Database Develop

Xiaomi mi 8 hard brick!

hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:

anderssx1 said:
hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:
Click to expand...
Click to collapse
Likely you have too much power coming from your usb ports, use a usb hub such as this: https://www.amazon.com/BYEASY-Porta...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Now try Mi Flash again, make sure that the lock bootloader (which is checked by default) is unchecked.
Now it should work, be sure that you are using a fastboot rom and not a recovery rom. ( a recovery rom will not work)
Make sure that it is a fast boot for your device : If you have a global device here is a link with quite a few fastboot roms :https://c.mi.com/thread-1899815-1-0.html
If you still have trouble let me know, and tell me specifically how you arrived at your brick, I helped someone with this exact issue a couple of weeks ago, and I was going to link you to that thread. But i can't find it at the moment.

I get the same error " cannot receive hello packet" with hub USB.
MY xioami mi 8 is global version, i unlock the bootloader and make a downgrade with twrp to a older version of stable rom, and when the phone start ,its all ok and login my mi account, and the phone goes down and never more boot. Always in the pc i get qualcom port (edl mode) . Sorry for my bad english.:crying:

I think i need account with EDL authorization to flash any rom. And i can't found anyone to save me..

Try https://forum.xda-developers.com/mi-8/how-to/unbrick-mi8-edl-authorized-account-t3896677

Thank you .. i try this metod but no success

About s-unlock .. anyone knows if the service is online?

anderssx1 said:
About s-unlock .. anyone knows if the service is online?
Click to expand...
Click to collapse
Maybe try this site : MOD EDIT: link removed
I dont have his name but one of the techs from this site is a frequent XDA user and supposedly legit.
In the end there is a risk of losing $12. Seems to be worth $12 to me.

I send message to this brother , and it's 40 dollars .. i'm thinking about
thanks for reply

Question Help needed. I think I bricked my phone...

I installed android 12 beta on my Mi 11 ultra. Did not like it and wanted to install global. Installed TWRP, wiped data and instead of rebooting in twrp, I tried to enter fastboot mode via adb. The phone screen turned black. Now it is not showing in ADB, not detected by Mi flash tool, not enetering fastboot mode and not entering recovery. When I connect it to computer, there is this connecting sound but soon it is followed by disconnecting sound. Not even getting the charging screen. In the device manager on Windows, there is this Qualcum HS-USB QDLoader 9008 (COM9) when the phone is connected via USB cable to PC.
Anyway to restore any firmware on it? It is a CN version, star, has bootloadder unlocked.
EDL time? Or even worse? Is it paperweight now?

EDL time I think.

Sathelp said:
EDL time I think.
Click to expand...
Click to collapse
Believe me, this is reassuring. I'm happy to settle on EDL instead of paperweight... For EDL does the phone need to be opened, back cover removed and then that magic short circuit or is there a way to get it done without opening the phone?

hellodrsoul said:
Believe me, this is reassuring. I'm happy to settle on EDL instead of paperweight... For EDL does the phone need to be opened, back cover removed and then that magic short circuit or is there a way to get it done without opening the phone?
Click to expand...
Click to collapse
Don't worry. When mine was EDL flashed the guy asked me to download a specific miflash version that he had the link for and the ROM of choice to be flashed. I connected the phone to the PC, he connected, asked me to put it in to EDL mode ( he will explain if your not sure) and done his stuff using TeamViewer with control of my desktop. Once finished, just rebooted when asked, all done.

need mi auth to flash

How do you put the phone in EDL mode?

can you get your phone on fastboot?

xNAPx said:
How do you put the phone in EDL mode?
Click to expand...
Click to collapse
Hold both vol up and down while powering up or adb, adb reboot edl or fastboot, fastboot oem edl . You will see edl drivers load on your PC.

Thank you guys for your replies. I got it fixed and now it is rocking again. If anybody faces the same issue, please see details below.
Diagnosis: EDL mode
Signs and problems: Completely dead phone. Black screen. None of the buttons or their combinations work. Volume down plus power, volume up plus power, Both volume buttons, All three buttons. None of these worked in this EDL mode. In fact, the only sign that this phone was "alive" was the Qualcomm driver showing in the device manager when the phone was connected to a PC. There was this yellow sign even on the Qualcomm driver and the official Xiaomi flash tool failed to detect the phone due to the Qualcomm driver malfunction. Got the Qualcomm driver working (the yellow sign on the driver name icon in device manager) by disabling windows driver signature check. After this the phone was detected by the official Xiaomi flash tool. When I tried to flash the official and stock CN ROM, it did not allow me and gave the error "you are not authorized to download". Took the phone to Xiaomi service, they refused as the phone was of another region. They did not know any unofficial paid solution. Took it to local technicians. They tried but failed (ultimate multi-tool, some other tool they called as "aqua" did not work.
Treatment: Searched online and found a YouTube channel (
). Paid USD 35 and got it flashed via TeamViewer. I just sat anxiously (praying that he must not be a scammer...). He did some magic and successfully flashed the phone with the original CN ROM with the boot loader unlocked. I then was able to install the global version via fastboot as usual.
Thanks again for the free support I got here. Obliged and stay blessed

hellodrsoul said:
Thank you guys for your replies. I got it fixed and now it is rocking again. If anybody faces the same issue, please see details below.
Diagnosis: EDL mode
Signs and problems: Completely dead phone. Black screen. None of the buttons or their combinations work. Volume down plus power, volume up plus power, Both volume buttons, All three buttons. None of these worked in this EDL mode. In fact, the only sign that this phone was "alive" was the Qualcomm driver showing in the device manager when the phone was connected to a PC. There was this yellow sign even on the Qualcomm driver and the official Xiaomi flash tool failed to detect the phone due to the Qualcomm driver malfunction. Got the Qualcomm driver working (the yellow sign on the driver name icon in device manager) by disabling windows driver signature check. After this the phone was detected by the official Xiaomi flash tool. When I tried to flash the official and stock CN ROM, it did not allow me and gave the error "you are not authorized to download". Took the phone to Xiaomi service, they refused as the phone was of another region. They did not know any unofficial paid solution. Took it to local technicians. They tried but failed (ultimate multi-tool, some other tool they called as "aqua" did not work.
Treatment: Searched online and found a YouTube channel (
). Paid USD 35 and got it flashed via TeamViewer. I just sat anxiously (praying that he must not be a scammer...). He did some magic and successfully flashed the phone with the original CN ROM with the boot loader unlocked. I then was able to install the global version via fastboot as usual.
Thanks again for the free support I got here. Obliged and stay blessed
Click to expand...
Click to collapse
I tried this method today and it wasn't successful. It appeared he flashed it with his auth code, but it still doesn't power on. I'm so bummed because DHL won't touch the phone for less than $151 (risk of it being sent back) because seller wants me to lie and say it's a gamepad when DHL has precautions on phones being sent back, etc. requiring importer certificates.
My phone was acting strange on 3rd day: wasn't detecting charging USB cable overnight, would only charge wirelessly. I manually rebooted a bunch of times, then it detected the USB charging and would charge. About that time I updated to Miui 13 OTA update (Chinese /EN Rom) and noticed it was rebooting randomly in my pocket asking for PIN (not getting notifications) . Again got no USB charging through cable.
I was doing a bunch of vol up/down and Power and rebooted into safe mood. Rebooted again after things were 'ok' and little while later, the phone was OFF and never came back on again.
Did I put it into EDL and brick it this way? I Never flashed anything through USB until I tried the 35eur paid service dude.

Happy to see that is being fixed.

Wish it had fixed mine. Unfortunately, it didn't . Was refunded

Problem with flashing xiaomi mi a2 in edl mode

I got bricked my xiaomi mi a2, unscrewed it and went into edl mode. When i connect it into computer, it identifies phone like storage device and mi flash tool cannot flash it because of "error: flash timeout". How can i solve it? Maybe i ve installed wrong drivers? (sory for bed inglesh)

have you installed qualcom drivers ??
of not first install the qualcom drivers then try.

Question What to do if my mi11 is bricked ?

Hi,
Trying to install a ROM with fastboot (xiaomi 12.5.7.0) it seems something went wrong during the process.
So once the flash was done, device tried to reboot. All I got is a bleck screen with nothing happening.
Device is of course not detected by computer.
And of course nothing happens when I press the buttons.
Any idea or trick to help me out of this mess ?
Regards.
FRED

Here's some additional info :
if the device is hooked up to Windows, Windows plays a sound when it is hooked up.
And if I pressed the power button long enough, Windows plays like "on sound" and after some seconds a "off" sound.
So it does something...

Unbrick Xiaomi using miflash | Authorization EDL flash Xiaomi | Authorized Account
Unbrick Xiaomi using miflash | Authorization EDL flash Xiaomi | Authorized Account DOWNLOAD MODIFIED MIFLASH AND Qualcomm HS-USB QDLoader 9008 DRIVER The following actions : 1) Connect phone to pc in EDL mode 2) Open Miflash and specify the path to the firmware 3) Click on flash 4) A window...
xiaomi.eu
try this

Asus Rog 3 Bricked Sahara error while Flashing raw stock

Hi i got an ASUS ROG 3 I003DD ZS661KS - 6A017CN TENCENT edition bricked while updating any solution? I tried everything from computer but not opening at all, screen total black and no recovery mode starts,
Any help is appreciated

what is the device showing identified as under device manager when plugged in from the side port?

Nothing black screen, i tried up down button and power but nothing, few days ago recovery mode worked now nothing.. i tried to look some programm for force boot the phone through pc but all websites link are empty, I don’t know what to do.. i was updating the phone then this happened..

Get the device in EDL mode with working Qualcom drivers and a good connection to your pc. Then follow below guide, all needed looks to be there. You can get the device in EDL mode with a flash cable that you can buy cheap or make one yourself from a USB cable - there are guides online for doing that too.
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com

I connected the phone with EDL cable the computer recognize as Qualcom device etc.. but

i tried to flash the raw stock firmware trough pc and EDL cable but nothing says Sahara error mode while the process