Hello,
I have an issue with a P9 that I'm hoping has a work around. As of now there is no rom on it because I am unable to install one. Before this happened I updated to the Nougat 7.0 with the emui 5.0. I flashed the wrong version so I attempted to wipe and reinstall stock to no avail.
I have access to recovery between stock and TWRP. The bootloader is unlocked. I have attempted to flash stock with the dload method but always gets stuck on 5% and fails. When I try to flash with TWRP I get the cust "invalid argument" error. I have attempted to extract the files from the update.app and flash with fastboot but when I get to cust.img I get an error:
C:\platform-tools>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (257481 KB)...
OKAY [ 8.301s]
writing 'cust'...
FAILED (remote: partition error)
finished. total time: 8.316s
I tried this method of restoring the cust partition and I receive an d error saying that there is not enough space.
https://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769/page2
My last resort was to attempt to wipe the cust partition but I receive "command not allowed"
At this point I'm unsure what else to do. Does anyone have any other ideas on how to restore the cust partition?
Just though I'd let you know that this was a newbie mistake.... For future reference, When you attempt the dlaod method DISCONNECT the usb from the computer or it will either hang or fail. My phone is back up and running )
do you still have the cust.img ?
Hey,
I think I might have bricked my phone.
Whenever I want to instal my recovery fiile it keeps saying "Cannot mount /cust"& /vendor
I've tried almost anything I can think of. I've tried the dload method but it keeps giving me error about the firmware not being supported or so.
I've manually tried to flash the cust.img through adb :
PS C:\adb> fastboot flash recovery cust.img
target reported max download size of 471859200 bytes
sending 'recovery' (361698 KB)...
OKAY [ 12.789s]
writing 'recovery'...
FAILED (remote: partition error)
finished. total time: 12.815s
PS C:\adb>
I wiped everything and tried to instal a stock B381 firmware but no luck also.
Any help would be appreciated
Hola compañero, prueba esto.
https://forum.xda-developers.com/showpost.php?p=66570915&postcount=11
But where it says
mmcblk0p23
Change it to
mmcblk0p44
Besides. instead of using the sdcard partition, which is the internal memory, I advise you to do it from the external memory. So don't forget to trade one for the other on the command line.
My advice is that if you have TWRP installed you do it from the terminal of that recovery.
With VENDOR, the command line I used is the following
dd if=/external_sd/VENDOR.img of=/Vendor
I used the CUST and the VENDOR extracted from the B103 version, so if you don't have it I advise you to download it, and extract what you need from that version with Huawei Extractor, if everything works out well, I recommend that the first thing you do is, reinstall the official recoveries, and with the method of the 3 buttons, install that same version (Vie-l09B103C432), that in case your P9 is an L09 and you are in Rom international, if it is another version, you have to look for the files suitable for your terminal.
Good luck.
Translated with www.DeepL.com/Translator
I accidently deleted my boot.img on mi Mi 9 Lite (Mi CC9) by doing: fastboot boot "random file". What can I do now?
Can Someone please send me their boot.img or a link?
..
realseal3 said:
..
Click to expand...
Click to collapse
https://www.sendspace.com/file/nddami
:fingers-crossed:
Thank you very much but I get an error message:
Sending 'boot.img' (15360 KB) OKAY [ 0.332s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
realseal3 said:
Sending 'boot.img' (15360 KB) OKAY [ 0.332s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
Click to expand...
Click to collapse
What's the rom you have, miui version?
miui_PYXISGlobal_V11.3.3.0.PFCMIXM_6a3205a4b8_9.0
I have this one but it didn't boot before I did anything.
lmt399 said:
What's the rom you have, miui version?
Click to expand...
Click to collapse
realseal3 said:
miui_PYXISGlobal_V11.3.3.0.PFCMIXM_6a3205a4b8_9.0
I have this one but it didn't boot before I did anything.
Click to expand...
Click to collapse
Bootloader unlocked/locked?
Maybe it is better to flash the whole system through fastboot or mi flash tool.
..
It didn't work with the tool but I reflashed twrp and flashed the stock miui rom from there and it worked. Thank you anyway.
Download Fastboot rom and extract, then copy system.img to fastboot folder and also recovery, boot.img too...
Open fastboot:
Type: fastboot format system
Type: Fastboot flash boot boot.img version that you have when you brick device
Type: Fastboot flash system system.img
Type: Fastboot flash recovery recovery.img use wzsx1050 3.3.1-0709 version
Type :Fastboot boot recovery.img and device should reboot in recovery, without Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
Lineage 17.1 for the Sony Xperia 10 II
Please note this is currently for the dual-sim model ONLY. When you need a single-sim variant leave a comment, so we can work an that...
Code:
/*
* Disclaimer - your warranty may be void.
*
* I'm not responsible for bricked devices, dead OTGs or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
OTA updates - always delayed for 1 day (to prevent broken rollouts); when you want it immediately, checkout my GitLab pipelines
Increased volume steps to 25
Over-provisioned system image (580MiB), to allow install of OpenGApps and other stuff
Open Source (it is based on SODP, you can view all my patches and ci scripts here or here)
Package signature spoofing (needed by MicroG)
What does not work?
Stock camera app with wide and zoom cameras, you may use Open Camera to circumvent that.
Notification LED blinking - kernel driver bug (see here)
LiveDisplay
You tell me...
Download
There you have multiple options:
To get the complete package (both including the ota and imgparts; only needed for the initial setup) visit...
AndroidFileHost
GitLab (make sure to download the artifacts from the master branch)
To get ONLY the OTA package to update your system later on, visit (or open up the LineageOS Updater) ota.simonmicro.de - please note that only the last recent 14 days are accessible there.
Changelog
2021-02-28
Fixed wifi hotspot.
2020-12-18
Fixed cameras.
2020-11-27
Fixed ADB security.
2020-11-25
Added SELinux support.
2020-11-20
Added OpenGApps support.
2020-11-17
Initial release.
How to install your system
The following guide assumes, you have setup adb and fastboot already (make sure to always use the latest version of the toolkit, otherwise you'll may get problems during flashing) - for that take a look into the internet. Also you should already downloaded the complete package from above!
Unlock the bootloader - a "how to" is here...
Download the oem binaries from here, make sure to use exactly that version!
Boot into the bootloader (hold "Volume up + Insert the USB cable" until led lights blue) and then update the oem partition:
Code:
fastboot flash oem_a [EXTRACTED_OEM_IMAGE_FILE]
fastboot flash oem_b [EXTRACTED_OEM_IMAGE_FILE]
Flash now the Lineage recovery partition as well as the dtbo partition (they are inside the img folder of the complete package):
Code:
fastboot flash recovery [EXTRACTED_RECOVERY_IMAGE_FILE]
fastboot flash dtbo [EXTRACTED_DTBO_IMAGE_FILE]
Disable the verity checks for now, as your new recovery violates the Sony verity profiles of the Stock ROM:
Code:
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
Okay, you are now ready to boot the first time into the Lineage recovery, unplug the phone NOW!
To boot into recovery: Hold "Volume down + Power" until it vibrates...
You should now be booted into the recovery. We now clean any old data from Sonys Stock ROM - this is just to make sure you have a really clean install: Choose the "Factory reset" option.
The phone is now clean and ready to accept the new system. You now can either install just the OTA package and be done or flash every .img from the full package manually - the coice is yours. When you plan to flash the images manually, make sure to include boot, system, product, vendor, vbmeta_system, as these are normally part of the OTA update (I extracted the payload.bin to verify this!). For the latter approach you may orient yourself on my flashall.sh. I'll choose the simpler OTA-sideload approach for now.
Select "Apply update -> Apply from ADB" (now make sure the adb server runs as root - may use adb kill-server && sudo adb start-server to fix that) and execute (the OTA zip is inside the ota subdir):
Code:
adb sideload [OTA_SYSTEM_UPDATE_ZIP_FILENAME]
Something went wrong - help!
(Step 7-8) When you now see a device corrupt error
Don't panic!
You messed up the verity disable step from before - try again.
Try to switch the current boot slot (get current fastboot getvar current-slot and set new fastboot --set-active=, you can choose between a and b) and retry disableing verity disable again!
When your device fails to boot too many times (and crashes) the current slot could also get marked as corrupt. To reset that counter you'll need to reflash the boot partition - to see what is going on, try fastboot getvar all and look out for something like a unbootable flag.
(Step 9) When you get Operation not permitted during flashing
This is commonly caused by relocking and then reunlocking the bootloader (yay - buggy firmware). You'll need to relock, restore (and boot) the device with Flashtool using Sonys original ROM and start from fresh.
(Step 10) When you get the kDownloadPayloadPubKeyVerificationError error
Well, that's caused by using an other recovery than the provided one, as I use my own private keys to sign the build the recovery must also know them. Using an other recovery than the one from
the img folder of the complete package will most likely not include them (and when they do - I am in big trouble), and therefore fail. But you are in luck: It seems that the recovery writes
the data to the currently inactive slot and then fails. You could simply switch the system slot like described above!
Want to install Magisk?
Install the Magisk zip like the OTA system update by using adb sideload [MAGISK_FILE_NAME].
Want to install OpenGApps?
Make sure to use the pico-variant, as the system partition is even with over-provisioning really small (as the installer extracts some more stuff on the first boot) - then install the OpenGApps zip like the OTA system update by using adb sideload [OPENGAPPS_FILE_NAME].
Credits
As much I would like, I can't do everything by myself. A huge thank you to...
@MartinX3 for the used local_manifests and his device tree from his LineageOS organization
...the team behind @sonyxperiadev, for their great work (and their kernel sources)!
XDA:DevDB Information
LineageOS 17.1 for pdx201, ROM for the Sony Xperia 10 II
Contributors
Simonmicro, MartinX3
Source Code: https://gitlab.simonmicro.de/android/lineage/lineage-pdx201
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Sony OEM Package
Based On: AOSP
Version Information
Status: Beta
Hey,
as you guys may have already noted, I have stopped the active development phase for this LOS port a while ago. This was caused by me just not having enough time to do everything and additionally maintain a LOS port.
Today I'll upload the last maintenance build to the OTA server and mirrors. Of course I somehow included a little bug, which causes the system to complain about "an internal problem", which seem to be caused by some interaction with the OpenGApps package installer. Now, it is a feature. I'll may post one more update, if I figure this one out.
Nevertheless, I'll shut down the OTA service at 2022-06-01 (see https://status.simonmicro.de) and will then archive all project data. It was a great time to learn many (new/nasty) things about Android and how everything works. I have to say "thank you" to everyone, who supported me and was on board with this project.
See you next time,
simonmicro
-> https://forum.xda-developers.com/t/...r-xperia-10-ii-ota-sodp.4191601/post-86352693 <-
Reserved
First
At last The guide, source code looks great! Will install, check it next
hmm, i flashed everything according to the instructions, but the system still looks the same as Sjll's ROM and there is no updater in settings>system. anyone else getting this?
EDIT: nevermind, all is well, i was on the wrong slot.. : / wish we wouldn't have to deal with this, TWRP+lineage+one slot was perfect. this is not about the ROM though, it's awesome.
bamdadkhan said:
hmm, i flashed everything according to the instructions, but the system still looks the same as Sjll's ROM and there is no updater in settings>system. anyone else getting this?
EDIT: nevermind, all is well, i was on the wrong slot.. : / wish we wouldn't have to deal with this, TWRP+lineage+one slot was perfect. this is not about the ROM though, it's awesome.
Click to expand...
Click to collapse
- you made my day. Now I know which ROM you used before
No serious: Did you follow the guide step-by-step or did you altered it in some way (maybe forgot to reboot after switching slots) - as it should normally flash both slots (when using ota), even when not you should be at least on the right slot after flashing?!
Simonmicro said:
- you made my day. Now I know which ROM you used before
No serious: Did you follow the guide step-by-step or did you altered it in some way (maybe forgot to reboot after switching slots) - as it should normally flash both slots (when using ota), even when not you should be at least on the right slot after flashing?!
Click to expand...
Click to collapse
lol it's easy to know when the ROM in question is the only available aside from yours xd
seriously: i followed all the steps to the letter. flashed the SW binaries on both oem_a and oem_b. really everything.
i have a theory though. i originally flashed your ROM when 'side b' had previously been set active. if this persists across reboots - i really don't know, this whole 'dual ROM' concept is new to me - then there's your answer: the lineage install script probably has a command to use 'side a' for flashing. is completed successfully, but then i went ahead and booted the 'side b', which still had Sjll's ROM on it.
bamdadkhan said:
lol it's easy to know when the ROM in question is the only available aside from yours xd
seriously: i followed all the steps to the letter. flashed the SW binaries on both oem_a and oem_b. really everything.
i have a theory though. i originally flashed your ROM when 'side b' had previously been set active. if this persists across reboots - i really don't know, this whole 'dual ROM' concept is new to me - then there's your answer: the lineage install script probably has a command to use 'side a' for flashing. is completed successfully, but then i went ahead and booted the 'side b', which still had Sjll's ROM on it.
Click to expand...
Click to collapse
Well, I also tested my guide to the letter - and there i saw on my device screen that the ota flashed on both partitions. Did you also used my recovery? When you did: Lets see if others also have that problem... :angel:
Simonmicro said:
Well, I also tested my guide to the letter - and there i saw on my device screen that the ota flashed on both partitions. Did you also used my recovery? When you did: Lets see if others also have that problem... :angel:
Click to expand...
Click to collapse
Great job, thank you. Can I install NikGapp? Or does it also cause bootlaps?
Thapsus-cz said:
Great job, thank you. Can I install NikGapp? Or does it also cause bootlaps?
Click to expand...
Click to collapse
On their website:
Code:
OpenGapps Team (for base package and providing Open Gapps)
Therefore is a really good chance that the installer has the same problems like OpenGApps - but I can't say that for sure, I guess you'll need to try it out (when is does bootloop / never starts, please send me a adb logcat -b all for further diagnostics).
Done till the step 9.
Tried the second way first (flashing images). Please see the log for this below.. Then tried OTA way. OTA way did with 0 exit status (it sent files) but when I boot device it writes "Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds". How to fix?
Also when I load into recovery it writes this:
E: Failed to bind mount /mnt/staging/mulated/media/0 to /storage/emulated: NO such file or directory.
E: emulated failed to bind mount /mnt/stagingemulated/media/0 on /storage/meulated: No such file or directory.
Click to expand...
Click to collapse
See full log for flashing images:
sudo fastboot flash boot boot.img
sudo fastboot flash system system.img
sudo fastboot flash product product.img
sudo fastboot flash vendor vendor.img
sudo fastboot flash vbmeta_system vbmeta_system.img
[sudo] пароль для :
Sending 'boot_b' (65536 KB) OKAY [ 2.441s]
Writing 'boot_b' OKAY [ 0.358s]
Finished. Total time: 2.812s
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.722s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'product' (432072 KB) OKAY [ 16.440s]
Writing 'product' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vendor' (48084 KB) OKAY [ 1.725s]
Writing 'vendor' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vbmeta_system' (4 KB) OKAY [ 0.005s]
Writing 'vbmeta_system' OKAY [ 0.003s]
Finished. Total time: 0.016s
❯ sudo fastboot flash boot boot.img
sudo fastboot flash system system.img
sudo fastboot flash product product.img
sudo fastboot flash vendor vendor.img
sudo fastboot flash vbmeta_system vbmeta_system.img
❯ sudo fastboot flash boot boot.img
sudo fastboot flash dtbo dtbo.img
sudo fastboot flash product product.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash super_empty super_empty.img
sudo fastboot flash system system.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash vbmeta_system vbmeta_system.img
sudo fastboot flash vendor vendor.img
Sending 'boot_b' (65536 KB) OKAY [ 2.438s]
Writing 'boot_b' OKAY [ 0.378s]
Finished. Total time: 2.831s
Sending 'dtbo' (8192 KB) OKAY [ 0.302s]
Writing 'dtbo' OKAY [ 0.046s]
Finished. Total time: 0.357s
Sending 'product' (432072 KB) OKAY [ 16.212s]
Writing 'product' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'recovery' (98304 KB) OKAY [ 3.699s]
Writing 'recovery' OKAY [ 0.557s]
Finished. Total time: 4.265s
Sending 'super_empty' (4 KB) OKAY [ 0.011s]
Writing 'super_empty' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.755s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vbmeta' (4 KB) OKAY [ 0.009s]
Writing 'vbmeta' OKAY [ 0.003s]
Finished. Total time: 0.021s
Sending 'vbmeta_system' (4 KB) OKAY [ 0.003s]
Writing 'vbmeta_system' OKAY [ 0.004s]
Finished. Total time: 0.014s
Sending 'vendor' (48084 KB) OKAY [ 1.770s]
Writing 'vendor' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Click to expand...
Click to collapse
xdauserart said:
Done till the step 9.
Tried the second way first (flashing images). Please see the log for this below.. Then tried OTA way. OTA way did with 0 exit status (it sent files) but when I boot device it writes "Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds". How to fix?
Also when I load into recovery it writes this:
See full log for flashing images:
Click to expand...
Click to collapse
I had the same problem yesterday with the same results. I struggled with it until morning. Eventually I downloaded the latest version of adb, flashed the stock rom again and started over. It was done in twenty minutes. Try the latest version of adb (I guess version 35 for Windows)
xdauserart said:
Done till the step 9.
Click to expand...
Click to collapse
...
Code:
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.722s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
This indicates you tried to use the bootloader (which also has fastboot support) to flash the images. I made sure to write the guide the way that it states you should use the fastbootd service of the recovery. I have the dumb feeling that many more will go your way and fail. Damn it.
Code:
E: Failed to bind mount /mnt/staging/mulated/media/0 to /storage/emulated: NO such file or directory.
E: emulated failed to bind mount /mnt/stagingemulated/media/0 on /storage/meulated: No such file or directory.
Is fine, as you just erased all data - this also kills the partion so it cant be mounted anymore (that's the errors). This is indeed intentional as the system is now forced to really start fresh!
xdauserart said:
Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds"
Click to expand...
Click to collapse
Did you tried the help of my guide? When you failed that and your device rebooted too many times (or it just could not boot and crashed too many times) you'll need to reflash the boot partition to reset the counter (and therefore the failure message).
Two PR to fix back triple cam. But front cam is still broken.
https://github.com/sonyxperiadev/device-sony-seine/pull/29
https://github.com/sonyxperiadev/device-sony-pdx201/pull/15
--------------EDIT-----------------
Switch to CAF powerhal, better performance we have.
https://github.com/sjllls/device-sony-common/commit/de3b2bbbc33130891263d9e81ea2178a0f6783c4
https://github.com/sjllls/device-sony-sepolicy/commit/72059258eb0ff2c854996a05a5a23a8b73b55459
--------------EDIT-----------------
Renmember to let users flash with latest platform-tools, or they could not boot because of logical partition is not resized.
https://developer.android.com/studio/releases/platform-tools
Simonmicro said:
On their website:
Code:
OpenGapps Team (for base package and providing Open Gapps)
Therefore is a really good chance that the installer has the same problems like OpenGApps - but I can't say that for sure, I guess you'll need to try it out (when is does bootloop / never starts, please send me a adb logcat -b all for further diagnostics).
Click to expand...
Click to collapse
I can confirm that Opengapps pico can now be installed without a bootloop. I'm at work and I don't have adb. I installed them directly as an update from the sd card using recovery. Everything works fine.
Can we get OpenGapps Nano support?
I know that OpenGapps pico are supported, but most people use the nano package as it contains some functions that aren't possible to obtain in any other way
so is that possible?
KriiXOne said:
I know that OpenGapps pico are supported, but most people use the nano package as it contains some functions that aren't possible to obtain in any other way
so is that possible?
Click to expand...
Click to collapse
As I already drastically over-provisioned the system partition, I guess it could be possible that the nano package already works: In that case try it for yourself! When it goes wrong you can just switch over to your slot used before flashing the bad OpenGApps zip. Please PN me about your result, so I could extend the guide!
Simonmicro said:
As I already drastically over-provisioned the system partition, I guess it could be possible that the nano package already works: In that case try it for yourself! When it goes wrong you can just switch over to your slot used before flashing the bad OpenGApps zip. Please PN me about your result, so I could extend the guide!
Click to expand...
Click to collapse
I'll try tomorrow after the math test that i'm studying for today, and will let ya know ^^'
Simonmicro said:
...
Did you tried the help of my guide? When you failed that and your device rebooted too many times (or it just could not boot and crashed too many times) you'll need to reflash the boot partition to reset the counter (and therefore the failure message).
Click to expand...
Click to collapse
Fixed it Just repeated the steps from the first one and used OTA on step 9. Thanks!
I searched a lot of articles all flashed to the recovery partition
Code:
>fastboot flash recovery boot_twrp_UNOFFICIAL.img
Sending 'recovery' (65536 KB) OKAY [ 2.062s]
Writing 'recovery' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
I found some information that Android 11 uses Virtual A/B
Do I need to modify boot.img to install custom recovery in Android 11?
AceSheep said:
I searched a lot of articles all flashed to the recovery partition
Code:
>fastboot flash recovery boot_twrp_UNOFFICIAL.img
Sending 'recovery' (65536 KB) OKAY [ 2.062s]
Writing 'recovery' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
I found some information that Android 11 uses Virtual A/B
Do I need to modify boot.img to install custom recovery in Android 11?
Click to expand...
Click to collapse
fastboot boot twrp.img
Go ti advanced and install current twrp
Otherwise u can installiert it temporarly on boot, fastboot flash Boot twrp.IMG
Now you can Boot into it using hardwarebuttons....Herr u can flash it finaly
Did u find a working twrp....this one here doesnt work....also otg mouse not working in that one
bambamGN2 said:
Otherwise u can installiert it temporarly on boot, fastboot flash Boot twrp.IMG
Now you can Boot into it using hardwarebuttons....Herr u can flash it finaly
Did u find a working twrp....this one here doesnt work....also otg mouse not working in that one
Click to expand...
Click to collapse
I use a type-c hub to connect a wireless mouse and it works
I used this command and it didn’t work normally, it will enter the system normally after restart
Code:
>fastboot boot images\boot_twrp_UNOFFICIAL.img
Sending 'boot.img' (65536 KB) OKAY [ 1.735s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
This command can start to TWRP but cannot install it
Code:
>fastboot flash boot_b images\boot_twrp_UNOFFICIAL.img
>fastboot set_active b
>fastboot reboot
Do I still need to unpack boot.img and copy the ramdisk file
AceSheep said:
I used this command and it didn’t work normally, it will enter the system normally after restart
Code:
>fastboot boot images\boot_twrp_UNOFFICIAL.img
Sending 'boot.img' (65536 KB) OKAY [ 1.735s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
This command can start to TWRP but cannot install it
Code:
>fastboot flash boot_b images\boot_twrp_UNOFFICIAL.img
>fastboot set_active b
>fastboot reboot
Do I still need to unpack boot.img and copy the ramdisk file
Click to expand...
Click to collapse
fastboot boot twrp_UNOFFICIAL.img
This work for sure
This topic is great, but I'm afraid many of us would totally miss the information in here, do anyone has the will to turn the information here into a little "how to TWRP" guide as a topic here? That would be awesome!
My device is Redmi Note 10 5G China and the EEA rom flashed. Using twrp will get stuck in the logo and cannot enter.
Before that, I can start twrp using China rom. I'm still looking for reasons
----------
P.S. Does anyone know how to compile twrp for Android 11? I need a little help
AceSheep said:
----------
P.S. Does anyone know how to compile twrp for Android 11? I need a little help
Click to expand...
Click to collapse
No but maybe this helps????
Make A TWRP Tree For Your Device & Build.md
GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
i suggest for now stay on stock recovery. you can root phone installing magisk via fastboot. and the only way to try custom rom is flashing the gsi ported generic rom. the nippon gsi telefram group have a lot of gsi. but my advice is wait miu13 update. most of gsi have audio incompatibility. but if you like aosp roms this is the only way. mtk full custom roms for our device dont exist