Related
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.
i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.
starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking
glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy
http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.
Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.
I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.
I've installed the in the box screen protector, it will do its job but its cut the same size as the shatter protector so was a nightmare to align without it going off one side but not the other. The application was the hardest of any I've ever applied as the shatter protector attracts dust like a magnet! The edges are already picking up dust so I'm on the lookout for a replacement.
I've got some Terrapin ones from Amazon...anyone tried these yet?
I've a feeling a wet apply protector would be best for this screen, as I'd expect them to be big enough to overlap the edges of the shatter protector.
Sent from my Nexus 7 using Tapatalk 2
LadFromWales85 said:
I've installed the in the box screen protector, it will do its job but its cut the same size as the shatter protector so was a nightmare to align without it going off one side but not the other. The application was the hardest of any I've ever applied as the shatter protector attracts dust like a magnet! The edges are already picking up dust so I'm on the lookout for a replacement.
I've got some Terrapin ones from Amazon...anyone tried these yet?
I've a feeling a wet apply protector would be best for this screen, as I'd expect them to be big enough to overlap the edges of the shatter protector.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I got a pack of these..
http://www.ebay.co.uk/itm/180983297773?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
they are a like a foil and very hard to apply indeed. Ended up with a lot of bubbles but was able to get rid of most of them, only with few where the dust particles settled.
It is very clear and leaves the screen smooth to use. Also they only have the cut for the front cam and does cover the sensor areas whereas the terrapin ones seem not to cover the sensors as well. Ordered a terrapin pack too off Ebay as a comparison.
The Terrapin ones I ordered from Amazon just arrived today (I bought the 10-in-1 pack) and they seem very good so far - the screen no longer attracts dust like a moth to a flame. It was a bit difficult to apply at first (it took me 3 attempts) but I finally got it nice and smooth with only a few bubbles around the edges where I think it lost it's stickiness due to me trying to peel it off again to reapply.
At the price of 10 for £3.49 I'm quite happy with these,
I have too installed the in box screen protector (above the anti shattering film) on my T
Now i am looking for a fingerprint-proof film
Sony japan sell various films (glossy, matte, fingerprint, privacy) but unfortunately it's for their "GX" (same as TX) model
Any one heard about this brand ?
http://www.bodyguardz.com/screengua...-skins-films.html?dir=asc&order=sort_priority
I am more interrested by the figerprint-proof part and wouldnt like the screen to become fuzzy because of the Antiglare
Doesn't the phone come with a factory screen protector? Mine looks like it has one. I received a screen protector with my Incipio case, but didn't put it on since it looked like mine had one already. Didn't know if that would affect the screen sensitivity.
I think the phone come with a preinstalled anti-shattering film. (but it's a little confusing since there is no mention to that in the manual or box)
It can act as a screen protector too, but you can put another one above if you want to keep it in mint condition.
I have absolutely no sensitivity problem with the factory film + protection film
crmb said:
I have too installed the in box screen protector (above the anti shattering film) on my T
Now i am looking for a fingerprint-proof film
Sony japan sell various films (glossy, matte, fingerprint, privacy) but unfortunately it's for their "GX" (same as TX) model
Any one heard about this brand ?
http://www.bodyguardz.com/screengua...-skins-films.html?dir=asc&order=sort_priority
I am more interrested by the figerprint-proof part and wouldnt like the screen to become fuzzy because of the Antiglare
Click to expand...
Click to collapse
drew1129 said:
Doesn't the phone come with a factory screen protector? Mine looks like it has one. I received a screen protector with my Incipio case, but didn't put it on since it looked like mine had one already. Didn't know if that would affect the screen sensitivity.
Click to expand...
Click to collapse
crmb said:
I think the phone come with a preinstalled anti-shattering film. (but it's a little confusing since there is no mention to that in the manual or box)
It can act as a screen protector too, but you can put another one above if you want to keep it in mint condition.
I have absolutely no sensitivity problem
Click to expand...
Click to collapse
Yes, all xperia phones (Correct me if i am wrong) come with a factory fitted protector. And the first thing you should do is take it off and dont bother with them
IMO the protctors get sctatched very easilly and atract dust, whist the bare screen is very durable and looks cleaner.
I dont use a case and keep my phone in my pocket with car keys, house keys and loose change. The screen never gets scratched. And I have done that on my x10, my neo and now my T.
Disclaimer, if you take the protector off and then drop a working diamond tipped drill onto it and it scratches the screen, thats not my fault
So you think the factory installed "supposedly shatter-proof film" is meant to be removed before use (if you didnt like it) ?
like on my xperia s e my tablet s , i took it off on my XT and is so smooth ... the glass feel is 100times better then the plastic and the screen is sharper .. the screen protector preinstalled is so thick...
gregbradley said:
I dont use a case and keep my phone in my pocket with car keys, house keys and loose change. The screen never gets scratched. And I have done that on my x10, my neo and now my T.
Click to expand...
Click to collapse
I'm glad you mentioned this. Has your Xperia T attracted particles underneath the camera or the gap between the display and corners while in your pocket? It may be too early to tell, but it seems all phones are prone with the issue.
gregbradley said:
Yes, all xperia phones (Correct me if i am wrong) come with a factory fitted protector. And the first thing you should do is take it off and dont bother with them
Click to expand...
Click to collapse
so the issue I have is the feel of the screen with the think layer on it (not the free protector in the box or the other you can buy and apply).
So I too would be tempted to peel, but who else has done this.
Glass would indeed feel better.
Hey all,
A little headsup I found an awesome screen protector. Thought I'd post it as theirs been an influx of "MASSIVE SCREEN SCRATCH" Threads.
This screen protector is military grade, does NOT scratch.
The only downside (could be an upside for some) is that it requires soapy water for install.
I have this screen protector and can not tell you how happy I am !!!
Check it out here
Once applied, all bubbles disappear within about 24 hours. Once its fully dried and bubbles are gone, its virtually invisible !!
It feels lovely to touch, you can feel it but its not a nasty feel like some of the other protectors. Almost the same sort of feel as an Xtreme Guard, but less rubbery !
If you want any more info feel free to ask.
Wilks3y.
Hi!
I'm planning to buy a screen protector and I might choose this one, can you tell me about how effective it is against fingerprints and smudges?
Well, I have a XtremeGuard screen protector which is also a soapy install screen protector and I must say it's nice. There are some major downsides like smudges and an orange-peel effect which happens if you don't install it correctly (also happens when you do install it correctly, but minor). The only way I can remove smudges off this thing is with water and a micro-fiber cloth which isn't something I carry around with me everywhere. That being said, dry screen protectors are the way too go. They can be cleaned easily (meaning smudges can be removed with your sleeve) and look better when the protector is installed on your device. I've gone through the Zagg Invisible Shield (the one OP posted), XtremeGuard's screen protector, and a normal screen protector and the dry one is the best in my opinion.
Pr3no said:
Hi!
I'm planning to buy a screen protector and I might choose this one, can you tell me about how effective it is against fingerprints and smudges?
Click to expand...
Click to collapse
Hey, it hardly shows any finger prints at all. I've cleaned it once since install (month or two ago) and that was just a wipe with my jumper sleeve. Much better than the others such as the XtremeGuard mentioned below.
Shmi117 said:
Well, I have a XtremeGuard screen protector which is also a soapy install screen protector and I must say it's nice. There are some major downsides like smudges and an orange-peel effect which happens if you don't install it correctly (also happens when you do install it correctly, but minor). The only way I can remove smudges off this thing is with water and a micro-fiber cloth which isn't something I carry around with me everywhere. That being said, dry screen protectors are the way too go. They can be cleaned easily (meaning smudges can be removed with your sleeve) and look better when the protector is installed on your device. I've gone through the Zagg Invisible Shield (the one OP posted), XtremeGuard's screen protector, and a normal screen protector and the dry one is the best in my opinion.
Click to expand...
Click to collapse
Hi, I also have an extreme guard on my HOX and I agree with your comment. However, and this will sound weird, try this:
Rub the finger prints in, with your finger. Untill they are really smudgy and horrible, then get your jumper sleeve and just wipe the smudge fairly hard. I'm telling you this works like a charm and gets rid of all finger prints !!
Do any of you guys use the op3t with no sp? Does it last in a pocket full of keys
I've used mine without a screen protector for a few months now without a problem. Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass. I would not recommend keeping the phone in the same compartment as keys.
Anova's Origin said:
I've used mine without a screen protector for a few months now without a problem. Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass. I would not recommend keeping the phone in the same compartment as keys.
Click to expand...
Click to collapse
What kind of case are you using?
SysAdmNj said:
What kind of case are you using?
Click to expand...
Click to collapse
A thin polycarbonate case, this one to be specific.
I've been using one of my OP3T without a screen protector for a few months now and all is well! =) I'm using a case similar to the one above. My latest one came with a free gel case, but I already bought another polycarbonate case and I wouldn't want the gel one anyway cause you can see all the data through it.
I use a film protector after using my 3t for a few weeks very scratched (minor) can notice massively on certain angles .
Anova's Origin said:
Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass.
Click to expand...
Click to collapse
That is a useful and informative point. It explains why folks (myself included) have noted scratches on Gorilla Glass screens, even though it is supposed be highly scratch resistant.
Personally I've gone back and forth on using a screen protector. Used them religiously for years, having owned smartphones since the old days when most smartphones did not even have Gorilla Glass, and scratches were almost inevitable if you didn't use a protector. Then on my last phone (HTC M8) I actually bought a protector, but didn't get around to putting it on (the appearance of young children in my life having led to massive procrastination of such things!). The screen seemed fine with no protector, and I ended up just leaving it that way. Going on 3 years, and that phone is still fine; although there are some very faint scratches.
On the other hand, my work makes me carry an iPhone (in addition to my personal device). I have an iPhone 6 that got a huge gouge on the GG screen about 2 weeks after receiving it. Admittedly, I don't give a crap about this phone, and often toss the phone in my pocket with keys, in my bag, etc.
So I guess the short story, is that you can go for years without a scratch (as many do). But you can also get a scratch at any time. It's that latter situation, where you end up regretting it, and wish you had a protector. In the end, it's really a judgment call.
My 3T came with a plastic protector already installed. Some folks have reported having a tempered glass protector. I'll probably just leave the plastic one on, until it gets scratched up or peels off (it's already starting to peel away at the corner near the home button), then from there decide if I want to go naked, plastic protector, or a tempered glass one.
Doesnt it come with a screen protector put on already?
I am using the stock plastic screen protector that comes installed. It protects the phone from scratches, so I thing it it very important.
I usually use glass screen protectors because they can save your screen from braking and it is harder to scratch but on the OP3\T it doesn't cover all the screen, and that really annoys me.
Never used a protector on any phone ever. The OP holds up better than most :good: I try to be a bit carefully with keys and such, but I don't really care for scratches. It's a tool, not jewelery...
I use a Spigen neohybrid, but only to hold the metal plate for my car holder. If it weren't for that it'd be completely naked. I also have a dbrand skin on it. But for the looks, not for protection... That stone with red accents is sexy :victory:
HeroPlane said:
I am using the stock plastic screen protector that comes installed. It protects the phone from scratches, so I thing it it very important.
I usually use glass screen protectors because they can save your screen from braking and it is harder to scratch but on the OP3\T it doesn't cover all the screen, and that really annoys me.
Click to expand...
Click to collapse
Lol it annoys you? Really??? Mate I've been using the stock one since 2 months ago. I put it on perfect so it don't bother me...yes it's obviously not a full fit. But quality is crap lol. Screen protector has cracks all over it now going to change it out for a plastic film when I get back home
Sent from my ONEPLUS A3000 using Tapatalk
Took off the built in one in November and have been using my OnePlus 3T with a spigen rugged armor. Phone, screen, and case are all in excellent condition.
I was using it without any protector... but i got disappointed... As i saw some scratches... i use my phone carefully...
I was previously using Lumia 1020 from past two years... Still using it without any protector... Still no scratches in two years...
Whereas in 3t the scratches appeared within a month...
I have also i used iphone without any protector, iphone also did not had any scratches until i went to a beach for holidays... there i got some scratches due to sands...
I will suggest you guys to use protection. I was using a tempered glass aftr seeing the scratches but was not happy with the quality as it was making the screen seemed to be a bit inside also the bezel and screen had greater contrast so the full tempered glass comes like that, making the phone look cheaper..also while using the home button it was not a not satisfactory due to the level difference of the tempered glass and the button.. removed that and installed old school screen guard... Im Happy now
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Thorgoth said:
May i ask if you removed that build in plastic - cheap looking - screen protector? in case you did remove it did you notice if the screen looks better ? f.e. brigher etc? cause i have not yet removed it but i think it dims the screen a bit...
Click to expand...
Click to collapse
I removed it because i really felt the rims when using the gestures from the sides and bottom.
Didn't notice more brightness.
I haven't removed the screen protector yet, the screen must be really hard I damaged the screen protector the first day.
I put my phone in my pocket whilst removing an ATM (legally) and it's just wrinkled the edge , with no damage to the screen at all!
The only screen protectors I've been tempted to get are on eBay and they are tempered glass privacy ones from China to the UK.
I'll update what they are like.
I removed it because i really felt the rims when using the gestures from the sides and bottom.
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
I never managed to have a perfect screen protector. You ALWAYS feel the sides of the screen protector when you slide your finger over it (for example to slide from the curved side or from the top to open the notifications). Apparently I'm overly sensitive for that
lorenzo.pierini said:
I tried 2 types of screen protector.
The first in tempered glass and with curved edges and the second is gel film.
The first is bad because the edges go to touch the cases (which we all use to protect it from falls) causing the uplift of the side edges with consequent loss of touch sensitivity.
The second is much better but it also has the same problems with the covers. I resolved cutting the side edges and the corners of the gel film with a cutter.
Click to expand...
Click to collapse
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
khoaitaychienvn said:
Is the hydro gel bad for the original screen guys? Looked at it several times but don't dare to apply
Click to expand...
Click to collapse
Why are u afraid of? Its like a screen protector but more flexible/gummy. Water is used to apply it on the screen.
don't use screen protectors at all they make you screen get worse but IF YOU NEED ONE hydro gel are weak af and don't do jack **** to protect you phone but make the screen look less worse than temped tempered are the opposite more strong but less visability
The case is the display's primary protection*.
It should be slightly raised on the edge above the display and more so on the top/bottom.
I prefer using a wet apply urethane screen protector as the are easy to place, long lasting and inexpensive.
In 2 years of using the Zizo Bolt case and Gorilla IQ Sheild on my Note 10+ there's been zero damage to the phone in spite of a lot of drop onto concrete. Try as you may, eventually they take the plunge... a good case will save them almost everytime at heights of 2-5 feet onto concrete.
*the screen protector's primary role is protection from sand scratches and then marring protection when dropped. A tempered screen may seem strong but it can directly transfer the force of an impact to the display and break it.
Glass is a witchy substance that sometimes seems to defy the laws of physics. Ask any glazier.
Some of the laws of hydraulics apply to glass. Stress on one point may be transposed to another portion of the panel. If a spot is already under stress or has been stressed, it can fracture with only a small insult.
clockwork.satan said:
Hey guys. I just got my Find X3 Pro and am absolutely loving it so far, but I'm not loving the screen protector that came on it. Has anyone ventured to try any of the tempered glass or TPU ones on Amazon yet?
Click to expand...
Click to collapse
I found some decent ones on MediaDevil here in the UK much better than the standard one!
maxellxl said:
Put a hydrogel and dont put your case on for 2-3 days. After that you should be able to easily put the case on without any risk of hydrogel uplifting.
Click to expand...
Click to collapse
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
blackhawk said:
I usually wait a few hours if it's hot, no issues.
Simply reseating it if it breaks away works well as long as no dust reaches it first. A bit of the attachment solution can be also used.
This type of protectors last me 6+ months and remain almost clear even at 6 months.
The display must be completely lint/dust free though. Wet your clean fingers before touching protector during placement.
What you didn't see... you will see latter
Click to expand...
Click to collapse
The easiest way to avoid dust ("ivisible" one as well) on screen is to go to the bathrom and turn on warm water under the shower/in the bathtub and leave it for 15 min with closed door and window (if you have it). Then go to the bathroom with your phone and apply the screen protector. I can guarantee there will be no dust under.
Well if you need a clear screen protector then you can try gadgetshieldz screen protector. I'm using it on my Find X3 Pro for 3 months now and there are no bubble issues and this goes well with a curved screen.