title says it all
You should use Power Key + Vol Up. Also you can use adb and type following command "adb reboot recovery" without quotes
kebson4021 said:
title says it all
Click to expand...
Click to collapse
From oneui 3 you need a usb plugged into a pc or a tv or another phone.
Keep the usb connected and use the volume up + power button combo
Fredin_ said:
From oneui 3 you need a usb plugged into a pc or a tv or another phone.
Keep the usb connected and use the volume up + power button combo
Click to expand...
Click to collapse
Yes. They messed up with this too!
Fredin_ said:
From oneui 3 you need a usb plugged into a pc or a tv or another phone.
Keep the usb connected and use the volume up + power button combo
Click to expand...
Click to collapse
thank you. i was confused why it wasn't working. But Thanks Again
Related
So I just downgraded from Emui 3 to 133 and I want to know if the bootloader is unlocked. If not, does anyone know How to unlock it? Thanks in advance
Enviado desde mi SM-T320 usando XDA Premium HD app
To checking it just boot into bootloader mode. Turn off device. Connect to PC by USB cable and press and hold Power + Vol(-).
Sent from my HUAWEI P7-L10
Ziolek67 said:
To checking it just boot into bootloader mode. Turn off device. Connect to PC by USB cable and press and hold Power + Vol(-).
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
i think that wrong .. you need to just hold vol. down and connect usb to go to bootloader.. and to recovery hold vol. up and connect usb
mrcs64 said:
you are right. but it works on powered off device?
Click to expand...
Click to collapse
only powered off ...
when i wanna flash something I always power phone off then i have ready cable in laptop then am holding desired vol + or - btn and just plug usb to the phone ...
vol +and vol - plus usb cable will do the same as 3Button method... auto update from stock recovery... vol- plus usb cable goes to fastboot and vol+ and usb cable goes to stock recovery...
How to check if your bootloader is unlocked:
-Open a cmd console
-Type: adb reboot-bootloader
-Type: fastboot oem get-bootinfo
-Done
There is usually more than one way to do something, just because some one does it slightly differently from you doesn't make them wrong or make you right...you are both wrong and both right...
Seriously guys...please stop the arguing and name calling!
My 1020 got bricked while flashing through WPInternals.
In the middle of the flashing the USB got disconnected and after that I have blank screen. The power button pressing does make phone vibrate. Also soft reset combination makes vibration. However I am not getting anything on my laptop on USB connection. No connection notification. Nothing on device manager. I tried combinations to get it detected but nothing works.
So the question is, Is there any way I can blindly send force flashing to one of the USB port and make it happen ?
JTAG is the only option ?
same me hichic
Flash Mode
Hello,
try this: power off/reset and power on holding vol-up key. You should get a flash-and-cogwheel sign on your display. If so, you cna reflash your (valid) .ffu file using PhoneImageDesigner/Lumia Flash Tools (->google!).
Are you sure your USB cable or port is not broken?
Best whishes,
Joachim
JoachimP said:
Hello,
try this: power off/reset and power on holding vol-up key. You should get a flash-and-cogwheel sign on your display. If so, you cna reflash your (valid) .ffu file using PhoneImageDesigner/Lumia Flash Tools (->google!).
Click to expand...
Click to collapse
Okay, I have already tried that, since the USB got disconnected during boot loader flash, it does not display anything on the screen when I start with power button or reset combo. It only vibrates.
JoachimP said:
Are you sure your USB cable or port is not broken?
Click to expand...
Click to collapse
I have changed the cable too(USB flex cable of my lumia and USB cable too), It does charge battery, does keep flashing the start button once in a while when the cable is connected. I am sure USB is working fine. But not getting detected in PC.
http://forum.xda-developers.com/showpost.php?p=69395504&postcount=4
booker50rus said:
http://forum.xda-developers.com/showpost.php?p=69395504&postcount=4
Click to expand...
Click to collapse
Yup, its same. I had to open another thread in Windows 10 as nobody responded in windows 8. Thanks.
Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?
Hold volume down + power for 15 seconds, hold it even longer to try to get into fastboot mode. Was the battery low? Maybe you need to charge the phone up.
My phone is charged.
I tried your solution, but didn't work..
theoh88 said:
My phone is charged.
I tried your solution, but didn't work..
Click to expand...
Click to collapse
Put rescue firmware in dload folder in sd card and boot and hold power + and -...
rayman95 said:
Put rescue firmware in dload folder in sd card and boot and hold power + and -...
Click to expand...
Click to collapse
It only boots to fastboot from adb shell or if i plug it in my computer and hold vol down + power if i dont plug it in it will not boot into fastboot.
I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "
theoh88 said:
I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "
Click to expand...
Click to collapse
Even with Pwr + - buttons hold for 5 or 10 secs????
rayman95 said:
Even with Pwr + - buttons hold for 5 or 10 secs????
Click to expand...
Click to collapse
Yes, nothing happens
Hold Vol Down while inserting a USB cable connected to your computer, assuming you have one.
Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER
theoh88 said:
Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER
Click to expand...
Click to collapse
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?
AneirinIV said:
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?
Click to expand...
Click to collapse
No, i found nothing...
How did you try to update to nougat? Can you boot into erecovery?
theoh88 said:
Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?
Click to expand...
Click to collapse
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
zgfg said:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
I already tried DC phoenix, but my phone isn't recognized so i can't use it
Hi,
After hours of search, i found a python program for honor 4C. This program can communicate with p9 with usb serial port. So, i got Linux on my pc, tried to be familiar with python.
Now, i need some information:
startframe
headframe
bootheadaddress
bootdownloadaddress
If guys can give me this information or tell me where to find them, please leave reply !
My phone is the same with yours. Waiting for good news from you. Try this solution, i dont have this tool.
Could somebody find firmware with testpoint for eva-l09 ?
Hey mate I managed to revive my phone ... it had to be something hardware related. I opened it up, disconnected the battery cable for a couple of minutes, reconnected and re-screwed everything and it turned on. I didn't even lose any data.
Same trouble
Hi every body 'im so sorry for my english, i'm french...
Could some one please help me, i've tryed to restore a mate 10 pro who as in demo mode but i made a mistake with a "update.zip" file and now the phone is always off, no fastboot or recovry mode, the phone stay off when i press the power bouton. when i plug the USB cable, it appear "USB SER" only.
Thanks for your attention
strange thing!!!
i try to turn off my note 9 exynos then press power+bixby+volume down together but it dont get to download mode but only bootloop till i release the buttons why?
i didn able to get to download mode with the usb hold the bixby and volume down then plug the usb and it did go to download mode
is my phone not good ?
bubu23 said:
strange thing!!!
i try to turn off my note 9 exynos then press power+bixby+volume down together but it dont get to download mode but only bootloop till i release the buttons why?
i didn able to get to download mode with the usb hold the bixby and volume down then plug the usb and it did go to download mode
is my phone not good ?
Click to expand...
Click to collapse
Why would you wanna go into download-mode?
No: your phone is NOT defective, only there's a new procedure to get your phone in download-mode:
https://forum.xda-developers.com/showpost.php?p=77250579&postcount=1
henklbr said:
Why would you wanna go into download-mode?
No: your phone is NOT defective, only there's a new procedure to get your phone in download-mode:
https://forum.xda-developers.com/showpost.php?p=77250579&postcount=1
Click to expand...
Click to collapse
just wanted to check my bootloader so wanted to go to download mode and in youtube people show just to hold the three combine keys but not working for me
bubu23 said:
just wanted to check my bootloader so wanted to go to download mode and in youtube people show just to hold the three combine keys but not working for me
Click to expand...
Click to collapse
If that's not working,can't you use the ADB command adb reboot bootloader ?
KOLIOSIS said:
If that's not working,can't you use the ADB command adb reboot bootloader ?
Click to expand...
Click to collapse
no my friend it works via usb i say that befor and as i see every body say to get to download mode with usb they call it the new methud dont know why lolll
bubu23 said:
no my friend it works via usb i say that befor and as i see every body say to get to download mode with usb they call it the new methud dont know why lolll
Click to expand...
Click to collapse
OK,how about booting to recovery using this (then use the recovery menu to go to bootloader mode):
https://www.hardreset.info/devices/samsung/samsung-galaxy-note-9/recovery-mode/
KOLIOSIS said:
OK,how about booting to recovery using this (then use the recovery menu to go to bootloader mode):
https://www.hardreset.info/devices/samsung/samsung-galaxy-note-9/recovery-mode/
Click to expand...
Click to collapse
nope i try this before and try to get to bootloader like this but it just start my phone regular lollll i can get to bootloader only with usb why??
bubu23 said:
nope i try this before and try to get to bootloader like this but it just start my phone regular lollll i can get to bootloader only with usb why??
Click to expand...
Click to collapse
I can get to it via recovery on my Note 9,I have no explanation as to why you're having issues.
Perhaps try the method given in post #2 of this thread.
New method now for Note 9 download mode. Power off, hold Bixby+Vol Down and connect USB cable to PC to trigger it.
Can't boot into download mode too....
Australia ver....
shirakani said:
New method now for Note 9 download mode. Power off, hold Bixby+Vol Down and connect USB cable to PC to trigger it.
Click to expand...
Click to collapse
Yip, this works...but tricky combo to hold down Bixby and Vol Down while plugging into USB power...I almost took my device in for fixing because I just could't for the life of me boot into Download mode after encountering the dreaded custom binary error on trying to boot up...
Hi all,
I've updated my Galaxy A71 to the latest update included with AP patched by Magisk Manager..
and then i found that the download mode is gone.
All i see is exactly like this:
https://cutt.us/wuxzj
Except for the device status in the bottom "unlocked" for me.
was this caused by the update or I've screwed something ?!!
any help would be appreciated , thank yall.
could you please try fastboot command? with fastboot binary?
the same thing happens to me and whatever i choose in the bootloader screen doesnt make a difference
Mr.3bood said:
Hi all,
I've updated my Galaxy A71 to the latest update included with AP patched by Magisk Manager..
and then i found that the download mode is gone.
All i see is exactly like this:
https://cutt.us/wuxzj
Except for the device status in the bottom "unlocked" for me.
was this caused by the update or I've screwed something ?!!
any help would be appreciated , thank yall.
Click to expand...
Click to collapse
Samsung introduced a New process to enter download mode on their recent firmwares
1 power off phone (do not connect usb cable)
2.connect usb cable to PC
3.press and hold volume up and down buttons
4. Connect usb cable to phone
5. Wait 5 seconds and bootloader will load (keep volume buttons pressed)
dezborders said:
Samsung introduced a New process to enter download mode on their recent firmwares
1 power off phone (do not connect usb cable)
2.connect usb cable to PC
3.press and hold volume up and down buttons
4. Connect usb cable to phone
5. Wait 5 seconds and bootloader will load (keep volume buttons pressed)
Click to expand...
Click to collapse
Hi,
it is not working for me, displays only battery charging icon and it wont boot.
Is there any other solution?
Thank you!
mculumov said:
Hi,
it is not working for me, displays only battery charging icon and it wont boot.
Is there any other solution?
Thank you!
Click to expand...
Click to collapse
Not that I'm aware of sorry ... You are connecting cable to a powered on PC or laptop? Holding down both volume up and volume down whilst connecting cable ?
dezborders said:
Not that I'm aware of sorry ... You are connecting cable to a powered on PC or laptop? Holding down both volume up and volume down whilst connecting cable ?
Click to expand...
Click to collapse
Also they need to hold the power button
On the newer samsung phones you need to power off your phone hold down volume up and volume down and insert your charging cable in your phone make sure the cable is inserted in a pc or a charger.