Database Develop

[OFFICIAL] TeamWin Recovery Project 3.3.1 For Zuk Z2 Pro

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/**
* What you do with your device is your choice.
* None of the developers of this software will be held accountable for any damages to your device or to third parties.
* You should know this by now.
**/
What's this?
This is TeamWin Recovery Project for ZUK Z2 Pro (z2_row).
This is an official recovery support thread.
Known Issues
MTP broken in 3.3.0 and newer builds because of a TWRP issue with 4.4 kernel (you can still use adb push and adb sideload)
Requirements
Unlocked bootloader
Common sense and a Z2 Pro
Downloads, changelogs, installation info
All of this info can be found at the official info page.
If you use fastboot to install TWRP, you may have to specify a vendor ID in the commandline, like so:
Code:
fastboot [B]-i 0x2b4c[/B] flash recovery twrp.img
fastboot [B]-i 0x2b4c[/B] reboot
Thanks
@varotone for the initial z2_plus TWRP device tree (and also for the thread template )
@kubersharma for some commits in the device tree
cosmedd for his work on the TWRP tree for z2_row
Frequently Asked Questions
Is this recovery compatible with both treble and non-treble ROMs?
Yes, this recovery is compatible with both non-treble and treble ROMs mounting /factory as vendor (the most updated ones are doing so), while it isn't compatible with the ROMs renaming /factory as /vendor. If the ROM you're using is still using /vendor instead of mounting /factory as vendor, report this to the maintainer and tell them to update.

gg

*Insert some random thx sentence*

I'am using TWRP 3.2.3 since weeks without problems. Is this another version? Why should I use this one?

robert_b said:
I'am using TWRP 3.2.3 since weeks without problems. Is this another version? Why should I use this one?
Click to expand...
Click to collapse
As first because this has the factory mounted as vendor support instead of factory renamed as vendor. If you're already using a build with this support and you downloaded it recently it means that the build is the exact same as this one. I created a thread so that things can get out of Telegram only and also because soon it'll become official (the old one is deprecated pretty much)

Thread updated with the official tag and a new official build on the TWRP.me website. Enjoy

Encryption with latest AEX is not working.

rower19 said:
Encryption with latest AEX is not working.
Click to expand...
Click to collapse
What do you mean with "is not working"? What happens when you try to encrypt?

DD3Boh said:
What do you mean with "is not working"? What happens when you try to encrypt?
Click to expand...
Click to collapse
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!

rower19 said:
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!
Click to expand...
Click to collapse
Hi, sorry for the late answer. Can you pm me on telegram so that we can discuss the issue and I can eventually send you some builds to test? t.me/DD3boh
Thank you!

rower19 said:
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!
Click to expand...
Click to collapse
Checked with @DD3Boh and decryption for pie is working in a test build. He gonna push the new version after some more testing.
But be patient, we will be finally able to encrypt our device and decrypt it in twrp.
Thanks to him,
G0r3t3x

TWRP 3.3.0 just got released
Encryption was fixed, although mtp is broken because of 4.4 kernel (which is a must for encryption)
Instead of mtp you can just use adb push to push files to the internal memory, or either adb sideload <package path> to flash them directly without transferring to the internal storage (works only after having enabled adb sideload in the advanced TWRP tab)
Download link in the first post

Hi, thanks for your work.
I've tried to reinstall baseband but log says it's not installing nothing. Using twrp 3.3.0, i'm on ArrowOS.

A new update has been released! TWRP-3.3.0-1 is present in the website
Changelog:
- Added edl reboot option (download mode)
- Don't wipe data if the command isn't sent by the user
- Sign the build with aosp keys
Go update your recovery

DD3Boh said:
A new update has been released! TWRP-3.3.0-1 is present in the website
Changelog:
- Added edl reboot option (download mode)
- Don't wipe data if the command isn't sent by the user
- Sign the build with aosp keys
Go update your recovery
Click to expand...
Click to collapse
Perfectooo :good:
..btw: what about MTP? ..it works now?

satmaster said:
Perfectooo :good:
..btw: what about MTP? ..it works now?
Click to expand...
Click to collapse
It doesn't work on official builds for some reasons, so I had to disable it
I could though make a build locally where for some reasons it should work fine

I need some help with the Zuk Z2 Pro. I've flashed TWRP 3.3.0.1 and it seemed to work.
However, I'm unable to get the phone detected on my pc in TWRP, or ADB sideload. The phone gets connected while rebooted in system in Zui. Using zuk2pro driver.
I've also not able to mount data.
So i followed some instructions and reformat the partitions, but i forgot the phone could not be detected in TWRP.
I'll like to know if ROMs can be flashed using OTG-USB.

lunloon said:
I need some help with the Zuk Z2 Pro. I've flashed TWRP 3.3.0.1 and it seemed to work.
However, I'm unable to get the phone detected on my pc in TWRP, or ADB sideload. The phone gets connected while rebooted in system in Zui. Using zuk2pro driver.
I've also not able to mount data.
So i followed some instructions and reformat the partitions, but i forgot the phone could not be detected in TWRP.
I'll like to know if ROMs can be flashed using OTG-USB.
Click to expand...
Click to collapse
I tried USB-OTG and it worked. Thankfully.
Can't make any sense out of the driver game.

Sideload isnt working for me either, same as with the previous version, rendering TWRP essentially unusable when running a 4.4 kernel.
Resolve that first please, prior to adding more features. There arent THAT many kernels to choose from.

Dolour said:
Sideload isnt working for me either, same as with the previous version, rendering TWRP essentially unusable when running a 4.4 kernel.
Resolve that first please, prior to adding more features. There arent THAT many kernels to choose from.
Click to expand...
Click to collapse
Probably you don't know why I even switched to 4.4 kernel, which is because 3.18 kernel in TWRP breaks decryption, which is quite an important thing.
Anyway I can build TWRP locally and send a build as that will somehow have mtp and USB in general working.

[RECOVERY][lavender][UNOFFICIAL] TWRP touch recovery for Redmi Note 7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. It's a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
Supports MTP
Support decrypt /data!
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery recovery.img" in command line
5. Reboot and enjoy it
Download:
https://drive.google.com/uc?id=1rp_cgVuk6fsRybN0wDoOTbt_Pc-vOiHx&export=download
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thelazyindian/android_device_xiaomi_lavender-twrp
Note:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
When you flash twrp for the first time in MIUI you need to goto Wipe > Format Data otherwise you won't be able to boot to system as it will ask for password.
GAPPS FIX: In TWRP, goto Mount > system_root and try reflashing.
FAQ:
How is it different from other TWRPs available for lavender ?
This build uses standalone decryption which is better than the recoveries using vold decrypt as vold decrypt will fail if system ROM is corrupt or wiped
Credits:
Huge thanks to @abhishek987 and @vasishath for helping
@tufadorin @faraz shafi (For testing)

Reserved

Work fine with encryption

This is working with Global Variant ? greatz ...

It works well. Just one detail. You can not see the clock, because it appears in the same place as the camera.
Thank you for everything.

Just 5 more days left to test this ?

Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?

Nice built.. I think official build arrives soon

strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.

vkmcondor said:
Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?
Click to expand...
Click to collapse
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact

Enddo said:
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact
Click to expand...
Click to collapse
Do I need to format or wipe data?

great work, just need a few days to unlock my bootloader and try this one

Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?

majo3000 said:
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?
Click to expand...
Click to collapse
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?

Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP

vkmcondor said:
Do I need to format or wipe data?
Click to expand...
Click to collapse
Not if you're just manually updating by flashing the Recovery ROM. Think of it as a dirty flash a custom ROM. Just install it on top of your current build and then flash your Magisk ZIP and any other mods that may have been overwritten (due to needing to patch the boot.img

Diniodoc said:
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?
Click to expand...
Click to collapse
i was first on original rom.then i flashed TWRP from here.after reboot i hang on screen were i have to enter password to access android.so i never have set a password and tryed mi Pin and miui Account password...but none pin was acceptet.
then i wiped data ...reboot ...but android doesnt load.
so i flashed xuaomi.eu Rom . after flashing it .the phone startet succesfully....
the thing is.... i never entered a pin or password to dercrypt my device....and what helped was wipe and flash rom .... greatz..

I am getting error 64 when flashing arm64 gapps.

ebautista said:
I am getting error 64 when flashing arm64 gapps.
Click to expand...
Click to collapse
Why did you even flash gapps?

thelazyindian said:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP
Click to expand...
Click to collapse
Good to know THX. I'm still using original MIUI so I think there is nothing to do than waiting or better use a custom ROM
One more question. Does anybody know if there is the possibility to use a separate password for encryption different from the lock screen? This was possible in earlier versions of Android.

[Official] crDroid 9.0 TISSOT 05-11-19 Security patch

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Feature list https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Rom folder + screenshot -> https://drive.google.com/open?id=1GYVVJ2GVC-MCN-dL84x8Z2uPkhcUd3cY
Instructions :
Backup all before flash!!
Check if you have unlocked bootloader and updated firmware if not download and flash it with twrp and reboot recovery before start flash
https://drive.google.com/open?id=1FfYb6hWviggupkQRBNfE-ah85MSl-1aB
First of all you need to flash or boot @Giovix92 TWRP (I recommend)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-3-1-0-tissot-manager-t3976117
or official twrp
Boot into twrp and factory reset
Flash the rom zip
Flash twrp installer (skip if you use twrp survive option)
Reboot recovery
Flash opengapps nano or pico
If you want to root, flash Magisk
Reboot to System.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES :
You tell me
Some QS theme maybe have color problem but default QS works. Source bug,I can't fix for now
A very special thanks to @Giovix92 and my telegram friends https://t.me/XiaomiMiA1Italia and who tested this rom.
Source
https://github.com/crdroidandroid
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
XDA:DevDB Information
[Official] crDroid 9.0 TISSOT, ROM for the Xiaomi Mi A1
Contributors
samuele94, Giovix92, https://t.me/XiaomiMiA1Italia users for support!
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 9 firwmare (check my profile)
Based On: LOS
Version Information
Status: Stable
Created 2019-10-23
Last Updated 2019-11-28

Goodjob!

Hope 6.0 for 10

Nickinfinity said:
Goodjob!
Click to expand...
Click to collapse
Thanks,I'll keep it updated!
manchirua said:
Hope 6.0 for 10
Click to expand...
Click to collapse
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!

Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.

Good, thanks bro

Sohil876 said:
Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.
Click to expand...
Click to collapse
You're right but I'm learning. I only claim to continue building this rom for my only smartphone because I want to keep an updated rom 9.0. For now the tag isn't essential for me but I'll see what I can do!

Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.

samuele94 said:
Thanks,I'll keep it updated!
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!
Click to expand...
Click to collapse
Yeah, thank you
BTW, i can use MindTheGapps?

manchirua said:
Yeah, thank you
BTW, i can use MindTheGapps?
Click to expand...
Click to collapse
Not tested but why not? you can try,rom works fine with opengapps but i think you can change type of gapps. I like opengapps nano (or pico) but MindTheGapps for arm64 and android 9 should work properly

Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Last i tried all gapps build before 6 oct worked fine so download older than 6 oct release, its not los problem.

Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?

Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Yes you can use latest opengapps nano or pico 9.0 arm64 but if you have problem you can download older version here https://sourceforge.net/projects/opengapps/files/arm64/ gapps are nightly, I don't know if it have bugs/problems
Stealtherthreat said:
Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?
Click to expand...
Click to collapse
Try a good GCam and see if it fix, I don't use this feature sorry
Added on my Gdrive folder changelog about this build. I'll update file after new build,when new build? when I can see difference to previous build!

Hi to all! Rom is now official,check here!
https://crdroid.net/tissot Add Telegram group https://t.me/crDroidA1
Tested today opengapps nano 25/10/19 works perfect and encryption works too

Messed up
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...

teoasv said:
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...
Click to expand...
Click to collapse
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you

samuele94 said:
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you
Click to expand...
Click to collapse
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data

teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.

Sohil876 said:
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.
Click to expand...
Click to collapse
Sorry I don't get what you are saying. I did this:
Open the folder where your TWRP Recovery .img file is saved.
Then open a CMD window inside that folder. To do that, Shift + Right click on any empty white space inside the folder and then select Open command window here.
Connect your Android device to the PC. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If your asks for permission to “Allow USB debugging”, tap OK.
Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp-2.8.x.x-xxx.img
└ Here modify twrp.img with the name of your TWRP recovery .img file.
Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot

teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
Previous version? It's the first version!
Your firmware is up to date? you need to update it and hotboot again twrp,flash installer reboot recovery and follow op step.
No you need to fastboot boot latesttwrp.img boot not flash,for flash you need twrp installer

[ROM][lavender][Android 11] crDroid v7.0 [20.11.2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
Click Here (To be Updated)
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
Update installation:
Boot to recovery
Flash crDroid zip
Flash gapps and reboot to system
Enjoy
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Click Here
Download:
ROM https://crdroid.net/lavender
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/11.0/changelog_lavender.txt
Known issues:
LiveDisplay and Night Light [ Will be Fixed on next update]
Maybe more?
Visit official website @ crDroid.net
crDroid Community Telegram
XDA:DevDB Information
[ROM][lavender][Android 11] crDroid v7.0, ROM for the Xiaomi Redmi Note 7
Contributors
letsmakecakes
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Version Information
Status: Beta
Created 2020-11-19
Last Updated 2020-11-19

Reserved
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .

Reserved

Will there be more Android 10 update?

Is SELINUX Permissive or Enforced?? Do banking apps work without root or not? For example Revolut - can it be installed without Magisk from Google play?

i can't download it
download fails before the end of it

About bugs, I can add a lagging curtain(or statusbar, sorry i dont know how its called on English ). If i turn off blur it become better, but some lags steal here

silmium said:
i can't download it
download fails before the end of it
Click to expand...
Click to collapse
Its a server problem . I tried also with a file downloader, but stoped after 50mb
LE: now download is working perfect

letsmakecakes said:
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .
Click to expand...
Click to collapse
Some animations like scrolling the status bar and opening some applications look a bit laggy.
Besides I'm having several problems with certain google apps (YT and Maps crash, Chrome goes very slow and keeps stucking)

Ok, another bug: if u have password and not the system keyboard, after reboting u cant to enter password cause there is no any keyboard

i finally could download it
but with FIRMWARE Global_V12.0.2.0.QFGEUXM
error 1
i opened the zip file to change updater script and it's working

Flash Required Firmware (First-time only)
Which is the required firmware? Miui 12?
I have right now the Android 9 lineage rom. Can I install this rom from that one of should I install something before?

ruchimes said:
Flash Required Firmware (First-time only)
Which is the required firmware? Miui 12?
I have right now the Android 9 lineage rom. Can I install this rom from that one of should I install something before?
Click to expand...
Click to collapse
if you have a Android 9 rom i guess you have an old firmware too (one for android 9)
so you should flash firmware for android 10 (no fw is labeled android 11 yet)
i guess (i did not try) firmware V11.0.1.0.QFGMIXM should work (just like for crdroid v6.11)
https://xiaomifirmwareupdater.com/firmware/lavender/stable/V11.0.1.0.QFGMIXM/
or you can flash the lastest V12.0.1.0.QFGMIXM like i did but you need to edit the updater file to install the rom
flash also the last recovery !
https://orangefox.download/device/lavender
or
https://dl.twrp.me/lavender/
it's all write down in the first post.....
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware

silmium said:
if you have a Android 9 rom i guess you have an old firmware too (one for android 9)
so you should flash firmware for android 10 (no fw is labeled android 11 yet)
i guess (i did not try) firmware V11.0.1.0.QFGMIXM should work (just like for crdroid v6.11)
https://xiaomifirmwareupdater.com/firmware/lavender/stable/V11.0.1.0.QFGMIXM/
or you can flash the lastest V12.0.1.0.QFGMIXM like i did but you need to edit the updater file to install the rom
flash also the last recovery !
https://orangefox.download/device/lavender
or
https://dl.twrp.me/lavender/
it's all write down in the first post.....
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Click to expand...
Click to collapse
Thanks men, I didn't read the rom firmware required sentence in the bottom.
So, I can download V12.0.1.0.QFGMIXM, but how do I have to change the updater file? What do I need to put in there?
Also another doubt, the xiaomi.eu latest rom would work and provide the required firmware to later install this crdroid? Or should I better install the chinese one?
One more doubt (maybe not the last): do I have to do all the installs from recovery? Or the firmware is better to do it from the compute with XiaoMiFlash?
Thanks a lot

The required firmware is MIUI 11 not 12

letsmakecakes said:
The required firmware is MIUI 11 not 12
Click to expand...
Click to collapse
Can I install xiaomi.eu rom? Or better with global o china?

ruchimes said:
So, I can download V12.0.1.0.QFGMIXM, but how do I have to change the updater file? What do I need to put in there?
Click to expand...
Click to collapse
stick to v11 as it supposed to be :good:
ruchimes said:
Also another doubt, the xiaomi.eu latest rom would work and provide the required firmware to later install this crdroid? Or should I better install the chinese one?
Click to expand...
Click to collapse
eu global chinese fw are the same (except language i guess) i never saw any difference
go for the global firmware cause...it is "global"
ruchimes said:
One more doubt (maybe not the last): do I have to do all the installs from recovery? Or the firmware is better to do it from the compute with XiaoMiFlash?
Click to expand...
Click to collapse
you should ! easier faster less trouble
you never know what could go wrong when you do it with comp (drivers link or else)
but xiaomiflash should"flash xiaomi"s phone (if not what is the point ??)
you have to wipe everything to make a clean install
i don't know if your flash tool dirty flash or clean everything first
with recovery you format the partition or wipe it all and you know you are good to go for a clean intall
ruchimes said:
Can I install xiaomi.eu rom? Or better with global o china?
Click to expand...
Click to collapse
same thing !
so yes !

letsmakecakes said:
This is initial Beta Build . There maybe bugs more than mentioned. Please report as you find one .
Click to expand...
Click to collapse
Also, Wi-Fi tethering seems not working neither in 2.4 GHz nor in 5 GHz

after install storage can't decrypt in recovery
silmium said:
Flashing Instructions:
Pre-installation:
OrangeFox Recovery(Download from here)
Bitgapps(Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Reboot to recovery
Flash Required Firmware (First-time only)
Wipe System/Vendor/Data/Cache if you are coming from Android 10/9 Roms
Format Data Partition
Flash crdroid zip + Gapps
Reboot and profit!
ROM Firmware Required: MIUI 11.0.1 Android 10 Firmware
Click to expand...
Click to collapse
On Android 10 Orangefox v.11 always decrypted the storage with my pin.
After a full clear installation of Android 11, I am unable to decrypt the DATA storage with my PIN (generated when the system first started).
The system is always unlocked with a pin code. But in recovery mode, decryption failed (with this pin code "Password failed, please try again!")

cos10 said:
after install storage can't decrypt in recovery
Click to expand...
Click to collapse
Did you format the data? Because that usually happens when you haven't formatted the data.

chippey5 said:
Did you format the data? Because that usually happens when you haven't formatted the data.
Click to expand...
Click to collapse
Yes. I wiped Dalvik / ART Cache, Cache, System, Vendor, Data.
After this in "Menu" tab /Manage Partition/Data & red button "Format Data"
Maybe need first "Change FS" ext4 to ext4 & then "Format Data"(i will try in new build)?

[ROM][12][OOS CAM] CherishOS 3.4 for OnePlus 8T [OFFICIAL][2022-02-16]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CherishOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. CherishOS is a reborn of pie based Dot-ExtendedOS.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH(for first install) :​1st Method(Recommend):
1. Reboot to bootloader
2. Download Fastboot Enhanced Tool
3. Open it, select your device, reboot to fastbootd
4. Download the ROM zip from sourceforge & extract it and find the payload.bin file inside it.
5. Flash Payload.bin via the tool. Reboot to recovery after you have flashed the rom.
6. Format Data & Reboot to System
2nd Method(Using Sideload):
Note: You can't sideload with any recoveries, only some recoveries support sideloading this rom. I have provided one below
1. Download ROM zip from sourceforge and put it in adb folder
2. Download recovery.img from here
2. Put it in the folder where you have your adb files, and then open a terminal and execute the command
Code:
fastboot flash recovery recovery.img
3. Reboot to recovery
4. Choose "Apply update"
5.
Code:
adb sideload rom.zip
6. Reboot to recovery
7. Factory reset / Wipe all data
8. Reboot system
Dirty Flash(to update):​1st Method(Recommend):
1. Reboot to bootloader
2. Download Fastboot Enhanced Tool
3. Open it, select your device, reboot to fastbootd
4. Download the ROM zip from sourceforge & extract it and find the payload.bin file inside it.
5. Flash Payload.bin via the tool. Reboot to recovery after you have flashed the rom.
6. Reboot to System
2nd Method(Using Sideload):
1. Download ROM zip from sourceforge and put it in adb folder
2. Reboot to recovery
3. Choose "Apply update"
4.
Code:
adb sideload rom.zip
5. Reboot to recovery
6. Reboot system
Download ROM(Gapps)
-Lineage OS
-AOSP
-Pixel Experience
-DotOS
- @1249131356
- @chandu dyavanapelli
- Others who I forgot to mention
Based on Android 12.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
You tell me? (none)
Cherish-OS Source
Kernel Source
Telegram Group
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
​CherishOS for OnePlus 8T
Device: kebab
Maintainer: @Amsal1
Build Type: Official
ROM Kernel: Linux 4.19.225
Based On: AOSP
Android OS version: 12
Security patch level: January 2022
Version Information:
Status: Stable
Current Stable Version: 3.3.5
SELinux Status: Enforcing

Build Info:
- Inbuilt OnePlus OOSCam, Gallery and Dolby
- Oneplus Device Settings with TouchGestures added
- Safetynet passes by default
Screenshots Attached to the post!

Reserved

Amsal1 said:
Build Info:
- Inbuilt OnePlus OOSCam, Gallery and Dolby
- Oneplus Device Settings with TouchGestures added
- Safetynet passes by default
Screenshots Attached to the post!
Click to expand...
Click to collapse
I like the rom, but I don't know why the color of the letters in dark mode are not white, it is in a pink tone and I don't like it, that's why I change the rom, I have tried to modify it but it never goes blank
the only rom that doesn't happen is in the dev one, I don't understand why

Question does face unlock ACTUALLY work because last time I saw a A12 rom say it has face unlock it was a mistake

Can anyone help me? Just got this device and wanted to try some android 12 roms. I was under the impression that oneplus devices would be easy to flash too. However this A/B partition thing is a real pain. Can't get anything flashed and all of the tutorials don't work. Used fastboot enhance, tried ADB sideload (doesn't work, some kind of version doesn't matc client or something) and twrp that I used to use on my other devices is a headache to use

Every a12 rom pretty much has it's own method and recovery to flash with. You just have to do your homework and read the op's for each rom. Do a little research on how a/b partitions work. Nobody will spoonfeed you how to do. If you have problems almost every rom has telegram channel you can ask on?

kjslabber said:
Every a12 rom pretty much has it's own method and recovery to flash with. You just have to do your homework and read the op's for each rom. Do a little research on how a/b partitions work. Nobody will spoonfeed you how to do. If you have problems almost every rom has telegram channel you can ask on?
Click to expand...
Click to collapse
Well I guess that's it for me and modding this device then. I have read countless posts and watched videos and followed them step by step and still no progress. Not looking to be spoon fed, just trying to see if there is something I might me missing

Zekedw said:
Can anyone help me? Just got this device and wanted to try some android 12 roms. I was under the impression that oneplus devices would be easy to flash too. However this A/B partition thing is a real pain. Can't get anything flashed and all of the tutorials don't work. Used fastboot enhance, tried ADB sideload (doesn't work, some kind of version doesn't matc client or something) and twrp that I used to use on my other devices is a headache to use
Click to expand...
Click to collapse
The main thing you need to know for this device regarding A/B is that you need to have the latest firmware from Oneplus on both slots.
Run all your updates and then find the Lineage Wiki for kebab. There is a script there that will copy firmware to both slots so you can start flashing ROMs.

Zekedw said:
Well I guess that's it for me and modding this device then. I have read countless posts and watched videos and followed them step by step and still no progress. Not looking to be spoon fed, just trying to see if there is something I might me missing
Click to expand...
Click to collapse
A lot more involved than just flashing a rom, such as "do you know how to repair you phone when it bootloops?" It will eventually happen. What partitions you should backup before flashing a rom. Sorry, that's just the reality.

kjslabber said:
A lot more involved than just flashing a rom, such as "do you know how to repair you phone when it bootloops?" It will eventually happen. What partitions you should backup before flashing a rom. Sorry, that's just the reality.
Click to expand...
Click to collapse
I have actually repaired it from a boot loop many times. I've been modding and flashing for many years. It's just that this is my first a/b device and despite all the tutorials and research I've done it still hasn't worked. I'm not giving up tho, just wondering what I'm missing. I actually did get a couple roms to work. But I don't know why I'm not getting them to work now. More research I guess...

double tap to wake works while aod is on?

I have many problems trying to install these roms on my phone using sideload or twrp no matter what recovery I use. End up dumping files from payload bin and flashing individual files using fastbootd. Only handful of files to flash, not like oos rom. Almost foolproof. Just make sure you reboot to recovery and format data before booting to system.

GbnrVR said:
Question does face unlock ACTUALLY work because last time I saw a A12 rom say it has face unlock it was a mistake
Click to expand...
Click to collapse
No. I mistakenly wrote face unlock in a hurry which is removed from OP now

kjslabber said:
Every a12 rom pretty much has it's own method and recovery to flash with. You just have to do your homework and read the op's for each rom. Do a little research on how a/b partitions work. Nobody will spoonfeed you how to do. If you have problems almost every rom has telegram channel you can ask on?
Click to expand...
Click to collapse
Yes. That is because A12 latest standards uses a different assert verification process (which is used to detect the device before loading packages into the recovery). TWRP and old recoveries are still using old asserts from A11 standards. I don't like to implement the old assert thus you can either flash using any fastboot installer script or fastboot enhanced. One tester confirmed me that lineage recovery also worked fine for him but I still recommend fastboot installer mode.

Muntasir Mahmud Saif said:
double tap to wake works while aod is on?
Click to expand...
Click to collapse
Yes.

Ivanherrero said:
I like the rom, but I don't know why the color of the letters in dark mode are not white, it is in a pink tone and I don't like it, that's why I change the rom, I have tried to modify it but it never goes blank
the only rom that doesn't happen is in the dev one, I don't understand why
Click to expand...
Click to collapse
Have you tried changing monet colour through Cherish Settings->Themes->Custom Color?
Can you give more details, since I can't reproduce the issue and many of my testers have tested it for days and have no issues with changing monet colours.

Amsal1 said:
Yes.
Click to expand...
Click to collapse
can not find any payload.bin in the folders after extracting

All you need to do is change wallpaper. Color is controlled by wallpaper theme in a12.

Muntasir Mahmud Saif said:
can not find any payload.bin in the folders after extracting
Click to expand...
Click to collapse
Did you download the zip file or md5?