[SOLVED]
------------------------ DISABLED AD SOFTWARE ----------------------
Amazon Fire 8 Plus
I have a Windows 7 computer 64 bit system. Toolbox launches, but I cannot select any menu item. I get an "exception error" the moment I try to set the theme, I get this: "Unhandled exception error has occurred in your application. If you click continue, the application will ignore the error and attempt to continue. If you click Quit, the application will close immediately. It also says:
Access to path 'C\Users\some path\Settings.txt' is denied.
When I click continue, the error goes away, and the toolbox menu is still present but does not execute. I try to click menus, or set theme, and it appears to be frozen. The unhandled exception box appears once again, if I try to set the theme.
I have also tried to "Run as Administrator" and it still does not work.
Can someone please help with this issue?
**** DISABLED VIRUS SOFTWARE ****
Related
I get this error:
"An unrecoverable error occurred in setup. Reset the device and try again."
Its version 1.620771.. how come? Can anyone help me on this?
I get this everytime I install. Ignore it. Voice Command should be installed and ready to go once you reset.
the thing is even tho i ignore it, i cant seem to find the program file to start it anywhere.. also startup voicecommand say it cant be opened..
Help please! I've been trying to update my x1 to another rom.
I have been hard-spling for a very long time but i have never encountered this problem.
Whenever I run the hard SPL patch, i keep getting this error on my phone:
An unexpected error has occured in enterbotloader.exe
Select Quit and then restart this program, or select details for more information
An error message is available for this exception but cannot be displayed because these messages are optional and are not currently installed in this device. Please isntall 'NETCFv35.Messages.En.wm.cab' for windows mobile 5.0 and above or 'NETCFv35.Messages.EN.cab' for other platforms. Restart the application to see the message.
Click to expand...
Click to collapse
Then when I click details, this shows up:
enterbotloader.exe
ArgumentNullException
An error message is available for this exception but cannot be displayed because these messages are optional and are not currently installed in this device. Please isntall 'NETCFv35.Messages.En.wm.cab' for windows mobile 5.0 and above or 'NETCFv35.Messages.EN.cab' for other platforms. Restart the application to see the message.
at System.Type.IsSubclassOf(Type c)
at System.Enum.IsDefined(Type enumType,
Object value)
at
Microsoft.Win32.RegistryKey.SetValue(String name, Object value, RegistryValueKind valueKind)
at SSPLSecure.Main.Start()
at SSPLSecure.Program.Main(String[]args)
Click to expand...
Click to collapse
Help Please? I really want to change roms but now im stuck
Help please
Umm.... you only need to install hard-spl once... Then you can flash whatever ROM you want...
Hi.
I have a little problem, WindowsPhone emulator not started from VisualStudio.
When i start debuging the emulator displays with the message 'Windows Phone is Starting'. Times out after about 5 minutes with the following error messages:
Error: DEP6100: The following unexpected error occurred during bootstrapping stage 'Connection to the device':
Error: DEP6200: Bootstrapping Emulator 8.1 WVGA 4 inch(RU)' failed. Device cannot be found. App deployment failed. Please try again.
If run from Hyper-V Manager, it's works fine.
I tried:
- Reinstalled Visual Studio (after removal i cleaning system by CCleaner)
- Reinstalled Hiper-V
- Download and install the Windows Update, VS updates
- Removes all virtual machines in the Hiper-V, and network interfaces
- Turn off the firewall, no antivirals, Windows Defender is turned off (but i haven't viruses)
- Turned off all network interfaces except the Windows Phone Emulator Internal Switch (VS creates when starting the emulator)
- With routes 169.254.xx all right
Help please...
Sorry for my bad english.
eljira said:
Hi.
I have a little problem, WindowsPhone emulator not started from VisualStudio.
When i start debuging the emulator displays with the message 'Windows Phone is Starting'. Times out after about 5 minutes with the following error messages:
Error: DEP6100: The following unexpected error occurred during bootstrapping stage 'Connection to the device':
Error: DEP6200: Bootstrapping Emulator 8.1 WVGA 4 inch(RU)' failed. Device cannot be found. App deployment failed. Please try again.
If run from Hyper-V Manager, it's works fine.
I tried:
- Reinstalled Visual Studio (after removal i cleaning system by CCleaner)
- Reinstalled Hiper-V
- Download and install the Windows Update, VS updates
- Removes all virtual machines in the Hiper-V, and network interfaces
- Turn off the firewall, no antivirals, Windows Defender is turned off (but i haven't viruses)
- Turned off all network interfaces except the Windows Phone Emulator Internal Switch (VS creates when starting the emulator)
- With routes 169.254.xx all right
Help please...
Sorry for my bad english.
Click to expand...
Click to collapse
Make sure you don't have too many NICs, tunneling adapters, or TAPs for OpenVPN installed. My only remedy was to reinstall the whole OS. Hopefully you can find something out.
My temporary solution:
Start XDE manually -
PHP:
XDE.exe /name "Emulator 8.1 WVGA 4 inch(RU).admin"
where param /name is a name of virtual machine in Hiper-V and name emulator in VisualStudio, after it VisualStudio can connect to started emulator.
Hi,
I was give a KF 1st gen to fix. When turned on it says "The application JellyBean 4.2 (process.android.process.acore) had stopped unexpectedly. Please try again.). After clicking Force close the message comes right back up. It appears stuck in an endloess loop.
I have done some reading on here and apparently an incompatible OS version was installed on this thing and I need to bring it back to Factory settings.
I downloaded KFU 0.99 and tried that but run into the following issues:
- executing the install_driver.bat file fails with a message "Cannot complete the Device Driver Installation Wizar". This is on Windows 10. The KF appears to connect OK to the PC though.
- when executing the run.bat file I see the following:
Resetting ADB and Launching KF Utility...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
- the ADB Status says Online, but the Boot Status says Unknown;
- When activating Fastboot, I get a message "couldn't write bp1, panic!"
- When installing FFF it just sits there with a message ...waiting for device...
- For some options, it attempts to download files from random.kennocha.com (108.61.31.89), and that site appears to be down.
I was able to download the Amazon Kindle Fire 6.3.2 stock update.zip file, and copied it to the root of the kindle. I then reset it but that didn't do anything.
Any help appreciated,
Thanks,
Jozef
JozefVdM said:
Hi,
I was give a KF 1st gen to fix. When turned on it says "The application JellyBean 4.2 (process.android.process.acore) had stopped unexpectedly. Please try again.). After clicking Force close the message comes right back up. It appears stuck in an endloess loop.
I have done some reading on here and apparently an incompatible OS version was installed on this thing and I need to bring it back to Factory settings.
I downloaded KFU 0.99 and tried that but run into the following issues:
- executing the install_driver.bat file fails with a message "Cannot complete the Device Driver Installation Wizar". This is on Windows 10. The KF appears to connect OK to the PC though.
- when executing the run.bat file I see the following:
Resetting ADB and Launching KF Utility...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
- the ADB Status says Online, but the Boot Status says Unknown;
- When activating Fastboot, I get a message "couldn't write bp1, panic!"
- When installing FFF it just sits there with a message ...waiting for device...
- For some options, it attempts to download files from random.kennocha.com (108.61.31.89), and that site appears to be down.
I was able to download the Amazon Kindle Fire 6.3.2 stock update.zip file, and copied it to the root of the kindle. I then reset it but that didn't do anything.
Any help appreciated,
Thanks,
Jozef
Click to expand...
Click to collapse
this is the 5th gen forum
please ask here
http://forum.xda-developers.com/kindle-fire
see
[INDEX] Kindle Fire Development
Sent from my KFFOWI using XDA Labs
sd_shadow said:
this is the 5th gen forum
please ask here
http://forum.xda-developers.com/kindle-fire
see
[INDEX] Kindle Fire Development
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
Sorry 'bout that! I reposted it. Feel free to delete this thread. Thanks!
I left my computer to sleep with Android Studio open and this suddenly happens to me now.
Plugin 'org.jetbrains.android' failed to initialize and will be disabled. Please restart Android Studio
I get this error when Android Studio starts and it forces me to restart it. Also, when it does restart, I have a bunch of errors of other plugins telling me that the plugin “Android Support” is disabled. I tried the solution of some StackOverflow answers (which this forum doesn't allow me to post yet) with no avail.
Now, in the menu, under tools, I don't even have the AVD Manager nor the SDK Manager anymore!!!
I am at my workplace getting crazy with this. Please help!!
Thank you