Database Develop

How To Guide [Magisk][US/CAN BL Unlock] Root for Galaxy S21 Series (B/N/0/U/U1/W)

Note: this guide copied from topjohnwu's. Original guide here
US/Canada bootloader unlock thread:
here
Before Installing Magisk
Installing Magisk WILL trip KNOX
Unlocking bootloader for the first time will do a data wipe.
Installation
If you already have Magisk installed, it is strongly recommended to upgrade directly via Magisk Manager using the “Direct Install” method. The following tutorial is only for initial installation.
Getting Started
Before you start:
This tutorial assumes you understand how to use adb and fastboot
If you plan to also install custom kernels, install it after Magisk
Your device’s bootloader has to be unlocked
Download and install the latest Magisk app. In the home screen, you should see:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The result of Ramdisk determines whether your device has ramdisk in the boot partition.
Unlocking Bootloader
Unlocking BL on modern Samsung devices have some caveats, so I figure this would be helpful.
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: power off your device and press the download mode key combo for your device (Vol Down + Vol Up) while connected to usb.
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
Go through the initial setup. Skip through all the steps since data will be wiped again later when we are installing Magisk. Connect the device to Internet during the setup.
Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader.
Your bootloader now accepts unofficial images in download mode.
Patching Boot Image
If your device has boot ramdisk, you need a copy of the boot.img
Instructions
Use either Frija or Samloader to download the latest firmware zip of your device directly from Samsung servers.
Unzip the boot.img from AP and copy the file to your device.
Press the Install button in the Magisk card
Choose “Select and Patch a File” in method, and select the stock boot image
Magisk Manager will patch the image to [Internal Storage]/Download/magisk_patched.img.
Copy the patched image to your PC
Flash the patched boot image to your device.
For most devices, reboot into fastboot mode and flash with command:
fastboot flash boot /path/to/magisk_patched.img or
Rename magisk_patched.img to boot.img and use 7zip to make flashable tar of your boot.img
Reboot to download mode. Open Odin on your PC, and flash boot_patched.tar as AP.
Reboot and voila!
Patching AP
Instructions
Use either Frija or Samloader to download the latest firmware zip of your device directly from Samsung servers.
Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5
Press the Install button in the Magisk card
Choose “Select and Patch a File” in method, and select the AP tar file
Magisk Manager will patch the whole firmware file to [Internal Storage]/Download/magisk_patched.tar
Start the installation, and copy the patched tar file to your PC using ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].tar
DO NOT USE MTP as it is known to corrupt large files.
Reboot to download mode. Open Odin on your PC, and flash magisk_patched.tar as AP, together with BL, CP, and CSC (NOT HOME_CSC because we want to wipe data) from the original firmware.
Your device should reboot automatically once Odin finished flashing. Agree to do a factory reset if asked.
Install the Magisk app you’ve already downloaded and launch the app. It should show a dialog asking for additional setup.
Let the app do its job and automatically reboot the device. Voila!
Custom Recovery​Installing using custom recoveries such as TWRP is only possible if your device has boot ramdisk.
Instructions
Download the Magisk APK
Rename the .apk file extension to .zip, for example: Magisk-v2*.*.apk → Magisk-v2*.*.zip. If you have trouble renaming the file extension (like on Windows), use a file manager on Android or the one included in TWRP to rename the file.
Flash the zip just like any other ordinary flashable zip.
Reboot and check whether the Magisk app is installed. If it isn’t installed automatically, manually install the APK.
Thanks
@topjohnwu for magisk and guide, If you appreciate his effort, show some love and support
Donations
https://www.patreon.com/topjohnwu
https://www.paypal.me/topjohnwu

US/Canada devices has no oem unlock toggle!
Unlock service here
How to get OEM Unlock option back for Non US/Canada device?
1. Open the Settings app. Tap on General Management → Date and time.
2. Use the toggle button to disable Automatic date and time.
3. Set date option will be enabled now. Tap on it, and set the date to about 10-20 days earlier.
4. Enable developer options.
4.a Go to your device Settings.
4.b Select ‘About phone’ » tap seven times on ‘Build number’.
└ This will enable Developer options under Settings.
4.c Go back to Settings » scroll down to the bottom and you’ll see Developer options menu.
5. Open developer options (in the Settings app itself), and find the option called ‘Auto update system‘. Use the toggle button to disable it.
6. Now, go back to the main screen of Setting, and then tap on Software update.
7. Disable the option ‘Download updates automatically‘.
8. Tap on ‘Download updates manually‘ option, but it will give you an error because of the wrong date, so it’s fine.
9. Restart the device.
10. Go to Settings > Developer options. The OEM unlock option should be enabled now.

Thank You very much for your awesome work!!

Thanks, but that doesn't apply to the S21

Boomorrow said:
Thanks, but that doesn't apply to the S21
Click to expand...
Click to collapse
Use latest magisk canary, I have rooted my S21 Ultra.

The latest Magisk Canary release (21409) contains the fix needed for the S21 devices, yes (but being a Canary release there are of course other bugs).
But, @afaneh92, since you're just copying @topjohnwu's installation instructions exactly, word for word, wouldn't it just have been easier to link to those instructions and let people know that Magisk Canary releases now can root the S21 Ultra (and maybe also warn people that the Canaries can be buggy)?

Thanks for this amazing valentines gift

thanks - its working

Does this work on all S21+ Ultra variants?

Didgeridoohan said:
The latest Magisk Canary release (21409) contains the fix needed for the S21 devices, yes (but being a Canary release there are of course other bugs).
But, @afaneh92, since you're just copying @topjohnwu's installation instructions exactly, word for word, wouldn't it just have been easier to link to those instructions and let people know that Magisk Canary releases now can root the S21 Ultra (and maybe also warn people that the Canaries can be buggy)?
Click to expand...
Click to collapse
Its not just a copy and paste! I have edited the the guide to suit our S21 series.

afaneh92 said:
Its not just a copy and paste! I have edited the the guide to suit our S21 series.
Click to expand...
Click to collapse
Edited?
These few lines are the only things that do not exactly match John's instructions:
Unzip the boot.img from AP and copy the file to your device.
<Copy of John's flashing boot image instructions>
Rename magisk_patched.img to boot.img and use 7zip to make flashable tar of your boot.img
Reboot to download mode. Open Odin on your PC, and flash boot_patched.tar as AP.
99% of that 1st post is a copy-paste... You should know the rules on this forum. Copying others work, even text, without proper credits is a no-no.
And no: a small "thanks for the guide" isn't proper credits. Be transparent with where you copy stuff from.

Didgeridoohan said:
Edited?
These few lines are the only things that do not exactly match John's instructions:
Unzip the boot.img from AP and copy the file to your device.
<Copy of John's flashing boot image instructions>
Rename magisk_patched.img to boot.img and use 7zip to make flashable tar of your boot.img
Reboot to download mode. Open Odin on your PC, and flash boot_patched.tar as AP.
99% of that 1st post is a copy-paste... You should know the rules on this forum. Copying others work, even text, without proper credits is a no-no.
And no: a small "thanks for the guide" isn't proper credits. Be transparent with where you copy stuff from.
Click to expand...
Click to collapse
Also removed unnecessary instructions!
Thanks for clarification, I will add link to topjohnwu guide and donations

Work hard and I succeeded. Thanks again to the author
Mod Edit : English only !
Google translation :
Work hard and I succeeded. Thanks again to the author,

I recently got a Samsung S21 Ultra 5G from Verizon. I live in the US, and I have read online that the US variants are more difficult to root. The model is SM-G998U, with Snapdragon.
The serial number is R3CR106XBXT, if that helps at all.
The main issue I've been facing is unlocking the bootloader -- it doesn't seem to show up in the Developer Options menu, unfortunately. I am able to enter recovery mode but selecting the option to boot into the bootloader only restarts the phone.
I am able to use ADB in the command prompt, as it detects the phone fine when checking 'adb devices'.
I have tried doing 'adb reboot bootloader' but it only does the same as trying it from recovery mode.
The only other 'mode' that works is Samsung's Download mode' which I think only works with Odin.
Trying 'fastboot devices' during this screen yields no results.
Am I out of luck for trying to get this device rooted?
Thank you!

NuLuumo said:
I recently got a Samsung S21 Ultra 5G from Verizon. I live in the US, and I have read online that the US variants are more difficult to root. The model is SM-G998U, with Snapdragon.
The serial number is R3CR106XBXT, if that helps at all.
The main issue I've been facing is unlocking the bootloader -- it doesn't seem to show up in the Developer Options menu, unfortunately. I am able to enter recovery mode but selecting the option to boot into the bootloader only restarts the phone.
I am able to use ADB in the command prompt, as it detects the phone fine when checking 'adb devices'.
I have tried doing 'adb reboot bootloader' but it only does the same as trying it from recovery mode.
The only other 'mode' that works is Samsung's Download mode' which I think only works with Odin.
Trying 'fastboot devices' during this screen yields no results.
Am I out of luck for trying to get this device rooted?
Thank you!
Click to expand...
Click to collapse
this is exactly what I'm encountering as well. I have the US unlocked version of the s21 ultra. Incredibly annoying - as there's no OEM unlocking option under Dev options. I tried the 'set the date back 7 Days' trick that supposedly makes work. It does absolutely nothing.
I'm dangerously close to returning this phone and going back to my OnePlus 8 pro which was overall much better experience. The 8 pro had way better touch response, much more beautiful screen, and was completely rootable and able to have ROMs.

NuLuumo said:
I recently got a Samsung S21 Ultra 5G from Verizon. I live in the US, and I have read online that the US variants are more difficult to root. The model is SM-G998U, with Snapdragon.
The serial number is R3CR106XBXT, if that helps at all.
The main issue I've been facing is unlocking the bootloader -- it doesn't seem to show up in the Developer Options menu, unfortunately. I am able to enter recovery mode but selecting the option to boot into the bootloader only restarts the phone.
I am able to use ADB in the command prompt, as it detects the phone fine when checking 'adb devices'.
I have tried doing 'adb reboot bootloader' but it only does the same as trying it from recovery mode.
The only other 'mode' that works is Samsung's Download mode' which I think only works with Odin.
Trying 'fastboot devices' during this screen yields no results.
Am I out of luck for trying to get this device rooted?
Thank you!
Click to expand...
Click to collapse
This guide for unlockable bootloader devices, B/N/0 models

I assume this will trip Knox right?

joancolmenares said:
I assume this will trip Knox right?
Click to expand...
Click to collapse
Read the very first bullet, lol

cjrivera04 said:
Read the very first bullet, lol
Click to expand...
Click to collapse
My very very bad... I kinda missed it lol

@afaneh92 By the way, I'm curious: Why have you added the "Patch boot image" section? John's original Samsung instructions only include patching the AP, so I was wondering why you have this section in your text... From what I can see, users are reporting that John's original instructions work just as they should on the S21 devices (as long as you use releases from 21409 onwards).

Samsung Galaxy Tab A 10.1" - SM-T515 / SM-T510 - Root + TWRP - Android 11 - September 8th 2021 Security Update

/*** BEGIN DISCLAIMER ***/
If you follow this procedure and lose every bit of content on your device / end up with a fancy paperweight, I, nor anyone involved with the referenced open source or otherwise licensed projects is responsible. It's all on you, and this will void your warranty. Do not proceed if you don't understand something. Chances are you will have a bad time.
/*** END DISCLAIMER ***/
Hey everyone - my Samsung Galaxy Tab A 10.1" (2019) - SM-T515 - recently applied a security update without my consent (The Samsung Android 11R September 8th 2021 Security update - side note, make sure that you turn off Samsung's push service ), which canned my previous root access. I use server software and internal port forwarding to do... Things on my device, so I needed my root access back.
Here's how I retrieved it, and how I put TWRP in place as my recovery partition in the process.
The Tools
Make sure you have these before you start. Because this is a Samsung device, you'll have to do some things under Windows, like using Frija and Odin (unfortunately).
1.) Frija - Available here - https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
2.) The latest SM-T515 / SM-T510 firmware from Samsung for your device's CSC (if you use the firmware for the wrong CSC code the most common problem that I have seen as a result is typically incorrect partition sizes after flashing, which can be corrected with TWRP). Frija is listed first, because you'll use Frija to get this directly from Samsung.
3.) Some kind of generic tool that you're comfortable with for working with archives. Ideally whatever tool you choose should be able to work with .tar, .gz, and .zip archives for this process. Personally I like 7-Zip on *Nix and Windows, and ZArchiver on Android.
4.) Odin (firmware flash tool by Samsung) - attached.
5.) The latest Samsung device USB drivers for your environment (they're fine as long as they enable both ADB and MTP correctly) - available here https://developer.samsung.com/mobile/android-usb-driver.html
6.) The latest TWRP image for Samsung SM-T5xx devices - available here https://androidfilehost.com/?fid=14943124697586374577 (and attached)
7.) ADB - downloading / installing and using adb are outside the scope of this post. It is available here - https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
8.) The latest Magisk APK file - available here https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk
The Process
0.) Back up your stuff, and remove your SD card if it makes you more comfortable - do whatever you need to do to be comfortable with "I might lose EVERYTHING on this device." If you plan on following this procedure, you should know how to do this, and I'm not going to try to explain it. If you can't get past this part, you should stop while you're ahead and still have a device that boots.
1.) Unlock your bootloader.
2.) Download the most recent firmware package for your device using Frija and extract all of the individual .md5 files which it contains.
2.) Use Odin to flash the most recent firmware to your device, and factory reset / wipe / format partitions and caches until you have a clean device that boots correctly. If your partitions aren't sized properly at this point it isn't something to be too concerned with, as you can correct them later using TWRP.
3.) Turn developer options back on, enable USB debugging, set the default USB configuration to "File Transfer", connect your device to your PC and copy the Magisk APK over to the internal storage of your device.
4.) Remove .md5 from the filename of the AP file that was included in your firmware package from Samsung and extract its contents into its own directory.
5.) Extract the contents of the latest TWRP package for these devices into the same directory where you extracted the individual partition image files contained in the AP file. Overwrite contents in the destination directory as necessary. The TWRP package should contain three files - param.bin.lz4, recovery.img.lz4, and vbmeta.img.lz4 - If there are uncompressed images (.img files) that correspond to the LZ4 compressed images from the TWRP package in the AP file of your firmware package, remove them first. Odin will (understandably) freak out if you try to flash two different images to the same partition in the same flash operation.
6.) Compress the contents of your modified AP directory which now contains the TWRP package's contents into a tar ball on your PC, and then copy it somewhere that Magisk will be able to access it on the Internal storage of your device (the Downloads directory - "/storage/emulated/0/Downloads/" is a good choice).
7.) Copy the latest Magisk APK to your device (again, the Downloads directory is a good choice), and then install it on your device.
8.) Launch Magisk on your device and choose "Install". Be sure to uncheck the "Recovery Mode" option. We don't want to use "Recovery mode" for Magisk's patching process. Even though this is a Samsung device and this would normally be how to proceed, in this case we're using our own custom TWRP recovery partition, and we don't want Magisk to mess with it. So make sure you aren't patching the bootloader or recovery images in unnecessary ways with Magisk.
9.) In Magisk on your device, choose "Select and patch a file" and then choose the AP file that you created and copied to the device which now contains TWRP as its recovery partition.
10). Let Magisk do its patching and when it has completed take note of where the patched file which it generated was written.
11.) Launch a command line / Powershell / Bash terminal where you can perform ADB commands, and issue the command "adb pull "/storage/emulated/0/Download/magisk_patched-23000_xYzXyZ.tar" (replace "XyZxYz" with whatever random sequence of characters that Magisk generated during its patching operations) to use ADB to download the patched AP file from your device.
12.) Power off your device.
13.) Reboot your device into FANCY download mode by holding the volume up and volume down keys simultaneously while inserting a USB cable that is connected to your PC into your device's USB C charger port. Your device should boot as you insert the USB cable and your bootloader should already be unlocked, so when prompted press the volume up button to continue.
14.) Launch Odin on your PC, and choose the BL, CP, CSC, and UserData images from the firmware package that you retrieved from Samsung to flash the corresponding slots in Odin. In the AP file slot, choose the Magisk patched AP file which contains TWRP as its recovery partition which you retrieved previously using ADB.
15.) Start the flash operation in Odin, and wait patiently for it to complete. Stay alert, because if you left "Auto reboot" checked in the Odin options, your device will reboot immediately upon completion, and there are actions that you need to take while the device is in its "off" state before it re-launches itself.
16.) Once the Odin flash operation has completed, boot to recovery mode. If you left "Auto reboot" checked in Odin, immediately as the flash operation completes, press and hold the power key and the volume up key and remove the USB cable from the device. Otherwise press and hold the power button and the volume down button until the device restarts, and while the device is in its "off" state remove the USB cable and press and hold the power button and the volume up button during device restart to enter recovery mode.
17.) Immediately upon entering recovery mode you should see TWRP do a couple of things that ensure that Samsung's device protection solutions don't remove it. Once those operations have completed, reboot into the system partition.
18.) Your device should be BASICALLY ready to go. Go through the steps to "complete" setup as you see fit. If you have not already done so, connect your device to a WiFi or to an LTE network and then launch the Magisk application.
19.) Magisk may want to download updates, if it does, let it do so.
20.) Once any necessary updates / downloads have completed, re-launch Magisk and it should present you with a prompt to the effect of "Magisk is installed, but additional configuration needs to be done on your device for it to work the right way. Do you want to reboot now?" If you've made it this far, the answer is "Yes, please do."
21.) After rebooting, your device will now be configured, and be running TWRP in its recovery partition, along with a properly Magisk rooted system partition.
22.) ????
23.) PROFIT!
I hope this helps some people out!
- The Scarecrow - 2021/09/22

Has anyone besides been successful?

mydjtl said:
Has anyone besides been successful?
Click to expand...
Click to collapse
I can provide screenshots from the device that I did this to if you would like.
It's pretty cool to see the TWRP logo on a Samsung Tab series device that's running Android 11.
I don't even get the little Samsung warning prompt during device bootup that says "This device's software can't be verified" or whatever Samsung's custom ROM message is. All I get is the "This device's bootloader is unlocked" message, no warning about the integrity of the software.

mydjtl said:
Has anyone besides been successful?
Click to expand...
Click to collapse
Follow this simple as he'll no need to read all these things

pankspoo said:
Follow this simple as he'll no need to read all these things
Click to expand...
Click to collapse
Yeah - pretty much exactly that, except I Magisk patched the system image, and then copied the TWRP package's vbmeta and recovery image into the AP file for the Odin flash, and then flashed every slot rather than just the AP.

is it systemless root?

Will this work on Galaxy Tab A sm-t595? on android 10?
or know of a root guide that will work with said device?

If you dont untick auto reboot, how do you fix any issues that happen because of it?
I rooted my t500 but I think it auto rebooted, which then caused a vbmeta error that stopped it booting. It worked again after flashing the stock rom, but now it gives a vbmeta error if I try to flash a modded rom to root it and I cant get oem unlock to appear in the stock os (download mode says its already unlocked tho)

Hello,
Code:
9.) In Magisk on your device, choose "Select and patch a file" and then choose the AP file that you created and copied to the device which now contains TWRP as its recovery partition
Step 9 yields an error on T515 : Unsupported/Unknown image format
I also tried to install AP patched file with Odin, same result.
Any idea ?

Damn this works so nicely, thanks mate! Cheers!

How To Guide [GUIDE] Beginner's guide on how to root Redmi Note 10 Pro (sweet) without TWRP

I decided to make this guide since I didn't see a guide thread which explains how to root the phone.
DISCLAIMER: I am not responsible for ANY damage that occurs to the phone, you getting fired because the alarm app failed or the world getting nuked, etc...
Requirements:
-A unlocked bootloader (if you don't know how to unlock it, search "How to unlock bootloader Xiaomi"
-boot.img extracted from your phone's fastboot rom (MAKE SURE YOU DOWNLOADED THE EXACT SAME ROM THAT YOUR PHONE HAS (Check "About phone" in settings. Make sure that the version AND the code (RK(something)XM) match, if you have MIUI).
xiaomifirmwareupdater site contains unmodified MIUI roms for your device.
-If you have a custom rom, extract the rom's zip and get the boot.img from there.
-ADB and Fastboot drivers installed on phone and PC
-SDK Platform tools downloaded from official android website. Extract the downloaded zip to desktop and rename it to platform_tools
-A Computer
-Basic understanding of CMD, ADB and Fastboot commands.
-The phone
If you see an error, scroll down to the troubleshooting section.
Steps:
(on the pc)
-Copy the boot.img file to the phone's downloads folder
(in the phone)
-Download the magisk app from the official github site
-Install the app, then open it.
-In the app, select install on the magisk card
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Select patch a file, then find and select boot.img.
-Tap "let's go".
(on the pc)
-Connect your phone to your PC and copy magisk_patched.img from the phone (should be in downloads folder) back to the pc.
-Rename the file to magisk.img, then move it to the platform_tools folder which contains fastboot.exe.
-Now reboot the phone and when the screen goes fully black, hold volume down button until you see "fastboot".
-Your phone should now be in fastboot mode. Connect the phone to the pc.
-Press win+r, then type cmd
-Type cd desktop
-Type cd platform_tools
-Type fastboot devices (if you see nothing, make sure you have adb and fastboot drivers, that the phone is connected and is in fastboot mode.)
-Type this carefully: fastboot flash boot magisk.img
-Done! Now reboot the phone by typing: fastboot reboot
-If you did everything correctly, the magisk app should say that it is installed.
TROUBLESHOOTING:
Q:Fastboot says it couldn't find "magisk.img" or CMD says fastboot doesn't exist
A: Make sure that cmd says that its in C:\Users\(name)\Desktop\platform_tools and that magisk.img is also in there.
Q: Phone is in bootloop
A: Hold volume down button until phone is in fastboot and flash stock boot.img with fastboot flash boot.img. (You will not have root access) If the phone is still somehow in a bootloop, execute the flash_all_except_storage.bat script by double clicking it (found in the sweet_(region)_images folder you extracted from the full fastboot rom .tgz file).

usernamenotrequired said:
I decided to make this guide since I didn't see a guide thread which explains how to root the phone.
DISCLAIMER: I am not responsible for ANY damage that occurs to the phone, you getting fired because the alarm app failed or the world getting nuked, etc...
Requirements:
-A unlocked bootloader
-boot.img extracted from your phone's fastboot rom (MAKE SURE YOU DOWNLOADED THE EXACT SAME ROM THAT YOUR PHONE HAS (Check "About phone" in settings. Make sure that the version AND the code (RK(something)XM) match, if you have MIUI).
xiaomifirmwareupdater site contains unmodified MIUI roms for your device.
-If you have a custom rom, extract the rom's zip and get the boot.img from there.
-ADB and Fastboot drivers installed on phone and PC
-SDK Platform tools downloaded from official android website. Extract the downloaded zip to desktop and rename it to platform_tools
-A Computer
-Basic understanding of CMD, ADB and Fastboot commands.
-The phone
If you see an error, scroll down to the troubleshooting section.
Steps:
(on the pc)
-Copy the boot.img file to the phone's downloads folder
(in the phone)
-Download the magisk app from the official github site
-Install the app, then open it.
-In the app, select install on the magisk card
View attachment 5474787
-Select patch a file, then find and select boot.img.
-Tap "let's go".
View attachment 5474793
(on the pc)
-Connect your phone to your PC and copy magisk_patched.img from the phone (should be in downloads folder) back to the pc.
-Rename the file to magisk.img, then move it to the platform_tools folder which contains fastboot.exe.
-Now reboot the phone and when the screen goes fully black, hold volume down button until you see "fastboot".
View attachment 5474801
-Your phone should now be in fastboot mode. Connect the phone to the pc.
-Press win+r, then type cmd
-Type cd desktop
-Type cd platform_tools
-Type fastboot devices (if you see nothing, make sure you have adb and fastboot drivers, that the phone is connected and is in fastboot mode.)
-Type this carefully: fastboot flash boot magisk.img
-Done! Now reboot the phone by typing: fastboot reboot
-If you did everything correctly, the magisk app should say that it is installed.
TROUBLESHOOTING:
Q:Fastboot says it couldn't find "magisk.img" or CMD says fastboot doesn't exist
A: Make sure that cmd says that its in C:\Users\(name)\Desktop\platform_tools and that magisk.img is also in there.
Qhone is in bootloop
A: Hold volume down button until phone is in fastboot and flash stock boot.img with fastboot flash boot.img. (You will not have root access) If the phone is still somehow in a bootloop, execute the flash_all_except_storage.bat script by double clicking it (found in the sweet_(region)_images folder you extracted from the full fastboot rom .tgz file).
Click to expand...
Click to collapse
Very good but easier with unlocked bootloader and flashing twrp via adb flash recovery "name of twrp file". Afterwards you can flash directly magisk (I prefer 23 canary debug apk) to root.

if i may add to the troubleshooting: if it says magisk.img isn't found, just type this (after confirming connection with fastboot devices command:
fastboot flash boot
then drag and drop the patched magisk file onto the cmd window/line where you typed the command above. worked for me.

Tanks you

For beginners, "assuming bootloader is unlocked if not click here" should be mentioned.

hello, I've been trying to login to my account since this morning. after half a day I was able to get in via facebook. problem is when i want to root my phone it shows error 1004. what did I do wrong?

Bastio001 said:
hello, I've been trying to login to my account since this morning. after half a day I was able to get in via facebook. problem is when i want to root my phone it shows error 1004. what did I do wrong?
Click to expand...
Click to collapse
I've searched around, and it seems to be caused by a VPN. If you use a VPN, turn it off and try again. If not, it could be that the Xiaomi unlocking API is down temporarily.

When I root my Redmi Note 10 Pro (sweet) by using twrp to flash magisk 25.2 and lazyflasher-no-verify-opt-encrypt.zip, I receive following message
.
Nevertheless, I reboot my phone which is effectively rooted.
I can then install Magisk manager.
Has someone an idea about the meaning of this error message ?
Thanks in advance.

cocopipou said:
When I root my Redmi Note 10 Pro (sweet) by using twrp to flash magisk 25.2 and lazyflasher-no-verify-opt-encrypt.zip, I receive following message
View attachment 5704507.
Nevertheless, I reboot my phone which is effectively rooted.
I can then install Magisk manager.
Has someone an idea about the meaning of this error message ?
Thanks in advance.
Click to expand...
Click to collapse
No need to flash lazy flasher since you already flashed Magisk. They both do the same which is to disable dm verity. Also, lazy flasher is an old zip intended for old devices so maybe that's why it failed.

BigChungus321 said:
No need to flash lazy flasher since you already flashed Magisk. They both do the same which is to disable dm verity. Also, lazy flasher is an old zip intended for old devices so maybe that's why it failed.
Click to expand...
Click to collapse
I thank You very much.

BigChungus321 said:
No need to flash lazy flasher since you already flashed Magisk. They both do the same which is to disable dm verity. Also, lazy flasher is an old zip intended for old devices so maybe that's why it failed.
Click to expand...
Click to collapse
then what is the solution bro...still i cant install some custom roms showing error 1...please help me.

cocopipou said:
When I root my Redmi Note 10 Pro (sweet) by using twrp to flash magisk 25.2 and lazyflasher-no-verify-opt-encrypt.zip, I receive following message
View attachment 5704507.
Nevertheless, I reboot my phone which is effectively rooted.
I can then install Magisk manager.
Has someone an idea about the meaning of this error message ?
Thanks in advance.
Click to expand...
Click to collapse
bro am facing this erros 1. will u pls help me.

THis is the stupidest guide for beginners, this article assumes you have unlocked your phone in the first place. All the important steps are just skipped and is stuffed in the requirements. And just shows simple screenshots that even a child would know where to click.
No external links to find the sources.

While unlocking the bootloader I'm having the issue linked below, thanks in advance for all and any responses. https://forum.xda-developers.com/t/mi-unlock-country-code-broken.4572339/

r4nchy said:
THis is the stupidest guide for beginners, this article assumes you have unlocked your phone in the first place. All the important steps are just skipped and is stuffed in the requirements. And just shows simple screenshots that even a child would know where to click.
No external links to find the sources.
Click to expand...
Click to collapse
AGREE 100%!!!

How To Guide (Guide) Install TWRP + Root + Install Magisk + Bypass Safetynet

Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Warning
As stated by @beatbreakee , do not flash anything on a T-Mobile related device.
Please read beatbreakee's comment regarding this.
Warning
This has only been tested on Android 13. This guide may not work for other Android versions.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Android 13
Spoiler: Step 1 - Unlocking Bootloader
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings Application -> About device -> Version -> Tap on Build Number 7 times
2. Open Settings Application -> Additional Settings -> Developer Options
3. Enable OEM Unlocking
4. Enable USB Debugging
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot flashing unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Use the volume keys to select unlocking, and then use the power button to confirm.
Once complete, enter the following command:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Spoiler: Step 2 - Flashing TWRP
Step 2 - Flashing TWRP:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
This is not a bootable image. You must flash. fastboot boot img will not work
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.img
Code:
fastboot flash recovery_b twrp.img
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Spoiler: Step 3 - Flashing Magisk
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
5. Tap System
You should now enter the device
3.C - Installing Magisk APK
Install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Spoiler: Fixing Data Backup [Optional]
If you encounter a createTarFork() exited with error 255, do the following:
1. Reboot into TWRP
2. Select File Manager
3. Navigate to /data
4. Copy /data/fonts into /sdcard/
5. Copy /data/nandswap into /sdcard/
6. Delete /data/fonts
7. Delete /data/nandswap
The error should now be resolved
The deleted files should not cause any issues. If any issues do occur, then promptly restore them using the backups made to /sdcard/.
Spoiler: Bypassing Safetynet [Optional]
Step - Bypassing Safetynet:
This is optional; however, highly recommend
Note, due to the nature of Safetynet, this can change at anytime and may begin failing in the future.
A - Repackaging Magisk
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Hide The Magisk App"
4. Enter New Application Name
5. Click OK and wait
6. Uninstall original Magisk APK if it has persisted
B - Enable Zygisk & Deny List
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Enable "Zygisk"
4. Enable "Enforce Deny List"
C - Configure Deny List
it is recommended to add any application you would like to hide from Magisk here
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Configure DenyList"
4. Tap the 3 dots in the top right and select "Show System Apps"
5. Select the following applications:
~ Android System
~ Google Play Store
~ Google Play Services
~ Google Services Framework
D - Delete App Data
1. Launch Settings Application
2. Select Apps
3. Select App Management
4. Clear data for the following apps:
~ Google Play Store
~ Google Play Services
~ Google Services Framework
5. Reboot the device
E - Flash Universal Safetynet Fix
1. Download the Universal Safetynet Fix
2. Launch Magisk
3. Select Modules
4. Select "Install From Storage"
5. Select Universal Safetynet Fix
6. Wait for Flashing to complete
7. Reboot
F - Test Safetynet
1. Install YASNAC
2. Grant Super User rights
3. Select "Run Safetynet Attestation"
If both checks pass, you successfully have passed Safetynet!

PlasmaTornado said:
Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings -> About -> Tap on Build Number 7 times
2. Open Developer Settings
3. Enable OEM Unlocking
4. Enable Android Debugging Bridge (ADB)
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
View attachment 5792895
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot oem unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Then finally:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Step 2 - Flashing TWRP Image:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
! It is HIGHLY recommended that you boot into the twrp.img before flashing to ensure that TWRPworks . I did not, but I recommend you do. !
To test this, enter the following command:
Code:
fastboot boot twrp.img
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.image
Code:
fastboot flash recovery_b twrp.image
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
You should now enter the device
3.C - Installing Magisk APK
If for some reason the Magisk Installer did not install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Click to expand...
Click to collapse
Good post but one problem...to unlock is " fastboot flashing unlock"

Canuck Knarf said:
Good post but one problem...to unlock is " fastboot flashing unlock"
Click to expand...
Click to collapse
Of course! Thank you, used to the old way of unlocking

I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?

kouzelnik3 said:
I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?
Click to expand...
Click to collapse
Following the method created by @dladz should still work perfectly fine!
There could still be issues with this TWRP as this is not an official image.
AFAIK Switching ROM is still untested, but decryption, backups and flashing are all confirmed working, which for me makes me feel significantly more comfortable

I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!

kouzelnik3 said:
I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!
Click to expand...
Click to collapse
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!

PlasmaTornado said:
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!
Click to expand...
Click to collapse
I will try factory wipe...flash flash from 2213...to 2215...might work

Canuck Knarf said:
I will try factory wipe...flash flash from 2213...to 2215...might work
Click to expand...
Click to collapse
Fantastic news. Let us know the results!

i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. AND my 10T and 10 Pro BOTH have been fully bricked, then formatted and flashed thru an authorized MSM Account.... Doing an ERASE ENTIRE FILE SYSTEM, thru msm, did not get rid of this file, so i doubt a twrp level wipe will do it either... MAYBE an "unlock Critical" in Fastboot, followed by a "Fastboot wipe", "DM-verity disable", and "VB-Meta erasure" MIGHT take out this crazy security system, but i know this .... if you flash an original FW using TWRP, it has protections in it to keep IT (twrp) from being overwritten, so you might find yourself in bootloop territory if you region hop.... cuz the fw might notice the changes to the partitions... For now, until someone is brave enough to challenge the Android 12 kernel and remove these trapdoors, I would just be happy you have TWRP, and wait for the person who finds and slays the Tmobile Dragon hidden in our phones! But this is truly an android 12 function that was put in place for Carrier and Manufacturer benefit ONLY. Another strike against 1+

beatbreakee said:
i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. So this is truly an android 12 function that was put in place for Carrier benefit ONLY. Another strike against 1+
Click to expand...
Click to collapse
Absolutely despicable and such an anti-consumer technique.
This stands against everything OnePlus was. It's sad to see OnePlus turn into such an anti-developer phone
A Carrier should never have this much power over a device. It is absurd

heres a google drive link to my account if anyone wants to see a video of what you will go thru if triggered!
feel free to share or re-upload the link/video to anywhere... ppl need to know this is happening thanks to Tmobile and Oneplus collaboration. I have not seen any reference to another carrier inside any of the device policy files, and my phone was restored to a NON TMO branded build of android 12 for the 2217 NA model, so it should NOT have even recognized the TMO policies cuz i even used a new sim card after the MSM Unbrick, and it still instantly locked in less than a second of plugging it in... heres the vid
https://drive.google.com/file/d/17H6YpGrUCe1Y7PoFji4gperdpTHNX5AI/view?usp=sharing

also everyone should know, that EVERY fw on the internet no matter whether it is labeled, 2213, or 2215... 2217, as well as 2413-2419 ALL have EVERY other model's manifest built in and all of the restrictions / bloatware that each region comes with, saved into the OFP extracted files.... so there really is nothing that expressly was bricking your phones by simply flashing a different labeled FW..... the brick came from the manifest reading the region identifiers that the manifests are labeled under.... it is a file that is again picked by some random hidden check inside the TMO EFS, and as soon as your phone tries to boot the newly flashed FW, the TMO Lock is what bricks your phone, to either a bootloop state, or if you continue to force a flash by using Fastboot , you will have a non responsive phone, thanks to this stupid security issue. If unresponsive, the only way out is MSM Tool... and i can help you locate your test points if your buttons dont work.
I cannot publicly post a picture nor a description of where the test points lie inside the 10T , because i already got a cease and desist letter from BBK and i dont know if they have said anything to the mods here about posting Undisclosed hardware access points.... but ive been a member here almost 10 years, and i aint risking a ban from a tattle tale company! There are test points on the 10 t though,.. just well hidden!
The 2nd pic is of the 2217 Unpacked OFP , yet the build prop shows a 2210-2211 base in one and a 2413-2415 base in the.... with NO 2217 in either prop,or manifest file, yet when my phone was flashed back from Brick status, THIS is the FW that was used, and my phone identifies as a 2217 NA now..... can oneplus be any more clear that they have completely turned against us, by straight SHOWING US that they are being super cryptic and sneaky in something as common as the BUILD.PROP files?!?

The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?

kouzelnik3 said:
The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?
Click to expand...
Click to collapse
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )

Canuck Knarf said:
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )
Click to expand...
Click to collapse
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.

kouzelnik3 said:
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.
Click to expand...
Click to collapse
Yeah i hear you but I'm not sure if this a bootable version or a just install version....I will try it on mine to see if i get the same as you

Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works

Canuck Knarf said:
Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works
Click to expand...
Click to collapse
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?

kouzelnik3 said:
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?
Click to expand...
Click to collapse
It appears the image is not bootable. As stated, this is the one thing I didn't try.
I have amended the guide. Thank you

Magisk 25.2 Installation Failed on Samsung A750GN

First for all before I start I would like to say that Im not good at tech or any stuff like this. I hope you guys can guide me.
This is my 3rd times re-rooted my Samsung A750GN but I don't know what the cause is. Yes I do read the magisk installation docs, what I missing here? In the log file show that failed because of "Permission Denied" but I don't know what should I do.
ISSUES
- Button Superuser and Modules are unable to click.
- Magisk Installed shown N/A.
IMAGES
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You said third time, does that worked before?
also what is the process you are using to root your phone?

Hello zayne77, you are trying to install magisk by magisk no good must patched with magisk the official firmware AP.
As explained in instalation by John Wu there is a tutorial on this forum how to proceed with a search you find.
Type magisk in the forum search of the aura for the coversation thread dedicated to magisk.
https://topjohnwu.github.io/Magisk/install.html
[Updated September 2022] How to root A7 2018
Disclaimer Do this at your own risk as I will not be responsible for your bricking the phone or rendering it unusable. Proceed with caution! If you want to root stock and for some reason want to have the latest security update, you have a...
forum.xda-developers.com

aiSanaul said:
You said third time, does that worked before?
also what is the process you are using to root your phone?
Click to expand...
Click to collapse
No

meric57 said:
Hello zayne77, you are trying to install magisk by magisk no good must patched with magisk the official firmware AP.
As explained in instalation by John Wu there is a tutorial on this forum how to proceed with a search you find.
Type magisk in the forum search of the aura for the coversation thread dedicated to magisk.
https://topjohnwu.github.io/Magisk/install.html
[Updated September 2022] How to root A7 2018
Disclaimer Do this at your own risk as I will not be responsible for your bricking the phone or rendering it unusable. Proceed with caution! If you want to root stock and for some reason want to have the latest security update, you have a...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you brother, may I ask, in the instructions he giving at Rooting Phones -> steps -> 9. Add the recovery.tar file to the AP slot and press start
where the recovery.tar is coming from? I'm sorry, I know I just look like a idiot

zayne77 said:
No
Click to expand...
Click to collapse
EASIEST METHOD:
Download Magisk Canary Build from here: https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Install and Open that app.
Go to magisk settings and enable canary.
Transfer AP file from stock firmware to phone.
Then patch the AP fine using Magisk Canary app.
Then flash it to your phone using Magisk.
Enjoy Magisk Root!
NOTE: using canary build because normal build will give patching errors, like one you got.

@aiSanaul right know my phone are already rooted but the issues is like I mentioned above. Do I need to unroot my device first?
EDIT: or I just need to repatch the AP file and flash it using Magisk again?

zayne77 said:
@aiSanaul right know my phone are already rooted but the issues is like I mentioned above. Do I need to unroot my device first?
EDIT: or I just need to repatch the AP file and flash it using Magisk again?
Click to expand...
Click to collapse
yea first flash stock AP file and then the patched one

zayne77 said:
@aiSanaul right know my phone are already rooted but the issues is like I mentioned above. Do I need to unroot my device first?
EDIT: or I just need to repatch the AP file and flash it using Magisk again?
Click to expand...
Click to collapse
I would say, Try both methods.
- Just flash the patched AP file without unrooting.
- First flash Stock AP file then boot into system, reboot to download mode and then flash patched AP file.
and See which one works for you.

Hello zayne77, once the AP patched with magisk must be transferred with adb pull as explained in John wu's installation. Then open odin put the 4 BL-AP files patched_magisk -CP and home CSC as you say it is already rooted so home CSC to not lose data.
ADB pull for the transfer of the patched app open command prompt path on your pc to transfer the patched file, then type this in command prompt
adb pull /sdcard/Download/name of patched .tar file

meric57 said:
Hello zayne77, once the AP patched with magisk must be transferred with adb pull as explained in John wu's installation. Then open odin put the 4 BL-AP files patched_magisk -CP and home CSC as you say it is already rooted so home CSC to not lose data.
ADB pull for the transfer of the patched app open command prompt path on your pc to transfer the patched file, then type this in command prompt
adb pull /sdcard/Download/name of patched .tar file
Click to expand...
Click to collapse
I believe this is mentioned in Magisk installation docs and I think that is how I root my Samsung A750 phone.
INFO: back in the day, I have no issues regarding of this (with older version of magisk) but when upgrade the latest version of magisk I'm not able to hide root from any apps (the button of Superuser is disable) but I just ignore that. Until this weeks I decide to re-root my A7 phone but facing this issues.
How I Root My Samsung A750GN​
This basically install a new firmware (Without Root):
I download new firmware from https://samfw.com/
Long press volume up to unlock the bootloader. For wipe data and automatically reboot.
Open Oden and add BL_A750XXX to BL slot; AP_A750XXX to AP slot and so on (including HOME_CSC to USERDATA slot)
Click Start and done.
Here are actually how I root:
Download the latest version of Magisk apk (version 25.2) and install.
Transfer the AP_A750XXX file from PC to phone by using adb push /file_path/AP_A750XXXX.tar.md5 /sdcard/Download/ (I also tried just using normal transfer).
Press the Install button in the Magisk card.
Choose “Select and Patch a File” in method, and select the AP tar file.
Start the installation and done.
Transfer the magisk_patched_[random_strings].tar to PC by using adb pull /sdcard/Download/magisk_patched_[random_strings].tar.
Open Oden and add BL_A750XXX to BL slot; magisk_pathched_[random_strings].tar file to AP slot; CP_XXX file to CP slot and so on (except I didn't add anything in USERDATA slot).
Click Start and done.
Install the latest version of Magisk app.
Wala, that's it ! I also transfer the magisk_patched_[random_strings].tar back to phone by using adb push /my_pc_path/magisk_patched.tar /sdcard/Download/[/CODE]

Hello zayne77, I put you my tutorial that I converted it into English.
I did like explaining just magisk 25.2 not installing TRWP .
1- The bootloader follow explanation Use vol down + vol up + USB cable plugged into a PC to boot the phone into download mode;
Long press vol up then confirm that you want to unlock the bootloader (this is only needed once);
* Please note that all your data will be erased, including internal memory, and the phone will restart!!
5- Let the phone start normally, go through the configuration and connect to the Internet (wireless or mobile data) in order to unlock
6- Make sure OEM Unlock is enabled in Developer Settings.
2- Once reboot install magisk 25.2 APK.
3- Download the official firmware on Samobile.com or frija you will find this on the forum.
4- Transfer the official firmware AP to the smartphone.
5- Open magisk recovery mode choose corrective mode choose the AP download press "let's go."
6- Once the modification is finished in the root directory, download a patched_magiskxxxx.img.tar file if found.
7- Transfer it with adb pull like this adb pull /sdcard/Download/patched_patched.magiskxxxx.img[.tar] you can rename it "patched_magisk.img.tar"
8- Put your smartphone in download mode Use vol down + vol up + usb cable connected to a PC to start the phone in download mode, briefly press vol up to
confirm that you want to enter download mode;
9- Open Odin latest version placed 4 files following BL-AP magisk patched.img.tar-CP-home CSC leaves auto start checked in odin option.
10- It will restart open magisk activated Zygisk restart install safetynet modules - shamiko-hidemagisk prop config-busybox nk-lposed see on this page https://forum.xda-developers.com/t/discussion-magisk-the-age -of-zygisk.4393877/
message #3-#6 to #9.
11- Install foxmagiskmodulemanager the catalog of modules for magisk here https://github.com/Fox2Code/FoxMagiskModuleManager/releases
12- Once rooted the security message for the removed open Odin place UP-param.tar in AP and flashed. See attached file
Up_param.tar download link on my mega here to know for S10 exynos for S10e- S10+ versions see 5G I don't know if it works.