Hide Root from Apps e.g. Banking AppsNOTICE (24.11.22): Updated threadInfo: I'm sharing my take on how to get S-Pushtan Banking App to work with Magisk, or any other App of your Choice. (Greatly inspired by searching on the internet)
Works for:- Android 8-12
List of apps known to work:- S-Pushtan, Sparkasse, Sundhedskortet, Keytrade Ban
What you need:- Magisk 25.1
- DenylistUnmount Magisk Module | Download on Github or use shamiko module
- Universal Safetynet Fix Magisk Module | Download on Github
- MagiskHidePropsConfig | Download on Github
- Airfrozen App v1.2.8 | Download on Github
- optional: Yasnac (Safetynet Checker) | Google Play
Pre-Requisites:- Have Magisk 25.1 installed
Step by Step Guide:0. Install Magisk via Recovery and reboot
1. Go into settings of your Magisk Manager and
- enable "Hide Magisk Manager" , type in a name you want for the hidden app.
- open the new app and enable in settings: "Zygisk", then in "Configure DenyList"
- Select any app you want hide root from (for example your banking app)
(Make sure that for every App, all processes are also choosen. If you did everything correctly the colored bar should be full)
1.1.1 Disable "Enforce DenyList"
1.2 Install DenyListUnmount or latest Shamiko Module, Universal Safetynet Fix via Magisk Manager and Reboot to activate the modules
Reboot again.
1.2.1 Check that your Safetynet Status Pass both times via Yasnac App
- If you don't pass the Check, install the MagiskHidePropsConfig Module via Magisk Manager and Reboot to activate the module
- Configure your fingerprint to your phones or a Google Pixel's and reboot again -> do Step 1.2.1
2. Install Airfrozen (grant root permission)
2.1 in Airfrozen: Select your renamed Magisk App and your Banking App (example: Sparkasse, Google Pay)
2.1.1 In Airfrozen: Settings->General->Auto freeze
Enable "Freeze on exit" and "Not Freeze foreground"; Set Freeze on locked to 1 minute;
2.1.2 Optional: If you want a open (also unfreeze) your Magisk Manager/ Banking while they are disabled to use them; longpress the apps in airfrozen und create a shortcut for easy use
2.2 Setup your Banking Apps now, while the MagiskManager is disabled and undetectable.
4. Done!
CHECKLIST:- Magisk installed and Zygisk enabled, App is hidden
- Your Banking App is selected in Airfrozen and XPrivacyLua, and MagiskManagers Denylist
- Your Magisk App is selected in Airfrozen
- Remember the usage rules(below)
IMPORTANT RULES FOR USAGE:1. Always freeze the Magisk App before using your banking App! Vice-Versa
2. In the case that it does get detected -> Force Close your Banking App and clear the cache.
This Method should work with most Apps right now that are detecting root
It's a trial and error situation so try your best, also give some feedback for others as to which apps work and which won't.
I hope this will help some people out there.
Stay healthy!
Thank you very much.
I can confirm this ist working with:
S-PushTAN Version: 3.4.0
Magisk Version: 23.0
Airfrozen 1.6.2 (143)
on latest ArrowOS (Android 11)
Thank you very much.
I can confirm this ist working with:
S-PushTAN Version: 3.4.0
Magisk Version: 23.0
Airfrozen 1.6.2 (143)
on latest ArrowOS (Android 11)
Ice Box is also working fine if you need an alternative.
@sm00th4f3
Thanks a lot, this method also works for these two banking apps
Still a very nice and working workaround
Nice Nice, works on my device!
Xiaomi Redmi Note 8 Pro (begonia)
Android 11 Stock, Miui 12.5.4 Global (RGGEUXM)
Magisk v23
S-Pushtan v. 3.5.1
Can't belive its working. Big Thanks!
Thanks working on rooted pixel 6 pro !! S Pushtan from Starfinance is not detecting Magisk ! Thanks for your work
After completed all the steps, app still complain.
One extra step for me is to also delete the "TWRP official app" (which I decide to randomly installed it back when I rooted my phone)
And citibank app can now open.
Redmi Note 10 pro on MIUI Global 12.5.9 (boot loader unlocked, rooted)
Wappenull said:
After completed all the steps, app still complain.
One extra step for me is to also delete the "TWRP official app" (which I decide to randomly installed it back when I rooted my phone)
And citibank app can now open.
Redmi Note 10 pro on MIUI Global 12.5.9 (boot loader unlocked, rooted)
Click to expand...
Click to collapse
What magisk Version do you use?
I've installed LineageOS on S8 and the S-ID-Check app complains about a rooted device. Now that Magisk Hide isn't available any more (v24.3), is there any other way to make the banking app work?
Edit: updated thread
will it cause any issue if i reboot the phone with magisk frozen ?
naveen_reloaded said:
will it cause any issue if i reboot the phone with magisk frozen ?
Click to expand...
Click to collapse
Nope. You are only freezing the magisk manager app. The root itself is still in place
I have a up to date guide in the works. Stay tuned.
UPDATE: Refreshed the Guide to latest Magisk Stable and with easier instructions... Cheers!
I am using my phone rooted again, as you can probably guess
Not working
I use the Bank Austria App...
Edit: removed list of not working apps
Not working neoBT app (Banca Transilvania Romania).
Dude here is a modified of the module this is working perfectly
https://forum.xda-developers.com/attachments/safetynet-fix-v2-3-1-mod-zip.5670155/
xerel89 said:
Dude here is a modified of the module this is working perfectly
https://forum.xda-developers.com/attachments/safetynet-fix-v2-3-1-mod-zip.5670155/
Click to expand...
Click to collapse
!To everyone: Don't use this. Use the official version.
Related
Magisk Hide (Masking Magisk SuperUser) - 2 Problems w/ Magisk Hide being disabled after reboot or closing Magisk Manager.
If you are using Magisk Manager and Magisk Root and are experiencing difficulty with Magisk Hide (Masking Magisk's SU) not showing in the Manager's side-menu or remembering its status in settings, it occurs when a file is not automatically deleted and removed.
PROBLEM:
Open Magisk Manager, Settings >> Enable Magisk Hide, close Manager, re-open and Magisk Hide is disabled and not visible (hidden) in the left side-menu. i.e. Exit, Close, Stop, Re-Open & Reboot Reset's Magisk Hide's State to Disabled.
SOLUTION 1.
Force stopped Magisk Manager.
Backup then Delete file /data/property/persist.magisk.hide (0600).
Launch Magisk Manager.
Go to Settings >> Enable Magisk Hide.
Go back to Manager home screen. Swipe to reveal side-menu and check Magisk Hide menu is visible.
Close Magisk Manager or Force stop.
Reopen and Swipe side-menu and confirm Magisk Hide is still visible!
I hope this helps others also experiencing issues with Hiding Super User SU. Thanks Shak!
SOLUTION 2.
Another Fix someone else has also posted Dec 2017 was in regards to an error "fopen: /magisk/.core/magiskhide/hidelist failed with 2: No such file or directory"
The issue is due to Magisk Manager being unable to save the list of ticked Apps to hide from SU to /magisk/.core/hidelist.
Check the existence of the "/magisk/.core/hidelist" path.
Create the "/hidelist" directory.
CHMOD "/magisk/.core/hidelist" to 0644.
Thanks to Dunderball. :highfive:
.
Thanks a lot! I have been looking this issue up for almost a week now.
Solution 1 worked for me.
No worries mate. Appreciate the feedback.
Someone else had a similar issue for a few weeks and was unable to resolve it until upgrading to 16.4 beta. But this isn't viable for everyone due to issues w/ 16.4+.
Thanks!
monsterkrusher said:
Thanks a lot! I have been looking this issue up for almost a week now.
Solution 1 worked for me.
Click to expand...
Click to collapse
I would like to add to this thread that this doesn't work anymore with the newer versions of magisk. Eget did work for me though was to delete (and backup of course) /data/adb/magisk.db and then restart
tgcGlaDius said:
I would like to add to this thread that this doesn't work anymore with the newer versions of magisk. Eget did work for me though was to delete (and backup of course) /data/adb/magisk.db and then restart
Click to expand...
Click to collapse
which version you use ?
I use version 19.4, wont work if delete magisk.db.
LineageOs 17 on a Nexus 2013 Flo
Magisk 19.3
Magisk Manager 7.3.2
safetynet always fails after a reboot.
I tried renaming magisk.db and while magisk kept working generally, m-hide still fails the safetynet test after a reboot until I toggle hide.
kevin mitnick said:
which version you use ?
I use version 19.4, wont work if delete magisk.db.
Click to expand...
Click to collapse
michaelh99 said:
LineageOs 17 on a Nexus 2013 Flo
Magisk 19.3
Magisk Manager 7.3.2
safetynet always fails after a reboot.
I tried renaming magisk.db and while magisk kept working generally, m-hide still fails the safetynet test after a reboot until I toggle hide.
Click to expand...
Click to collapse
Download The Module Of MultiFunctions From This Thread https://forum.xda-developers.com/apps/magisk/module-multifunctions-bootloop-t3933386 For Getting The Ability To Use Either The Sub-Function Of Hide Keeper Or Hide Enabler.
Dreamer(3MF) said:
Download The Module Of MultiFunctions From This Thread https://forum.xda-developers.com/apps/magisk/module-multifunctions-bootloop-t3933386 For Getting The Ability To Use Either The Sub-Function Of Hide Keeper Or Hide Enabler.
Click to expand...
Click to collapse
I'll have to try that sometime in the future when I've got more time to experiment. I ended up going back to stock just to have a working tablet. I only use it for maps and streaming and since Netflix wouldn't work...
How to make a bakup?
I am using oneplus 6 with latest oos magisk 19.3
Banking app like sbi anywhere, icici detecting root can't use upi.
Also adadhar app detecting root event safety net pass already done magisk hide
Can some help me there or use other versions of magisk
Please help
android_smater said:
I am using oneplus 6 with latest oos magisk 19.3
Banking app like sbi anywhere, icici detecting root can't use upi.
Also adadhar app detecting root event safety net pass already done magisk hide
Can some help me there or use other versions of magisk
Please help
Click to expand...
Click to collapse
Use Hide Magisk manager in settings or Core only mode.
Sent from my MI 8 using Tapatalk
Dexer125 said:
Use Hide Magisk manager in settings or Core only mode.
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Didn't work either. I guess will have to wait for an update. I have tried so far:
Settings > Magisk Core Only More - On
Magisk Hide - Check against the banking app
Clear app cache
Reboot
Also - Magisk v19.3, Magisk Manager v7.3.1(222)
gagan007 said:
Didn't work either. I guess will have to wait for an update. I have tried so far:
Settings > Magisk Core Only More - On
Magisk Hide - Check against the banking app
Clear app cache
Reboot
Also - Magisk v19.3, Magisk Manager v7.3.1(222)
Click to expand...
Click to collapse
disable developer mode?
and you need to hide magisk manager itself.not just magisk hide.
Try executing
Code:
su -c chmod 000 /proc/net/unix
in a terminal. Several banking apps now use a very stupid and shaky root detection heuristic that is circumvented in this way.
(see https://github.com/Ingan121/UDSBypass).
A banking app on my phone (keytradebank, belgian bank) worked fine with Magisk Hide but after an update stopped working.
Disabling read access to /proc/net/unix did the trick for me!
Looked it up, this rootbeerFresh code is really brain-dead, even the presence of busybox will make isRooted() return true
No concern for false positives at all.
el_perro said:
A banking app on my phone (keytradebank, belgian bank) worked fine with Magisk Hide but after an update stopped working.
Disabling read access to /proc/net/unix did the trick for me!
Looked it up, this rootbeerFresh code is really brain-dead, even the presence of busybox will make isRooted() return true
No concern for false positives at all.
Click to expand...
Click to collapse
Remember that app says it COULD be root.
If anyone is paying attention to it yet.
Also
https://www.didgeridoohan.com/magis...and_other_apps_wont_install_or_doesnt_show_up
Busybox
Some apps detect Busybox and see this as a sign of your device being compromised (rooted). Magisk should be able to hide any Busybox installed as a Magisk module. osm0sis has a great Busybox module available in the Magisk repo (install from the Magisk Manager, under "Downloads").
Figuring out if an app has dependencies, looks for "sensitive props", Busybox, etc
It can be tricky figuring out if an app is dependent on another app or process for detecting root, expects certain prop values, doesn't like Busybox or whatever is triggering a root warning within the app. Apart from trying one thing/prop at a time, finding this out could mean you have to decompile the apk to look at the source code (use search), grab a logcat when the app is detecting root, etc.
Detecting apps requiring root
There are apps that detect known apps that require root and refuse to work properly or even start if that is the case. Usual suspects include (but aren't limited to) busybox apps, Xposed installer, root hiding apps, etc.
This can be worked around by uninstalling or possibly freezing (Titanium Backup can do this, among others) the offending root app when you need to use an app detecting root apps and reinstalling/unfreezing it afterwards. Cumbersome, but it might work. There are also some Xposed modules that can hide apps from other apps, but having Xposed installed might cause other issues with tampering detection...
@mrspeccy Thank you for pointing out that workaround. Works for me too for the Keytrade app
el_perro said:
A banking app on my phone (keytradebank, belgian bank) worked fine with Magisk Hide but after an update stopped working.
Disabling read access to /proc/net/unix did the trick for me!
Looked it up, this rootbeerFresh code is really brain-dead, even the presence of busybox will make isRooted() return true
No concern for false positives at all.
Click to expand...
Click to collapse
How did you do that?
su -c chmod 000 /proc/net/unix didn't work for me.
robuser007 said:
How did you do that?
su -c chmod 000 /proc/net/unix didn't work for me.
Click to expand...
Click to collapse
yes, in a terminal on your phone or using 'adb shell'
be aware it's not a permanent fix, a reboot will restore the old permissions on /proc/net/unix
so you have to remove read access after every reboot.
Quite clumsy.
To make this easier on the go, I installed termux, created in the home directory a small file 'hide' with the one-liner,
Code:
su -c chmod 440 /proc/net/unix
Note: 000 works just as well, but 440 is closer to the original permission and works too.
so after a reboot i open termux terminal and type the command
Code:
. hide
gagan007 said:
Didn't work either. I guess will have to wait for an update. I have tried so far:
Settings > Magisk Core Only More - On
Magisk Hide - Check against the banking app
Clear app cache
Reboot
Also - Magisk v19.3, Magisk Manager v7.3.1(222)
Click to expand...
Click to collapse
Thanks it work...
Got that app working successfully today. Hiding Magisk itself worked I guess. I locked bootloader also.
android_smater said:
I am using oneplus 6 with latest oos magisk 19.3
Banking app like sbi anywhere, icici detecting root can't use upi.
Also adadhar app detecting root event safety net pass already done magisk hide
Can some help me there or use other versions of magisk
Please help
Click to expand...
Click to collapse
Try these...
1. From your magisk, install these 2 modules: Riru - Core, and Riru - EdXposed (Sandbox or Yahfa is okay]
2. Reboot your device to activate both modules.
3. Install Xposed Installer APK by DVDandroid. You can get it here: https://dl-xda.xposed.info/modules/d...v33_36570c.apk
4. Reboot to activate the Xposed Installer app
5. Inside Xposed Installer app, go to downloads and install the HiddenCore Module.
6. Reboot and go back to Magisk, and hide.
7. Test to see if everything is now okay.
wittymav said:
Try these...
1. From your magisk, install these 2 modules: Riru - Core, and Riru - EdXposed (Sandbox or Yahfa is okay]
2. Reboot your device to activate both modules.
3. Install Xposed Installer APK by DVDandroid. You can get it here: https://dl-xda.xposed.info/modules/d...v33_36570c.apk
4. Reboot to activate the Xposed Installer app
5. Inside Xposed Installer app, go to downloads and install the HiddenCore Module.
6. Reboot and go back to Magisk, and hide.
7. Test to see if everything is now okay.
Click to expand...
Click to collapse
Nope! It Doesn't Work With SBI YONO Or BHIM.
My Cofidis app also keeps detecting root.
Have latest version magisk, latest version of magiskmanager and renamed it. Magisk is hidding. App is in magisk hide list.
chmod suggestion did not work
Running latest version of lineageos on my htc u11. I think the issues started when I installed the latest build (11/08).
Any suggestions to fix this?
Same issue here with this app:
https://play.google.com/store/apps/details?id=eu.mobeepass.nfcniceticket
Is there any way to troubleshoot what triggers the root detection?
Ps24u said:
Same issue here with this app:
https://play.google.com/store/apps/details?id=eu.mobeepass.nfcniceticket
Is there any way to troubleshoot what triggers the root detection?
Click to expand...
Click to collapse
Using my app VD INFOS you can see every detectable thing. (Root/Magisk/Xposed/Riru/and others.)
And then you can fix what needs to be fixed.
[APP][v1.10] VD Infos (Package: com.vitaodoidao.vdinfos)
(Para quem fala PORTUGUÊS, o próximo post está totalmente traduzido !) VD Infos v1.10 As we all know, Android is a super powerful and super versatile operating system. What nobody tells you is that all your personal details and confidential...
forum.xda-developers.com
Developers: LSPosed Developers
Homepage: GitHub
✱ Requirements:
• Magisk 21+
• Android 8.1-13
• Riru(NOT NEEDED) USE ZYGISK
Description: Riru module providing ART interception framework (natively for Android Pie) that provides consistent API -interfaces with OG Xposed, using YAHFA (or SandHook) interception environment, supports Android 8.1 ~ 11.
& Installation:
• Install Riru 23+
• Install Riru - LSPosed via Magisk Manager
• Install LSPosed Manager app (Note: No Saparate App and Zip, App Will be Installed Automatically)
• Reboot your device.
Download:
For stable release, please go to Github Release page For canary build use telegram.
Go to second post for latest version Download
Notes:I'm just sharing this from github, I'm not responsible if you bricked your device.
GPay and other banking apps working fine without any issue so this xposed alternative is worth trying and safer.
Note: If anyone facing bootloop issue, don't panic, hard reboot again and it will work.
Screenshot:
Download:
Flash zip file through magisk and then install LSPosed Manager app
Update 1 March 2021
V1.2.0
V1.3.7 Updated 15.May.2021
(Note: No Saparate App and Zip, App Will be Installed Automatically)
For Newer Version Changelogs and Downloads:
LsPosed Github
Changelog
Spoiler: See
Fix manager white screen
[*]Support split-apk modules (LSPosed will choose only one apk with xposed_init to load)
[*]Fix manager crash when launching an uninstalled module from notification
[*]Load modules with SharedMemory (it can speedup app cold launch) 2
[*]New manager icon
[*]Fix incorrect update notification in the first installation
[*]Fix some apps not showing in the scope list in some rare cases
[*]Show notification of module uninstallation
[*]Prevent modules from hooking inner methods (methods from XposedBridge's classloader)
Note:
Previously LSPosed only recognize modules from the primary user. However, this strategy is not good and leads to some problems: some modules require getting installed app lists for configuration but they cannot do so across users; some require reading themselves from the hooked apps but they cannot do so from non-primary users; some users want to configure modules differently on different users which is not feasible previously. Thus LSPosed now requires every module to be installed to the user on which the apps they want to hook are installed. Some devices restrict modules from installing onto some users. In such a case, you can install them from the manager (but it's recommended).
1: For some weird devices that prevent installing apps from the root user, please install the manager from /data/adb/lspd/manager.apk or manager.apk from the zip file manually.
2: Some modules get modules' apk path using reflection of its classloader, it's not recommended and unstable since the apk path from classloader no longer exists when using SharedMemory to load modules. Please use the documented way (from IXposedHookZygoteInit.StartupParam.modulePath) instead.
Reserved 2
Why it's safer than EdXposed?
QkiZMR said:
Why it's safer than EdXposed?
Click to expand...
Click to collapse
I didn't say it's safer than edxposed. I meant xposed alternatives like taichi etc.
All banking apps works, no system slowdown, i got more free ram etc.
In edxposed the hooked apps take time to open, no such issue with LSPosed.
That's why i thought it's worth trying and safer.
And +1 is safetynet passes all the time with LSPosed but, with edxposed safetynet works for some time after every reboot even with blacklisting google framework and services.
This slowdown is caused by YAHFA hook in EdXposed. On Sandhook is much better. Which hook method you use in LSposed?
And +1 is safetynet passes all the time with LSPosed but, with edxposed safetynet works for some time after every reboot even with blacklisting google framework and services
Click to expand...
Click to collapse
SafetyNet works till google patched it no matter which xposed clone you use. Before last patch SN was working fine with EdXposed. I don't needed blacklisting framework and services because EdXposed manager is doing automatically, with special option enabled. So don't say lies about EdXposed but tell us about technical differences between LSposed and EdXposed. What you change after forking EdXposed repo?
looks working good u,till now, just its annoying sometimes to have to choos which app has the module applies. a "select all" option would be welcome in a next release
How do I pass safety net? I have universal safety fix module is installed too.
Antho02 said:
looks working good u,till now, just its annoying sometimes to have to choos which app has the module applies. a "select all" option would be welcome in a next release
Click to expand...
Click to collapse
This is what i was confused about? ive never chosen before. I dont know which ones i need things like HiddenCoreModule to apply to? Everything?
It looks like this xposed clone works only in whitelist mode...
I'm quite amazed that this edxposed alternative is running much better than edxposed itself on my android 11, aosp rom, redmi k30 pro zoom. Really glad that I came across this!
Thanks for the great and awesome work devs!
Preparedtobereckless said:
This is what i was confused about? ive never chosen before. I dont know which ones i need things like HiddenCoreModule to apply to? Everything?
Click to expand...
Click to collapse
Apply to System Framework.
Hidden core module do nothing, try no device check module. BTW safetynet passes for me by default.
darashikoh said:
How do I pass safety net? I have universal safety fix module is installed too.
Click to expand...
Click to collapse
What are LSposed module we can use in A11
Im trying to ask the scope list of my modules. Firefds minminguard hiddencore and hide mock location. Anybody can help for the whitelist ??
what does mean: "select other app for each module" ?
for example for "GravitiyBox" module, which app should be enable and why?!
mrhamed said:
what does mean: "select other app for each module" ?
for example for "GravitiyBox" module, which app should be enable and why?!
Click to expand...
Click to collapse
Android System - android
Call - com.samsung.android.incallui
Camera - com.sec.android.app.camera
Contacts - com.samsung.android.contacts
Email - com.samsung.android.email.provider
Firefds Kit - sb.firefds.r.firefdskit
Messaging - com.samsung.android.messaging
MTP Application - com.samsung.android.MtpApplication
NFC - com.android.nfc
One UI Home - com.sec.android.app.launcher
Settings - com.android.settings
Smart Capture - com.samsung.android.app.smartcapture
Software Update - com.wssyncmldm
System UI - com.android.systemui
It also depends on what firmware you are using amd what features you've enabled in gravity box. Enable these according.
What I've enabled in miui are shown in image below.
a module based selection, what to hook seems a good approach of doing what you want and at the same time saving resources. a more advanced selectiin UI would be good. filter based on words and then select in the filtered list, select deselect all. in addition I have no idea what some modules are hooking like gravity box...this is just an example...I know I can find out however maybe the manager app can support to find out or tick what is recommended
I am trying LSposed on my OnePlus 7 Pro (GM-1917), OOS 10.3.8, Magisk 21.4, xXx 12.4.
I followed these instructions from the OP ...
• Install Riru 23+
• Install Riru - LSPosed via Magisk Manager
• Install LSPosed Manager app
• Reboot your device.
Click to expand...
Click to collapse
I got into what seems to be an infinite boot loop. I waited 3-5 minutes, but the boot loop continued.
Has anyone seen this behavior? If so, is there a workaround?
Thank you in advance.
UPDATE: I must have messed up one or more of the installation steps the first time around. I retried installing, and now LSPosed works for me with no boot loop.
OnePlus 7 Pro (GM-1917)
OOS 10.3.8
Magisk 21.4
Magisk Manager 8.0.7
xXx 12.4
Riru 23.4
LSPosed-v0.5.4.0-5135-release.zip (YAHFA)
LSPosedManager-v0.5.4.0-5175-release-signed.apk
Good work!
Onward!
HippoMan said:
I am trying LSposed on my OnePlus 7 Pro (GM-1917), OOS 10.3.8, Magisk 21.4, xXx 12.4.
I followed these instructions from the OP ...
I got into what seems to be an infinite boot loop. I waited 3-5 minutes, but the boot loop continued.
Has anyone seen this behavior? If so, is there a workaround?
Thank you in advance.
Click to expand...
Click to collapse
Working fine with OnePlus 7t latest beta. There might be some other issue. LSPosed doesn't seem to cause bootloop. Share logcat.
Hi there,
i used Magisk with a hidden Magisk Manager (As "Settings" in the app drawer) and i got a update notification about a new Magisk version. I updated and afterwards i read Magisk Manager is dead and isn't used anymore. When i now click on "Settings" it force closes and i can't open Magisk. What can i do now?
Device is a Oneplus 7t Pro with Stock rom.
Thanks
Try reinstalling magisk through recovery. Works for me on my Pixel 3 running LOS18. 1. Just flash the magisk zip through twrp or whatever you have.
Shouldn't be necessary to hide the magisk app. I have Gpay etc working nicely with the magisk app not hidden. Unless of course there's some other app you're running that won't work without magisk being hidden?
Okay i try to reinstall it but i think i'll wait for Android 12 to come and then start from scratch. Magisk Hide or at least hiding root is necessary for my banking app.
Same happened to me. Oneplus 8T with Android 11.
I have Redmi Note 7.
It was running on xiaomi.eu_multi_HMNote7_V11.0.6.0.PFGCNXM_v11-9. I had magisk installed, there were no problems with root detection.
I installed xiaomi.eu_multi_HMNote7_V11.0.7.0.PFGCNXM_v11-9 using OrangeFox Recovery.
Then my problems with Magisk began. I uninstalled magisk completely via orangefox recovery and install again v21.4 as zip. Finally I updated magisk manager and magisk module with success and now it is latest version 25.2. I can't check safetynet via magisk app, cuz there is no option, so I used app called YSNAC. It shows: Basic integrity: failed, CTS profile match: failed. I perform hide Magisk app, named new app as "Settings", but the old Magisk icon did not disappear (I don't know if it's ok).
I activate Zygisk and enforce deny list and set deny list (banking apps, play services, google play store).
I installed modules like MagiskHide Props Config and Universal SafetyNet Fix.
BTW. Why there is no more online searching modules via magisk manager?
Root working ok.
I don't know what can I do more. My banking apps detects that I have root.
mcichy10 said:
I have Redmi Note 7.
It was running on xiaomi.eu_multi_HMNote7_V11.0.6.0.PFGCNXM_v11-9. I had magisk installed, there were no problems with root detection.
I installed xiaomi.eu_multi_HMNote7_V11.0.7.0.PFGCNXM_v11-9 using OrangeFox Recovery.
Then my problems with Magisk began. I uninstalled magisk completely via orangefox recovery and install again v21.4 as zip. Finally I updated magisk manager and magisk module with success and now it is latest version 25.2. I can't check safetynet via magisk app, cuz there is no option, so I used app called YSNAC. It shows: Basic integrity: failed, CTS profile match: failed. I perform hide Magisk app, named new app as "Settings", but the old Magisk icon did not disappear (I don't know if it's ok).
I activate Zygisk and enforce deny list and set deny list (banking apps, play services, google play store).
I installed modules like MagiskHide Props Config and Universal SafetyNet Fix.
BTW. Why there is no more online searching modules via magisk manager?
Root working ok.
I don't know what can I do more. My banking apps detects that I have root.
Click to expand...
Click to collapse
I have the same issue since today on Galaxy s21 Ultra!
I decided to uninstall completely Magisk. Unfortunately SafetyNet still doesn't pass, banking aps not working. Only thing I can do is wipe all data, format to factory and install MIUI again. Maybe I'll try MIUI 12.
mcichy10 said:
I decided to uninstall completely Magisk. Unfortunately SafetyNet still doesn't pass, banking aps not working. Only thing I can do is wipe all data, format to factory and install MIUI again. Maybe I'll try MIUI 12.
Click to expand...
Click to collapse
try using Shamiko together with Zygisk and without forcing the denylist
I tried this before with zero success
With the MagiskHide Props config, you need to open a terminal, enter "su" and then "props". Then set the fingerprint to the certified one.
neelchauhan said:
With the MagiskHide Props config, you need to open a terminal, enter "su" and then "props". Then set the fingerprint to the certified one.
Click to expand...
Click to collapse
yup, I did that. Didn't work for me.
I performed "Format Data", flashed latest MIUI for my device, installed Magisk, Hided Magisk, activated Zygisk, Forced deny list and it's working well.
i tried like 4 different ways and NONE work
Universal SafetyNet Fix (didnt work)zydisk (didnt work)
denylist (didnt work)
magiskhide proops config (didnt work)
i have a mi 9 with miui 13+android 12
EDIT: it just takes trial and error, had to try a couple of different devices and one that worked for me was mi 9 europe
I can pass safety net on magisk 25.2 . I don't install magisk hide props. I have few things installed and a modified Verison of universal safety fix and I am using zygisk.
Alot times I forget about messages on here . Telegram me if I don't get back to u on @Assassin4Hire
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
Flash this.
Enjoy.
yot2703 said:
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
Flash this.
Enjoy.
Click to expand...
Click to collapse
I tried this workaround in my Samsung SM-G531H with Android 7.1 and I tested it with the previously mentioned YASNAC app, and the SafetyNet Attestation tests (Basic Integrity and CTS profile match) PASSED!
Now, I'm able to use my bank app (BBVA) Thanks.