Database Develop

Help please! my phone does not pass the screen of AT&T HEEEEELP!!!!!

Hello this is my first post and I'm desperedo! Today ICS install a ROM http://forum.xda-developers.com/showthread.php?t=1362092
I had the Factory ROM 2.2.1 and had no problems when installing the ICS, then I realized that HD games and thought I shut him a backup but this failed, I gave up and as I was in a ClockWordMod format (wipe) after the phone reboots, the phone is on the screen I have AT&T and I can not access the download mode, and only took 1 week for me to buy it from Amazon.com and I'm crying. Looking on Youtube I found a video of what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PS: My phone came with a factory default, the button off and on always gets stuck and just what I put the battery is turned on at once. Someone please help me to solve this Bootloop.
This text was translated with Google Translate
---------------------------
Hola este es mi primer post y ando desperedo!! Hoy instale una ROM ICS http://forum.xda-developers.com/showthread.php?t=1362092
Yo tenia la ROM de Fabrica 2.2.1 y no tenia problemas cuando instale la ICS, despues me di cuenta que los juegos HD se me cerraban y pense hacerle un Backup pero este fallaba, me di por vencido y como estaba en el ClockWordMod hice un formateo (wipe) despues reincie el telefono, el telefono se me queda en la pantalla de AT&T y no puedo acceder al modo descarga, y apenas llevo 1 semana de que me lo compre por Amazon.com y estoy llorando. Buscando en Youtube me encontré con un video de lo que me está pasando http://www.youtube.com/watch?v=betzMPoTD68
PD: Mi telefono vino con un defecto de fabrica, el boton de apagar y prender se queda siempre pegado y apenas a lo que le pongo la bateria este prende de una vez. Alguien que me ayude porfavor para solucionar este Bootloop.
Este texto fue traducido con el Traductor de google

ManuelZRO said:
Hello this is my first post and I'm desperedo! Today ICS install a ROM http://forum.xda-developers.com/showthread.php?t=1362092
I had the Factory ROM 2.2.1 and had no problems when installing the ICS, then I realized that HD games and thought I shut him a backup but this failed, I gave up and as I was in a ClockWordMod format (wipe) after the phone reboots, the phone is on the screen I have AT&T and I can not access the download mode, and only took 1 week for me to buy it from Amazon.com and I'm crying. Looking on Youtube I found a video of what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PS: My phone came with a factory default, the button off and on always gets stuck and just what I put the battery is turned on at once. Someone please help me to solve this Bootloop.
This text was translated with Google Translate
---------------------------
Hola este es mi primer post y ando desperedo!! Hoy instale una ROM ICS http://forum.xda-developers.com/showthread.php?t=1362092
Yo tenia la ROM de Fabrica 2.2.1 y no tenia problemas cuando instale la ICS, despues me di cuenta que los juegos HD se me cerraban y pense hacerle un Backup pero este fallaba, me di por vencido y como estaba en el ClockWordMod hice un formateo (wipe) despues reincie el telefono, el telefono se me queda en la pantalla de AT&T y no puedo acceder al modo descarga, y apenas llevo 1 semana de que me lo compre por Amazon.com y estoy llorando. Buscando en Youtube me encontré con un video de lo que me está pasando http://www.youtube.com/watch?v=betzMPoTD68
PD: Mi telefono vino con un defecto de fabrica, el boton de apagar y prender se queda siempre pegado y apenas a lo que le pongo la bateria este prende de una vez. Alguien que me ayude porfavor para solucionar este Bootloop.
Este texto fue traducido con el Traductor de google
Click to expand...
Click to collapse
Disconnect your phone from your computer if it's connected and take out the battery. Hold the volume up and down keys, connect your phone to your computer while doing this, and then insert your battery while still holding down volume up and down. This might get you into download mode.

help
1.Disconnect your phone from your computer if it's connected
2.take out the battery
3.Hold the volume up and down keys, connect your phone to your computer while doing this
4.then insert your battery while still holding down volume up and down. This might get you into download mode.
te estoy ttraduciendo lo que puso el miembro sthodupunuri en la descripcion
1.descocecta el telefono de la computadora (si se encuentra conectado)y quita la batteria.
2.presiona los botones del volume arriva-abajo al mismo tiempo(no los sueltes)
3.conecta el usb cable y insierta la bateria eso te pondra en download mode
mucha suerte si nesecitas mas ayuda reply a este mensage

chicanowpride said:
te estoy ttraduciendo lo que puso el miembro sthodupunuri en la descripcion
1.descocecta el telefono de la computadora (si se encuentra conectado)y quita la batteria.
2.presiona los botones del volume arriva-abajo al mismo tiempo(no los sueltes)
3.conecta el usb cable y insierta la bateria eso te pondra en download mode
mucha suerte si nesecitas mas ayuda reply a este mensage
Click to expand...
Click to collapse
Per forum rules please translate this to english and post in your original post alongside the spanish version.

Nothing happened, so no access to the download, it's the same as in the video where you try to access the recovery mode, but this one is like the circle loading and off the screen and turns on again. I'm thinking the USB JIG solution but I have the problem that the phone is turned on you just put the battery and I doubt that I may have the USB method JIG
This text was translated with GoogleTranslate
----------------------------------------------------------------------
No ha pasado nada, no accede al modo descarga, pasa lo mismo como en el video en donde se intenta acceder al modo recovery, pero este se queda como el circulo cargando y se apaga la pantalla y se prende otra vez. Ando pensando en la solucion del USB JIG pero tengo el problema de que el telefono se prende apenas le pongo la bateria y dudo que me sirva el metodo del USB JIG

ManuelZRO said:
Nothing happened, so no access to the download, it's the same as in the video where you try to access the recovery mode, but this one is like the circle loading and off the screen and turns on again. I'm thinking the USB JIG solution but I have the problem that the phone is turned on you just put the battery and I doubt that I may have the USB method JIG
This text was translated with GoogleTranslate
----------------------------------------------------------------------
No ha pasado nada, no accede al modo descarga, pasa lo mismo como en el video en donde se intenta acceder al modo recovery, pero este se queda como el circulo cargando y se apaga la pantalla y se prende otra vez. Ando pensando en la solucion del USB JIG pero tengo el problema de que el telefono se prende apenas le pongo la bateria y dudo que me sirva el metodo del USB JIG
Click to expand...
Click to collapse
Can you try getting into recovery mode? Take the battery out, hold down volume up and volume down buttons. Then put the battery in while still holding the buttons down. Keep holding the buttons until the phone boots into recovery. From there, install a gingerbread rom. An ICS rom will not install with froyo bootloaders.

http://forum.xda-developers.com/show....php?t=1530886
My phone is in a bootload yesterday and found a method, which is with the ADB and Android SDK, I followed a guide I found in Spanish in HTCMania and also a video on YouTube in English, here are the video: http://www.youtube.com/watch?v=oaNM-...layer_embedded
I followed all the steps but at the time to put "adb reboot recovery" tells me "device not found"
IMAGE:
http://img849.imageshack.us/img849/3182/dibujorhx.png
We thank some kind of help please, here is a video that i found in Youtube that shows exactly what is happening to me http://www.youtube.com/watch?v=betzMPoTD68
PD: My phone when you buy it, came with a manufacturing defect, the power button on / off is stuck inside and when the battery put the phone on immediately, as a result of this I can not use the USB method JIG.
This text was translated with GoogleTranslate
-----------------------------------------------------
No puedo entrar al modo recovery ni nada he intentado lo que han dicho y nada.
Investigando en internet consegui un metodo para iniciar el recovery con ADB. Segui los pasos de esta guia
Pero en el momento de poner adb reboot recovery, dice: device not found, intenté instalar los drivers USB otra vez pero no sucede nada no me reconoce el telefono. ¿No sera por la ROM ICS que no me quiere reconocer el telefono?[/QUOTE]
-----------------------------------------------------
No puedo entrar al modo recovery ni nada he intentado lo que han dicho y nada.
Investigando en internet consegui un metodo para iniciar el recovery con ADB. Segui los pasos de esta guia
Pero en el momento de poner adb reboot recovery, dice: device not found, intenté instalar los drivers USB otra vez pero no sucede nada no me reconoce el telefono. ¿No sera por la ROM ICS que no me quiere reconocer el telefono?

ManuelZRO said:
I send a private message with full message links do not let me post
I can not enter recovery mode and nothing I tried what you said and nothing.
Researching on the internet I got a method to start the recovery with ADB.
But just to put adb reboot recovery, says: device not found, I tried to install the USB drivers again but nothing happens I do not recognize the phone. Do not be the ICS ROM that I want to recognize the phone?
Click to expand...
Click to collapse
Did you try the 2 button combo? volume up + power button? also did you try changing your drivers from the captivate drivers to say the Galaxy Nexus drivers or the Google drivers? I know that fixed mine a while back

http://forum.xda-developers.com/showthread.php?t=1530886
If I tried to enter the recovery and the download and nothing, as my phone has the button On / Off stuck inside, so when I connect the battery the phone is turned away, just makes me fata press volume buttons and connect the battery to see if it comes to recovery, but not entered, the phone lights up the screen at & t and then goes black screen and returns to the screen at & t and so on, I'm trying with the SDK Manager but I have not solve the problem, I read this guide HTCMania forum http://www.htcmania.com/showthread.php?t=337069, this same guide is also on Youtube http://www.youtube.com/watch?v=betzMPoTD68&feature=related
The problem is I do not recognize the device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By manuelzro at 2012-03-05
Reinstall the drivers, install the drivers of Google and nothing happens, even when I connect the phone to USB and the PC does not recognize me the phone, I do not chip or a notice, nothing, something like "device is detected" or a signal, nothing, I'm really desperate any help would be appreciated.
This text was translated with Google Translate
---------------------------------------------------------
Si, intenté entrar al recovery y el Download y nada, como mi telefono tiene el boton On/Off pegado por dentro, y por eso cuando conecto la bateria el telefono se enciende inmediatamente, solo me hace fata presionar los botones de volume y conectar la bateria para ver si entra al recovery, pero no entra, el telefono enciende con la pantalla de at&t y luego se pone la pantalla en negro y vuelve a la pantalla de at&t y asi sucesivamente, ahora estoy intentando con el SDK Manager pero no he conseguido solucionar el problema, lei esta guia en el foro de HTCMania http://www.htcmania.com/showthread.php?t=337069, esta misma guia esta en Youtube tambien http://www.youtube.com/watch?v=betzMPoTD68&feature=related
El problema es que no me reconoce el dispositivo
By manuelzro at 2012-03-05
Reinstale los drivers, instale los drivers de Google y no sucede nada, e incluso cuando conecto el telfono al USB y la PC no me reconoce el telefono, no me salta ni una notificacion, nada, algo asi "Se ha detectado un dispositivo" ni una señal, nada, ando desesperado cualquier ayuda seria realmente apreciada

Have you tried a different cable? Or maybe even another computer? I've read quite a few posts here on XDA that the Samsung USB cable doesn't work with some computers or the computer itself is the problem..
[edit]
I noticed you're using
C:\android-sdk>
try using C:\Users\Yourcompuernamehere (the name you used for your computer ) >
Start -> All Programs -> Accessories -> Command Prompt
It might be trying to find your phone via an emulator or something?

For now I have not tried connecting the phone to another computer, another will try tomorrow to see if at least recognizes the phone.

did u try the USB jig to force it in to Dwd mode ? or there is another method
http://www.youtube.com/watch?v=Rdn5GoRjhn0
bbut i am not sure it will work in ur captivate. I had some problems , but another friend had no issues in this.....

I mean, my phone has the button On / Off stuck, so I can not use the USB method JIG because the battery just put the phone on immediately, the solution would be to repair the button On / Off in my area but I doubt they have support Android, much less this phone is not sold in my country, in addition to the telephony market in my country is invaded by Blackberry (4 of 5 people have a Blackberry). The USB JIG MercadoLibre.com sell it on but I need repair first button on / off
This text was translated with Google Translate

I just tried another USB cable but the PC does not recognize me the phone yet, I'm hoping that me will bring a laptop to see if it recognizes the phone.
The translations are considered google translator? No great confidence in this translator

As I posted in your other thread, the only thing I can suggest is trying the Nexus S drivers since your phone cannot be recognized.

I have the exact same Issue! My power button it's stuck so every time I put the battery the phone power on by itself... But I know the cause of my issue... I had a bootloop so on CWM I formated /boot later I discover that "/boot" is for bootloader and no for the ROM. So I'm stuck as you!
I don't think the correct drivers will work, because you need to be on download mode for that. I CAN'T get there. ANY HELP!?
BTW: I speak spanish PM if you found a solution.

Have you tried holding the vol up + vol down buttons while plugging in the phone? Or even volume down + power button(you say its stuck so no need to press it) while plugging in the phone?

cOld1 said:
Have you tried holding the vol up + vol down buttons while plugging in the phone? Or even volume down + power button(you say its stuck so no need to press it) while plugging in the phone?
Click to expand...
Click to collapse
Yes I tried that... But I get stuck either on ATT Screen or in the "loading battery charge logo" << just the circle not the battery logo itself, and if I pressed UP and DOWN it get stuck on a bootloop. ATT screen >> Black screen >> Att screen ... etc.

ADB or the jig method? One of those 2 has to work..

Teclast X98 Pro Install WINDOWS 10 – NO "winpe" windows 10 – No USB WINPE need

Teclast X98 Pro Install WINDOWS 10 – NO "winpe" windows 10 – No USB WINPE need
SOLO PARA DEJAR ÚNICAMENTE WINDOWS
SI QUIERES CONSERVAR ANDROID BORRA SOLO LA PARTICION DEL SISTEMA DE WINDOWS.
NO ME RESPONSABILIZO DE ANDROID, ESTO ES SOLO PARA QUIENES QUIEREN SOLO WINDOWS
ONLY FOR LEAVING WINDOWS ONLY
IF YOU WANT TO KEEP ANDROID ERASE ONLY THE PARTITION OF THE WINDOWS SYSTEM.
I DO NOT RESPOND TO ANDROID, THIS IS ONLY FOR THOSE WHO WANT ONLY WINDOWS. ​
Spanish​
PUES ESO, NO es necesario llamar "winpe" a la unidad de windows para instalar limpio.
Conecta un HUD usb para un usb pendrive, un ratón y un teclado.
Inicia el tablet y presiona "supr" para entrar en la bios.
Presiona "f3" para restaurar los valores por defecto, luego muévete hasta la foto y ponlo en DISABLED para que NO salga el logo de la bios y salga el de la placa American Megatrends, guardas y sales, así VEIS el cuando pulsáis el selector de boot o si entráis a la bios.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
He bajado de windows la herramienta de instalación de usb windows 10,
https://www.microsoft.com/en-us/software-download/windows10 direct link http://go.microsoft.com/fwlink/?LinkId=691209
he seleccionado que lo voy a instalar en un dispositivo distinto al de mi pc de sobremesa y me ha formateado un usb de 16gb con windows 10 y ese lo puedo instalar en cualquier pc AL IGUAL que en la tablet.
En el logo de American Megatrends SOLO necesitas dar a "f7" al inicio y ahí saldrá la opción de unidad de arranque, elegís la del USB con el hub para el teclado y el ratón. y como si de un pc se tratase, ELIMINÁIS todas las unidades de HDD y os quedara una de casi 60gb, le dais a continuar y arreando, a esperar.
Despues CON OTRO USB ya en windows, ejecutáis el bat de la instalación de los drivers y después ya tendréis el tablet listo y con sus drivers perfectamente funcionales.
y con 40 gb hd casi libres ;D
Y ya esta activado claro, al tener una id ya usado en win10 lo detecta y si no lo activa la tablet( por su id) ya se activa al haberlo sacado de tu pc activado a un usb.
NO ES NECESARIO HACER NADA, ARRANCARA EN WINDOWS.
Archivos en mi cuenta Drive
Drivers Pack
https://drive.google.com/open?id=0B9yAk26cMKdwcGF3aldGM3FldXM
Drivers Camaras
https://drive.google.com/open?id=0B9yAk26cMKdwTTI5d1lLSTZTRWs
https://drive.google.com/open?id=0B9yAk26cMKdwSmZwM2t2VzlvS2s
Saludos
English​
THEN, you do not need to call the windows drive "winpe" to install clean.
Connect a usb HUD for a usb pendrive, a mouse and a keyboard.
Start the tablet and press "supr" to enter the bios.
Press "f3" to restore the defaults, then move to the photo and put it in DISABLED so that it does NOT leave the logo of the bios and leave the one of the plate American Megatrends, save and exit, thus YOU SEE when you press the selector of boot or if you enter to The bios.
I downloaded windows installation tool usb windows 10,
https://www.microsoft.com/en-us/software-download/windows10 direct link http://go.microsoft.com/fwlink/?LinkId=691209
I have selected that I will install it on a device other than my desktop PC and I have formatted a usb of 16gb with windows 10 and that I can install it on any pc ALONG the tablet.
Power on, on American Megatrends pic push "f7" at the beginning and there will be the boot drive option, choose the USB with the hub for the keyboard and mouse. And as if a pc was, you removed all HDD units and you get one of almost 60GB, you give it to continue and harnessing, to wait.
Then WITH ANOTHER USB already in windows, execute the bat of the installation of the drivers and then you will have the tablet ready and with its perfectly functional drivers.
And with 40 gb hd almost free. D
And it is already clear of course, having an id already used in win10 detects it and if it does not activate the tablet (by its id) is already activated after having taken it from your pc activated to a usb.
IT IS NOT NECESSARY TO DO ANYTHING, IT WILL START IN WINDOWS.
Archives on my acount Drive
Drivers Pack
https://drive.google.com/open?id=0B9yAk26cMKdwcGF3aldGM3FldXM
Camera Drivers
https://drive.google.com/open?id=0B9yAk26cMKdwTTI5d1lLSTZTRWs
https://drive.google.com/open?id=0B9yAk26cMKdwSmZwM2t2VzlvS2s
regards

Buenos días, en la opción del boot no me aparece USB, no puedo seleccionarlo, solo aparece UEFI OS, Windows boot manager y disabled, qué puedo hacer?, gracias.

Thank you, you are a genius! My tablet has dual boot again (I installed it next to android, not instead)

Nougat on N920G

I've tried upgrading to Nougat with the Bangladesh firmware via Odin. Whenever I try, the following error appears:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, I turn on the N920G and it asks me to try to recover the mobile with Smart Switch (and it does not work). I can only use it by flashing Marshmallow again.
Any solution?

I happen exactly the same, probe to install the nougat India version and always the same error, I have the 920G, I am from Argentina.
As far as I read the 920G latin america would not be compatible with this version ....
regards

superchizo said:
I happen exactly the same, probe to install the nougat India version and always the same error, I have the 920G, I am from Argentina.
As far as I read the 920G latin america would not be compatible with this version ....
regards
Click to expand...
Click to collapse
Yo también soy de Argentina. En el foro de Sammobile, uno de los moderadores me dijo que al parecer hace falta flashear el firmware junto con el PIT, pero no me da mucha confianza hacerlo y no lo veo necesario para actualizar a Nougat
---
I'm from Argentina, too. In the Sammobile forum, one of the moderators told me that I seem to need to flash the firmware together with the PIT, but it does not give me much confidence to do so and I do not see it necessary to upgrade to Nougat

axelitooavila said:
Yo también soy de Argentina. En el foro de Sammobile, uno de los moderadores me dijo que al parecer hace falta flashear el firmware junto con el PIT, pero no me da mucha confianza hacerlo y no lo veo necesario para actualizar a Nougat
Click to expand...
Click to collapse
estoy de acuerdo, no creo que se justifique probar instalando un PIT, tiene que haber otra solución, no entiendo por que no funciona si es el mismo modelo, la primera vez que me pasa algo asi.
También probé de instalar la 6.0.1 India y después hacer el upgrade por OTA, pero tampoco funciono, me dio el mismo error que al tratar de instalar la nougat directamente, asi que no creo que instalando el PIT funcione.
Si te enteras de alguna forma de realizar el upgrade avisame, me mata la ansiedad.... ejejejeje.
Saludos,
I agree, I do not think it is justified to try installing a PIT, there has to be another solution, I do not understand why it does not work if it is the same model, the first time something like that happens to me.
I also tried to install 6.0.1 India and then upgrade to OTA, but it did not work either, it gave me the same error as when trying to install nougat directly, so I do not think installing PIT works.
If you find out some way to do the upgrade, let me know, it kills my anxiety .... ejaculation.
Regards,

superchizo said:
I happen exactly the same, probe to install the nougat India version and always the same error, I have the 920G, I am from Argentina.
As far as I read the 920G latin america would not be compatible with this version ....
regards
Click to expand...
Click to collapse
superchizo said:
estoy de acuerdo, no creo que se justifique probar instalando un PIT, tiene que haber otra solución, no entiendo por que no funciona si es el mismo modelo, la primera vez que me pasa algo asi.
También probé de instalar la 6.0.1 India y después hacer el upgrade por OTA, pero tampoco funciono, me dio el mismo error que al tratar de instalar la nougat directamente, asi que no creo que instalando el PIT funcione.
Si te enteras de alguna forma de realizar el upgrade avisame, me mata la ansiedad.... ejejejeje.
Saludos,
I agree, I do not think it is justified to try installing a PIT, there has to be another solution, I do not understand why it does not work if it is the same model, the first time something like that happens to me.
I also tried to install 6.0.1 India and then upgrade to OTA, but it did not work either, it gave me the same error as when trying to install nougat directly, so I do not think installing PIT works.
If you find out some way to do the upgrade, let me know, it kills my anxiety .... ejaculation.
Regards,
Click to expand...
Click to collapse
Solo queda esperar y ver si hay una solución
---
Just wait and see if there is a solution

Trataron abriendo en el Note la opcion de desarrollador y desbloqueando el USB Debugging?
Have u tried enabling developer options, and USB debugging?

Ferxcito said:
Trataron abriendo en el Note la opcion de desarrollador y desbloqueando el USB Debugging?
Have u tried enabling developer options, and USB debugging?
Click to expand...
Click to collapse
por lo menos yo lo probe y no funciono,
Desbloqueo de OEM y depuracion de USB, me arroja el mismo error.
--
At least I tried it and it did not work,
Unlock OEM and USB debugging, I throw the same error.

superchizo said:
por lo menos yo lo probe y no funciono,
Desbloqueo de OEM y depuracion de USB, me arroja el mismo error.
--
At least I tried it and it did not work,
Unlock OEM and USB debugging, I throw the same error.
Click to expand...
Click to collapse
Then we are lost =(
On the same post and video they said that u need to open or unblock the Bootloader with some kind of command.
Im unnable to do it atm.

axelitooavila said:
I've tried upgrading to Nougat with the Bangladesh firmware via Odin. Whenever I try, the following error appears:
After that, I turn on the N920G and it asks me to try to recover the mobile with Smart Switch (and it does not work). I can only use it by flashing Marshmallow again.
Any solution?
Click to expand...
Click to collapse
Did you try downloading the firmware from this software? (https://www.androidsage.com/2016/03...firmware-files-directly-from-samsung-servers/)
It seems your firmware is corrupt while downloading. Try to Flash it again.

If you read changelog you can see
1.md5 checking finished successfully
This means download is not corrupt. When you flash any file ending with .md5 with odin, it never flash if file is corrupted and will throw error - md5 mismatched, flashing aborted.
2.Bootloader,kernel and recovery flashed successfully
Usually bootloader samsung makes blacklisted for some device and that can fail but here that is not the case as it was already flashed accoeding odin log
3.Flashing failed at system.img
Common cause is sometimes system.img size varies on different regional model though model is same. So in case you are flashing a Bangladesh ROM on on other region device it can fail
Flashing with pit (must be from same region you are trying to flash ROM) will change partition size and that may able to finish system.img in case said is the reason. Keep in mind flashing md5 should be keep reserve only to revive device in case of soft brick
Recommend
- Flash ROM from same region of device
- Flash with pit in case of device and ROM are from same region and still giving error.

It does not recognize SIM CARD after flashing

Buenas tardes amigos, acabo de flashear SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC para limpiar mi equipo, cosa que ya habia hecho antes, pero esta vez no puedo tener acceso a mi simcard, estoy muy asustado no se que hacer, que me recomiendan para solucionar eso, he puesto varias simcard y ninguna la reconoce, la aplicacion de llamada se cierra al intentar marcar cualquier llamada o comando, probe con *#06# y sigue dañado, por favor necesito ayuda
Traslate:
Good afternoon friends, I just flashed SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC to clean my computer, which I had done before, but this time I can not access my simcard, I'm very scared I do not know what to do, they recommend me to solve that, I have put several simcards and none recognizes it, the call application closes when trying to dial any call or command, probe with * # 06 # and it is still damaged, please I need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DragonNike said:
Buenas tardes amigos, acabo de flashear SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC para limpiar mi equipo, cosa que ya habia hecho antes, pero esta vez no puedo tener acceso a mi simcard, estoy muy asustado no se que hacer, que me recomiendan para solucionar eso, he puesto varias simcard y ninguna la reconoce, la aplicacion de llamada se cierra al intentar marcar cualquier llamada o comando, probe con *#06# y sigue dañado, por favor necesito ayuda
Traslate:
Good afternoon friends, I just flashed SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC to clean my computer, which I had done before, but this time I can not access my simcard, I'm very scared I do not know what to do, they recommend me to solve that, I have put several simcards and none recognizes it, the call application closes when trying to dial any call or command, probe with * # 06 # and it is still damaged, please I need help
Click to expand...
Click to collapse
Have you checked your IMEi No in settings?

I can't post links, so check my post history for my recent post called "Fixed it!" in the thread "no service after 8.1 update".
That worked for me, hope it works for you too.

AaronSpain said:
I can't post links, so check my post history for my recent post called "Fixed it!" in the thread "no service after 8.1 update".
That worked for me, hope it works for you too.
Click to expand...
Click to collapse
I was going to link your post anyway, so here's a lil help:highfive:... https://forum.xda-developers.com/showpost.php?p=79854596&postcount=5

I had the same issue after reflashing the official firmware. In the end i did a quick run through of the base settings (including the WiFi connection) & after my phone booted up to the home screen i was asked to install a security update. After installing the update, and restarting my phone, the sim card was recognised.

King of England said:
I had the same issue after reflashing the official firmware. In the end i did a quick run through of the base settings (including the WiFi connection) & after my phone booted up to the home screen i was asked to install a security update. After installing the update, and restarting my phone, the sim card was recognised.
Click to expand...
Click to collapse
Esta fue la solución, instalar todas las actualizaciones de seguridad!

help spflashtool status error (0xC0010001)

hello I recently failed to install twrp and got into bootloop so i search here how to unbrick my phone and I found a solution but the spflash tool always have this error. I already did bypassbrom and successfully get the protection disabled status the only problem is when I am trying to flash the rom to my device it will always show like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kazuhiko23124 said:
hello I recently failed to install twrp and got into bootloop so i search here how to unbrick my phone and I found a solution but the spflash tool always have this error. I already did bypassbrom and successfully get the protection disabled status the only problem is when I am trying to flash the rom to my device it will always show like this
View attachment 5394419
Click to expand...
Click to collapse
Uncheck preloader and check again. Let me know, probably you are missing something more.

SubwayChamp said:
Uncheck preloader and check again. Let me know, probably you are missing something more.
Click to expand...
Click to collapse
still not working

kazuhiko23124 said:
View attachment 5394575
still not working
Click to expand...
Click to collapse
OK, you said you passed the unauthorized verification, I guess you installed the devel filters and so on.
Now you have to set the SP Flash tool in Options/General Check LIB DA match and Check Storage Life Cycle and in Connection; UART/Baud Rate to 921600

kazuhiko23124 said:
View attachment 5394575
still not working
Click to expand...
Click to collapse
Do you know you have to relaunch the bypass each time you try to use SP Flash tool and after each error too?

lobothefoots said:
Do you know you have to relaunch the bypass each time you try to use SP Flash tool and after each error too?
Click to expand...
Click to collapse
I don't know that, thank you sir

kazuhiko23124 said:
hola, recientemente no pude instalar twrp y entré en bootloop, así que busqué aquí cómo desbloquear mi teléfono y encontré una solución, pero la herramienta spflash siempre tiene este error. Ya hice bypassbrom y obtuve con éxito el estado de protección desactivada. El único problema es que cuando intento actualizar la rom a mi dispositivo, siempre se mostrará así.
kazuhiko23124 said:
no lo se gracias señor
Click to expand...
Click to collapse
kazuhiko23124 said:
hola, recientemente no pude instalar twrp y entré en bootloop, así que busqué aquí cómo desbloquear mi teléfono y encontré una solución, pero la herramienta spflash siempre tiene este error. Ya hice bypassbrom y obtuve con éxito el estado de protección desactivada. El único problema es que cuando intento actualizar la rom a mi dispositivo, siempre se mostrará así.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
y tenia el mismo problema, lo SOLUCIONE, es un problema de Driver, tus driver preloader estan desactualizado, anda al administrador de dispositivos, busca el puerto donde esta conectado el telefono y dale clic derecho y luego actualizar controlador, la Pc debe hacer el proceso de actualizarlo y luego vas a Flashtool y le das Start, listo. repito: Actualiza el Controlador o Driver

SubwayChamp said:
Desmarque el precargador y vuelva a verificar. Déjame saber, probablemente te estás perdiendo algo más.
Click to expand...
Click to collapse
HatoryHanzo said:
y tenia el mismo problema, lo SOLUCIONE, es un problema de Driver, tu driver preloader esta desactualizado, anda al administrador de dispositivos, busca el puerto donde esta conectado el telefono y dale clic derecho y luego actualizar controlador, la Pc debe hacer el proceso de actualizarlo y luego vas a Flashtool y le das Start, listo. repito: Actualiza el Controlador o Driver
Click to expand...
Click to collapse
entonces tengo que actualizar preolader de mi celular para que funcione en flash tool

mario 1 said:
entonces tengo que actualizar preolader de mi celular para que funcione en flash tool
Click to expand...
Click to collapse
English is required here, if you want, you can write both.
Not sure what exactly is your issue, if you want to describe it better, it'll be useful.

SubwayChamp said:
English is required here, if you want, you can write both.
Not sure what exactly is your issue, if you want to describe it better, it'll be useful.
Click to expand...
Click to collapse
Hi guys, I get the same error on a Xiaomi Redmi Note 8 Plus, installed the MTK USB Drivers, Bypassed the usb, loaded the global begonia miui 10 flashboot for it, DA/ Scatter/ Auth loaded up, i see the MTK Port in my device manager but i cant find it in SP Flash tool Options/ Connection/ UART .. why ? Is that the problem ? It may be a driver problem, are my drivers bad (MTK Usb Driver v1.0.8) ? Can you guys give some tips on good drivers for this operation ? Thank you in advance.

Dr4kunov said:
Hi guys, I get the same error on a Xiaomi Redmi Note 8 Plus, installed the MTK USB Drivers, Bypassed the usb, loaded the global begonia miui 10 flashboot for it, DA/ Scatter/ Auth loaded up, i see the MTK Port in my device manager but i cant find it in SP Flash tool Options/ Connection/ UART .. why ? Is that the problem ? It may be a driver problem, are my drivers bad (MTK Usb Driver v1.0.8) ? Can you guys give some tips on good drivers for this operation ? Thank you in advance.
Click to expand...
Click to collapse
Once you bypassed restriction, then keep connected to the PC, and just run SPFT, take a look how your device appears on device manager and upload the screenshot here.

I forgot to mention.. the device is locked on miui cloud and i dont have the account, so i cant unlock the dev mode, is that the problem ? Do i need to enter edl test state ? shorting the motherboard test pins ? The device only appears in libusb as Redmi Note 8 plus, i install the mediatek driver but .. no succes.

SubwayChamp said:
Uncheck preloader and check again. Let me know, probably you are missing something more.
Click to expand...
Click to collapse
can you help me as well ? i am having the same issue , the port com12 is getting detected but no luck so far

kazuhiko23124 said:
hello I recently failed to install twrp and got into bootloop so i search here how to unbrick my phone and I found a solution but the spflash tool always have this error. I already did bypassbrom and successfully get the protection disabled status the only problem is when I am trying to flash the rom to my device it will always show like this
View attachment 5394419
Click to expand...
Click to collapse
flash tool in the C:\ ??

SubwayChamp said:
OK, you said you passed the unauthorized verification, I guess you installed the devel filters and so on.
Now you have to set the SP Flash tool in Options/General Check LIB DA match and Check Storage Life Cycle and in Connection; UART/Baud Rate to 921600
Click to expand...
Click to collapse
I have same error. how can i post for the question please guide me

My system says, (unknown USB device), even with drivers

zoalmat said:
My system says, (unknown USB device), even with drivers
Click to expand...
Click to collapse
The thing is that the drivers must be updated in the communication before your device and the PC, not your PC only.
This means you have to see where it is the change on the device manager when you plugged your device, if you need the preloader mode, firstly you have to see your device under COM Port, to can update it. You can provide some screenshot from the list at this exact time, to see it.