I have been using a (ATT) Note 3 on TMobile for the last 7-8 years that I rooted and dialed in thanks to this Forum years ago.
Because I like the 16-1 aspect ration, I just bought a Note 5 to replace my aging Note 3.
Here is what I would like to do.
1) - Download all the Data from my Note 3 to my local pc. (which program should I use?)
2) - Root & remove all the bloatware from the new att Note 5
3) - drag/drop my choice of apps, messages, contacts from my pc to the Note 5
I took a screen shot of my *about page showing all the phone info, but unlike my Note 3, when I plug in N5, it does Not connect as a device, (it charges, but I can see nothing on my pc).
SMN920A
6.0.1
N920AUCS4CPK1
Not sure which forum to start in and came here for advice.
Thank you
Jim
I have a different device, so not certain this applies... my device defaults to charge only when I connect to to my PC.
I swipe down on the notification area, select USB options, and then enable File Transfer.
Good luck!
Related
1. Am I right that there is no way to make an ethernet connection to it? Google comes up blank. My Galaxy T700 8.4" tablet can do it, using the Samsung adapter cable (2xUSB, ethernet, power) but on the S6 only the 2xUSB works.
2. After writing some files to a flash stick plugged into a USB OTG cable (e.g. the above one) how long is it before the files are finally closed? It is suggested to unmount the USB device (in the stock file manager I assume) but that is so "1990s" Even windows XP doesn't need to do that.
3. Is there any functionality to send/receive SMS when there is no apparent GSM connection, only WIFI? After discarding a few SMS apps (mainly because they had no retries on failed sends - a real issue in UK countryside where we have poor signal) I am now using Smitten SMS which does seem to do retries. But also it has managed to send SMSs when I didn't see any signal! I did a lot of googling and could not find anything apart from cryptic references to Google Voice. I am well aware of the issues in doing texts over the internet (the phone doesn't know its # so CLI cannot work unless you configure that somewhere - the Apple I-message features needs that; no way to route the reply IF it is sent to the GSM network which is why I-message works only between two Iphones and only if both have an internet connection).
THANK YOU in advance for any information.
Great phone, BTW. Here
http://peter-ftp.co.uk/808/S6-v-808/
is a comparison of the S6 with the Nokia 808, and of two S6 camera apps.
My phone is rooted, BTW.
Is there anybody in this forum?
Hi guys, i bought my N6 recently, i was just 2 DAYS with this wonderful phone, just in love with it.... So after JUST 2 DAYS of using, i had an aircraft accident, and on the accident my device "flew" to the aircraft's panel and then broke the LCD ( There are 2 crack's on the phone, one of them seems to be on touch ( i can feel it when i touch it) and the second crack seems to be exactly on LCD, i can see that it is cracked, but a i can't feel it. So my question is, how can i FORMAT my device without using the "screen" ? Do we have an option to format trough USB? I think that my device is working, because i can hear the screen sound locking! As my N6 has a password to power on, i am unable to turn it on and see if my device still can receive calls or to test if still works.... I would like that somebody could help me, just after 2 days of using... In my country, the NEXUS 6 is not available to sell, so i would have to IMPORT the LCD an then make the installation, but before that, i would like to have sure about the phone, if it IS or Not working... Hope somebody can help me, tnks a lot!
Try using Wug's Nexus Root Toolkit. I think it has an option to format your nexus 6. Take care
If you use Google chrome on your pc, enabled usb debugging and enabled "install from unknown sources", then you might be able to operate your phone without a display using a browser app called Vysor.
I have an Odyssey that currently has 57644 minutes before I can try another code combination. I would like to flash a new ROM on to it that would allow interop unlocking and let me get all the stuff I want off of it. Granted, that isn't a long time to wait to try again, but that is the tail end of a couple years of waiting. I wrote some possible codes down near to the time it got locked, but that is about all I have to go on and I'm not optimistic.
So, I connected the phone to my Windows 10 laptop and it was recognized (eventually.... had to do several soft resets of the phone). In Explorer, however, there was just an empty root directory showing up. I tried MBN_Creator but it also could not see a valid phone to flash to.
In Device Manager, I saw that only a generic (from 2006) USB/phone driver was installed. I have not been able to find a driver (Samsung or otherwise) that will install on Windows 10. I have tried a few on a WIndows 8 Pro system I have, but they also have not worked at showing any kind of file system on the phone. Is there something in the Windows Phone SDK that could be used?
I saw several references to being sure to use the original Samsung cable. I can't find that, but I tried one I did have along with borrowing a newer Samsung. The cable I have shows several folders on the borrowed Samsung (as does the cable my friend's using ... also not a Samsung cable), but neither cable works with the Odyssey.
I've tried soft resetting and power-cycling several times, but no dice.
I'm out of ideas, and would appreciate any insight you can give me.
I stumbled across a 'fix' for the huge number of minutes which was to pull the SIM and reseat it. So, I gave that a try and it came back on with 1.2 million minutes. . not the result I was hoping for.
I repeated the reseat and it was back to the 57k and change.
On the off-chance that the directories would show up, I checked and still nothing.
Once, I got the confirmation pop-up on my laptop for access to photos on the phone, but that had be finished on the phone. It seems weird that I wouldn't have been prompted for that last night, or the other times I tried this morning.
Now I'm thinking what I saw last night with my friend's phone was solely due to one being locked and the other unlocked (so, user error and ignorance). I thought I remembered seeing things when locked and connected to my old computer. I guess I must have allowed access.
From poring over the internet, it looks like what I want to do isn't possible and I'll just have to wait it out and hopefully guess right. If I'm wrong about having to wait, I'd appreciate being corrected.
I've connected my Note 9 to my PC, just as I'd done for years past with my Note 4, but nothing pops up. I'd already enabled Developer Options and selected MTP (I can't remember the name of the option). Am I missing something? Nothing pops up on my computer.
try another cable / computer?
raul6 said:
try another cable / computer?
Click to expand...
Click to collapse
OK and I've done so and I've even tried my mom's Note 9. Her Note 9 worked, but she doesn't have the same case as I have. As it turns out, my phone did work just fine, once I removed the battery case and plugged it straight into my phone.
Are all battery cases like this or just mine? That is, no matter what extended battery case I have, will I find myself removing it to connect my phone to my PC? Or could it just be the case that I am using?
Hi, I really hate to make a new thread, but I just cannot get this darn thing to connect to my PC. I had a G900A (S5) for over 4 years, rooted w/custom rom. I had/have a G935F rooted with SMan custom rom on Android 8. They both work fine (well S5 died a bit ago...LOL). I downloaded the newest Samsung USB driver, which installed fine and the G935F still works. I tried it both on my W7 Pro desktop and W10 Home laptop.
But this damn S20 will absolutely not connect (using same cables on both, except of course the S20 uses USB-C). This THING is on Android 11 (sucks to holy hell). I enabled the Developers Option and enabled USB Debugging and then changed the USB Default config from Charge Only to "Transferring files" and still NOTHING (of course I can say that it Does charge).
I have looked Everywhere. Called useless T-Mobile and they did not know. I got it on Friday and going to the store Monday. Can anyone solve this and save me a trip or do you think something is wrong with the hardware (it's brand new out of the box)?
THANKS!
does windows recognise that a phone is plugged in or not. use the original cable if you're not and swap which USB ports you try on the PC/laptop.
there is supposed to be an issue where MTP screws up large file transfers but it still recognises the phone.
samccfl99 said:
I downloaded the newest Samsung USB driver, which installed fine and the G935F still works. I tried it both on my W7 Pro desktop and W10 Home laptop.
But this damn S20 will absolutely not connect (using same cables on both, except of course the S20 uses USB-C). This THING is on Android 11 (sucks to holy hell).
Click to expand...
Click to collapse
Was it v1.7.43 and did you remove 'any' old driver versions before installing -
- https://developer.samsung.com/mobile/android-usb-driver.html
And when plugging in the phone for the first time you may have gotten a prompt to allow access, if different/more annoying under Android 11 afaik.
And on a different but Android 11 front, can I ask what bits sucked or were different to 10 for you on this device?
b1k3rdude said:
Was it v1.7.43 and did you remove 'any' old driver versions before installing -
- https://developer.samsung.com/mobile/android-usb-driver.html
And when plugging in the phone for the first time you may have gotten a prompt to allow access, if different/more annoying under Android 11 afaik.
And on a different but Android 11 front, can I ask what bits sucked or were different to 10 for you on this device?
Click to expand...
Click to collapse
Hey, did you mean to quote without replying..?
Hi, I said I installed the newest (that is the version) and did it before I even got the phone and my 935F worked fine. But no, I did not uninstall the old one. It knew it was there and it did it. I have updated the driver the same way in the past and both the 900A and 935F always worked.
Also I think I said what versions I had on both phones, which were android 4 + 5 on the 900A and 7 + 8 on the 935F.
It NEVER asked me Anything Anytime I plugged it in.
I could actually live with this phone (made so cheap, by the way), if I could just get into it and complete putting my files on it. Also THIS phone is draining battery a bit Because I can't root it to get rid of whatever bloatware crap is on it (any suggestions on that?).
Plus I don't like all the crazy crap it displays and does. ALSO, CAN THEY KEEP MAKING THE CLEAR BUTTON EVEN SMALLER???
Attached is a pic of my beloved S5 BEFORE GOOGLEY SCREWED UP ANDROID, THAT THEY CREATED TO BEGIN WITH...Grrrrrrrrrrr...THOSE WERE THE GOOD OLE DAYS OF REAL ANDROID...LOL.
Thanks anyway for the reply!
PS, sorry I been away from the forum for a while. Things are a bit different now! Sorry, b1k3rdude!
3mel said:
does windows recognise that a phone is plugged in or not. use the original cable if you're not and swap which USB ports you try on the PC/laptop.
there is supposed to be an issue where MTP screws up large file transfers but it still recognises the phone.
Click to expand...
Click to collapse
Hi, I did try the same "extension" cables and ports that I used for the 935F, but I had a USB-C laying around for my bluetooth and used that and never thought to use the original cable that came with the box (still in the box). It Never recognized the phone ever. I will try that...If it works I am going to bang my head against the wall because I spent hours trying it and researching it and even uploaded certain files to my google drive just to get them to the new phone (I Was Determined)!!!
I will try it and edit this with the results. Thanks!!!
Son of a B*tch, that worked! The cable that came with the BT did not work, but the original one did right away. I did not know that it installs separate drivers for different phones! It installed all the drivers and the phone asked for permission and Voila! Even worked with my old USB extension cable. I never would have thought of that.
THANK YOU, THANK YOU, THANK YOU! See, when I got up I went to look to see if anyone answered before I even took my pills and etc...Now back to all the disastrous news. I am a H Andrew "victim" and feel bad for the people of LA, and of course what happened in Afghanistan. So off to the News...
Also may I ask what is so special about the cable that came with the phone as opposed to the one I used from my BT??? Thanks!
So on another note, any tips on how to get around all the crap of UNROOTED Android 11?
Also, do any of these rooting threads really work on this US version of the phone? For sure this darn BL is locked. I did find a procedure to tell. A bit complicated (for me), but now that I can get into the phone, I can surely try.
Also I miss my Viper for great sound. Anyone know how to replace it with something if I can't get this rooted? AND WHERE THE HELL IS THE HEADPHONE JACK??? LOL. Plus, do you know how long it took me to figure out how to just get a screenshot on this THING??? JEEZ!
We switched to T-Mobile from ATT and this phone cost me Only $99 over 24 months + $49 tax, while the other 3 on the family plan got their usual rotten apple (I-12's) for free plus tax. I Refuse to get one, but I am an old time programmer and can't see my way to a rotten apple...yet...LOL
Thanks, Sam in FL
Also, I must say that this 5G here actually works in spots (not in my condo though). I got over 500 Down and 49 Up near me, then got depressed when it did not do that in my condo, but I got wifi anyway and who really needs that much down anyway???
Samsung's cables designed for data transfer and flashing are not the same as off the shelf data transfer cables (unless it's made by a decent manufacturer like Anker).
for getting rid of the crap apps, look up ADB debloat threads for Samsung phones, the newer the better, one close enough like S20 or S21 will do.
3mel said:
for getting rid of the crap apps, look up ADB debloat threads for Samsung phones, the newer the better, one close enough like S20 or S21 will do.
Click to expand...
Click to collapse
There are some S20FE specific ones in this S20FE section.