Related
Hi!
It was a bad idea to flash 356510B0982Axon M RU image (available on Russian zte website) to my ATT ZTE Z999.
Phone bricked and only visible by my PC as QUSB_BULK. Looks like there is a way to restore it, but i need full original working stock ATT image (any version). Does someone can share it?
Found at many places, but all of them wants money I would pay, if it will be 5 but not 25euro
I flashed mine using this[Leakite]ROM_AXON_M_VDF_SDCARD_SOFTWARE_PACKAGE_MR00a and it's not turning on anymore. We need help :crying:
Looks like we need 348010B3014Z999V1.0.0B30.zip
But i can't find it in free access, only payment sites like easy-firmware and grt-dongle
Any idea how we can flash a rom on edl mode?
No ideas for now. But friend of mine works in cellphone service center, he helped me many times to unbrick some devices. For now he is found firmware to restore Chinese axonM, can't find at&t
Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing
BRuTe007 said:
Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing
Click to expand...
Click to collapse
You need the firehose programmer and use parts of that firmware to flash with it
BRuTe007 said:
Ok, i got image... 10$ wasted It really looks like correct AT&T image, but QFIL, MiFlash, QPST, QComDownloadTool (ZTE util) can't flash it
https://drive.google.com/file/d/1n0qjH1vaTQVwckFPizSAMDHrBh6uA8b6/view?usp=sharing
Click to expand...
Click to collapse
... If you can get to edl mode, try those Axon 7 firehose programmers. Since they are the same platform. QFIL should flash this image zip with no problem.
Honami754 said:
... If you can get to edl mode, try those Axon 7 firehose programmers. Since they are the same platform. QFIL should flash this image zip with no problem.
Click to expand...
Click to collapse
Are you sure because im under the impression you can only use the exact specific firehose even if its the same chip i think its hard encoded into the shara protocol it will only except the same firehose but mabye im wrong thats just what ive known
Tried Axon 7 EDL Tool and it's won't work
stopped futher research and replaced MB from broken one that bought on ebay
Anyone attempted to flash this? I just got a new one and I'm scared flashing again. I'm thinking of just buying an At&t prepaid sim just to get the latest update.
tidus1ph said:
Anyone attempted to flash this? I just got a new one and I'm scared flashing again. I'm thinking of just buying an At&t prepaid sim just to get the latest update.
Click to expand...
Click to collapse
No reason to flash it if your axon not bricked. I's a stok ATT version.
BRuTe007 said:
No reason to flash it if your axon not bricked. I's a stok ATT version.
Click to expand...
Click to collapse
The one my phone got is the october 1, 2017 patch with build number Z999V1.0.0B21. So the download file is the newer-ish right? Because on the website the latest is sept 18, 2018 patch with build number Z999V1.0.0B35.
tidus1ph said:
The one my phone got is the october 1, 2017 patch with build number Z999V1.0.0B21. So the download file is the newer-ish right? Because on the website the latest is sept 18, 2018 patch with build number Z999V1.0.0B35.
Click to expand...
Click to collapse
This one was named 348010B3014Z999V1.0.0B30.zip and i think B35 newer then this one.
Here are the Z999 and Z-01K firehose files, extracted from an Internal ZTE tool I have. Hope it helps people out
Z-01K (Japanese Axon M)
https://www.androidfilehost.com/?fid=1395089523397896977
Z999
https://www.androidfilehost.com/?fid=1395089523397896976
All I ask is if you use these files in a guide or anything that you credit me for providing them because i needed to pay to grab these.
deadman96385 said:
Here are the Z999 and Z-01K firehose files, extracted from an Internal ZTE tool I have. Hope it helps people out
Z-01K (Japanese Axon M)
https://www.androidfilehost.com/?fid=1395089523397896977
Z999
https://www.androidfilehost.com/?fid=1395089523397896976
All I ask is if you use these files in a guide or anything that you credit me for providing them because i needed to pay to grab these.
Click to expand...
Click to collapse
Forgive my ignorance. But what does these files do? z999 is the at&t's version right?
tidus1ph said:
Forgive my ignorance. But what does these files do? z999 is the at&t's version right?
Click to expand...
Click to collapse
The firehose is needed to flash the device with QFIL, miflash, etc so a device can be unbricked.
deadman96385 said:
The firehose is needed to flash the device with QFIL, miflash, etc so a device can be unbricked.
Click to expand...
Click to collapse
Tried to flash with Miflash but that failed starts flashing but then says : Cannot Read Port and stops flashing.
Also tried QFIL But also fails with this message : Download Fail:Sahara Fail:QSaharaServer Failrocess fail
hope somone can clarify if its even possible to recover.
this brick happend after update.
Reverender said:
Tried to flash with Miflash but that failed starts flashing but then says : Cannot Read Port and stops flashing.
Also tried QFIL But also fails with this message : Download Fail:Sahara Fail:QSaharaServer Failrocess fail
hope somone can clarify if its even possible to recover.
this brick happend after update.
Click to expand...
Click to collapse
Sounds like you have a driver issue make sure you install the Qualcomm drivers
deadman96385 said:
Sounds like you have a driver issue make sure you install the Qualcomm drivers
Click to expand...
Click to collapse
UPDATE:
figured out what is wrong with QFIL
the Firehose File you send reads only 0 bytes this is why qfil stoped working. might also be the problem with the rest of the flashers i tried.
anycase the elf file in the zip is broken ?
any case you have a .MBN version instat of a .ELF maybe that works ?
Seems im making progress.
im using ToolStudio right now.
the only thing i guess is holding me back is im missing 2 files: RAM and Boot image.
these are not present in the firmware file.
is there anyway i could get them ?
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
wasiur901 said:
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
Click to expand...
Click to collapse
How did you manage to get it in edl test point, could you please post a picture on the pins I've been trying for a week with various pins I haven't been able to identify test points on the mi 9
samouraty said:
How did you manage to get it in edl test point, could you please post a picture on the pins I've been trying for a week with various pins I haven't been able to identify test points on the mi 9
Click to expand...
Click to collapse
Try this if you have not already tried.
https://forum.xda-developers.com/Mi-9/help/want-to-unbrick-mi9-wiht-testpoint-to-t3924267/page2
Good luck
Clarkie_955i said:
Try this if you have not already tried.
https://forum.xda-developers.com/Mi-9/help/want-to-unbrick-mi9-wiht-testpoint-to-t3924267/page2
Good luck
Click to expand...
Click to collapse
Thanks already tried this one no luck i will try again though, did it work work with you? Regarding the authorized account, there is a special nlock tool which i saw some videos that it can bypass the authorization see below link might help you.
httpss://www.google.com/amp/s/romprovider.com/2019/07/download-xiaomi-auth-tool-bypass-authenication/amp/
samouraty said:
Thanks already tried this one no luck i will try again though, did it work work with you? Regarding the authorized account, there is a special nlock tool which i saw some videos that it can bypass the authorization see below link might help you.
httpss://www.google.com/amp/s/romprovider.com/2019/07/download-xiaomi-auth-tool-bypass-authenication/amp/
Click to expand...
Click to collapse
Never tried it. Pretty sure there was a couple of people offering EDL accounts on here with team viewer. Or have a look on Xiaomi eu site .
wasiur901 said:
I managed to hard brick my phone by trying to fastboot flash miui 10 on a miui 11 . So i had to open the back and use test point to get to edl mode. But now i cannot flash it using Miflash without authorized account. Can anybody graciously help me with that? I Thank you
Click to expand...
Click to collapse
I too would very much like to see how you managed to get it in edl test point, so as others here I too would ask you to please post a picture on the pins! Thank you!
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.
otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
How can I do this? Can you help me please?
jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST
Note 8 Pro is MTK Device
Hi friends.
I'm trying to fix both my IMEI, they currently show as empty/null. (I did a full format using SP Flash Tool. Now i know, never do that...)
I'm with TWRP and root installed. I followed every single guide I found reagarding "imei fix", none of them worked.
Most of them rely on a "meta mode", and I'm suspecting my Redmi doesn't have it, only EDL.
ps: if someone got a nvram.bin and nvdata.img I think I can do it myself, with SP Flash Tool.
Any help is highly appreciated
intellq said:
Hi friends.
I'm trying to fix both my IMEI, they currently show as empty/null. (I did a full format using SP Flash Tool. Now i know, never do that...)
I'm with TWRP and root installed. I followed every single guide I found reagarding "imei fix", none of them worked.
Most of them rely on a "meta mode", and I'm suspecting my Redmi doesn't have it, only EDL.
ps: if someone got a nvram.bin and nvdata.img I think I can do it myself, with SP Flash Tool.
Any help is highly appreciated
Click to expand...
Click to collapse
you can't recover both imei. only imei 2 (with Enginner Rom and Modem Meta)
nobody should give you any nvram , nvdata or any partition because that is private and unique info of each phone.
The only thing you can do is going to Xiaomi Service Center ... and don't try to modify a MTK phone again... Cheers !
Long story short, my gf Redmi Note 10 Pro somehow got to MIUI Recovery menu and 3rd party service managed to erase recovery and everything from the phone and gave back the fresh looking brick stuck on Fastboot!!!
I have successfully flashed EEU Sweet ROM (Europe (EEA) latest Fastboot ROM MIUI V12.5.6.0.RKFEUXM) on the Global version though and after that it comes to recovery menu but it shows in red "NV data is corrupted" now I am clueless what to do next. Desperate me tried to flash Global latest Fastboot ROM MIUI V12.5.9.0.RKFMIXM but it gives Anti Rollback error so based on info here https://www.xda-developers.com/xiao...78.2028059671.1642858063-854958160.1642858063 I have checked the Anti_version.txt of the current ROM and the one I try to install and both is on 3 so based on the info I should be able to flash to the same number but it wasn't successful so I tried to edit Flash_all.Bat file and remove the ARB check commands but even after that I still get the ABR error. What should I do? Am I taking a wrong path in solving the issue? Would flashing it again solve the "NV data is corrupted" issue?
I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?
romuser87 said:
I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?
Click to expand...
Click to collapse
Thanks, DLin the tool you mentioned atm but yes I did dl a EU version on global which I read it is no issue as long as it is not on Chinese version. It all started suddenly, out of nowhere the phone rebooted on Fastboot so it was taken to a 3rd party service and their they tried to fix it by wiping the phone to an unrecoverable state and said this is a new model so the files are not yet published you better take it to an authorized service!!!Oh I am mad! I'll report after trying the tool. Btw the other solution you mentioned was the 1st thing I tried but the file in 1st step is removed from the hosting server and someone asked the thread creator to reupload but no reply yet :/
Asgharjoon said:
Thanks, DLin the tool you mentioned atm but yes I did dl a EU version on global which I read it is no issue as long as it is not on Chinese version. It all started suddenly, out of nowhere the phone rebooted on Fastboot so it was taken to a 3rd party service and their they tried to fix it by wiping the phone to an unrecoverable state and said this is a new model so the files are not yet published you better take it to an authorized service!!!Oh I am mad! I'll report after trying the tool. Btw the other solution you mentioned was the 1st thing I tried but the file in 1st step is removed from the hosting server and someone asked the thread creator to reupload but no reply yet :/
Click to expand...
Click to collapse
Ok so now I tried with the tool and interestingly I had to make choices which were not easy and obvious anyhow, it didn't work
It gives the below error and seems to be called "sideload" status issue. But the phone now still reboots on Main Menu with the same old "NV data is corrupted"
romuser87 said:
I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?
Click to expand...
Click to collapse
I could finally flash the latest Global version but the error persists. Accidentally I did flash the phone with clean all and lock ticked Now I cannot even flash anything as bootloader is locked! How can I fix it help please
Here is the wrong selection on MI Flash! Is there anyway to get it unlocked?