
You might NOT get the same results as me or other, it will depend mainly on your usage, secondly on the kernel and finally on the ROM that you currently using.
Not all the tweaks work the same way for certain kernel, what I mean with this is that the battery life/performance might be better running X kernel with X tweak, but the same tweak applied to another kernel might not be that good at all
Wait what? What you want to tell me is that some kernel is better than other, right?
Yes and No, Some kernel is better than other but also, some kernel perform better with certain tweaks as can be seen in the following screenshots (This test have been performed using AnTuTu tester with a clean install of last RR + the Kernel, nothing else. I know is a benchmark and the perfect thing whole be a real life test but that takes days, so If somebody wants to do it, I'll post the results)
Disclaimer:: This is just a profile (tweaks) for the interactive governor. If you experience any unexpected fc, reboots, massive stuttering/lagging, etc, this profile isn't most likely not responsible for that.
What About Touchboost?
Since I've noticed that a lot of people was asking about Thouchboost, I decided to add this little explanation from @soniCron
" Touchboost is a nifty feature in a lot of kernels (including stock on Nexus 5X) that jumps up the frequency so that you experience minimal lag. However, with all the above settings, touchboost is usually detrimental to the efficiency of the device!
We generally want to keep the CPU on the lowest possible frequency as much as possible, and touchboost interferes with that. Further, because we've set up the maximal and minimal efficient clock rates, as well as burst processing from the 2nd CPU core, we don't need touchboost!
If your kernel allows you to shut it off, try to do so and see if the responsiveness of your device is acceptable. On the OP3 (and pretty much all the devices), touchboost adds no perceptual performance gain and only hurts efficiency and battery life. If your kernel doesn't allow you to turn off touchboost, try another one.
Your battery life will thank you! "
With all that been said, you shouldn't confuse Touchboost with CPU Boost and more specifically Input boost. Both are used to boost the clock speed of our device whenever we touch the touchscreen, so we don't suffer any lags.
The difference is that Input boost can be configured and Touchboost cannot, making it a really inefficient.
MY DEVICE LAGS!!! WHY?!?!
First of all, it's a "normal" thing, as I have stated before, all these tweaks have been done for fit my usage or certain usage which is most likely not the same as yours. Because this, when the are put on a certain scenario the might stutter or lag just a bit (If you are experimenting huge lags, you have done something wrong)
And yes, this can be fixed. We have a couple of ways of fixing it:
First of all, Check If the tweaks have been applied correctly
Our first one is modifying the Input boost (not touchboost) most of our tweaks have an already established Input boost clock speeds and time, you can incise does too a bit. For example, we have 960(Mhz) for all the CPU at 40ms you could bump it up to ~1036(Mhz) and 42ms, don't modify too much this values since it will potentially increase your battery drain.
Our second tool for fixing lags is min_sample_time , my recommendation is to increase the value by 5000 each time till you no longer suffer any stutter or lag.
Try another tweak, for example;
If you are using Project X.A.N.A Battery, try using Balanced option...
Still having lag?
Get rid of unnecessary (background-)apps
Try a different IO-Scheduler
Try another profile
My phone still uses too much battery
First of all, Check If the tweaks have been applied correctly
Make sure that you have disabled touchboost.
Set brightness to a lower level.
Use a dark / black theme
Don't play games all day
Try other tweak, for example;
If you are using Project Zhana Balanced, try using Battery option...
JOIN OUR SLACK CHANNEL FOR TESTING BETA TWEAKS
VOTE FOR YOUR FAVORITE PROFILE
I'll keep this post updated with new information, so make sure to subscribe to it.:good:
The Profiles:
=================================================================================================
Introducing Advanced Kernel Tweaks [A·K·T] | All-in-one Project
All the profiles will be featured there, some make sure to check it out!
Over here
=================================================================================================
Project Zhana & X.A.N.A v4.2: (Everybody should try it!!)
Go to this post for the full lenght explanation.
This tweak has all the new discovery voltages and some other new techniques, giving us great battery life without losing performance
The battery could be even better than FairPark *14 h SOT*
GhostPepper:
Uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life
Really well-defined clock speed escalation for a good battery and performance.
FairPark:
There have been a lot of controversy about this tweak lately. So after you complain, this will NOT work for all of you guys.
For me, it works perfectly and it accomplished all that I'm going to state, but maybe you guys will experiment lags.
This tweak is not for everyone.
Probably the most battery efficient tweak ever created, fantastic battery with extremely smooth performance even playing games as Clash Royale or Pok?mon GO.
You can easily get 10 hours SOT or even more (If you don't play any games) just texting, browsing and so on could give you even 12 hours SOT.
HawkPepper:
As you might notice by the name is the union of the 2 tweaks above, GhostPepper for the Big cluster and HawkTail for the Little cluster, as GhoostPepper is highly optimized for the Big cluster and HawkTail for the Little.
Performance wise should be as good as GhostPepper but in terms of battery should be considerably better.
EOL Profiles:
You can still use them, but I won't give further support for them
HawkTail:
An advanced, modern profile that is both battery efficient and highly performant
It should be as battery efficient as GhostPepper but giving that extra performance for "high-end" games, as that was the only complaint on GhostPepper
Ketrel:
Really battery efficient tweak but only for light usage, when comes to playing games and some heavy multitasking the battery drain will increase exponentially
DOWNLOADS:
~ [AKT] Profiles ~
Old profiles:
Project Zhana & X.A.N.A
GhostPepper
HawkTail
HawkPepper
FairPark
Kestrel
Changelog:
Code:
27/10/16: Updated all the profiles. Applying the new discoveries about voltages and so on.
02/11/16: Adding Project Zhana v3.0
15/11/16: Adding Project X.A.N.A v3.1 | Updating to Project Zhana to version 3.1
10/12/16: Project Zhana & X.A.N.A v3.3
02/01/17: [A·K·T] + Project Zhana & X.A.N.A v4.0 + EOL Profiles
22/01/17: [A·K·T] v1.2 + Project Zhana & X.A.N.A v4.2
FAQs:
Does this tweaks works with X ROM / X Kernel; OB10, Custom ROM, OOS4.0...??
YES, YES, YES. All the tweaks featured her works with ALL the available Kernels and ALL available ROMs for the OP3. So yes OBs(9,10,11....), yes custom ROMs, yes OOS 4.0
Will this work on my device?
[*]These tweaks are intended for the One Plus 3, although it should work on any device which features the Snapdragon 820 ( Moto Z, Xperia XZ, S6 ...)
HTC 10 Here is why and Here is the HTC10 Thread
Support for the OP3T and other Snapdragon 821 devices will come soon! Read more about it here.
My device Lags/Uses to much Battery/Is not longer smooth/It's really slow!! What do I do??
[*]Everything it's explained on the OP. I quote the part where that's explained
Asiier said:
MY DEVICE LAGS!!! WHY?!?!
First of all, it's a "normal" thing, as I have stated before, all these tweaks have been done for fit my usage or certain usage which is most likely not the same as yours. Because this, when the are put on a certain scenario the might stutter or lag just a bit (If you are experimenting huge lags, you have done something wrong)
And yes, this can be fixed. We have a couple of ways of fixing it:
First of all, Check If the tweaks have been applied correctly
Our first one is modifying the Input boost (not touchboost) most of our tweaks have an already established Input boost clock speeds and time, you can incise does too a bit. For example, we have 960(Mhz) for all the CPU at 40ms you could bump it up to ~1036(Mhz) and 42ms, don't modify too much this values since it will potentially increase your battery drain.
Our second tool for fixing lags is min_sample_time , my recommendation is to increase the value by 5000 each time till you no longer suffer any stutter or lag.
Try another tweak, for example;
If you are using Project X.A.N.A Battery, try using Balanced option...
Still having lag?
Get rid of unnecessary (background-)apps
Try a different IO-Scheduler
Try another profile
My phone still uses too much battery
First of all, Check If the tweaks have been applied correctly
Make sure that you have disabled touchboost.
Set brightness to a lower level.
Use a dark / black theme
Don't play games all day
Try other tweak, for example;
If you are using Project Zhana Balanced, try using Battery option...
Click to expand...
Click to collapse
Do I have to be rooted?
[*]Yes. See the fourth question and learn more about your device before trying to change things like governor settings!
How do I apply this tweaks?
Go to this post and scroll down till you see the instructions
In case you guys still want to use the old method:
Keep scrolling to the third post, all that you need is there
You can also check this video, as a picture is worth a thousand words - but a video, a million!
My settings don't show up after I reboot! What am I doing wrong??
If you are using [A·K·T] head to this post and scroll to the FAQs over there
If you are using EX Kernel Manager, tap the power icon to the right of the setting after you set it. If you are using a different kernel manager, check with that developer to see how it's implemented. Also, give the kernel manager a few minutes after the device boots. The settings aren't applied immediately, so check back after 3 minutes and you should see the correct values.
Why is one of my CPUs not letting me change a setting or set a certain frequency?
The device may be thermally throttling and had turned off that CPU or limited it. Turn off your device and let it cool for 5 minutes, then try again. (Keep it unplugged and make sure you don't have any apps running that might be trying to use a lot of CPU while the device is off.)
These settings don't work/I'm not getting great screen on time!
You probably haven't disabled touch boost. YOU MUST DISABLE TOUCHBOOST, OR THIS WON'T SAVE YOU JACK SQUAT!!
And keep in mind these tweaks have been tested on certain scenario that is not the same as yours
My kernel editor won't let me set [whatever]Mhz for a value you showed!
Either you have done something wrong, or you're using a kernel/device combo that isn't ElementalX on OP3, for which this guide was written. Follow the instructions in the first post to determine the appropriate settings for your own device!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Community made Profiles:
Here will feature all the profiles that haven't been made by @patalao, @Mostafa Wael or myself
"Nameless" by @Senthil360
All the information and download link in his post.
LINK TO THE POST
Ok then.
First, thanks to @Asiier for making this thread with a more detailed explanation about the profiles, specially for our SD820.
As @Asiier said the profiles may not work the same for everyone because each one of us uses the phone different, so please take that in mind before filling the thread with questions why it works for Y but not for X.
HOW DID I START
I`ve started by releasing the Fusion Beta profile on Ex Kernel Manager thanks to @flar2.
After seeing almost all profiles from Nexus 5X and Nexus 6P threads i released the first version.
It was a fusion(that's why the name Fusion) of several profiles into one, but using the SD820 frequencies for our device.
After all this time and working alongside with great devs like @Asiier, @Mostafa Wael, @Senthil360 and many other users on our Slack channel i've improved my profiles to the point of releasing 2 new ones called FusionB and FusionP.
This time i've worked on them not just for me but for the entire community of our OP3, taking in mind tests maid by users on Slack channel (our private channel for development of profiles and much more).
Profiles
FusionB
This is a balanced profile.
Working alongside with testers and evolving from previous works i've came across with FusionB, a profile intended to be used out of the box with your phone.
You can expect a smooth experience without compromising battery to much.
This is based on the load percentage of the cpu.
Better than stock values, this profile should use almost all frequencies from little cluster(scale up one by one) and use the big cluster to more heavy duties till 1900 frequency jumping to the highest one just when needed.
FusionP
Based on FusionB this profile brings a more "agressive" way to scale frequencies.
It will scale frequencies sooner(regarding load values from cpu) and will use more the big cluster to provide more performance doing the tasks on hands.
Battery should not take a big hit but using heavy demanding tasks you can expect a higher drain.
Note:This aren't the normal profiles used some time ago.
This are beyond governor settings and go up till HMP values.
This will be provided as a single script on AKT script together with all the profiles from @Asiier, @Mostafa Wael and @Senthil360.
Older versions are still available below on hided content but won't be updated(at least some time soon).
Releases:
FusionB and FusionP ( 02 / 01 / 2017 )
Changelog:
New year,new start.
This will be first release.
Next updates will have changelogs accordling.
Download Section
AKT
Want to know what AKT means?
ALL IN ONE PROJECt
Installation:
#Download the tweak
#Enter into Recovery and flash the tweak
#Boot to system
#Open your terminal app and introduce:
#Code:
su
AKT
#Select the section you want ( Battery/Balanced/Performance)
#Select the profile you prefer
#Done!
OLD VERSIONS:
This are the old one's and will still be available on my AFH but won't be updated.
There are 3 categories of profiles.(maybe more will come)
Thunder
This was made thinking only on a very fluid experience
It is set for speed, not battery.
It`s a performance profile and intended more for 3D Gaming and for those apps that needs more "power" to have a fluid experience.
Fusion
Set for a balanced between performance and battery this one should be what most of users want.
It should give you more or less the same performance as stock but with an improvement on battery.
This is what you should expect more or less for the new Fusion(depending on many factors this could be or not achived by you):
Icecold
Set for extreme battery saving this one should suit those wich use the device for low end tasks.
This is an underclocked profile and because of that it isn't suitable for all.
Download Section
All said, you can get the profiles here:
Fusion
Thunder
Icecold
How to use a profile with Ex Kernel Manager App
How to use a profile?
1-You need Ex Kernel Manager App
2-Download the desired profile and rename it removing ". txt"
3-Move the profile to sdcard/ElementalX/gov_profiles.
4-Before using any profile please uncheck all "set on boot" in Ex kernel manager and then reboot.
5-After reboot load the profile and then set on boot the following:
For all the profiles including mine, @Asiier and @Mostafa Wael
On CPU tab:
Governor settings
Input boost frequencie and input boost milliseconds
Touchboost
Because my profiles (and future @Asiier profiles) have more than governor settings this is what you also need to set on boot on mine and @Asiier profiles:
Memory tab:
Low memory killer
Adaptive low memory killer
Dirty ratio
Dirty background ratio
Min free kbytes
Vfs cache pressure
On Miscellaneous tab:
I/O Scheduler
Advanced I/O options
Read ahead kb
Tcp congestion algorithm
On tools/user settings tab:
Swappiness (add this /proc/sys/vm/swappiness)
For Icecold profile set this extra to be applied on boot:
Cpu tab:
Max CPU frequencie (Big Cluster)
Graphics Tab:
Max GPU frequencie
Credits:
All credits goes for all the users that shared their own profiles on Nexus 5X and Nexus 6P respective threads and of course for Me @Asiier, @Mostafa Wael and @Senthil360 for bringing this ones to our device.
Introducing...
Shotgun!
StrategyThis profile's main goal is to provide absolute maximum performance when needed, but lies low quite well. You see, some times I see the CPU hitting some of the high freqs of 1190 while making something as simple as watching YouTube or playing some spotify tracks needlessly, and sometimes I feel it is a bit slower than it should be in things like brute multitasking. Most profiles do aim at bringing a mid-ground to rest on. But with the sensible words of one of my favourite idols Jeremy Clarkson, he says 'Power solves everything' and right he is. By eliminating the mid freqs of the Little cluster and efficiently using some specific frequency steps, you get some power savings by staying on lower freqs as much as possible, and even on brutal tasks you get the job done faster as well, since the CPU will give you all the power to finish the job as fast as it can, and hit back to idle faster. Some may be worried about the power consumption with that turbo policy, but as it can be viewed from @Asiier OP's graphs and info, the difference in the voltage is not that high to make you that worried at all, and even numbers say it. I got a mighty 7.5 hours SOT over more than a day on OOS 3.2.7 with Mono kernel (tbh i used to get that value, but now I get it so easily without any extra battery conservation techniques) and i get better performance as to my usage patterns. As for the big cluster, I chose to stick with the stock Big cluster settings for better efficiency with slight tweaks to make it a little bit more bursty and lie low quicker. @Asiier I must point out something there. In your OP you advised (sort of) to tweak the big Kryos to be acting in a bursty manner. Well that is partially right, coz these big Kryos are no A57s where they heat up badly if engaged, rather their sustainable performance is quite lovely, and the fact that as much as the little cluster being in charge of most of your tasks as the 'main cluster', it is not being relied on as much as it was in the S810, and the big cores take charge of the load much more than it was in the S810. So it is a bit tricky to tweak now, coz you don't want it to be very dormant like the A57 coz that will sacrifice performance and smoothness noticeably.
Also take that into consideration
Mostafa Wael said:
Also another thing that I want to clarify for everyone, what has the largest footprint in rendering some profiles laggy/more battery consuming or very efficient/lagfree is the ROM. You see, when you test the 'nominal' freq for a certain task, it also depends on the ROM. A quick example, if you wanted to see which is the nominal freq for scrolling a simple webpage or even a normal page without lags, by locking the freq to a certain step to test, while you do the scrolling test, there are background processes that inevitably take place whenever you use the phone. A stock OOS for instance potentially has more background processes running than say CM, and CM nightlies specially when they introduce a highly experimental change, can have some more background process (most likely you see the 'CyanogenMod system' ranking highest in your battery consumer apps) than a more stable nightly, and an AOSP may be having even less. A carefully debloated OOS can have less background services going on as well. Not to say a ROM is better than the other, but each ROM behaves uniquely and therefore when you scroll the webpage on say CM, it may be a tad smoother than when doing the same task on OOS with a specific profile, coz the frequency that is set to be used when scrolling the webpage, by any means, actually has to do the work of scrolling AND handle the background services running (be it a needless wakelock or a necessary service for some system apps or user apps, hence changing a CM nightly can actually cause some weird issues)
Now why don't you see this with the stock interactive governor settings? Coz it is like 'generic' settings that obeys these wakelocks and background services, and they will ramp up the freq readily with no 'restrictions', unlike custom settings profiles like mine, where I limit the CPU to use some certain freqs and cap the others, or Asiier's with whatever philosophy he uses.
In my opinion, the ROM has more effect on performance with each profile than a kernel. Of course a certain Kernel can have some battery tweaks or performance tweaks undergone, but they have the same effect as on the stock generic settings, in other words, these optimisations can already be felt even on stock settings and hence I sort of exclude it from the equation, since your target is to improve upon the stock governor settings
Click to expand...
Click to collapse
I suggest as always to turn off touchboost and use low input boost freqs for more time as always, but if you feel the need to use Touchboost or increase the input boost parameters, no problem at all. My usage is typing, reading, gaming for an hour or maybe slightly more, lots and lots of YouTube streaming and video playback, Spotify, WhatsApp and Telegram, XDA checking of course and some off-screen music playback. This profile has been tested on OOS 3.2.7 + Mono/Boeffla kernel, Arter97's CM13 + Arter97's custom kernel, OrionOS 11 Oct with its stock kernel
Downloads Shotgun_v1.0 EXKM profile here
init.d script here
Shotgun_v1.6 EXKM profile here
Shotgun_v1.7.6 EXKM profile here
->It is not 100% true that a newer version is better for you, but 99% it is <-
Changelist
Shotgun v1.0
initial release
Shotgun v1.6
-> eliminated more freqs for both little and big clusters, big cluster should be a little bit more dormant. Should be much
smoother AND more battery friendly
Shotgun v1.7.6
-> should be working fine without ANY Touchboost/Input boost/Bob boost settings (yes set input_boost freq to 0 freq for
litte and big cores anf for 0 ms to turn it off)
-> more smooth and battery friendly
>>>Shotgun is EOL after v1.7.6<<<
Burnout PR -> Burnout PR1, make sure to apply the gears here
-> Burnout PR2 Golden!. No gears needed, this is the absolute performance you can get! Gamers be cautious, this is NOT intended for gaming at all. Heavy browsing might be a bit warmer than your taste too. I have added some changes that work well with AOSP/CM LineageOS?/CAF Nougat but it seems that OB9 does NOT work as well as I expected.
Legacy: (imo Burnout PR2 moved leaps after that, but i never delete my trials since we are not the same
An intermediate profile has been cooked as well, dubbed as Burnout_Extreme. Learn more about it here
People who fail to automatically load the settings after booting even though the slider has been set to apply the settings on boot please notify me. Hope it does not fail you! Big thanks to @weeka89 and everybody here on this thread and the slack group for testing, couldn't have been that great or refined without your help and time, very much appreciated :good:
Pcsx2006 said:
Guys forgive me but can these profiles be used on stock rom OOS 3.2.7?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Yes, but you need custom kernel and app for changing tunables.
No custom kernel needed.
Just needs Interactive governor wich all of them brings.
patalao said:
No custom kernel needed.
Just needs Interactive governor wich all of them brings.
Click to expand...
Click to collapse
True. But there are also schedulers (zen) tuned in your profiles that are not found in stock kernel?
Yes, but if there`s no other tweaks in the kernel like the stock one it will only change governor settings and all other settings will remain untuched.
So I just need EX Kernel Manager app and load profile and good to go?
Sent from my ONEPLUS A3003 using Tapatalk
That`s it.
Just load the profile you want and enjoy it.
Pretty intresting. What values do u lads recommend for touchboost? Im on hawkpeper.
You could try 1036 to start.
If it runs well try with a lower value,if not rump up a bit between 1113/1228 for little cluster and 1112/1248 for big cluster.
Which kernel do you use daily? Personally been using Elementalx but from what I can see Blu seems to be a bit better with FairPark which I use daily
Great information! I look forward to seeing what comes of this. Now if we can just quantify load during certain things like browsing and other scenarios, that would give your values per freq more weight. Now I am unsure but I remember that Linaro used some tools** to work out Energy Aware Scheduling (EAS) for the 5x. Would be cool to gather such info and tie it in with your current findings.
** I believe they made changes in the kernel to quantify load and giving values a weight. But I would think there was more needed to create and EAS profile of the SD808 processor.
MrPhilo said:
Which kernel do you use daily? Personally been using Elementalx but from what I can see Blu seems to be a bit better with FairPark which I use daily
Click to expand...
Click to collapse
I use ElementalX kernel.
Didn`t try any of other`s.
There`s still INT3NSE kernel for OOS if you want to try.
RenderBroken said:
Great information! I look forward to seeing what comes of this. Now if we can just quantify load during certain things like browsing and other scenarios, that would give your values per freq more weight. Now I am unsure but I remember that Linaro used some tools** to work out Energy Aware Scheduling (EAS) for the 5x. Would be cool to gather such info and tie it in with your current findings.
** I believe they made changes in the kernel to quantify load and giving values a weight. But I would think there was more needed to create and EAS profile of the SD808 processor.
Click to expand...
Click to collapse
It`s hard to know the load of different scenarios because they are constanly changing.
We can estimate it but it won`t be very accurate.
For example:
Loading a web page full of pictures/videos will take a high load instead of a web page just with text.
MrPhilo said:
Which kernel do you use daily? Personally been using Elementalx but from what I can see Blu seems to be a bit better with FairPark which I use daily
Click to expand...
Click to collapse
You have to try, whatever works for you
That was just an example on how certain tweak behave in certain way, for you EX Kernel might give you better battery, you have to test
Will this work on OrionOS ? Caf Kernel no ElementX
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Yes, it will work on any rom/kernel that as interactive governor.
Awesome thread! Im gonna test GhostPepper with SultanCM13 + EX 0.32
Hey guys and girls,
I don´t have time to maintain 2 threads. Look in the Pixel XL forums.
Link is here: https://forum.xda-developers.com/pi...kernel-0-1-t3554330/post70974321#post70974321
So this post will be dedicated to information about EAS in general.
here is a good summary which also goes into detail regarding sched and schedutil.
Another amazing write up about alucardsched by a talented new dev @joshuous:
This is what I understand from tracing the Alucardsched code. I apologise if my understanding is incorrect.
Firstly, next frequency selection with Schedutil (very simple):
Code:
next_freq = 1.25 * Max_freq * current_util / max_util;
Now, here's a quick overview of one cycle of frequency selection in Alucardsched:
1. You have two key extra tunables: PUMP_INC_STEP and PUMP_DEC_STEP
2. Current utilisation here refers to the system's current demand. It is calculated using:
Code:
curr_util = (util * (100 + tunables->boost_perc)) / max_utilisation
The "util" is a value determined by the EAS scheduler.
3. Target load here refers to what processor is currently supplying. It is calculated using:
Code:
target_load = (current_freq * 100) / max_freq;
4. The key idea is to ensure that supply satisfies demand. That is, target load ≈ current load.
5. If target_load <= current_load (too little supply), then we want to increase frequencies to match the system’s load. For Alucardsched, frequency is increased by jumping up PUMP_INC_STEP number of steps in the OPP table. (By OPP table, I refer to the available frequencies that you can switch to)
6. If target_load > current_load (too much supply), then we want to decrease frequencies to match the system’s load. For Alucardsched, frequency is decreased by jumping down PUMP_DEC_STEP number of steps in the OPP table.
7. Do note that Alucardsched jumps several frequency steps, compared to Schedutil and Interactive which try to jump immediately to a calculated next frequency. In this way, Alucardsched doesn't care about the specific value of the next speed. It's like driving a car, and deciding to increase gears by several steps instead of deciding to jump immediately to a specific gear.
Extra Tunables
FREQ_RESPONSIVENESS
PUMP_INC_STEP_AT_MIN_FREQ
PUMP_DEC_STEP_AT_MIN_FREQ
Sometimes you want the "pumping" behaviour to behave differently at lower and higher frequencies. FREQ_RESPONSIVENESS can be seen as the mark that divides the low and high frequencies. If the current frequency is less than FREQ_RESPONSIVENESS, the number of frequency skips will be PUMP_INC_STEP_AT_MIN_FREQ and PUMP_DEC_STEP_AT_MIN_FREQ instead of the usual PUMP_INC_STEP and PUMP_DEC_STEP.
How is it used? If your frequency is low (lower than FREQ_RESPONSIVENESS) and your system demand is high, you ideally want to boost frequency speeds quickly. This is when PUMP_INC_STEP_AT_MIN_FREQ kicks in. PUMP_INC_STEP_AT_MIN_FREQ is usually (and should be) a larger value than PUMP_INC_STEP. When your frequency is high (higher than FREQ_RESPONSIVENESS) and your system demand is high, you don't want to be jumping so many steps up otherwise you will hit max frequencies too quickly (overkill). I'm pretty sure you can figure out how PUMP_DEC_STEP and PUMP_DEC_STEP_AT_MIN_FREQ works after having read this paragraph
Tldr;
Schedutil: simpler
Alucardsched: more tunable
Code:
IF CURRENT_FREQ < FREQ_RESPONSIVENESS:
PUMP_INC_STEP_AT_MIN_FREQ and PUMP_DEC_STEP_AT_MIN_FREQ are used
ELSE:
PUMP_INC_STEP and PUMP_DEC_STEP are used
PUMP_INC_STEP_AT_MIN_FREQ should be larger than PUMP_INC_STEP.
Note: There is however a potential problem (if you may call it one) with Alucardsched: just like Interactive you rely almost entirely on heuristics (trial and error) to control your frequency jumps instead of letting the system choose it for you, like in Schedutil. In that way, Alucardsched detracts from the goal of Schedutil to provide a simple frequency choosing mechanism. Without the proper tuning to meet your specific usage, it is likely that your frequencies will overshoot or undershoot past the needed load on Alucardsched (just like in Interactive). I would recommend that you play with the tunables to see what works best for you.
Here is information about energy-dcfc (Dynamic Capacity and Frequency Capping):
This new governor is based on schedutil. It uses target_load variables as thresholds to let the governor decide when to cap the frequencies for both clusters. These variables are called "load1_cap" and "load2_cap". Load1_cap corresponds to target_load1 meaning anything that is below target_load1, it caps using load1_cap. Anything above target_load1 and below target_load2, use load2_cap. Anything above target_load 2 and the maximum frequency will be used.
As a result of this behaviour, bit shift value must be set to 1. Anything higher than 1 and frequency scaling will be extremely slow. This is because the lower the maximum frequency, the lower the next frequency target is because the frequency range is being limited.
AS OF V009: The governor has now incorporated @Kyuubi10 's schedutil dynamic formula change. When load is below target_load1 it will use add bitshift in the formula. If load is above target_load1 but below target_load2, it won't use any bit shifting at all. If load is more than target_load2, it will subtract bitshift in the formula. This has proven to be very efficient with a touchboost-like behaviour when scrolling (Up to the capped frequency of this governor), then steady performance in between, and on heavy workloads it will not just stay on maximum frequency, in fact it will hover around 1.3-1.9GHz to ensure thermals are good as well as battery endurance.
This governor is aimed with maximum efficiency in mind. Do not expect outstanding performance with this governor.
helix_schedutil explained by @Kyuubi10
To understand Helix_schedutil you must first understand the original schedutil algorithm.
Here it is:
next_freq = maxfreq + (maxfreq >> bitshift) * util/maxcapacity
Explanation:
The most obvious difference of this algorithm is that it moves away from the idea of scaling frequencies up or down which were used in previous generations of governors.
Instead the aim of the above algorithm is to calculate the most appropriate frequency for the TOTAL CPU load.
NOTE: This is TOTAL load on CPU, not just load for the current frequency step as Interactive used to calculate with.
Now, for you numberphiles like myself that like understanding algorithms... Let's break it down:
"util/maxcapacity = Load."
The above creates a percentage value in decimal format (80% = 0.8) which represents the TOTAL load on CPU.
the algorithm now reads the following way:
next_freq = maxfreq + (maxfreq >> bitshift) * load
"maxfreq + (maxfreq >> bitshift)"
Essentially the aim of the above is to ensure that next_freq is always a little higher than the exact value needed to cover the load.
Bitshift: (paraphrasing @ZeroInfinity) in programming the ">>" mathematical function allows for shifting the binary values towards the direction of the arrows by "N" times.
In this case it is towards the right.
The relationship between "N" and the calculation in the "()" is as follows:
Bitshift = 1 = maxfreq/2
Bitshift = 2 = maxfreq/4
Bitshift = 3 = maxfreq/8
If the "+()" didn't exist in the algorithm, the chosen frequency would be exactly enough to cover the load.
If load is 0.6, aka 60%, all you need is a frequency = 60% of max frequency.
This would be bad since it doesn't leave any capacity/bandwidth leftover for inevitable bumps in load, nor space for EAS itself to run. Thus inevitably creating lags.
To keep a bit of free bandwidth you add "(maxfreq >> bitshift)".
Finally the problem I encountered, if bitshift = 2, then the result of the algorithm is that any load above 0.8 will result in a next_freq HIGHER than maxfreq. - This is your tipping point. As any load higher than 80% will wake up a new CPU.
Which means you have still about 20% of the CPU's max capacity being unused. Such a CPU is only 80% efficient.
Therefore by increasing bitshift to 3, the algorithm reads:
"maxfreq+(maxfreq/8)*load = next_freq"
This way you can use 89% of capacity before reaching max frequency of the CPU.
With bitshift=4 it reads:
"maxfreq+(maxfreq/16)*load = next_freq"
This allows you to use up to 94% total CPU load before reaching max frequency.
While this is great for improving efficiency at the higher frequencies, it doesn't leave enough bandwidth when calculating lower frequencies, and creates lag when load spikes at lower frequencies.
Update to the explanation:
After being inspired by the concept of @ZeroInfinity's new governor - Energy-DCFC, I decided to carry out a couple of tests on HTC 10 using variations of Helix_Schedutil.
The focus was stress-testing by increasing the current frequency load above 100%. (AKA Use up all of the bandwidth of the current frequency step.)
After the testing me and Zero worked on this new version of Helix_Schedutil.
The current behaviour of the governor is the following:
- Boost frequencies when load is below Target_Load1. (Boost can be increased by DECREASING bit_shift1 value.)
- Between Target_Loads there is no bit_shift at all. The governor just uses the following algorithm instead - (max_freq*util/max = next_freq)
- Loads higher than Target_Load2 will be THROTTLED. Bit_Shift2 here is subtracted rather than added. (Throttle effect can be increased by DECREASING bit_shift2 value.)
The result is that low freqs have spare bandwidth to avoid lags, middle frequencies leave no extra bandwidth at all, while higher frequencies are throttled to save battery.
Another focus of the governor update is to reduce overhead as much as possible. This results in a very responsive governor which isn't overly demanding on battery life.
Schedtune.boost values recommended for use with this governor:
Top_App: 5
Foreground: -50
Background: -50
Global: -50
Energy-DCFC is still recommended for those who prefer battery life over performance, but if you prefer greater performance then this governor can be used without making you feel guilty about wasting battery.
correction a misconception:
Some people describe tipping point as the load threshold which the governor uses to decide whether to ramp up or down.
While if you look into the behaviour of the governor it may appear that it behaves in such a way, it is technically incorrect.
As I mentioned previously this new algorithm moves away from the behaviour of legacy governor algorithms which focus on the current frequency load.
This governor does no ramping up or down.
It isn't even aware of the current frequency load, as it only knows the load relative to max capacity.
The misconception appears based on a property of the algorithm that results in a consistent load at any chosen frequency. This is a coincidental result of the algorithm, even though the algorithm is completely unaware of it.
Tipping point is in fact the load percentage at which the CPU reaches max frequency and any increase in load forces it to wake up a new core
here is some Information about pwrutil governor:
This new governor is based on schedutil.
A much simpler yet very effective governor based on schedutil. All this changes is the calculation to get the next frequency. Rather than using bit shift to calculate tipping point and what not, we don't use it at all. This is much much more efficient if you use my program called "schedutilCalculator" to calculate what the next frequency is. For example, a load of 25% with a max freq of 2150400 will get 500MHz as next frequency. A load of 50% will get 1GHz as next frequency. A load of 75% will get 1.5-1.6GHz as next frequency. A load of 100% will get 2.15GHz as next frequency. You can see the lower the load, the much lower the frequency selection will be, but the higher the load and the higher the frequency selection is. So it can go from a very low powered state with 50% load and under, to a high performance state from 75% load and above.
Includes a tunable called "utilboost" which is basically a load multiplier - it makes load higher than it is perceived by the governor, thus making next frequency selection higher. Remember utilisation does not equal load. The equation of calculating load is util / max capacity of a CPU (which should be 1024). So 512 / 1024 = 0.5 (50% load).
UTIL BOOST IS NOT MEANT TO BE USED WITH SCHEDTUNE.BOOST AT THE SAME TIME! EITHER USE ONE OR THE OTHER OR ELSE PERFORMANCE WILL BE OVERKILL AND BATTERY LIFE WILL DRAIN MUCH FASTER!!!
Util boost is supposed to be a replacement of schedtune.boost. schedtune.boost applies boosting to both clusters, whereas util boost allows boosting per-cluster so users can have much more control.
how to gather logs:
There are several apps that can do this process for you, Here is one: PlayStore: SysLog
And here is another: PlayStore: Andy Log (ROOT)
ramopps: is an oops/panic logger that writes its logs to RAM before the system
crashes. It works by logging oopses and panics in a circular buffer. Ramoops
needs a system with persistent RAM so that the content of that area can
survive after a restart.
logcat: the logoutput of the Android system
kernel log: (kmsg / dmesg): the kernel messages
Additionally there's the last_kmsg which is a dump of the kernel log until the last shutdown.
radio log: the log outpur ot your System / BB / RIL communication
4
ramopps:Some Documentation on Ramopps
Normal Logcat:
Radio Logcat:
Ramoops:
Via adb:
adb shell su -c cat /sys/fs/pstore/console-ramoops > kmsg.txt
Via terminal on phone:
su
cat /sys/fs/pstore/console-ramoops > /sdcard/kmsg.txt
Kernel Log:
Kernel Log:
adb shell su -c dmesg > dmesg.log
Last_Kmsg:NOTE:
New location of last_kmsg on Android 6.0 and above: /sys/fs/pstore/console-ramoops
adb shell su -c "cat /proc/last_kmsg" > last_kmsg.log
NOTES:
-v time will include timestamps in the logcats
-d will export the complete log.
If you want to save a continuous log you can remove the -d parameter - then you need to cancel the logging process via CTRL+C.
To export a continuous kernel log use adb shell su -c "cat /proc/kmsg" > dmesg.log (and cancel it via CTRL+C again).
PS: This Document was taked from another XDA Thread Called: [Reference] How to get useful logs
URL: http://forum.xda-developers.com/showthread.php?t=2185929
Also check this one out: [Tutorial] How To Logcat
I only Revived it a bit for ramopps.
I will update this more at a later time..
Attemped install on Pixel, ended up with black screen after white "unlocked booloader screen" had to reinstall system and custom rom.
Well it was confirmed working before.
Did anybody else flashed it successfully? And please follow my instructions in the op.
Freak07 said:
Well it was confirmed working before.
Did anybody else flashed it successfully? And please follow my instructions in the op.
Click to expand...
Click to collapse
It worked for me by following instructions in the OP
Followed the instructions from OP, works fine for me!
Thanks for your works, try it out now
ne0ns4l4m4nder said:
Attemped install on Pixel, ended up with black screen after white "unlocked booloader screen" had to reinstall system and custom rom.
Click to expand...
Click to collapse
Working fine here following OP, thanks for another Kernel brotha!!
so idoes this kernal work better in lineage ROMS like hexa and Resurrection Remix v5.8.1 Roms ???
abunhyan said:
so idoes this kernal work better in lineage ROMS like hexa and Resurrection Remix v5.8.1 Roms ???
Click to expand...
Click to collapse
Make sure to use supersu and not the inbuilt lineage superuser.
On rr it should run without an issue. At least it was reported in the xl thread.
Currently rooted on 7.1.1 and haven't ventured away from stock. It should be good just to follow instructions and flash?
TheBurgh said:
Currently rooted on 7.1.1 and haven't ventured away from stock. It should be good just to follow instructions and flash?
Click to expand...
Click to collapse
yes. Make a backup just in case. And use the latest supersu zip.
abunhyan said:
so idoes this kernal work better in lineage ROMS like hexa and Resurrection Remix v5.8.1 Roms ???
Click to expand...
Click to collapse
Running great on RR with latest SU ?
Running great in RR here also with 10% battery drain in 10 hour !!! thats great result
one thing tho double tap to weak function not working from lock screen at all!!!!
abunhyan said:
Running great in RR here also with 10% battery drain in 10 hour !!! thats great result
one thing tho double tap to weak function not working from lock screen at all!!!!
Click to expand...
Click to collapse
What exactly is your problem?
You can enable dt2w in exkm. But the one that is in the rom will be overwritten as the kernel one works more reliable.
Freak07 said:
What exactly is your problem?
You can enable dt2w in exkm. But the one that is in the rom will be overwritten as the kernel one works more reliable.
Click to expand...
Click to collapse
its Dt2w not functioning after installing the kernal and its was working well before that
can u explain how i can enable it?
and regard the sound control app can u advice which app i can use to enhance sound quilty by using Bluetooth headset
Thanks for ur great help:good:
abunhyan said:
its Dt2w not functioning after installing the kernal and its was working well before that
can u explain how i can enable it?
and regard the sound control app can u advice which app i can use to enhance sound quilty by using Bluetooth headset
Thanks for ur great help:good:
Click to expand...
Click to collapse
For controlling dt2w use this app.
https://play.google.com/store/apps/details?id=flar2.exkernelmanager
You can find the option in the sector gestures. Just enable it and you are set.
Audio options are under sound.
The sound for bluetooth can only be altered via software mods like viper4android.
If you really care about sound quality you should use wired headphones. But the quality for bluetooth may be enhanced by default.
hey guys and girls,
I have a new kernel now in testing. If I have no Issues I will post it in a few hours.
I added the possibility to use sdcardfs. big thanks to @DespairFactor here, he provided some help.
you just have to add ro.sys.sdcardfs=true to your build.prop
I tested it for two days now and encountered no issue. Using it may improve I/O performance.
here is some reading, in case you are interested:
https://www.xda-developers.com/divi...les-fuse-replacement-will-reduce-io-overhead/
I also added two new governors developed by @alucard_24, called alucardsched and darknesssched.
They are both based of on EAS. You may use them as an alternative to sched and schedutil.
I think alucardsched is more battery friendly. But I had quite a few stutters with it. Maybe you guys can give feedback on this.
shindiggity said:
Running great on RR with latest SU ?
Click to expand...
Click to collapse
Do you have I/0 options in your kernel manager? And are you using supersu, or the SU baked into the ROM?
Freak07 said:
For controlling dt2w use this app.
https://play.google.com/store/apps/details?id=flar2.exkernelmanager
You can find the option in the sector gestures. Just enable it and you are set.
Audio options are under sound.
The sound for bluetooth can only be altered via software mods like viper4android.
If you really care about sound quality you should use wired headphones. But the quality for bluetooth may be enhanced by default.
Click to expand...
Click to collapse
by dt2w, he means the stock android implementation where you double tap into the ambient display I think
Hello all.
After about a month of researching and testing with the Galaxy S5, I'm finally happy with my SmartKernel profile, with the interactive governor carefully tuned, using known resources and countless trials and errors, as well as other various tweaks, like VM and I/O scheduler, and decided to publish on it's own thread.
The main resources I've used for the Interactive governor tuning includes the well known:
Android Modders Guide;
[GUIDE] Advanced Interactive Governor Tweaks; Buttery smooth and insane battery life! for Nexus 5X; and it's twin
[GUIDE] Advanced Interactive Governor Tweaks; Buttery smooth and insane battery life! for HTC Evo 4G.
First of all, this tweaks should be a little sensible to the ROM, kernel, apps, and other tweaks your using. Like, I just found out that Havoc pie style quicktile settings use way more juice then if I turn it off and go back to Oreo default. Bellow you will see the apps I mainly crafted this profile in mind.
For reference: I have a klte with latest Oreo Havoc installed, nano OpenGapps, Magisk and the SmartPack kernel. For apps I use Facebook lite, cause the normal app is just a big hog, whatsapp and instagram social apps. Chrome. I don't use the Google App or Greenify(uninstall/delete velvet). And play lots of games like Clash Royale, Star Wars Force Arena and Arena of Valor. BetterBatteryStats.
And a lot of random apps that normally don't stay on the background.
DESCRIPTION
On the SmartPack manager profile:
. HIghly Efficient Interactive Governor Tunables (most important part);
. No Touchboost or any other boost, only the governor dictates to CPU in which clock it should to be;
. Overclock disabled, but can be enabled at you will;
. No underclock, I do undervolt my CPU but this you need to find your specific device numbers, mine won't cut;
. LazyPlug Hotplug with all 4 cores on all the time (better performance while using and battery savings while at idle);
. I/O Schedulers: ZEN (the L-Speed profile complement this part, with it's scheduler tunables);
. READ-AHEAD internal 1024kb (for 16GB or more) and external 512 kb (for my 8GB SDCard, adjust accordingly to yours SD Card size conform described here
. Adreno Idler disabled: it doesn't make any effect;
. Speaker Driver Leakage disabled and Boeffla Sound enabled with 0 gain as it does make a difference, at least with ViperFX magisk module installed;
. Screen minimum RGB set to 1 (0 won't stick), for a darker dark on our AMOLED, plus some tweaks;
. Led blinking fade enable;
. VM tweaks: dirty_ratio 30 and dirty_background_ratio 15; for minor battery improvement, with a perceptible lower termperature/cpu usage and almost imperceptible performance hit;
. VM tweaks: page-cluster 1; for better multitasking/memory management
. VM tweaks: oom_dump_tasks 0; disable depuration of dumping tasks, less cpu needed.
. LMK values: 32 48 64 128 176 208 (MBs)
L-Speed Profile
. Logging and I/O stats disabled;
. Animations speed set to 0.25x;
. System battery save trigger at 20%;
If you need to provide or read logs, enable logging and i/o stats back on l speed; i/o stats and oom_dump_tasks 1 on smartpack manager
INSTALLATION
Unzip the attached file and import with SmartPack Manager:
The attached profile should be imported, applied and marked as to run "On Boot" to make effect. It will only work with SmartPack Manager and Kernels for both Nougat and Oreo, maybe even Pie. Just try it, and report back. If you wanna fine tune it. You need to use an app or enable the "show cpu clocks" option if your rom supports it (like Havoc, RR and many more), and monitor at which frequencies the lags happens, while doing the jobs you want the CPU to be efficient at. And mainly tweak the target_load according, maybe above_high_speed delays of 1,7GHz clock and above. You need to read the guides more in-dept too see exactly how to do it, but I'll paste here the most important parts on how to tweak this settings more to your Galaxy S5, with your particularly apps and ROM:
soniCron said:
Optimize Idle Frequency
Now that you've got the base configuration, we need to tweak it so that the CPU stays at your efficient idle frequency (384Mhz in this case) without spontaneously jumping when your phone is actually idle. To do this, open a CPU monitor that displays the current core frequencies (I like CoolTool, but you can use what you like as long as it doesn't significantly impact the CPU use--you're best off using a passive monitor and checking the results after 30-60 seconds of no activity), watch the frequencies and see how often they go above your efficient idle frequency when you're not doing anything at all, and adjust the following:
timer_rate - If your idle frequency is not being exceeded much, adjust this downward in increments of 5000 until it is, then increase it by 5000. If your idle frequency is being exceeded often, adjust this upward in increments of 5000 until your CPU primarily stays at or below your desired idle frequency.
above_highspeed_delay - Only if your timer_rate has matched or exceeded 50000 and still won't stay at or below your desired idle frequency most of the time, set timer_rate to 50000 and adjust the "20000" portion of the value upwards in increments of 5000 until the idle frequency has stabilized.
The lower these two values are, the more snappy/lag free your system will be. So try to get them as low as possible without the idle frequency being exceeded too much, as this inversely affects the snappiness and efficiency of your phone when you're not doing anything. Lower = snappier but uses more CPU when you're not doing anything (such as reading a webpage); higher = less snappy but stays in a power saving state more often reducing CPU use when you're not interacting with the device. These are the most critical in determining your idle power savings, so keep that in mind if you want the most battery life!
Enhance Task Responsiveness
Now use the efficiency and nominal clock rate correlations you made for your master clock rate list in the section above and adjust your frequencies to suit your usage patterns. For example, I had web page scrolling as my 710Mhz/864Mhz rates, so I will open a web page and scroll and see how everything feels. If it feels sluggish, I will increase all the references to "710000" in both above_highspeed_delay and target_loads upwards to the next available clock rate until that task is smooth. What you are looking for is constant poor/sluggish performance when the task you're testing for is using its highest CPU use. If the task becomes sluggish/stuttery as it winds down (such as a scrolling webpage slowing to a stop), we will address that next, so do not take that behavior into consideration as you adjust these values! If the task is smooth until (or after) it slows down, then you have reached your optimal clock rate and can move on.
If you need to exceed your nominal clock rate for a particular task, first measure it again just to be sure you had it correct. If you did indeed have it correct, leave it at your nominal clock rate and adjust the value after the colon next to the task frequency you're tuning downward in increments of 5. For example, if my setting of "864000:80" is still not sufficient, I will adjust it first to "864000:75", then "864000:70", and so on until the task is smooth. However, it almost certainly won't come to this, but if you reach ":50" and the task still isn't performing how you want, set it back to ":80" and increase the clock step once more, then decrease the ":80" until it is smooth.
Do the same for each other frequency in your master clock rate list until you are satisfied. If you have chosen to use more than 2 primary clock rates, add them and use ":##" values between the two surrounding frequency values.
Fix Stuttering
Now that you have adjusted your frequencies for optimal high CPU use in each given task, you may notice some stuttering as the task winds down. (Such as a scrolling webpage slowing to a stop.) If this bothers you, you can tweak this at the expense of some (minor) battery life by adjusting min_sample_time up in increments of 5000 until you are satisfied.
If you have exceeded a value of 100000 for the min_sample_time setting and still are not satisfied, change it back to 40000 and increase (and re-optimize) your idle frequency by one step. This will impact battery life more, but less than if you were to keep increasing the value of min_sample_time.
Adjust High Load Clock Rates
You're almost done! Now you can leave everything as is and be satisfied with your amazing, buttery smooth, snappy experience, or you can optionally tweak things further to either increase the responsiveness of high load tasks (such as loading image previews in Gallery) or increase battery life somewhat.
Adjust the final delay value in above_highspeed_delay to suit your needs. The default ("150000") means that the CPU load at the highest set frequency (default "1026000") will have to be sustained for 150ms before it allows the load to go above that frequency. Increasing this value will prevent the CPU from reaching higher frequencies (which may be unnecessary) as often, saving battery life. This will come at the expense of burst-type high CPU load tasks. Reducing it will allow the CPU to reach higher frequencies more often, at the expense of battery life. However, adjusting this is probably unnecessary, as it will most likely not yield any perceptible difference in performance. It is recommended to leave this value at its default.
Click to expand...
Click to collapse
Besides CPU Voltage and Battery, all tabs on the manager are modified and tuned to achieve best performance, while having best efficiency possible. Is not a battery or a performance, but a efficiency profile.
Refer to this thread if you wanna undervolt your device with a well know secure margin for the CPU Snapdragon 801 2.5ghz MSM8974AC, which our Galaxy S5 contains:
[GUIDE] Snapdragon 805/801/800/600 Clock & Voltage (PVS bin) guide by HD2Owner I've managed to achieve much lower voltages then PSV15+ devices (refer to the sheets).
I also attached the excel spreadsheet I've made with all this thread information, both governor guide equations on target loads, undervolting guide findings, and made my own base calculations and settings. Feel free to use, modify, and discuss it with me. You will see that I based the most efficient clocks in an original thought about which ones are the most efficient, instead of plotting the differentials between voltages of each clocks, I did plotted the difference of the clock divided by voltage, which on itself should be how much voltage 1 mhz uses, on each clock rate. So, the higher the number, more speed each clock rate give us by voltage used. It's kinda complicated and idk if I explained it the right way, and even if it really makes sense under scrutiny, but I couldn't think why not myself, so, any inputs are welcome.
I own my thanks to all the following XDA fellows, without them, I could not have achieved this:
@sunilpaulmathew for the SmartPack Kernel which is the only kernel for the S5 that can turn that damned MPDecision off and SmartPack Manager;
@soniCron for both of the governos Guides;
@Saber for the Android Modders Guide which is immensely helpful.
CHANGELOGS
L-Speed Profile (download the app on PlayStore):
011118 lspeed profile
- first release
031118 lspeed profile
- Removed most tweaks, only left minor stuff, refer to the OP.
L Speed profile is not really needed, SmartPack will do 99% of the job.
SmartPack Manger Profile (download the kernel and the app here):
301018
- first release.
011118 smartpack profile:
- A few Interactive governor tweaks;
- Removed Virtual Memory and LMK tweaks, let it on default or use L-Speed to optimize, as it does a much better job then me.
031118 smartpack profile:
- Governor tunning: better high load management;
- Included back only 3 sane VM configurations, no more freezing, better cooling (less cpu needed, while performance barely took a hit)
- Sane LMK configurations, kills apps not being used faster, retain some multitasking while not let it slow down the device
081118 smartpack profile:
- target_load (no changes up to 1497600) ...1728000:89 1958400:91 2265600:95 -> ...1728000:88 1958400:90 2265600:95
- above_hispeed 20000 1190400:60000 1497600:64000 1728000:77000 1958400:84000 2265600:130000 -> 20000 1190400:60000 1728000:68000 1958400:79000 2265600:110000
- external storage read-ahead from 512 -> 2048 (because I've gone from a 8GB to a 32 GB SDCard, ADJUST YOURS ACCORDINGLY TO https://androidmodguide.blogspot.com/p/io-schedulers.html)
- cleaned unused and already default values from profile
101118 smartpack profile:
- Turned Alucard off, accidentally activated it with Lazyplug also enabled, not good!
- Managed to go 1 point higher on freq 1497 MHz, the 2 hotplugs enabled were messing with me trying to test this change before, also 1 point lower on the idle freq 268 MHz for smoother scrolling while still staying at freq 268 while idle. And some more high load optimizations now that I only got 1 hotplug enabled as it should always be.
- target_loads from 268800:29 ... 1497600:86 1574400:5 1728000:88 1958400:90 2265600:95 to -> 268800:28 ... 1497600:87 1574400:5 1728000:89 1958400:91 2265600:94
- above_hispeed 20000 1190400:60000 1728000:68000 1958400:79000 2265600:110000 -> 20000 1190400:60000 1728000:74000 1958400:82000 2265600:120000
- dirty_background_ratio 15 -> 10
221118 smartpack profile:
. Reverted new SmartPack Kernel v14r4 changes to Virtual Memory back to original default configurations, if you've have had reboots this should fix it, please report back here and/or the kernel's thread;
. More changes to Interactive governor aiming to optimize high load scenarios according to the profile philosophy:
. above_hispeed_delay 20000 1190400:60000 1728000:74000 1958400:82000 2265600:120000 -> 20000 1190400:60000 1728000:74000 1958400:80000 2265600:105000;
. Enabled fast charge configurations, set at 1200 mhA as I found it's a good charging speed without heating the phone too much on my hot city, nothing you can't change at your will.
241218 smartpack profile:
. Restored missing min_sample_time tunable since 081018 profile
. dirty_ratio 30 -> 25
. General cleanup
. Tested on Pie
@justjr
Nice work friend. Great to see that your finally open a place to share your findings. In my opinion, your profile should work on any klte device with minimum kernel support. I haven't seen much SmartPack specific stuff in your profile except some hotplug related things. So, if you make it as a shell script instead of KA/SP-Kernel Manager profile, it shall be beneficial for everyone. Anyway, as usual, I'll kang your changes to my kernel default profile
sunilpaulmathew said:
@justjr
Nice work friend. Great to see that your finally open a place to share your findings. In my opinion, your profile should work on any klte device with minimum kernel support. I haven't seen much SmartPack specific stuff in your profile except some hotplug related things. So, if you make it as a shell script instead of KA/SP-Kernel Manager profile, it shall be beneficial for everyone. Anyway, as usual, I'll kang your changes to my kernel default profile
Click to expand...
Click to collapse
I think this profile should work on original Kernel Adiutor, or any fork of it, shouldn't it?
It should work on any other kernel if the changes really stick, and uses the same paths, but MPDecision will mess with frequencies all the time. It would still follow the governor tunables anyway, but it will interfere with it and in the end will not gain too much efficiency out of it.
Actually I only state it is for SmartPack specifically because of the fact that is the only one I can disable MPDecision on our device, and because I included all the tweaks other then just governor tweaks.
Actually I'm kinda lazy right now, but I could do a shell script if any demand for it shows up.
justjr said:
I think this profile should work on original Kernel Adiutor, or any fork of it, shouldn't it?
It should work on any other kernel if the changes really stick, and uses the same paths, but MPDecision will mess with frequencies all the time. It would still follow the governor tunables anyway, but it will interfere with it and in the end will not gain too much efficiency out of it.
Actually I only state it is for SmartPack specifically because of the fact that is the only one I can disable MPDecision on our device, and because I included all the tweaks other then just governor tweaks.
Actually I'm kinda lazy right now, but I could do a shell script if any demand for it shows up.
Click to expand...
Click to collapse
Well, official KA (free version) doesn't allow to import profiles (paid feature), but all other mods does.
and yes, it is supposed to work on every klte device as long as the sysfs paths exist. Means it should work on any custom Kernel with lazyplug support (most of the other stuff are actually included in the stock kernel itself). Of course, the default settings provided by the kernel devs might conflict. e.g., as you said, MPDecision, although the line "stop mpdecison" in your profile will disable it. By the way, I'm not the only one who disabled mpdecision and relay on other hotplugs in this klte community
sunilpaulmathew said:
Well, official KA (free version) doesn't allow to import profiles (paid feature), but all other mods does.
and yes, it is supposed to work on every klte device as long as the sysfs paths exist. Means it should work on any custom Kernel with lazyplug support (most of the other stuff are actually included in the stock kernel itself). Of course, the default settings provided by the kernel devs might conflict. e.g., as you said, MPDecision, although the line "stop mpdecison" in your profile will disable it. By the way, I'm not the only one who disabled mpdecision and relay on other hotplugs in this klte community
Click to expand...
Click to collapse
Oh, really? Which one? I must had missed it. I've tested all kernels I could find. At least all the remotely up-to-date, like venom, tuned and boeffla kernels. I didn't see any option to change hotplugs on any. There were hotplug profiles, to keep cores online and stuff, but everyone of them keep changing min and max frequency at MPDecision will.
justjr said:
Oh, really? Which one? I must had missed it. I've tested all kernels I could find. At least all the remotely up-to-date, like venom, tuned and boeffla kernels. I didn't see any option to change hotplugs on any. There were hotplug profiles, to keep cores online and stuff, but everyone of them keep changing min and max frequency at MPDecision will.
Click to expand...
Click to collapse
Boeffla and Venom largely depends on MPDecision. However, as I remember correctly (on the basis of the code review, not from my experience, I never used it by myself), the Tuned kernel by @fbs disabled MPDecision upon booting to work well with its own Tuned hotplug.
sunilpaulmathew said:
Boeffla and Venom largely depends on MPDecision. However, as I remember correctly (on the basis of the code review, not from my experience, I never used it by myself), the Tuned kernel by @fbs disabled MPDecision upon booting to work well with its own Tuned hotplug.
Click to expand...
Click to collapse
I tested it too. And although he claims he uses hes own hotplug, it behave the same as boeffla and venom, it has the same profiles, and it does changes min and max freq out of my control.
justjr said:
I tested it too. And although he claims he uses hes own hotplug, it behave the same as boeffla and venom, it has the same profiles, and it does changes min and max freq out of my control.
Click to expand...
Click to collapse
no it doesn't change any freqs
it works by disabling or enabling cores, just that.
if any cpu reaches the maximum frequency, it enables one more core (as the other ones are already giving their best)
if any cpu reaches the minimum frequency too many times, it disables it (as it doesn't seem to be needed)
so in any moment you can have all 4 cores enabled or only 1. even with display on or off, it doesn't matter
mpdecision will NEVER let you use just 1 core, and it doesn't react as fast: battery hog
fbs said:
no it doesn't change any freqs
it works by disabling or enabling cores, just that.
if any cpu reaches the maximum frequency, it enables one more core (as the other ones are already giving their best)
if any cpu reaches the minimum frequency too many times, it disables it (as it doesn't seem to be needed)
so in any moment you can have all 4 cores enabled or only 1. even with display on or off, it doesn't matter
mpdecision will NEVER let you use just 1 core, and it doesn't react as fast: battery hog
Click to expand...
Click to collapse
Alright, sorry then, it seems my memories got clouded or something, as I've tested it about a month ago. I might go back any day just to test that. Thanks for giving us one more kernel option! :good:
UPDATE OP WITH
Description
Changelogs
New profile 011118, changelog:
. Few governor tweaks
. Removed Virtual Memory and LMK tweaks, let it on default or use L-Speed to optimize, it does a much better job then me
Also uploading the L-Speed profile I use so those who want to use it like I do, but you can choose any VM and LMK profile that fits your needs on the app. Just don't use the governor tuner because it will mess with my tunings, and l-speed governor tuning is a generic one for all devices, VM and LMK is OK to use generic tweaks, but not on governor.
@sunilpaulmathew I took a look at l-speed virtual memory and lmk profiles and they make incredible sense, take a look yourself, they may be what you need to put o that spectrum profiles, because above all they are device independent and do make a noticeable difference.
Is it valide for stock rom (6.0)?
lollazzo said:
Is it valide for stock rom (6.0)?
Click to expand...
Click to collapse
What kernel? It should work if the kernel have lazyplug or alucard hotplug, if is the late you just have to enable it.
Updates
SmartPack Manager Profile 031118:
. Governor tunning: better high load management;
. Included back only 3 sane VM configurations, no more freezing, better cooling (less cpu needed, while performance barely took a hit)
. Sane LMK configurations, kills apps not being used faster, retain some multitasking while not let it slow down the device
LSpeed Profile 031118:
. Removed most tweaks, only left minor stuff, refer to the OP.
L Speed profile is not really needed, SmartPack will do 99% of the job.
OP: descriptions for both profiles updated.
New profile.
I returned to Nougat, RR 5.8.5, same configs works awesomely and the device is cooler/faster then with Oreo. But still will works the same with both N/O and even Pie, not tested.
I also reinstalled Hearthstone as a high load app so I could tune the governor better for it, and up to 1490 MHz nothing is changed, and changed a bit target_loads and above_hispeed of the clocks above it so Hearthstone (and any other high load apps, or, using split screen with youtube) runs smoother/without lags and tasks like opening an app will finish faster, and also go back to a lower clock faster because of that. So, in the end it stays most of the time at lower clocks anyway, only difference is that it will jump faster when needed for less waiting time/lag.
Just to clarify, this is not suppose to waste battery, or drain it faster. As an efficiency profile the goal is to do the job you the want faster the possible, ramping up to the clocks that the jobs demands, without lags (or minimal lags) and go back to idle/lower clocks as soon as high clocks aren't needed anymore, so it don't overstay at a higher clocks then it's needed, very simple.
So, going to a high clock doesn't mean less battery life, finishing a job fast and going back to idle is the key to achieve more battery life, specially during deep sleep, when you really want your device go back to deep sleep fast, but also at any other time. Watching youtube, browsing and using low demand apps still uses the same clocks.
Also, on top of that you will spend more time USING the device instead of WAITING for it to finish a job. Battery life is very subjective, and SoT doesn't mean nothing IRL, I mean, are you spend that SoT waiting for a job to finish or to actually use the device?
081118 smartpack profile:
- target_load (no changes up to 1497600) ...1728000:89 1958400:91 2265600:95 -> ...1728000:88 1958400:90 2265600:95
- above_hispeed 20000 1190400:60000 1497600:64000 1728000:77000 1958400:84000 2265600:130000 -> 20000 1190400:60000 1728000:68000 1958400:79000 2265600:110000
- external storage read-ahead from 512 -> 2048 (because I've gone from a 8GB to a 32 GB SDCard, ADJUST YOURS ACCORDINGLY TO https://androidmodguide.blogspot.com/p/io-schedulers.html)
- cleaned unused and already default values from profile
File attached on OP.
I don't use SD card so what do I do?
razor17 said:
I don't use SD card so what do I do?
Click to expand...
Click to collapse
In that case nothing is needed, the configurations related to the absent sd card will not be applied.
Ok guys. I was wondering why my device was heating a lot more these last 2 days. Turns out both Alucard and Lazyplug were accidentally activated on 081119 profile. Turn one of them off and everything will be a lot better. Sorry for that. I will upload a new profile very soon.
edit:
101118 smartpack profile:
- Turned Alucard off, accidentally activated it with Lazyplug also enabled, not good!
- Managed to go 1 point higher on freq 1497 MHz, the 2 hotplugs enabled were messing with me trying to test this change before, also 1 point lower on the idle freq 268 MHz for smoother scrolling while still staying at freq 268 while idle. And some more high load optimizations now that I only got 1 hotplug enabled as it should always be.
- target_loads from 268800:29 ... 1497600:86 1574400:5 1728000:88 1958400:90 2265600:95 to -> 268800:28 ... 1497600:87 1574400:5 1728000:89 1958400:91 2265600:94
- above_hispeed 20000 1190400:60000 1728000:68000 1958400:79000 2265600:110000 -> 20000 1190400:60000 1728000:74000 1958400:82000 2265600:120000
- dirty_background_ratio 15 -> 10
I will give this a try. Hope it works well...
Yeah.
You know, try it and report back. I don't see any reports, so I assume is working well for people.
Any reports are welcome.
lentm said:
I will give this a try. Hope it works well...
Click to expand...
Click to collapse
Enviado de meu SM-G900M usando o Tapatalk
justjr said:
Yeah.
You know, try it and report back. I don't see any reports, so I assume is working well for people.
Any reports are welcome.
Enviado de meu SM-G900M usando o Tapatalk
Click to expand...
Click to collapse
No problems so far...greats for daily use..scrolling smoother than default..but pubg still laggy on lower res...may i know which rom are u using?