Hello Everyone
i want to change my csc region fro XSG to another region like XID or XXV because i need native call recorder.
i try to flash XXV Last Firmware but , because of multi CSC support dosent Change , i need a way to change CSC File and flash it.
Thank your for helping me.
Try Samkey:
https://www.reddit.com/r/Galaxy_S20/comments/jroowl
Related
Hi all! how to change csc with PIE?
now i have N960FTIM2CSA2 and want ITV
Hello all,
I have an S20 FE 5G G781B running the THL CSC, December patch One UI 3.0 (changed from XSA which was original). I'm wondering how do I go about changing the multi CSC to one of the OXM CSCs? I have read it can be done using the combination ROM and at the moment this is possible since the bootloader version is still U1, same as the combo ROM. Does anyone know the exact process to go through to change from OLM to OXM? Thanks
FedoraMaster420 said:
Hello all,
I have an S20 FE 5G G781B running the THL CSC, December patch One UI 3.0 (changed from XSA which was original). I'm wondering how do I go about changing the multi CSC to one of the OXM CSCs? I have read it can be done using the combination ROM and at the moment this is possible since the bootloader version is still U1, same as the combo ROM. Does anyone know the exact process to go through to change from OLM to OXM? Thanks
Click to expand...
Click to collapse
I have also two G781Bs, these are PHE and ATL.
OXM from G781BOXM2CUB5 includes these CSCs:
BTB
BTE
EVR
MEO
SFR
single/EUX
single/3IE
single/AMO
single/ATL
single/ATO
single/BOG
single/BTU
single/CNX
single/CPW
single/DBT
single/EUR
single/FTM
single/H3G
single/ITV
single/LUX
single/MET
single/MOT
single/NEE
single/O2C
single/O2U
single/OPV
single/ORO
single/PHE
single/PHN
single/PLS
single/PRT
single/ROM
single/SEB
single/SIO
single/SWC
single/TCL
single/TPH
single/VD2
single/VDF
single/VDI
single/VOD
single/XEC
single/XEF
single/XEO
single/XEZ
single/EUY
single/AUT
single/BRI
It does not include THL CSC. THL is included only on OLM firmwares (for example G781BXXU1BUA5_G781BOLM1BTL8_THL).
I think none of these OXM CSCs includes call recording
OLM from G781BOLM1BTL8 includes these CSCs:
single/XME
single/THL
single/XSP
single/MM1
single/SIN
single/STH
single/ATS
single/XSA
single/TEL
single/OPS
single/VAU
THL is not included on the OXM firmwares from S20 FE5G, and I don't know what will happen if you change firmware to OXM.... if you change it please, post results here.
And if you can answer me a question please do it: THL has native call recording on S20FE5G?
Thanks in advance.
Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?
vegetaleb said:
Hello
If I want to change my CSC (MID) to another one let's say the UAE one, can I simply flash Home CSC in Odin?
If yes should I follow the same step as flashing an entire FW ?
And can I find the Home CSC alone or I have to download the full FW Zip?
Click to expand...
Click to collapse
HOME_CSC does not change the CSC code, you would use the other CSC firmware file.
However, mixing firmware files from different versions or regions is not advisable.
Sadly and to the best of my knowlege it is no longer possible to change CSC using ODIN & flashing just a stock Samung FW pack.
You need to buy credits and use an online service (Samkey?) to change CSC on Samsung phones now.
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?
Mike Ng said:
Hi just out of curious what about other apps like your banking and transportation will there be any serious side effects after you have change the CSC?
Click to expand...
Click to collapse
All work like before the change.
manager77 said:
All work like before the change.
Click to expand...
Click to collapse
Oh that good thanks for your reply.. I may do it on my set. Been looking for answers able to do this changing the CSC file.
Once again thank you.
manager77 said:
I've changed CSC from VOD (uk) to XID (Indonesia, for native call recording) with Odin without wipe anything. I only flashed stock XID firmware with home_csc and it works without Samkey
Click to expand...
Click to collapse
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/
mirecc21 said:
How you do it ??? I´m on XEZ CSC and it´from Multi CSC OXM. I can´t change it to my ORS (Orange) ??? ORS is from Multi OXM too :/
Click to expand...
Click to collapse
Xid is not from multi csc, it's single csc.
But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239
android-utelias said:
But how about to change first to to XID and then to the wanted CSC Region ?
Refer: https://forum.xda-developers.com/t/...mware-sm-g998b-27th-jan.4218529/post-84367239
Click to expand...
Click to collapse
Yes it will work I think. I changed with DBT to XID and today I flash DBT back and I have DBT. So I think different countries should change as follows. And I don't have to use samkey
i have downloaded a full firmware for my s20 plus 5g Korean version, and i also downloaded the full firmware of s20 plus from the Philippines. i want to change my csc to Philippines using Odin. should i check all the file inside the s20 plus firmware from the philippines or just the CSC file only? then the rest is from my s20 plus 5g firmware file
hello I tried to change the CSC on my Samsung so that I could record calls, my original CSC was xeo Poland. after uploading CSC from Israel, TUR / TUR TUR / TUR appeared but this is not CSC from Israel but from Turkey ... why? When I tried to go back to xeo, now CSC: TUR / TUR, TUR / EUX / XEO .... wtf
same here...
I have Galaxy S20 FE 5G SM-G781B It came with Android 11 INS (India) CSC Region Code.
I've Tried to flash the ILO (Israel) ROM, but It seems to be that the CSC Region Code changed to XSG (United Arab Emirates). How to change the CSC to ILO?
Cherizli said:
same here...
I have Galaxy S20 FE 5G SM-G781B It came with Android 11 INS (India) CSC Region Code.
I've Tried to flash the ILO (Israel) ROM, but It seems to be that the CSC Region Code changed to XSG (United Arab Emirates). How to change the CSC to ILO?
Click to expand...
Click to collapse
are you trying to get call recording?
jasim.mohd said:
are you trying to get call recording?
Click to expand...
Click to collapse
U have a solution
yeah flash only the HOME CSC file from the India region, make sure firmware version is the same
If you're trying to get call recording, flash Indonesian CSC (XID), it did work on my XEO phone just fine.
Hi everyone,
I recently bought a Galaxy S20 FE 4G (SM-G780G) in Switzerland. As I am living in France, I inserted my french SIM card, but the phone is still displaying AUT / AUT, AUT / EUY / AUT.
The CSC is AUT (included in EUY group), but I would like to change CSC to XEF (included in EUX group).
It is not really clear for me if this is possible (with Samkey) as the two CSC's are not in the same group. The phone should of course still work 100% after the change and warranty should stay valid.
Thanks in advance for your help.
Yeah you can do that.
Android 12 should roll out soon in our region.. I'm from Germany and use Malaysian firmware, when I flashed I did so without selecting any csc in Odin. And it automatically installed the one I needed I think.
But it will factory reset your phone.
I also installed XME to get Android 12 first. I noticed a worse overall performance though. Are Android 12 ROM running significantly cooler than Android 11 since thermal throttling seems to be an issue to every S20 FE user..? Any CSC that might perform better in this area since some CSCs have regional difference like SER from Russia comes without Bixby?
kembser said:
Hi everyone,
I recently bought a Galaxy S20 FE 4G (SM-G780G) in Switzerland. As I am living in France, I inserted my french SIM card, but the phone is still displaying AUT / AUT, AUT / EUY / AUT.
The CSC is AUT (included in EUY group), but I would like to change CSC to XEF (included in EUX group).
It is not really clear for me if this is possible (with Samkey) as the two CSC's are not in the same group. The phone should of course still work 100% after the change and warranty should stay valid.
Thanks in advance for your help.
Click to expand...
Click to collapse
before you pay out money (I've heard that Samkey told one user our device wasn't supported) maybe the method outlined in this thread is worth a try, but using the pit file from XEF
How to change CSC back to original if you are not able to
So i have a S20Fe exynos and me being impatient installed oneui4 SER version on device thinking that will see whatever happens. I am also developer of Clean OS rom for s20fe so i tried using my csc feature script and it worked flawlessly in SER...
forum.xda-developers.com
if it doesn't work fully then the same method should be able to return it to AUT if needed.
curious how it works out if you do try it.
Do you guys know what countries uses EUY and EUX?
I've got a new phone and i like to use AUT ROMs but so far all we have are EUY and EUX, not AUT