I have been having a few issues lately. When I rooted my phone, I lost access to rcs messaging (like it wont let me register for it) and when I connect to a Bluetooth device it disappears from the paired list when I restart the phone. Another issue is that I no longer can see the estimated time till 100% when charging my phone. Does anyone else experience this or does anyone know how to fix it?
My kernels which I had installed are: physwizz --> carbon -> eureka -> carbon (current)
My device is rooted with magisk and the only module right now is the vipe4android module.
Any help would be appreciated.
Borkode said:
I have been having a few issues lately. When I rooted my phone, I lost access to rcs messaging (like it wont let me register for it) and when I connect to a Bluetooth device it disappears from the paired list when I restart the phone. Another issue is that I no longer can see the estimated time till 100% when charging my phone. Does anyone else experience this or does anyone know how to fix it?
My kernels which I had installed are: physwizz --> carbon -> eureka -> carbon (current)
My device is rooted with magisk and the only module right now is the vipe4android module.
Any help would be appreciated.
Click to expand...
Click to collapse
time until end of charging is not shown due to kernel. At the expense of bluetooth, it's kind of because of the firmware.
SirKosichka said:
time until end of charging is not shown due to kernel. At the expense of bluetooth, it's kind of because of the firmware.
Click to expand...
Click to collapse
I just flashed stock firmware and rooted with magisk and also installed twrp. I noticed that I am still having the bluetooth issue even tho I have a mostly stock config now.
Borkode said:
I just flashed stock firmware and rooted with magisk and also installed twrp. I noticed that I am still having the bluetooth issue even tho I have a mostly stock config now.
Click to expand...
Click to collapse
I can't help you with the problem with bluetooth
SirKosichka said:
I can't help you with the problem with bluetooth
Click to expand...
Click to collapse
Oh okay, thanks - I got to fix the issue by flashing the bluetooth library patcher module for Magisk if someone is having that issue.
Related
Is your WiFi Calling staying connected after updating to 10n? Mine was working fine on 10h, but on 10n it disconnects after 5-10 minutes with a REG99: Unable to connect error and won't reconnect until I reboot the phone.
I did all the troubleshooting steps with T-Force: factory reset, got a new SIM card, got an update sent to the SIM card twice, factory reset again, and no dice.
Is anyone else experiencing this on 10n? I'm on stock rooted 10n (odex).
EDIT: It's XPosed. As long as the XPosed Framework is installed (even with no modules), WiFi Calling is completely broken.
I was getting the same error on 10N. I called and was transferred to Tech Support. They updated my E-911 info and was back up in running in less than 5 minutes
siraltus said:
Is your WiFi Calling staying connected after updating to 10n? Mine was working fine on 10h, but on 10n it disconnects after 5-10 minutes with a REG99: Unable to connect error and won't reconnect until I reboot the phone.
I did all the troubleshooting steps with T-Force: factory reset, got a new SIM card, got an update sent to the SIM card twice, factory reset again, and no dice.
Is anyone else experiencing this on 10n?
Click to expand...
Click to collapse
Are you using xposed? I am experiencing same while xposed is installed and it works perfect without...
jamesd1085 said:
Are you using xposed? I am experiencing same while xposed is installed and it works perfect without...
Click to expand...
Click to collapse
I'm using xposed and it works great (wi-fi calling).
gerald410 said:
I'm using xposed and it works great (wi-fi calling).
Click to expand...
Click to collapse
Not the case for me and others are trickling in with the same issue
So I rooted my phone a little more than a week ago and then flashed MicroMod777's rooted stock 10n ROM a few days later. Up until this point, WiFi calling was working. I then flashed the Xposed framework v72, downloaded some modules, and installed them. I realized that WiFi calling was no longer available and would give me the classic REG99 error, unable to connect. Another user on MicroMod777's 10n stock ROM thread (http://forum.xda-developers.com/tmo...m-g4-h811-10n-stock-rooted-rom-t3188858/page9) had the same problem, though another user responded that Wifi calling was working fine with the 10 ROM and Xposed v72.
I uninstalled Xposed and I could immediately access WiFi calling, so it seems that Xposed is conflicting with the 10n stock ROM's WiFi calling. Same results with v73. Users who are getting WiFi calling to work on Xposed, did you get the official 10n update OTA or flash a rooted ROM? And what version of Xposed are you running?
Synchronicities said:
So I rooted my phone a little more than a week ago and then flashed MicroMod777's rooted stock 10n ROM a few days later. Up until this point, WiFi calling was working. I then flashed the Xposed framework v72, downloaded some modules, and installed them. I realized that WiFi calling was no longer available and would give me the classic REG99 error, unable to connect. Another user on MicroMod777's 10n stock ROM thread (http://forum.xda-developers.com/tmo...m-g4-h811-10n-stock-rooted-rom-t3188858/page9) had the same problem, though another user responded that Wifi calling was working fine with the 10 ROM and Xposed v72.
I uninstalled Xposed and I could immediately access WiFi calling, so it seems that Xposed is conflicting with the 10n stock ROM's WiFi calling. Same results with v73. Users who are getting WiFi calling to work on Xposed, did you get the official 10n update OTA or flash a rooted ROM? And what version of Xposed are you running?
Click to expand...
Click to collapse
Stocked rooted rom and v72 I believe (how to confirm?).
gerald410 said:
Stocked rooted rom and v72 I believe (how to confirm?).
Click to expand...
Click to collapse
Open the XPosed Installer app and look in the Framework section.
jamesd1085 said:
Are you using xposed? I am experiencing same while xposed is installed and it works perfect without...
Click to expand...
Click to collapse
I was having the issue on a totally stock, factory-reset phone with nothing installed.
T-Force opened a ticket with network engineering, supposed to be resolved by tomorrow.
siraltus said:
Not XPosed's fault at all. I was having the issue on a totally stock, factory-reset phone with nothing installed.
Click to expand...
Click to collapse
Just asking as i have same issue but only with xposed...as are some others
jamesd1085 said:
Just asking as i have same issue but only with xposed...as are some others
Click to expand...
Click to collapse
Interesting.... I wonder why. I have Xposed installed on my Note 4 also and WiFi Calling works perfectly fine there. Might be a specific module causing it.
Come to think of it, when I factory-reset the phone, Xposed was still installed into the system partition, since it's not an app, but a modification to system files.
I will have to re-test after explicitly uninstalling Xposed. It would be a total bummer if Xposed is the problem. And if it is, I hope it's just a specific module that I can disable. I'd hate to lose YouTube AdAway and a few others.
siraltus said:
Interesting.... I wonder why. I have Xposed installed on my Note 4 also and WiFi Calling works perfectly fine there. Might be a specific module causing it.
Come to think of it, when I factory-reset the phone, Xposed was still installed into the system partition, since it's not an app, but a modification to system files.
I will have to re-test after explicitly uninstalling Xposed. It would be a total bummer if Xposed is the problem. And if it is, I hope it's just a specific module that I can disable. I'd hate to lose YouTube AdAway and a few others.
Click to expand...
Click to collapse
Mine is broken without even adding modules...fixes instantly after flashing xposed uninstaller
jamesd1085 said:
Mine is broken without even adding modules...fixes instantly after flashing xposed uninstaller
Click to expand...
Click to collapse
Well that just sucks. I just uninstalled Xposed and WiFi Calling is staying connected now. This is not good.
siraltus said:
Well that just sucks. I just uninstalled Xposed and WiFi Calling is staying connected now. This is not good.
Click to expand...
Click to collapse
Looks like we need to try and get some logs for rovo and hopefully he can easily fix it...
Scrap that! Download SELinux mode changer and change to permissive...instantly popped up and stayed connected! Great news
jamesd1085 said:
Looks like we need to try and get some logs for rovo and hopefully he can easily fix it...
Scrap that! Download SELinux mode changer and change to permissive...instantly popped up and stayed connected! Great news
Click to expand...
Click to collapse
O RLY... is that an Xposed module?
siraltus said:
O RLY... is that an Xposed module?
Click to expand...
Click to collapse
Try ticking disable resource hooks in exposed installer app...and You can google SELinux mode changer its an app it coonects after boot...takes longer than it used to but its working on my end
siraltus said:
Open the XPosed Installer app and look in the Framework section.
Click to expand...
Click to collapse
I'm running v71 thx.
jamesd1085 said:
Try ticking disable resource hooks in exposed installer app...and You can google SELinux mode changer its an app it coonects after boot...takes longer than it used to but its working on my end
Click to expand...
Click to collapse
Nope, neither works. WiFi Calling is still busted while Xposed is installed.
siraltus said:
Nope, neither works. WiFi Calling is still busted while Xposed is installed.
Click to expand...
Click to collapse
Try unticking disable hooks...it's working fine without that...try a couple reboots...mine has settled in and works fine...also did you opeen the app and grant root and press permissive?
jamesd1085 said:
Try unticking disable hooks...it's working fine without that...try a couple reboots...mine has settled in and works fine...also did you opeen the app and grant root and press permissive?
Click to expand...
Click to collapse
Of course I granted root and pressed Permissive, I know what SELinux is. I also unticked that checkbox and rebooted like 5 times. It either never connects or connects and disconnects after 2-3 minutes.
Im rooted running PureNexus latest build with Magisk 12 (core only mode). Weird battery issue only Bluetooth and screen showing in usage. This happened before when i had magisk and supersu installed and removing supersu solved it. Why is it back? Any thoughts?
jwrezz said:
Im rooted running PureNexus latest build with Magisk 12 (core only mode). Weird battery issue only Bluetooth and screen showing in usage. This happened before when i had magisk and supersu installed and removing supersu solved it. Why is it back? Any thoughts?
Click to expand...
Click to collapse
Hit the trash can in your picture to reset the logs. Put it on the charger, reboot and charge to 100%. It'll probably go away.
Thanks, I'm gonna do right now. Will give results when up 100%.
Nope, same issue. I have to go back to playing with magisksu and root issues.
jwrezz said:
Nope, same issue. I have to go back to playing with magisksu and root issues.
Click to expand...
Click to collapse
Have you turned off instant tethering in settings -> google?
I think that was it. New flash in June and it's on again! Thank you. Let ya know after a restart.
Yeah, we're all good. Thanks!
I have Oneplus 3t with 7.1.1 android. Only issue I am having is that if I turn Notification light on, there is no option to turn battery full, charging, and low notifications off. With them on i cant use the light at all, because it will light up my whole bedroom. I red from online that Light Flow is the best app that could have sleep time without notifications etc. but when i tested it, it could not turn those charging lights off. Is there some way to bybass this? Never seen issue like this before. I am not sure is it just bug that disable option is missing or such. I have been using this feature since 2013 with nexus 4 so unbelivable its missing from this.
It seems custom rom is only way to fix the problem, but what is stable enough for daily use? If I could fix this issue on normal rom I could use it for years, because there is nothing that i am missing or what i would need more from my phone.
If you don't want to change ROM, you can use Xposed and GravityBox, unless you use Android Pay or other SafetyNet protected apps
przemcio510 said:
If you don't want to change ROM, you can use Xposed and GravityBox, unless you use Android Pay or other SafetyNet protected apps
Click to expand...
Click to collapse
I have rooted phone already because of adway. Can you give some help about how? I have no clue how those works.
HTC Tytn user 188 said:
I have rooted phone already because of adway. Can you give some help about how? I have no clue how those works.
Click to expand...
Click to collapse
Are you rooted with SuperSU or Magisk? If the latter, then you can download Xposed through the Magisk Manager, then install Xposed Manager and GravityBox app.
GB has the feature to control LED for all apps, unfortunately the free version is limited to 50 reboots (full version costs about 4 USD).
przemcio510 said:
Are you rooted with SuperSU or Magisk? If the latter, then you can download Xposed through the Magisk Manager, then install Xposed Manager and GravityBox app.
GB has the feature to control LED for all apps, unfortunately the free version is limited to 50 reboots (full version costs about 4 USD).
Click to expand...
Click to collapse
I am rooted with SuperSU so what is the way to go?
HTC Tytn user 188 said:
I am rooted with SuperSU so what is the way to go?
Click to expand...
Click to collapse
If I were you, I would dirty flash current ROM (install it on top of currently installed without removing data), install Magisk and then proceed.
przemcio510 said:
If I were you, I would dirty flash current ROM (install it on top of currently installed without removing data), install Magisk and then proceed.
Click to expand...
Click to collapse
Is there any rom that would contain this automaticly without needing to do those things?
I have messed up my whole phone every time I have tried to update, because of the encryption. I am pretty sure that dirty flashing will mess up once again. Last time I tried magisk It did not work for some reason so i had to install supersu instead, because i allways need to root for adblock.
The second thing i hate in this phone is the constantly coming reminder that there is update avaible. With going to custom rom or such i could get rid of that problem too.
HTC Tytn user 188 said:
Is there any rom that would contain this automaticly without needing to do those things?
Click to expand...
Click to collapse
I don't think so and even there are such ROMs, and I wouldn't depend on them. Consider doing a clean flash and/or another ROM.
HTC Tytn user 188 said:
I have messed up my whole phone every time I have tried to update, because of the encryption. I am pretty sure that dirty flashing will mess up once again. Last time I tried magisk It did not work for some reason so i had to install supersu instead, because i allways need to root for adblock.
Click to expand...
Click to collapse
The encryption is most likely not an issue, at least I didn't have any problems with it.
HTC Tytn user 188 said:
The second thing i hate in this phone is the constantly coming reminder that there is update avaible. With going to custom rom or such i could get rid of that problem too.
Click to expand...
Click to collapse
This is the nature of stock ROMs, unfortunately, but you should be able to hide this type of notification (long-press on it and disable the notification, but it's not always possible).
przemcio510 said:
The encryption is most likely not an issue, at least I didn't have any problems with it.
Click to expand...
Click to collapse
When i got phone and updated and rooted it i managed to get it not to recognise anything meaning soft bricked. Then time went by and i decided to update phone when I was told the root will stay, but then encryption once again soft bricked everything. Never seen **** like that on any phone so I did not know there is such thing. Just one step more to make things harder.
Now I am wondering does that encryption mess things up today when i will install paranoid 7.3.1. Atleast i put up fastboot etc. ready on my computer so it will be easier to fix.
HTC Tytn user 188 said:
Now I am wondering does that encryption mess things up today when i will install paranoid 7.3.1. Atleast i put up fastboot etc. ready on my computer so it will be easier to fix.
Click to expand...
Click to collapse
It is said that one should format data when migrating from OOS to custom ROM.
HTC Tytn user 188 said:
Is there any rom that would contain this automaticly without needing to do those things?
I have messed up my whole phone every time I have tried to update, because of the encryption. I am pretty sure that dirty flashing will mess up once again. Last time I tried magisk It did not work for some reason so i had to install supersu instead, because i allways need to root for adblock.
The second thing i hate in this phone is the constantly coming reminder that there is update avaible. With going to custom rom or such i could get rid of that problem too.
Click to expand...
Click to collapse
clean flash nitrogen os - best rom
change settings for battery light or notification light in the priority mode
https://photos.app.goo.gl/mfnxvTF9mlhjbdDO2 (screenshot for more info)
Hey,
dumb question, does anybody have problems with loosing already bonded devices over night/hours?
I just reinstalled and rootet (AP with magisk [but no TWRP]) my device and slightly debloated it (by hand). So far so good.
But every couple hours it forgets the paired devices (Car Radio and Galaxy Gear).
Does anybody have an idea or at least a hint how i can monitor what is going to happen?
thx in advance
Matt
I'm a little bit further. Every time when i disable BT, the device emptys the config.
I found the bt_config.conf file. But the system does not seem to refer to it. Because when i back it up and restore it to the original path the BT does not connect.
So, does anyone knows where/who's the initial Config file.
thx in advance
Install the libsecure_storage magisk module from ianmacd. That should fix it.
AMEN!!!! Thx, thats it.
Can you describe what it does?
Donkeykong307 said:
Install the libsecure_storage magisk module from ianmacd. That should fix it.
Click to expand...
Click to collapse
zero5liters said:
Hey,
dumb question, does anybody have problems with loosing already bonded devices over night/hours?
I just reinstalled and rootet (AP with magisk [but no TWRP]) my device and slightly debloated it (by hand). So far so good.
But every couple hours it forgets the paired devices (Car Radio and Galaxy Gear).
Does anybody have an idea or at least a hint how i can monitor what is going to happen?
thx in advance
Matt
Click to expand...
Click to collapse
I have the exact same problem. My S10+ keeps forgetting already connected BT Devices since I rooted it. I'm gonna try that libsecure_storage Magisk module.
I am suffering from this on my plus, does anyone know which section the "Install the libsecure_storage magisk module" is located on forum?
Best wishes
Wingchundub said:
I am suffering from this on my plus, does anyone know which section the "Install the libsecure_storage magisk module" is located on forum?
Best wishes
Click to expand...
Click to collapse
If you havent found the forum you could try this alternative:
https://forum.xda-developers.com/ga.../zip-libbluetooth-patcher-fix-losing-t4017735
Thank you, But unfortunately it not work
It came up with :- Updater process ended with ERROR 1
Hello, I have the following problem, the operating system and the Greenify application worked very well on Magisk v22.1, but after updating to v23.0, there are problems, the operating system itself on the phone is slow and in the Greenify application, I am dissatisfied with this update v23.0 .
Please help what can be done about it.
My HTC U11, Stock ROM.
Greetings.
Noticed this on my Pixel 3 running stock as well. I would have to restart the phone several times to get it running.
GrandAdmiral said:
Noticed this on my Pixel 3 running stock as well. I would have to restart the phone several times to get it running.
Click to expand...
Click to collapse
I understand it turns out there is a problem with this v23.0 update, I wonder who else has a problem with it, besides us.
I'm not seeing any similar issues on v23 (and haven't on the canary releases leading up to it either). That doesn't mean there isn't a possible issue though...
Have you guys checked your modules if there's a possible culprit there?
Didgeridoohan said:
I'm not seeing any similar issues on v23 (and haven't on the canary releases leading up to it either). That doesn't mean there isn't a possible issue though...
Have you guys checked your modules if there's a possible culprit there?
Click to expand...
Click to collapse
I only have these modules and they were on v22.1, they did not cause any problems like this v23.0.
That the modules worked fine in earlier releases doesn't necessarily mean that they work on current/future release...
You need to do some troubleshooting if you're interested in getting to the bottom of this.
Disable modules to figure out if it's one of those. Disable MagiskHide to see if it's connected to that. Etc...
Didgeridoohan said:
That the modules worked fine in earlier releases doesn't necessarily mean that they work on current/future release...
You need to do some troubleshooting if you're interested in getting to the bottom of this.
Disable modules to figure out if it's one of those. Disable MagiskHide to see if it's connected to that. Etc...
Click to expand...
Click to collapse
It may be that the module may not work properly on this v23.0.
Okay, I will follow your suggestion on what to do with it, I'll check it out and let you know.
From the very beginning, MagiskHide is turned off.
MagiskHide off, module turned off, Riru, Riru - Edxposed, phone restart, phone working, fast as it was on v.22.1, probably something is wrong with these modules.
Sounds like EdXposed is causing some issues then... You might want to check the Xposed forums and/or EdXposed Github issues to see if there's some mention of similar problems there.
Didgeridoohan said:
Sounds like EdXposed is causing some issues then... You might want to check the Xposed forums and/or EdXposed Github issues to see if there's some mention of similar problems there.
Click to expand...
Click to collapse
I will check the forums, maybe I will come across something, and if not, I will also write a post there, maybe a new update of these modules will fix something.
Thanks for your interest in the topic.