Hello,
Will changing the CSC using odin trip KNOX? What are the pitfalls? I cannot seem to find any answers to this conundrum?
Thank you in advance.
koloure2211 said:
Hello,
Will changing the CSC using odin trip KNOX? What are the pitfalls? I cannot seem to find any answers to this conundrum?
Thank you in advance.
Click to expand...
Click to collapse
G998U and G998U1 Firmware Links and Flashing Discussion Here
For those who aren't already aware, G998U is the model number of all of the US carrier versions of the S21 Ultra. The G998U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100%...
forum.xda-developers.com
I have read the attached post but still I have questions.
1. My CSC is PLS, can I change to XEO without touching Knox?
2. If I load via Odin xeo on original pls. Do I get OTA or only Odin ramains to update?
3. Most likely only samkey change my CSC but do you know if it impacts my quarantee? Does it support latest firmware?
Thanks a lot for help
Related
Hi Guys ! I purchased my Note9 SM-N960F/DS Exynos in Indonesia. I believe the country code for my CSC is XID and I am planning to change it to XEU.
My question would be as follow:
1.) Is it possible for me to switch to any OXM based ROM (e.g. XEU)?
2.) What kind of problems will I be facing if I were to switch to an OXM based ROM from a non-OXM based ROM?
3.) Will it trip KNOX? I do not plan to root my device.
I'm very new to Samsung. Thanks in advance guys!
My CSC is:
N960FOLE2ARJ1
royalemint said:
Hi Guys ! I purchased my Note9 SM-N960F/DS Exynos in Indonesia. I believe the country code for my CSC is XID and I am planning to change it to XEU.
My question would be as follow:
1.) Is it possible for me to switch to any OXM based ROM (e.g. XEU)?
2.) What kind of problems will I be facing if I were to switch to an OXM based ROM from a non-OXM based ROM?
3.) Will it trip KNOX? I do not plan to root my device.
I'm very new to Samsung. Thanks in advance guys!
My CSC is:
N960FOLE2ARJ1
Click to expand...
Click to collapse
wont trip knox. might loose region specific stuff like samsung pay.
get the correct n960f firmware and flash it with odin.
there are tons of sites hosting the firmwares( Roms as you called them but stock images are referred as firmwares ). there are also other threads to read for doing the procedure without root. some threads also supply direct links to these firmwares. just search and read. you can also use samfir tool 0.3.6 to downlaod when you have the excat model and region codes of the desired files.
Hi there guys, i have an issue and want to ask you what to do. Currently using Galaxy Note 8 with Russian ROM (SER) and now wanna flash Slovakia Pie ROM (ORX) w/ odin.
So i have a question
Will samsung pay work after it?
And also will i lose my KNOX?
crewsfoundary said:
Hi there guys, i have an issue and want to ask you what to do. Currently using Galaxy Note 8 with Russian ROM (SER) and now wanna flash Slovakia Pie ROM (ORX) w/ odin.
So i have a question
Will samsung pay work after it?
And also will i lose my KNOX?
Click to expand...
Click to collapse
SER and ORX are part of the OXM multi CSC. You can flash the OXR but you will stay on SER as it is determined by the country sim card you use, it should not affect Spay.
Knox won't be tripped if you use official samsung filmware, like from sammobile or updato.
Flashing carrier filmware may change the CSC though so make sure it is "unlocked" filmware.
crewsfoundary said:
Hi there guys, i have an issue and want to ask you what to do. Currently using Galaxy Note 8 with Russian ROM (SER) and now wanna flash Slovakia Pie ROM (ORX) w/ odin.
So i have a question
Will samsung pay work after it?
And also will i lose my KNOX?
Click to expand...
Click to collapse
Hi man, did you flash Slovakia PIE?
Is SPay working?
Hello everybody
i bought a gw3 on amazon but it went from east europe. now i want to change csc, but where can i find an update combination file for GW3 SM-R850? or can i use the old combination file with the new firmaware?
Warning!
Old files could be obsolete because can brick SM-R850.
Try to find latest Combination Firmware AND Stock Firmware.
Best Regards
i didn't find it anywhere
Can you check Firmware from your SM-R850?
To identify which Firmware Version is on Device...
Easiest IMHO is to enter this Code:
*#1234#
As example...
http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
R850XXU1BUD1/R850OXA1BUD1
BUD1 seems latest for ITV...
Notify Update
doc.samsungmobile.com
Best Regards
csc: R850OXA1BUA8
Thank you so much for your help
Maybe somebody could help with these files:
COMBINATION-FT55_R850XXU1AUA3.tar.md5
and
R850XXU1BUAB
Maybe B is wrong maybe 8
R850XXU1BUA8
If somebody can share please.
Thanx in advance.
Best Regards
@adfree I am a new member in this Forum. can you please help me to find out a combination file and stock firmware to change region in my Galaxy Watch 3 RM-845F it is now on
AP:R845FXXU1BTH4
CP:R845FXXU1BTH4
CSC:R845FOLB1BTH4
SOFTWARE VERSION R845FXXU1BTH4
Tizen VERSION 5.5.0.1
I am from India and I don't receive any OTA updates.
changed the region from India to Australia by the person who gave me the watch but now I am stuck I have extensively gone through the forums and the net but couldn't find any way to change the region back to India. Any help or leads from your side is much appreciated.
Regards,
adfree said:
Can you check Firmware from your SM-R850?
To identify which Firmware Version is on Device...
Easiest IMHO is to enter this Code:
*#1234#
As example...
http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
R850XXU1BUD1/R850OXA1BUD1
BUD1 seems latest for ITV...
Notify Update
doc.samsungmobile.com
Best Regards
Click to expand...
Click to collapse
Hi,
I'm also looking for R850XXU1BUD1/R850OXA1BUD1.
I'm not quite sure what your example mean, the website doesn't seem to work: http://fota-cloud-dn.ospserver.net/firmware/ITV/SM-R850/version.xml
Mine is currently
AP : R850XXU1ATF3
CP : No Phone
CSC: R850OXA1ATF3
Region : XSP
Why do I lose the ability to auto update?
Thanks,
Hello Everyone,
I'm new here. What brought me to this forum was the issue of not getting OTA updates due to using a model imported from another region. My device's CSC is SPR (sprint) but my local carrier works on it just fine. My problem is better elaborated here in this other post :
https://forum.xda-developers.com/t/question-about-flashing-firmware-from-a-different-region.4043665/
After reading the above thread I decided not to change my firmware to the model firmware for my region as its SoC is Exynos and my phone is Snapdragon. However, I still want to use Odin to upgrade the firmware to Android 11 as I'm still stuck on Android 9 (may 2019 update) and I can no longer bear it.
In the post in the above link, a reply recommended using the USA (USC) CSC, so here's my question,
Would updating with SPR (my current CSC) make my phone unable to work with my local carrier on update completion? or should I just update using USC?
PS: The SPR CSC came with no bloatware, I don't know what the USC CSC will come with.
Service provider info is attached below.
Thanks in advance.
Hi there,
I have a Samsung Galaxy Note 9 SCV40 Japan version phone. The Firmware of this phone is N960FXXS4CSK2, CSC is N960UOYN3CSK2, Bootloader is SCV40KDU1BSK2. As far as I know it is mixed. PDA from Exynox model N960F and CSC from Snapdragon N960U and Bootloader is from phone SCV40 Snapdragon Japan.
How is this possible and how can I update my firmware? Please help???
Go to Samfw and download correct firmware for you model and flash with odin.
From what is posted ,the bootloader is bit1 so OP can flash firmware that is bootloader S1 or U1. If OP flashes any firmware that increases the bootloader number he will not be able to downgrade. So any bit1 firmware will work.
Download Galaxy Note9 SCV40 (KDI) SCV40KDU1BSG5 in Samfw - Samsung firmware download
Galaxy Note9 SCV40 (KDI - Japan) SCV40KDU1BSG5 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Thank you all for your response. To clarify further the issue, I bought the phone in Dubai. The shop told me it is used one but only for short time. Originally the phone was from Japan. It is Galaxy Note 9 Model SCV40, KDDI from carrier "au". At first I didn't know it was from Japan, since in Settings, About Phone, Model number says N960F. I only find out later as I tried to update to Android 10. The firmware on the phone is for Exynos variant. But my phone is Snapdragon. I checked with phone info app and cpu-z to make sure. As I mentioned earlier the phone has mixed firmware. PDA N960F, Bootloader SCV40 (Some people say it is N960J) ???, CSC N960U from Snapdragon USA, code GSA, XAA. As you see it is a bit confusing I need help. Can I update only the PDA N960F to Android 10 by using 5 parts firmware and leave the others (bootloader and csc) as it is? Thanks
Sorry for login mix, It is me. Surmam. Thanks
Additional info, if it helps. When I dial *#1234# this is what comes out.
AP: N960FXXS4CSK2, CP: N960FXXS4CSK2, CSC: N960FOXM4CSK2
Dear butchieboy and Arobase40, how are you? You have been trying to help me. I was hoping that you will find solution for my problem. But you stopped replying. I don't know what I said or did. Did I offended you in some way? If so please forgive me it was not intentional. Saying that I have still not found a solution so please help me.
Thanks and God bless you all.
Surmam said:
Hi there,
I have a Samsung Galaxy Note 9 SCV40 Japan version phone. The Firmware of this phone is N960FXXS4CSK2, CSC is N960UOYN3CSK2, Bootloader is SCV40KDU1BSK2. As far as I know it is mixed. PDA from Exynox model N960F and CSC from Snapdragon N960U and Bootloader is from phone SCV40 Snapdragon Japan.
How is this possible and how can I update my firmware? Please help???
Click to expand...
Click to collapse
I have the same problem here please have you gotten a solution?
Asp Asuadon said:
I have the same problem here please have you gotten a solution?
Click to expand...
Click to collapse
is the phone not working properly?
The phone is working perfectly. I just want to update to Android 10 and possibly root my phone.