Related
i have unlocked booloader. i have installed custom recovery pitch black. after that i downloaded custom rom from xda (xtended rom) (evolution x rom) (havoc os rom) miui (12.5 beata rom)
i cleared the folders like dalvik, data,, magisk module, substratum overlays etc
after that i reset data, cache, and dalvik cache
then, format data by writing yes
for evolution x, i chose install option and i select evolution x rom
i slide to the right to start flashing.
after completing mobile stuck into fastboot screen.
none of them worked for me.
for havoc os, i tried the same procedure. this time screen struck on logo redmi (bootloop)
for miui, i tried same procedure and after quarrelling with my mobile, i got success to install it but i had greed so i tried ti nstall evolution x, havoc etc but they get installed but they dont get reboot. either fastboot screen appears or bootloop starts (on-of)
where am i making mistake ?? please help me.
alien2021 said:
i have unlocked booloader. i have installed custom recovery pitch black. after that i downloaded custom rom from xda (xtended rom) (evolution x rom) (havoc os rom) miui (12.5 beata rom)
i cleared the folders like dalvik, data,, magisk module, substratum overlays etc
after that i reset data, cache, and dalvik cache
then, format data by writing yes
for evolution x, i chose install option and i select evolution x rom
i slide to the right to start flashing.
after completing mobile stuck into fastboot screen.
none of them worked for me.
for havoc os, i tried the same procedure. this time screen struck on logo redmi (bootloop)
for miui, i tried same procedure and after quarrelling with my mobile, i got success to install it but i had greed so i tried ti nstall evolution x, havoc etc but they get installed but they dont get reboot. either fastboot screen appears or bootloop starts (on-of)
where am i making mistake ?? please help me.
Click to expand...
Click to collapse
For havoc os, you should flash no oss vendor before havoc rom
I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
Atanassoww said:
I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
Click to expand...
Click to collapse
Do you get Widevine L1 on havoc os?
Qpb said:
Do you get Widevine L1 on havoc os?
Click to expand...
Click to collapse
Yes don't worry about this. Everything works!
Atanassoww said:
I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
Click to expand...
Click to collapse
Which did you flash? Eu stable or weekly beta?
Qpb said:
Which did you flash? Eu stable or weekly beta?
Click to expand...
Click to collapse
There is no EU version of Xiaomi.eu for Redmi 9T. There are only Chinese based, Weekly and Stable with gapps. Blame Xiaomi for that..
Atanassoww said:
There is no EU version of Xiaomi.eu for Redmi 9T. There are only Chinese based, Weekly and Stable with gapps. Blame Xiaomi for that..
Click to expand...
Click to collapse
By EU I mean Xiaomi.eu rom
Qpb said:
By EU I mean Xiaomi.eu rom
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only Poco M3 have Global
Atanassoww said:
View attachment 5472137
Only Poco M3 have Global
Click to expand...
Click to collapse
Yeah I mean China rom without ads, bloatware, and more languages
Qpb said:
Yeah I mean China rom without ads, bloatware, and more languages
Click to expand...
Click to collapse
Of Course!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awaken OS for Redmi 7/Y3 [onclite]
#include <std_disclaimer.h>
/*
* Your warranty is void. Or...Valid? Probably?
*
* Project Awaken and its maintainers are not responsible for bricked devices,
* dead SD cards, data loss, thermonuclear war, or economic crisis caused by
* Awaken OS. YOU are choosing to make these modifications, and if you
* point your finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Born different, Now Awaken
Awaken OS brings consistent, fluent, and smooth experience with all your must-have customizations, for you, for the community, and everyone.
- Project Awaken -
Saikiran
Ninad Patil [REIGNZ]
Mukul [undead]
- Designers -
Hugwalk
Jagadish
Glitch
Find me on Telegram! @tech_rom
Awaken OS 2.6 Device Changelogs
You may have a login problem in GApps, So that's why I have provided you with Vanilla Build ( ROM Side )
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Cache / Data / System
4. Flash ROM
5. Flash Gapps (optional)
6. Flash Magisk (optional)
7. Reboot to System and #beAwakened
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System and #beAwakened
Download Here / GApps / ScreenShots ( Use Telegram )
Reach Us
Official Channel / Official Discussion
AwakenOS Official
Official Announcement / Official Community
Social Media - Tech Rom
Youtube / Telegram
Awaken Source Code
Rom Source / Github
Changelog:
• Initial Android 12.1 Rebase
• April Security Patch
• Pixel 6 Pro April Build Fingerprint
• Import XiaomiParts from sdm845-common
• Enable F2FS user data
• Enable vibration multiple intensities
• Don't write binary XML files
Redmi 7/Y3 Onclite Project
Device Source / Kernel Source / Vendor Source
ROM Version: Android 12.1 - Eclipse 2.6
ROM Kernel: Linux 4.9.287
Based On: AOSP
Release Type: Stable
I updated your Rom. no matter the pure installation or dirty installation, they are all stuck in the boot screen and can not fully enter the system. Why is this? Would you please teach me?
Also, my red rice 7 works well in your version 2.1!
雪獒2021 said:
I updated your Rom. no matter the pure installation or dirty installation, they are all stuck in the boot screen and can not fully enter the system. Why is this? Would you please teach me?
Click to expand...
Click to collapse
Dude it’s a F2FS format
Just install awaken 2.2 as well you know
Then go to settings and select manage partition
Follow guide
1. Open manage partition
2. Click on data
3. Now change your data partition
4. Select F2FS and swipe
5. After complete, reboot now
Aniket Pro said:
Dude it’s a F2FS format
Just install awaken 2.2 as well you know
Then go to settings and select manage partition
Follow guide
1. Open manage partition
2. Click on data
3. Now change your data partition
4. Select F2FS and swipe
5. After complete, reboot now
Click to expand...
Click to collapse
Hello! Is your version 2.1 and 2.2 in f2fs format? I use the official twrp to install version 2.1 according to your tutorial. Whether it is dirty or pure, it works well. However, version 2.2, whether pure installation or dirty installation based on version 2.1, will be stuck in the boot screen and cannot enter the system!
雪獒2021 said:
Hello! Is your version 2.1 and 2.2 in f2fs format? I use the official twrp to install version 2.1 according to your tutorial. Whether it is dirty or pure, it works well. However, version 2.2, whether pure installation or dirty installation based on version 2.1, will be stuck in the boot screen and cannot enter the system!
Click to expand...
Click to collapse
Join my telegram dude i will give you proper guide
Aniket Pro said:
加入我的电报伙伴，我引导你适当的指导
Click to expand...
Click to collapse
Aniket Pro said:
Join my telegram dude i will give you proper guide
Click to expand...
Click to collapse
Thank you for your invitation. I don't understand English. I communicate with you here with the help of Google translation. The telegram doesn't have Chinese. I can't communicate with you. I'm sorry!
Aniket Pro said:
Join my telegram dude i will give you proper guide
Click to expand...
Click to collapse
Today, I tried other Android 12 threads of Hongmi 7 on XDA, which can run smoothly. Only your version 2.2 can not be installed and run smoothly. What did I do wrong?
雪獒2021 said:
Thank you for your invitation. I don't understand English. I communicate with you here with the help of Google translation. The telegram doesn't have Chinese. I can't communicate with you. I'm sorry!
Click to expand...
Click to collapse
I can understand your problem and I will try to guide you right here
Many people will think that why I have created f2fs build but would like to tell everyone that your recovery encryption problem will be fixed inside this build
First of all you have to follow some steps which is most important for you and can get your rom boot up
1. First of all format your device
2. After that click on advance in which you will see dalvik,cache,system,data,vendor fix all these and swipe to clear
3. After complete reboot your device in recovery again ( reboot - recovery)
4. When your device is in recovery mode again you have to flash Awakener 2.2 rom
5. After completion of flashing you do not have to reboot your device but go to the bag and format your device again by typing yes
6. After completing, you have to go to the recovery settings, where you will see Manage Partition
7. After clicking on manage partition, you will see the data option, after clicking on the data, the last option will be change fs or change format
8. After clicking on that option, there will be an option f2fs, you just have to click on it and swipe, after completing everything, you have to reboot your device and your device will take the boot up
Hope you will get proper knowledge
Bro boot looping after updating rom
Aniket Pro said:
I can understand your problem and I will try to guide you right here
Many people will think that why I have created f2fs build but would like to tell everyone that your recovery encryption problem will be fixed inside this build
First of all you have to follow some steps which is most important for you and can get your rom boot up
1. First of all format your device
2. After that click on advance in which you will see dalvik,cache,system,data,vendor fix all these and swipe to clear
3. After complete reboot your device in recovery again ( reboot - recovery)
4. When your device is in recovery mode again you have to flash Awakener 2.2 rom
5. After completion of flashing you do not have to reboot your device but go to the bag and format your device again by typing yes
6. After completing, you have to go to the recovery settings, where you will see Manage Partition
7. After clicking on manage partition, you will see the data option, after clicking on the data, the last option will be change fs or change format
8. After clicking on that option, there will be an option f2fs, you just have to click on it and swipe, after completing everything, you have to reboot your device and your device will take the boot up
Hope you will get proper knowledge
Click to expand...
Click to collapse
Hello, I'm disturbing you again! I can't do the sixth point you wrote. I can't find the option to manage partitions in my twrp. What should I do? I use twrp3 6.0-9. Does this version not have this option?
雪獒2021 said:
Hello, I'm disturbing you again! I can't do the sixth point you wrote. I can't find the option to manage partitions in my twrp. What should I do? I use twrp3 6.0-9. Does this version not have this option?
Click to expand...
Click to collapse
Try the orange fox recovery link: https://www.mediafire.com/file/qwzicg4vfrijcya/OrangeFox-onclite-beta%40R11.1.zip/file
Rashik lama said:
Bro boot looping after updating rom
Click to expand...
Click to collapse
First of all, you have to follow some steps which are most important for you and can get your rom bootup
1. First of all format your device
2. After that click on advance in which you will see dalvik, cache, system, data, vendor fix all these and swipe to clear
3. After complete reboot your device in recovery again ( reboot - recovery)
4. When your device is in recovery mode again you have to flash Awakener 2.2 rom
5. After completion of flashing you do not have to reboot your device but go to the bag and format your device again by typing yes
6. After completing, you have to go to the recovery settings, where you will see Manage Partition
7. After clicking on manage partition, you will see the data option, after clicking on the data, the last option will change fs or change format
8. After clicking on that option, there will be an option f2fs, you just have to click on it and swipe, after completing everything, you have to reboot your device and your device will take the boot up
Hope you will get proper knowledge
Aniket Pro said:
First of all, you have to follow some steps which are most important for you and can get your rom bootup
1. First of all format your device
2. After that click on advance in which you will see dalvik, cache, system, data, vendor fix all these and swipe to clear
3. After complete reboot your device in recovery again ( reboot - recovery)
4. When your device is in recovery mode again you have to flash Awakener 2.2 rom
5. After completion of flashing you do not have to reboot your device but go to the bag and format your device again by typing yes
6. After completing, you have to go to the recovery settings, where you will see Manage Partition
7. After clicking on manage partition, you will see the data option, after clicking on the data, the last option will change fs or change format
8. After clicking on that option, there will be an option f2fs, you just have to click on it and swipe, after completing everything, you have to reboot your device and your device will take the boot up
Hope you will get proper knowledge
Click to expand...
Click to collapse
Thanks for your help buddy . I am able to use awaken os 2.2 now
Hello, the latest (2.6) version can't log in to Google, and it doesn't work to hang a VPN. Google Suite doesn't run at all. What should I do?
Aniket Pro said:
Awaken OS for Redmi 7/Y3 [onclite]
Born different, Now Awaken
Awaken OS brings consistent, fluent, and smooth experience with all your must-have customizations, for you, for the community, and everyone.
- Project Awaken -
Saikiran
Ninad Patil [REIGNZ]
Mukul [undead]
- Designers -
Hugwalk
Jagadish
Glitch
Find me on Telegram! @tech_rom
Awaken OS 2.6 Device Changelogs
You may have login problem in GApps, So that's why I have provided you with Vanilla Build ( ROM Side )
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Cache / Data / System
4. Flash ROM
5. Flash Gapps (optional)
6. Flash Magisk (optional)
7. Reboot to System and #beAwakened
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System and #beAwakened
Download Here / ScreenShots ( Use Telegram )
Reach Us
Official Channel / Official Discussion
AwakenOS Official
Official Announcement / Official Community
Social Media - Tech Rom
Youtube / Telegram
Awaken Source Code
Rom Source / Github
Redmi 7/Y3 Onclite Project
Device Source / Kernel Source / Vendor Source
ROM Version: Android 12.1 - Eclipse 2.6
ROM Kernel: Linux 4.9.287
Based On: AOSP
Release Type: Stable
Click to expand...
Click to collapse
Changelog:
• Initial Android 12.1 Rebase
• April Security Patch
• Pixel 6 Pro April Build Fingerprint
• Import XiaomiParts from sdm845-common
• Enable F2FS user data
• Enable vibration multiple intensities
• Don't write binary XML files
Bugs:
• You may have a login problem in GApps, So that's why I have provided you with Vanilla Build ( ROM Side )
Changelog:
• Initial Android 12.1 Rebase
• April Security Patch
• Pixel 6 Pro April Build Fingerprint
• Import XiaomiParts from sdm845-common
• Enable F2FS user data
• Enable vibration multiple intensities
• Don't write binary XML files
Bugs:
• You may have a login problem in GApps, So that's why I have provided you with Vanilla Build ( ROM Side )
Dear brother: Is there any plan to adapt to Android 13?
Great rom bro thanks for your updates and hope you will do better again and again .
OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox Recovery for the Oneplus 8 / 8t / 8 Pro / 9r
Download (for Android 13 ROMs) (OOS13 Based)
Download (for Android 12.x, 13 ROMs) (OOS12 Based)
Download FBEv1 Version Oneplus 8 (OOS13 Based)
Download FBEv1 Version Oneplus 8Pro (OOS12 Based)
Download FBEv1 Version Oneplus 8Pro (OOS13 Based)
Boot it with: fastboot boot OrangeFox-R12.1-OPKONA-V19.img
or flash it with: fastboot flash recovery OrangeFox-R12.1-OPKONA-V19.img
Orangefox R12.1 can only be flashed to the recovery partition if you have OOS12 Firmware, but you can still boot it with fastboot boot if you are on OOS11 Firmware and need to decrypt data on Android 12 or Android 13 ROMs.
Some things like USB OTG etc are not working when using fox_12.1 on OOS11 Firmware!
If the touchscreen is not working for you after booting/flashing Orangefox please Update your OOS/Firmware to a newer Version!
Take a look at this Post from TWRP in regards of Backup and Restore or
here from the Orangefox wiki.
Spoiler: Flashing Instructions and switching OOS Firmware Base
Keep in mind! Never flash a recovery file if you are not on the same OOS Firmware as the recovery is for, otherwise you will end up in Qualcomm Crashdump mode or just a black screen.
Always just do a fastboot boot recovery.img until you are on the same OOS Firmware on your phone as the recovery is for, only then you can flash it with fastboot flash recovery as well!
From OOS11 Firmware to OOS12 Firmware ROM
------------------------------------------------------
Check DDR RAM type (from Windows cmd)
adb shell getprop ro.boot.ddr_type
0 - represents your device is LPDDR4X (use DDR0 Firmware file)
1 - represents your device is LPDDR5 (use DDR1 Firmware file)
or from Terminal on your phone
getprop ro.boot.ddr_type
0 - represents your device is LPDDR4X (use DDR0 Firmware file)
1 - represents your device is LPDDR5 (use DDR1 Firmware file)
When you are on OOS12 use this from the Orangefox Terminal:
cat /proc/devinfo/ddr_type
Download latest Orangefox 12.1 img file from here
Download OOS12 flashable Firmware for your phone from here or, Oneplus 8t, Oneplus 9r
adb reboot bootloader
fastboot boot OrangeFox_R12.1-xx.img
adb sideload fw_Oneplus8T_EU_c21_DDR0.zip
adb rebooot bootloader
fastboot flash recovery OrangeFox_R12.1-xx.img
fastboot reboot recovery
Apply Update - apply via ADB
adb sideload ROM.zip
Factory reset/Format Data
Reboot System
From OOS12 Firmware to OOS11 Firmware ROM
------------------------------------------------------
Please only use this right now when you have DDR4 RAM in your phone!
Check DDR RAM type (from Windows cmd)
adb shell getprop ro.boot.ddr_type
0 - represents your device is LPDDR4X (use DDR0 Firmware file)
1 - represents your device is LPDDR5 (use DDR1 Firmware file)
or from Terminal on your phone
getprop ro.boot.ddr_type
0 - represents your device is LPDDR4X (use DDR0 Firmware file)
1 - represents your device is LPDDR5 (use DDR1 Firmware file)
When you are on OOS12 use this from the Orangefox Terminal:
cat /proc/devinfo/ddr_type
Download latest Orangefox 12.1 img file from here
Download OOS11 flashable Firmware for your phone from here or, Oneplus 8t, Oneplus 9r
Download Recovery_OOS11_FW_Android12_decryption.img from here
adb reboot bootloader
fastboot boot Orangefox R12.1 recovery
flash OOS11.0.13.13 Firmware
flash ROM.zip
reboot to bootloader
fastboot boot Recovery_OOS11_FW_Android12_decryption.img
Factory reset/Format Data
Reboot System
ROM Flashing instructions:
(take a look at the Spoiler above if you need to switch OOS Firmware Base for your ROM)
From OOS to custom ROM
- Boot to Orangefox
- Format data
- Switch slot
- Reboot to recovery
- sideload/flash ROM
- sideload/flash Orangefox.zip
- reboot to recovery
- Flash Magisk (Magisk can be installed through Fox addons - Install Magisk as well)
- Reboot to system
From custom to custom ROM
- Boot to Orangefox
- Format Data
- sideload/flash ROM
- sideload/flash Orangefox.zip
- Reboot to recovery
- Flash Magisk (Magisk can be installed through Fox addons - Install Magisk as well)
- Reboot to system
For Updating a custom ROM
- Boot to Orangefox
- sideload/flash ROM
- sideload/flash Orangefox.zip
- Reboot to recovery
- Flash Magisk (Magisk can be installed through Fox addons - Install Magisk as well)
- Reboot to system
The Messages failed to mount system, vendor after flashing a ROM can be ignored.
That is due to mounting those for both ext4 and EROFS and of course you can have only one of them.
If you get a Bootloop after flashing a ROM and having done a Format Data do the below:
Boot to bootloader and:
- fastboot devices
- fastboot -w
- fastboot reboot
Source Code: https://gitlab.com/OrangeFox
Device Tree (A12/A13): https://github.com/Wishmasterflo/device_oneplus_opkona/releases
Device Tree OP8/8Pro FBEv1: https://github.com/SENSEIIIII/twrp_device_OnePlus_instantnoodlep
Wiki/FAQ: https://wiki.orangefox.tech/en/guides
OrangeFox Version: R12.1
Version: V19
Last Updated: 05-Jun-2023
Changelog
R12.1 V19 05-Jun-2023
- Updated with latest Orangefox source changes
old Changelogs
Credits
* ApexLegend007 for Android 12.1 device Tree
* The-Incognito for Recovery Trees of Oneplus 8T
* YumeMichi For Implementing Erofs and Other Misc
* bigbiff for decryption
* Pranav Talmale for decryption
* Systemad for original tree
* CaptainThrowback for original tree
* mauronofrio for original tree
* BillGoss for Backup and Restore
* Qnorsten for OOS fix
* TWRP team
* OrangeFox team
thanks so much for hookin up the op8 users with a recovery that has some substance
Am I correct in assuming that I'm not seeing anything in my data partition (for backup purposes) because of this?
Data decryption on OP8 and OP8 Pro is only working when using a OP8 series unified ROM which uses FBEv2 encryption.
FBEv1 encryption which the OP8 and OP8 Pro normally uses is not added to Orangefox (yet).
Click to expand...
Click to collapse
Just wanting to make sure I wasn't missing something!
mmoritz said:
thanks so much for hookin up the op8 users with a recovery that has some substance
Am I correct in assuming that I'm not seeing anything in my data partition (for backup purposes) because of this?
Just wanting to make sure I wasn't missing something!
Click to expand...
Click to collapse
Yes correct.
Thank you
Oneplus 8 Pro Android 12 based custom ROMs not working, crash dump
tnchng said:
Oneplus 8 Pro Android 12 based custom ROMs not working, crash dump
Click to expand...
Click to collapse
On which OOS12 Version are you? And do you have that on both slots?
Have you flashed Orangefox or just booted it?
Make sure you have OOS12 c35 or what you are on on both slots before trying to flash anything.
Then just try to fastboot boot Orangefox first and not flash it directly and see if you can install a ROM and boot to it.
I've tried C.36 with crDroidAndroid-12.1-20220721-instantnoodlep-v8.7, lineage-19.1-20221106-nightly-instantnoodlep-signed, it crash dump
and swithed to 11.0.11.11-20220218 crDroidAndroid-12.1-20220721-instantnoodlep-v8.7, lineage-19.1-20221106-nightly-instantnoodlep-signed, it also crash dump
You mean must c.35
tnchng said:
You mean must c.35
Click to expand...
Click to collapse
No c36 should work as well. And have you flashed Orangefox or just booted it? So the crashdump comes after flashing a ROM and trying to boot to system?
just booted, I want to check OrangeFox-R12.1-Unofficial-OPKONA-V13 work first, but crash dump, not flash the zip now. But for the 11.0.11.11, OrangeFox-R12.1 should work
tnchng said:
just booted, I want to check OrangeFox-R12.1-Unofficial-OPKONA-V13 work first, but crash dump, not flash the zip now. But for the 11.0.11.11, OrangeFox-R12.1 should work
Click to expand...
Click to collapse
Hmm strange as it works for someone else on Oneplus 8Pro. So I dont know why it does not work for you. Sounds strange that it just gives a crash dump when booting into it. Normallly that happens if you flash Orangefox to your phone and have not the same OOS Firmweare on both slots!
Every test I made OOS on both slots. No hurry, recovery for 12 need time. I can wait, thanks your hardworking.
tnchng said:
Every test I made OOS on both slots. No hurry, recovery for 12 need time. I can wait, thanks your hardworking.
Click to expand...
Click to collapse
Also I know that there is someone else who build Orangefox recovery a few days ago using FBEv1 for Oneplus 8 and 8 Pro.
As my unified Orangefox now is using FBEv2 since that is what is used on Oneplus 8t and 9r so te Unified Version is using that.
So you will only be able to decrypt data with my unified Orangefox Version when you use some unified ROM which is using FBEv2.
I will check with the one who build Orangefox with FBEv1 for Oneplus 8/8 Pro if he has published that already somewhere.
Maybe the FBEv1, thank you very much. I'll test asap when you share it.
tnchng said:
Maybe the FBEv1, thank you very much. I'll test asap when you share it.
Click to expand...
Click to collapse
OK that Version is not fully ready yet therfor it is not published anywhere yet.
EDIT:
Whoops... just saw the top post... "Orangefox R12.1 can only be flashed to the recovery partition"... Will this affect Stock OOS12 to update in the future? or can I easily restore stock recovery?
****************
Hi! Does this work with OP8 OOS12 unlocked + rooted? can I do "fastboot boot recovery.img"? Not really worry about decrypt data, just want to get in to flash Magisk. OP has been very bad at releasing full ROM, can't extract boot.img for that purpose.
Like many (I think), I try official TWRP to "fastboot boot recovery.img" and the device got stuck... Anyway... I left the phone for few days..., it booted back in fine.
woofwoof75 said:
EDIT:
Whoops... just saw the top post... "Orangefox R12.1 can only be flashed to the recovery partition"... Will this affect Stock OOS12 to update in the future? or can I easily restore stock recovery?
****************
Hi! Does this work with OP8 OOS12 unlocked + rooted? can I do "fastboot boot recovery.img"? Not really worry about decrypt data, just want to get in to flash Magisk. OP has been very bad at releasing full ROM, can't extract boot.img for that purpose.
Like many (I think), I try official TWRP to "fastboot boot recovery.img" and the device got stuck... Anyway... I left the phone for few days..., it booted back in fine.
Click to expand...
Click to collapse
No it will not affect stock OOS to Update.
I'm using EvolutionX 7.3 (Android13) on a Oneplus8Pro. Do you know which version of the recovery do I have to download?
And also, which encryption does the rom use?
Marcyvee said:
I'm using EvolutionX 7.3 (Android13) on a Oneplus8Pro. Do you know which version of the recovery do I have to download?
And also, which encryption does the rom use?
Click to expand...
Click to collapse
No. I dont know. Check with your ROM Support group or just try to fastboot boot the orangefog.img file and see which Version works.
I can boot all three version of the recovery, but it seems none of them can decrypt data. The Data partition dimension is 0mb.
Anyway, is the first time I use orange fox, and i don't know it very well....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for Oneplus8T [kebab]
What is this?
PixelExtended ROM (or PEX for short), We are Combining Pixel Goodies with some essential features you were missing in Pixel Experience, delivering a ROM that promise you stabilty and being feature-rich at the same time . TBH this ROM will keep it's Pixel' idea intact and won't be bloat with unwanted features .
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13 (T)
FeaturesEverything You've Always Wished For With Pixel Experience> OOS (Oxygen OS) Styled Traffic Indicators
> VoLTE Icon Customization
> Smart Charging
> Adaptive Media Playback
> Notification Counter/Logs
> G-Visual Mod
> FOD (Fingerprint On Display) Customizations
> Status Bar Customizations
> Volume Panel Customizations
> LS (Lock Screen) Clock
> Switch Styles
> Tinted QS (Quick Settings) Tiles
> App Lock with Face Unlock
> QS Customizations
> Gesture Customizations
> New Accents/Fonts/Primary Colors
Whats working?
All
First Time Install / Clean Flash
1. Be on the OOS13 (F13 or F15, F62)
2. Download copy_partitions, vbmeta, dtbo, recovery, and rom for your device from here
3. Reboot to bootloader
4.fastboot flash vbmeta vbmeta.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot reboot recovery
5. While in recovery, navigate to Apply update -> Apply from ADB
6. adb sideload copy_partitions.zip (press "yes" when signature verification fails) and then reboot to recovery
7. Repeat step 5 and adb sideload rom.zip (replace "rom" with actual filename)
8. Format data, reboot to recovery
Update
1. Reboot to bootloader
2. While in recovery, navigate to Apply update -> Apply from ADB
3. adb sideload rom.zip (replace "rom" with actual filename)
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Mega
Android OS version: 13.0_r43
Security patch level: May 2023
Build author/Device Maintainer: bojantanasic
Source code: https://github.com/PixelExtended
Prebuilt kernel:
GitHub - bojantanasic/android_kernel_oneplus_sm8250: Android 13 kernel for oneplus 8T
Android 13 kernel for oneplus 8T. Contribute to bojantanasic/android_kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
PixelExtended Developer: Aryan Gupta
Changes 23.05.2023.
-brightnes fix
-fix for theme and fonts
-switch to erofs (now system is fluid like butter)
-add App lock (Settings/Security/More security/App lock)
Kernel
- update kernel to v4.19.283
Includes OOS Cam?
kuto232 said:
Includes OOS Cam?
Click to expand...
Click to collapse
OOS cam not include in rom, you can use LMC8.4 for better result then OOS cam.
Hasli: LMC8.4_R13
Download LMC8.4_R13 by Hasli.
www.celsoazevedo.com
and use config for better result.
Thank you for the ROM.
I would like to ask if anybody knows - does dual SIM work on this ROM (specifically enabling and disabling certain SIMs on the fly)? I know Lineage has issues with that along with auto brightness (jumps from low brightness to too bright with no in between) on KB2005.
netusername said:
Thank you for the ROM.
I would like to ask if anybody knows - does dual SIM work on this ROM (specifically enabling and disabling certain SIMs on the fly)? I know Lineage has issues with that along with auto brightness (jumps from low brightness to too bright with no in between) on KB2005.
Click to expand...
Click to collapse
Brightness working just fine,as you can see in screenshot.I don't have second sim card to test, but I think that is fine too.
Can't download the vbmeta and copy partition files from the link you provided.
silverhazesupreme said:
Can't download the vbmeta and copy partition files from the link you provided.
Click to expand...
Click to collapse
Sourceforge delete files from server, very strange. I will upload on mega today.
For install temporary use this files
recovery:
https://mirrorbits.lineageos.org/recovery/kebab/20230119/lineage-20.0-20230119-recovery-kebab.img
vbmeta:
https://mirror.math.princeton.edu/pub/lineageos/full/kebab/20230119/vbmeta.img
copy_partitions:
https://mirrorbits.lineageos.org/tools/copy-partitions-20220613-signed.zip
Thanks LineageOs team for files
Sourceforge has problem with files today!
Good as a daily driver? No stuttering, just fluid?
Goat24K said:
Good as a daily driver? No stuttering, just fluid?
Click to expand...
Click to collapse
Here is small video how fluid is rom, no stuttering. Kernel is great in turns of battery and performance.
Kernel is Illusionx with small performance upgrade by me.Thanks Blaster4385 for kernel.
Video
Streamable Video
Watch this video on Streamable.
streamable.com
Does USB-C video out work? I haven't run a customer rom in a while and I specifically want to install one that has video out working. I can't recall if it was a pixel experience rom or not the last time I had it working.
bookofjoshua said:
Does USB-C video out work? I haven't run a customer rom in a while and I specifically want to install one that has video out working. I can't recall if it was a pixel experience rom or not the last time I had it working.
Click to expand...
Click to collapse
I don't have adapter to test, if you are on OOS13 and if it is working and if this is essential for you than is better to stay on OOS13. If I find cable I will test.
bojantanasic said:
I don't have adapter to test, if you are on OOS13 and if it is working and if this is essential for you than is better to stay on OOS13. If I find cable I will test.
Click to expand...
Click to collapse
Thanks for the reply. I am not, I have a KB2007 and there isn't a OOS13 available (yet, as far as I know). I can just load it and see I guess.
bookofjoshua said:
Thanks for the reply. I am not, I have a KB2007 and there isn't a OOS13 available (yet, as far as I know). I can just load it and see I guess.
Click to expand...
Click to collapse
This rom is for F13 or F15 firmware, if you are on Android 12 then this rom is not for you, because touch wil not work.
I was upgrading from clean OOS13 F15 and when sideloading the ROM, I've got:
Error applying update: 63 (ErrorCode::kPostInstallMountError)
ERROR: recovery: Error in /sideload/package.zip (status 1)
Full logs here: https://gist.github.com/ivirtex/3a1c8fc464050e0310c37c795346aaae
ivirtex said:
I was upgrading from clean OOS13 F15 and when sideloading the ROM, I've got:
Error applying update: 63 (ErrorCode::kPostInstallMountError)
ERROR: recovery: Error in /sideload/package.zip (status 1)
Full logs here: https://gist.github.com/ivirtex/3a1c8fc464050e0310c37c795346aaae
Click to expand...
Click to collapse
You need to update the recovery through the bootloader before you can flash the Rom.You on Los recovery now?
bojantanasic said:
You need to update the recovery through the bootloader before you can flash the Rom.You on Los recovery now?
Click to expand...
Click to collapse
Yes, I flashed provided lineage-20.0-20230119-recovery-kebab
ivirtex said:
Yes, I flashed provided lineage-20.0-20230119-recovery-kebab
Click to expand...
Click to collapse
Did you format data?
And did you copy partition?
You mast format data and after that copy partition.
And after that adb sidload rom.zip.
I just update mega directory with pixelextended recovery, try to install and then tray to install rom.
Sorry if install instructions not clear
Did you install dtbo.img, if not that is problem.
Here is install instruction
Flashing additional partitions
warning
Warning: This platform requires additional partitions to be flashed for recovery to work properly, the process to do so is described below.
Download the following files from the directory named with the latest date here.
dtbo.img
vbmeta.img
Power off the device, and boot it into bootloader mode:
With the device powered off, hold Volume Up + Volume Down + Power.
Flash the downloaded image files to your device by typing (replace <...> with the actual filenames!):
fastboot flash dtbo <dtbo>.img
fastboot flash vbmeta <vbmeta>.img
bojantanasic said:
Did you format data?
And did you copy partition?
You mast format data and after that copy partition.
And after that adb sidload rom.zip.
I just update mega directory with pixelextended recovery, try to install and then tray to install rom.
Sorry if install instructions not clear
Did you install dtbo.img, if not that is problem.
Here is install instruction
Flashing additional partitions
warning
Warning: This platform requires additional partitions to be flashed for recovery to work properly, the process to do so is described below.
Download the following files from the directory named with the latest date here.
dtbo.img
vbmeta.img
Power off the device, and boot it into bootloader mode:
With the device powered off, hold Volume Up + Volume Down + Power.
Flash the downloaded image files to your device by typing (replace <...> with the actual filenames!):
fastboot flash dtbo <dtbo>.img
fastboot flash vbmeta <vbmeta>.img
Click to expand...
Click to collapse
Thanks, flashing dtbo.img allowed me to install the ROM and everything seems to work fine, please update your instructions, so others won't have this problem.
New build are up
Happy flashing
Decent but the sound externally is awful. Very low and static-like. I usually have to turn it down, but i had to turn this ll the way up and i barely heard the song. *sigh* any suggestions? It's the same with the ring tones, they're VERY low.. what is going on here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Poco M4 5G/ Redmi Note 11 E /R & Redmi 10 5G
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13.0
What's working?
WiFi
RIL
Mobile data
GPS
Bluetooth
IR
Lights
Sound / vibration
Audio
Android Auto
Encryption
Known issues
Find & Send Proper Log
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Donate
Main PixelExperience Developer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Install:
1 - Flash Recovery via fastboot Download Recovery
Now Open Cmd Make Sure Adb Driver's Are Installed Properly And Type
fastboot flash boot nameofrecoveryfile.img
2 - Reboot recovery
3 - Factory Reset -> Format data/factory reset (backup sdcard before format)
4 - Flash ROM via adb sideload (Apply update -> Apply from ADB)
- adb sideload pe_rom_file_name.zip
5 - Reboot system now
Contributor
@adarsh956
@Sushrut1101
ROM OS Version: Android 13
ROM Kernel: Linux 4.14.xxx
Based on: AOSP
Version Information
Status: Stable
Current Version: 2023-05-18
Kernel Source: https://github.com/thetanmaygupta/kernel_xiaomi_light
Reserved For Lightness
Thanks To Whole Light Community
Rom uses prebuilt kernel
thetanmaygupta said:
PixelExperience for Poco M4 5G/ Redmi Note 11 E /10 Prime+ 5G
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13.0
What's working?
WiFi
RIL
Mobile data
GPS
Bluetooth
IR
Lights
Sound / vibration
Audio
Android Auto
Encryption
Known issues
Camera
Flashlight
Fingerprint reader
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Donate
Main PixelExperience Developer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Install:
1 - Flash Recovery via fastboot (Download: Here)
- fastboot flash boot pixel_recovery.img
2 - Reboot recovery
3 - Factory Reset -> Format data/factory reset (backup sdcard before format)
4 - Flash ROM via adb sideload (Apply update -> Apply from ADB)
- adb sideload pe_rom_file_name.zip
5 - Reboot system now
Contributor
@adarsh956
@Sushrut1101
Piyush Sir & Our Whole Light Community
ROM OS Version: Android 13
ROM Kernel: Linux 4.14.xxx
Based on: AOSP
Version Information
Status: Beta
Current Version: 2023-03-13
Click to expand...
Click to collapse
give me trees i'll update prebuilts
Just bought Redmi 10 5g, can't wait to get unlocked bootloader to the this rom
I flashed, but bootloop. Maybe something wrong?
K1_by said:
I flashed, but bootloop. Maybe something wrong?
Click to expand...
Click to collapse
Takes Time To Boot btw did you even wiped data from pixel experience recovery ?
Have tried to test with Redmi 10 5g, sucessfully passed 1-3 steps (flash recovery, reboot into recover, reset), however with the sideload attempt i get error in the phone screen:
ERROR: recovery : Error in /sideload/package.zip (status 1)
Install completed with status 1.
Installation aborted.
Attached screenshot from recovery log.
i'm also getting boot loop after recovery flash, but pressing "Volume up" i enter recovery
jeegiz said:
i'm also getting boot loop after recovery flash, but pressing "Volume up" i enter recovery
Click to expand...
Click to collapse
If you're using miui 14 it'll get bootloop obviously because this recovery is based on 13.0.11 version I'll soon update vendor along prebuilt
jeegiz said:
Have tried to test with Redmi 10 5g, sucessfully passed 1-3 steps (flash recovery, reboot into recover, reset), however with the sideload attempt i get error in the phone screen:
ERROR: recovery : Error in /sideload/package.zip (status 1)
Install completed with status 1.
Installation aborted.
Attached screenshot from recovery log.
Click to expand...
Click to collapse
What you're flashing? I believe pixel rom and other things working properly even I flashed miui 13 as well from it
thetanmaygupta said:
What you're flashing? I believe pixel rom and other things working properly even I flashed miui 13 as well from it
Click to expand...
Click to collapse
Your assumption is right, i'm flashing from miui 14, i have flashed with adb sideload following file: Download
PixelExperience_light-13.0-20230313-1046-UNOFFICIAL.zip
thetanmaygupta said:
Takes Time To Boot btw did you even wiped data from pixel experience recovery ?
Click to expand...
Click to collapse
Yes. I thinks its becouse if MIUI 13. What version do I need? I use 13.0.2 india
K1_by said:
Yes. I thinks its becouse if MIUI 13. What version do I need? I use 13.0.2 india
Click to expand...
Click to collapse
Test this one link valid for 24hr https://free.keep.sh/VRFrUZzcPS57gNtz/boot.img
jeegiz said:
Your assumption is right, i'm flashing from miui 14, i have flashed with adb sideload following file: Download
PixelExperience_light-13.0-20230313-1046-UNOFFICIAL.zip
Click to expand...
Click to collapse
Tried to do same steps with Miui 13 on Redmi 10 5G (restored from miui_LIGHTEEAGlobal_V13.0.11.0.SLSEUXM_b75e66791d_12.0.zip)
Still same issues:
1. After PE recovery install there is boot loop, but it is possible to enter fastboot/ pe recovery with volume up/down
2. Trying to install PE rom (PixelExperience_light-13.0-20230313-1046-UNOFFICIAL.zip) with adb sideload or from update.zip in sdcard results in the same error, as previously stated (Error in /sideload/package.zip (status 1))
jeegiz said:
Tried to do same steps with Miui 13 on Redmi 10 5G (restored from miui_LIGHTEEAGlobal_V13.0.11.0.SLSEUXM_b75e66791d_12.0.zip)
Still same issues:
1. After PE recovery install there is boot loop, but it is possible to enter fastboot/ pe recovery with volume up/down
2. Trying to install PE rom (PixelExperience_light-13.0-20230313-1046-UNOFFICIAL.zip) with adb sideload or from update.zip in sdcard results in the same error, as previously stated (Error in /sideload/package.zip (status 1))
Click to expand...
Click to collapse
Wait For Next Update This Is Only Working For Poco M4 5G
NO ETA'S But It Will Be Released Soon Some Big Surprises Coming For Both Camellia And Light User's
Thank You For Your Patience As I Didn't Had Redmi 11 Prime 5G Tester's Because Of That Only Poco M4 5G Users Were Able To Flash Recovery & Rom I Will Suggest Waitttt
jeegiz said:
Your assumption is right, i'm flashing from miui 14, i have flashed with adb sideload following file: Download
PixelExperience_light-13.0-20230313-1046-UNOFFICIAL.zip
Click to expand...
Click to collapse
Right
18 May Update
• This Rom Can Be Flashed On Miui 14 As Reported By @Waqarkhanlive
• May Security Patch
• Safetynet Passes By Default
• YouTube Lag Fixed (Use Miui 14 As Base)
•Torch Fixed
•Camera Fixed
•Fingerprint Fixed
Special Thanks To
• @adarsh756 for Base DT
• @Waqarkhanlive for Testing