Xprivacy Lua doesn't seem to be working on Android 11 AOSP based custom ROM.
Installed using LSposed.
App ops also doesn't seem to be working.
Any workaround?
Sjain11 said:
Xprivacy Lua doesn't seem to be working on Android 11 AOSP based custom ROM.
Installed using LSposed.
App ops also doesn't seem to be working.
Any workaround?
Click to expand...
Click to collapse
Can you explain more as to what is not working.
Device and what rom your using may help.
How have you setup lsposed. If you are going to set restriction in xpl for all apps have you selected all apps in lsposed.
What app ops are you using as wasn't aware it an exposed module.
spawnlives said:
Can you explain more as to what is not working.
Device and what rom your using may help.
How have you setup lsposed. If ypu are going to set restriction in xpl for all apps have you selected all apps in lsposed.
What app ops are you using as wasn't aware it an exposed module.
Click to expand...
Click to collapse
Wow thanks. Selecting all apps in LSposed worked.
Hi, I just had the same problem and found this thread and resolved the issue, thanks!
Question: Is there a way to default so that new apps are automatically selected when installed?
markd89 said:
Hi, I just had the same problem and found this thread and resolved the issue, thanks!
Question: Is there a way to default so that new apps are automatically selected when installed?
Click to expand...
Click to collapse
On LSposed no.
Any new app will have to be enabled in LSposed for xprivacylua to work.
I don't think that option will be included any time soon, if at all.
spawnlives said:
On LSposed no.
Any new app will have to be enabled in LSposed for xprivacylua to work.
I don't think that option will be included any time soon, if at all.
Click to expand...
Click to collapse
I think that's an important capablilty, otherwise things will leak on first run.
I tried installed Edxposed but get this issue please install riru from magisk manager
The comments on that issue say Edxposed is not longer supported ant to use LSPosed, Taichi or Dreamland instead. Does Taichi or Dreamland allow for new apps to default to be restricted?
Thanks again!
markd89 said:
I think that's an important capablilty, otherwise things will leak on first run.
I tried installed Edxposed but get this issue please install riru from magisk manager
The comments on that issue say Edxposed is not longer supported ant to use LSPosed, Taichi or Dreamland instead. Does Taichi or Dreamland allow for new apps to default to be restricted?
Thanks again!
Click to expand...
Click to collapse
If you want to use Edxposed you will have to downgrade Rui core module ( in magisk ) to version under 25. I think the latest working version was 25.5.5 ( from memory ).
As for Taichi, Dreamland and other Xposed like frameworks i don't know never used them.
I have be using Xposed since the Jellybean ( android 4 ) and have only install rovo's version ( up to android 8 ), then started using Edxposed ( currently on now ). The only reason i'm not using Lsposed at the moment is laziness on my part because of the extra steps involved.
Note: not all modules will require every app in Lsposed to be activated it will depend on what the module does.
@spawnlives thank you!
I got Edxposed working with Riru 25.4.4 https://github.com/RikkaApps/Riru/releases/tag/v25.4.4
To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?
JazonX said:
To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?
Click to expand...
Click to collapse
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).
spawnlives said:
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).
Click to expand...
Click to collapse
For reference the post about automatically adding newly installed apps to LSPosed scopes is here:
LSPosed Xposed Framework [8.1-13.0]. Simple Magisk Module
Developers: LSPosed Developers Homepage: GitHub ✱ Requirements: • Magisk 21+ • Android 8.1-13 • Riru(NOT NEEDED) USE ZYGISK Description: Riru module providing ART interception framework (natively for Android Pie) that provides consistent API...
forum.xda-developers.com
markd89 said:
@spawnlives thank you!
I got Edxposed working with Riru 25.4.4 https://github.com/RikkaApps/Riru/releases/tag/v25.4.4
Click to expand...
Click to collapse
JazonX said:
To use XprivacyLua on Android 11 - Which one should I get ?
Edxposed or Lsposed ?
Click to expand...
Click to collapse
spawnlives said:
Depends on magisk version
I am using stable magisk with latest versions of riu and lsposed.
Lsposed with modules you have to select what apps to restrict.
Big thanks to @Fif_ for automatic selecting modules.
Edxpoesd has two modes but you have to downgrade riu module for it it work.
With regards to expricavylua working fine on stable magisk /latest versions of riu/lsposed on S9 running lineage 18.1 (A11).
Click to expand...
Click to collapse
As stated in post #8 EdXposed is also working with stable Magisk v23.0, but only using Riru 25.4.4 and lower. Advantage for me is that I don't have to add new apps to the scope like in Lsposed. Even with Fif's Automate flow, I would forget to reboot
Related
Well before Magisk was in our lives, the Xposed framework was where all the mods and magic happened.
Ed Xposed Developers Solohsu, givien2u, riru core developer Rikka released beta version that supports Android 10 also now, so It may now be compatible with Android 10, but there are still some bugs to be worked out — So this thread is all in one place for find the modules
For Pie Supported modules Refer the thread - https://forum.xda-developers.com/xposed/list-xposed-modules-android-pie-ed-t3892768
IMP Note For Android 10 - Need to download a separate beta version of the EdXposed module instead of using the one from the Magisk Manager app. Not sure why latest beta not added in Magisk repo.
Riru Core
Riru Edxposed
Xposed Installer
Users can try and comment supported modules in comments section.I will regularly update the thread so this list which makes it lot easier for all the xposed Android 10 users.
WORKING MODULES:
App Locale 2
afwall+
Dark Tricks
Exi for swiftkey
Fingerprint pay
Gravity Box
instaprefs (initial release)
lataclysm
MinMinGuard
SudoHide
Tweeks (initial release)
WaTweaker
XPrivacyLua
UNCONFIRMED MODULES
100M+ memory saver
Always Correct
Android App theme engine
App settings*
ART Deoptimiser
Blur System UI*
Boot Manager
Buttered toast
Complete Action Plus
CustomShare
Enhanced Toast
Fingerprint quick actions
Flat style keyboard
Flat Style Module
FM Radio Without Headphones
Force Fast Scroll
Force touch detector
FSCB
G3 TweakToolbox
Google Offline Voice
HTC One Tweaker
Installer Opt
InstantFaceUnlock
KT2
L Tweaks
Lockscreen clock mods
Neo power menu*
Net strength
Network Speed Indicator for OnePlus
No Keyboard Auto Popup
No Lock Home
No More Google Play Services
Notify Clean
Prevent Running*
Remember IME
RootToolsNeo
ScreenOff Animation
Swipe Back2
WhatsApp Extensions
WhatsApp theme engine
X Halo Floating Windows
XGram
Xposed Additions
Xposed Groot
Xposed macro expand
XQS Backgrounds
Xstana
Xvoice changer
At the time of writing this thread, Gravitybox only supported for Q
Imp Note for Oneplus users who are trying to root and stuck at bootloop/fastboot message after android 10 update
Oneplus has blocked fastboot boot command so there is a details guide available in the thread - https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213
My module (Dark Tricks) works on Android Q too.
https://forum.xda-developers.com/xposed/modules/mod-dark-tricks-t3750586/amp/
I have these modules working well on my pixel 3 with November updates.
0455 beta YAHFA +Riru-core 19.5 + latest custom magisk
CustoMIUIzer (For MIUI) (some mods doesn't work but 95% of them are working)
Sudohide 1.28 (or you can try 1.28.3 modded version by Mikanoshi)
Keyboard animation tweak
unclutter IG
These are working fine on my Xiaomi Mi 9T MIUI 11 based on Android 10 rom
with official Magisk 20.1 and Modded Sandhook (tried Yahfa also working) 4471 by Dark_Eyes_
Even these modules are compatible to android 10, they may have failed at Safetynet check !!
So carefully if you're using google pay...
Kris
Confirm this modules is work on Android 10
Exi for swiftkey
SudoHide
i'm using riru core 19.5, edxposed v0.4.6.0 yahfa, edxposed installer 2.2.5:
xprivacylua, greenify, gravitybox does NOT work
afwall+ works
It is supposed to use edxposed manager with latest exposed build?
Build 0455 YAHFA here, gravitybox works
anonxlg said:
i'm using riru core 19.5, edxposed v0.4.6.0 yahfa, edxposed installer 2.2.5:
xprivacylua, greenify, gravitybox does NOT work
afwall+ works
Click to expand...
Click to collapse
xprivacylua don't work
10.0.0 (QQ1A.191205.011, Dec 2019), riru core 19.5, edxposed v0.4.6.0 yahfa or sandhook, edxposed installer 2.2.5
bush911 said:
It is supposed to use edxposed manager with latest exposed build?
Build 0455 YAHFA here, gravitybox works
Click to expand...
Click to collapse
bush911 said:
It is supposed to use edxposed manager with latest exposed build?
Build 0455 YAHFA here, gravitybox works
Click to expand...
Click to collapse
not sure what you mean but:
v0.4.6.0_beta
@solohsu solohsu released this Oct 21, 2019 · 7 commits to master since this release
Changelogs
Add support for Android 10
Click to expand...
Click to collapse
I also tried installing xprivacylua and it wouldn't install (it downloads and then it just stops)
njtony said:
xprivacylua don't work
10.0.0 (QQ1A.191205.011, Dec 2019), riru core 19.5, edxposed v0.4.6.0 yahfa or sandhook, edxposed installer 2.2.5
Click to expand...
Click to collapse
XPrivacyLua works for many people on Android 10.
M66B said:
XPrivacyLua works for many people on Android 10.
Click to expand...
Click to collapse
XPrivacyLua is works now
edxposed v0.4.6.0 yahfa does not work
edxposed v0.4.5.5 yahfa works fine
Modules List Update
Alltrans, MinMinGuard, HiddenCore, and Xposed Edge confirmed working on Q.
Soumy1234 said:
Alltrans, MinMinGuard, HiddenCore, and Xposed Edge confirmed working on Q.
Click to expand...
Click to collapse
What version of min min? And what versions of the edxposed zips?
CounterC said:
What version of min min? And what versions of the edxposed zips?
Click to expand...
Click to collapse
Latest version of MinMin (2.1.1) and Edxposed 0.4.6.1 (4491) from Canary tab of Edxposed Manager.
Soumy1234 said:
Latest version of MinMin (2.1.1) and Edxposed 0.4.6.1 (4491) from Canary tab of Edxposed Manager.
Click to expand...
Click to collapse
what went wrong here?
CounterC said:
what went wrong here?
Click to expand...
Click to collapse
Did you install the Riru Core Magisk Module?
Say hello to... EdXposed, successor of Xposed!:laugh:
EdXposed is a Riru module, trying to provide an ART hooking framework which delivers consistent APIs with the original Xposed, open-source, stable, low invasiveness and fast.
Support Android Oreo, Pie, Q and R, that means you can use Xposed framework in latest Android!:fingers-crossed:
Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations.
Click to expand...
Click to collapse
Advantages:
Low invasiveness. Based on Riru, so EdXposed no longer need to replace app_process, it is more difficult to detect.(due to some bugs of Magisk, it can still be detected by a few applications)
Fully open-source and free. We are very concerned about your device security and user privacy, so we are fully open source with GPLv3 license.
Easy recovered. Based on Magisk, just disable EdXposed in Magisk Manager, you can recover from brick.
Fast. EdXposed use SandHook and YAHFA as the hook core to provide a faster experience than other cores.
Fully compatible. The API that is exactly the same as the original Xposed is provided. In general, there is no need to make special adaption to EdXposed.
Stable. EdXposed has updated many versions, and gradually stabilized.
Non-virtual. Edxposed is the REAL xposed framework, not the virtual framework.
Supported Versions:
Android R (11)[sdk30]
Android Q (10)[sdk29]
Android Pie (9)[sdk28]
Android Oreo (8.x)[sdk26/27]
For Android Nougat (7.x) and lower, please read our Wiki
Download:
Edxposed has three different builds
Stable：Stable version after passing the test, suitable for general users, update slowly. Download Stable version in Magisk Manager's [Downloads] tab
Alpha: Test version with multiple commits. Download Alpha version in [Github Releases]
Canary: Debug version. Automatically build by CI. Download Canary version in [EdXposed Manager]
Install:
You'd better understand what you are doing and have the ability to recover from brick. Otherwise, please do not use any variant Xposed.
I'm not responsible for anything you do with your phone/tablet/tv/watch/auto/induction cooker.
Install Magisk v21.4+
Install Riru-Core v23+ from Magisk repo.
Install EdXposed from Magisk repo.
Install EdXposed Manager.
Reboot.
Have fun!
Help:
If you have any problems, please try to use the latest version of Canary channel, which may fix your problems.
If the problem is not solved, try to ask in the community
If the problem persists, please report the problem in GitHub Issues.
For Developers:
Developers are welcomed to write Xposed modules with hooks based on EdXposed Framework. Module written based on EdXposed framework is fully compatible with the original Xposed Framework, so contrary a Xposed Framework-based module will work well with the EdXposed framework too.
We use the module repository of the original Xposed, so you simply upload the module to repository, then you can download your module in EdXposed.
Xposed Framework API
Xposed Module Repository
Source Code:
You can find the build tutorial here
https://github.com/ElderDrivers/EdXposed (the C++ and Java part)
https://github.com/ElderDrivers/EdXposedManager (Companion app)
https://github.com/solohsu/XposedInstaller (deprecated Companion app)
https://github.com/solohsu/EdXpManager (deprecated Companion app)
Credits:
@MlgmXyysd and @solohsu, the main creators
All the translators: https://github.com/ElderDrivers/EdXposedManager (if you want to contribute more translations, Please submit Pull Requests to us)
@rovo89, created the original Xposed
@topjohnwu, created the Magisk, makes all these possible.
XposedBridge, the original Xposed framework APIs
Riru, provides a way to inject codes into zygote process
YAHFA, the core ART hooking framework
dexmaker and dalvikdx, to dynamiclly generate YAHFA hooker classes
Whale, used for inline hooking
SandHook, ART hooking framework for SandHook variant
XDA:DevDB Information
EdXposed, Tool/Utility for the Xposed Framework
Contributors
mlgmxyysd, solohsu
Source Code: https://github.com/ElderDrivers/EdXposed
Version Information
Status: Stable
Current Stable Version: 0.5.2.1
Stable Release Date: 2021-02-03
Current Beta Version: 0.5.2.2
Beta Release Date: 2021-02-08
Created 2020-03-21
Last Updated 2021-02-08
Reserved
Glad to see xposed is still living xD
Thanks for making an official thread for Edxposed! I was wondering what the Compat List in Edxp Manger is for? I looked it up but I found nothing about it.
Soumy1234 said:
Thanks for making an official thread for Edxposed! I was wondering what the Compat List in Edxp Manger is for? I looked it up but I found nothing about it.
Click to expand...
Click to collapse
Generally not used, for some fc applications can solve the problem and reduce performance
mlgmxyysd said:
Generally not used, for some fc applications can solve the problem and reduce performance
Click to expand...
Click to collapse
Thank you for the answer. I've been wondering about this for months...
Hi, can anyone help me with this ?
I'm getting this error and no module can be loaded
677 677 E EdXposed-Bridge: Cannot load any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
vaykossil said:
Hi, can anyone help me with this ?
I'm getting this error and no module can be loaded
677 677 E EdXposed-Bridge: Cannot load any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
Click to expand...
Click to collapse
Well, i guess sepolicy not truly allowed, can u provide ur device info?
Umm...This DEV thread is linked in the 'Xposed GENERAL' stickies...It's kinda misleading as I thought it was a general link for USER questions and related posts...but it's actually a thread in the Xposed Framework Development section. JS...you'll prolly get a lot of 'general' EdXposed user inquiries.
Zaxx32 said:
Umm...This DEV thread is linked in the 'Xposed GENERAL' stickies...It's kinda misleading as I thought it was a general link for USER questions and related posts...but it's actually a thread in the Xposed Framework Development section. JS...you'll prolly get a lot of 'general' EdXposed user inquiries.
Click to expand...
Click to collapse
This is because DevDB can only select sub-sections when publishing threads.
If I choose Modules, it is definitely more inappropriate.
Welcom! [掏出我的工地English]
hi, is there any way to pass safety net?
Enviado desde mi SM-G955F mediante Tapatalk
siderin said:
hi, is there any way to pass safety net?
Enviado desde mi SM-G955F mediante Tapatalk
Click to expand...
Click to collapse
Yes
Open EdXposed Manager > Settings (in hamburger menu).
Scroll till the bottom & tick "App List mode", "Force hook modules" & "Pass SafetyNet"
Reboot & you'll be able to pass SafetyNet.
Also make sure to add the Banking apps/other apps which require passing SafetyNet in the Black list (Applications in Hamburger menu).
Sent from my #FlagshipKiller6T using Tapatalk
DarkSJ1998 said:
Yes
Open EdXposed Manager > Settings (in hamburger menu).
Scroll till the bottom & tick "App List mode", "Force hook modules" & "Pass SafetyNet"
Reboot & you'll be able to pass SafetyNet.
Also make sure to add the Banking apps/other apps which require passing SafetyNet in the Black list (Applications in Hamburger menu).
Sent from my #FlagshipKiller6T using Tapatalk
Click to expand...
Click to collapse
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Gautham0123 said:
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Click to expand...
Click to collapse
Can't say anything as I've never used Snapchat... But yes I've seen a special Snapchat EdXposed build in EdXposed Manager app. You can try it. Use TitaniumBackup to backup the current state of Snapchat app, if it stops working, you can simply restore backup without uninstalling & reinstalling the app. That's what I do for Google Pay
Sent from my #FlagshipKiller6T using Tapatalk
Gautham0123 said:
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Click to expand...
Click to collapse
Yes, but there is the special Snapchat Edxposed in Edxposed Manager. I currently use it and I've never been locked out.
Soumy1234 said:
Yes, but there is the special Snapchat Edxposed in Edxposed Manager. I currently use it and I've never been locked out.
Click to expand...
Click to collapse
Right now I have magisk and used magisk hide for Snapchat. How exactly do I install edxposed and install Snapchat edxposed now without getting locked? Can you please explain stepwise?
Gautham0123 said:
Right now I have magisk and used magisk hide for Snapchat. How exactly do I install edxposed and install Snapchat edxposed now without getting locked? Can you please explain stepwise?
Click to expand...
Click to collapse
Sure.
Go to Edxposed Manager.
There should be a Snapchat tab among the tabs at the top. Tap that.
There will be a drop down menu where you can choose between the Sandhook and the Yahfa version (I'd recommend Yahfa since it's more stable).
After you select your build, tap on Install/Update.
This will download the zip onto your internal storage (Downloads folder).
Now exit Edxposed Manager and go to Magisk Manager.
Go to Downloads and install the Riru Core module.
Then go to Modules, tap the + icon and look for the Edxposed zip that you downloaded earlier and flash that.
Reboot and profit. The reboot may take some time so please be patient.
Soumy1234 said:
Sure.
Go to Edxposed Manager.
There should be a Snapchat tab among the tabs at the top. Tap that.
There will be a drop down menu where you can choose between the Sandhook and the Yahfa version (I'd recommend Yahfa since it's more stable).
After you select your build, tap on Install/Update.
This will download the zip onto your internal storage (Downloads folder).
Now exit Edxposed Manager and go to Magisk Manager.
Go to Downloads and install the Riru Core module.
Then go to Modules, tap the + icon and look for the Edxposed zip that you downloaded earlier and flash that.
Reboot and profit. The reboot may take some time so please be patient.
Click to expand...
Click to collapse
Do I have to uninstall Snapchat before installing edxposed? Do I have to log out or take titanium backup?
Gautham0123 said:
Do I have to uninstall Snapchat before installing edxposed? Do I have to log out or take titanium backup?
Click to expand...
Click to collapse
Nope, but maybe take a backup of Snapchat just in case.
Say hello to... EdXposed, successor of Xposed!:laugh:
EdXposed is a Riru module, trying to provide an ART hooking framework which delivers consistent APIs with the original Xposed, open-source, stable, low invasiveness and fast.
Support Android Oreo, Pie, Q and R, that means you can use Xposed framework in latest Android!:fingers-crossed:
Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations.
Click to expand...
Click to collapse
Advantages:
Low invasiveness. Based on Riru, so EdXposed no longer need to replace app_process, it is more difficult to detect.(due to some bugs of Magisk, it can still be detected by a few applications)
Fully open-source and free. We are very concerned about your device security and user privacy, so we are fully open source with GPLv3 license.
Easy recovered. Based on Magisk, just disable EdXposed in Magisk Manager, you can recover from brick.
Fast. EdXposed use SandHook and YAHFA as the hook core to provide a faster experience than other cores.
Fully compatible. The API that is exactly the same as the original Xposed is provided. In general, there is no need to make special adaption to EdXposed.
Stable. EdXposed has updated many versions, and gradually stabilized.
Non-virtual. Edxposed is the REAL xposed framework, not the virtual framework.
Supported Versions:
Android R (11)[sdk30]
Android Q (10)[sdk29]
Android Pie (9)[sdk28]
Android Oreo (8.x)[sdk26/27]
For Android Nougat (7.x) and lower, please read our Wiki
Download:
Edxposed has three different builds
Stable：Stable version after passing the test, suitable for general users, update slowly. Download Stable version in Magisk Manager's [Downloads] tab
Alpha: Test version with multiple commits. Download Alpha version in [Github Releases]
Canary: Debug version. Automatically build by CI. Download Canary version in [EdXposed Manager]
Install:
You'd better understand what you are doing and have the ability to recover from brick. Otherwise, please do not use any variant Xposed.
I'm not responsible for anything you do with your phone/tablet/tv/watch/auto/induction cooker.
Install Magisk v21.4+
Install Riru-Core v23+ from Magisk repo.
Install EdXposed from Magisk repo.
Install EdXposed Manager.
Reboot.
Have fun!
Help:
If you have any problems, please try to use the latest version of Canary channel, which may fix your problems.
If the problem is not solved, try to ask in the community
If the problem persists, please report the problem in GitHub Issues.
For Developers:
Developers are welcomed to write Xposed modules with hooks based on EdXposed Framework. Module written based on EdXposed framework is fully compatible with the original Xposed Framework, so contrary a Xposed Framework-based module will work well with the EdXposed framework too.
We use the module repository of the original Xposed, so you simply upload the module to repository, then you can download your module in EdXposed.
Xposed Framework API
Xposed Module Repository
Source Code:
You can find the build tutorial here
https://github.com/ElderDrivers/EdXposed (the C++ and Java part)
https://github.com/ElderDrivers/EdXposedManager (Companion app)
https://github.com/solohsu/XposedInstaller (deprecated Companion app)
https://github.com/solohsu/EdXpManager (deprecated Companion app)
Credits:
@MlgmXyysd and @solohsu, the main creators
All the translators: https://github.com/ElderDrivers/EdXposedManager (if you want to contribute more translations, Please submit Pull Requests to us)
@rovo89, created the original Xposed
@topjohnwu, created the Magisk, makes all these possible.
XposedBridge, the original Xposed framework APIs
Riru, provides a way to inject codes into zygote process
YAHFA, the core ART hooking framework
dexmaker and dalvikdx, to dynamiclly generate YAHFA hooker classes
Whale, used for inline hooking
SandHook, ART hooking framework for SandHook variant
XDA:DevDB Information
EdXposed, Tool/Utility for the Xposed Framework
Contributors
mlgmxyysd, solohsu
Source Code: https://github.com/ElderDrivers/EdXposed
Version Information
Status: Stable
Current Stable Version: 0.5.2.1
Stable Release Date: 2021-02-03
Current Beta Version: 0.5.2.2
Beta Release Date: 2021-02-08
Created 2020-03-21
Last Updated 2021-02-08
Reserved
Glad to see xposed is still living xD
Thanks for making an official thread for Edxposed! I was wondering what the Compat List in Edxp Manger is for? I looked it up but I found nothing about it.
Soumy1234 said:
Thanks for making an official thread for Edxposed! I was wondering what the Compat List in Edxp Manger is for? I looked it up but I found nothing about it.
Click to expand...
Click to collapse
Generally not used, for some fc applications can solve the problem and reduce performance
mlgmxyysd said:
Generally not used, for some fc applications can solve the problem and reduce performance
Click to expand...
Click to collapse
Thank you for the answer. I've been wondering about this for months...
Hi, can anyone help me with this ?
I'm getting this error and no module can be loaded
677 677 E EdXposed-Bridge: Cannot load any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
vaykossil said:
Hi, can anyone help me with this ?
I'm getting this error and no module can be loaded
677 677 E EdXposed-Bridge: Cannot load any modules because /data/user_de/0/org.meowcat.edxposed.manager/conf/modules.list was not found
Click to expand...
Click to collapse
Well, i guess sepolicy not truly allowed, can u provide ur device info?
Umm...This DEV thread is linked in the 'Xposed GENERAL' stickies...It's kinda misleading as I thought it was a general link for USER questions and related posts...but it's actually a thread in the Xposed Framework Development section. JS...you'll prolly get a lot of 'general' EdXposed user inquiries.
Zaxx32 said:
Umm...This DEV thread is linked in the 'Xposed GENERAL' stickies...It's kinda misleading as I thought it was a general link for USER questions and related posts...but it's actually a thread in the Xposed Framework Development section. JS...you'll prolly get a lot of 'general' EdXposed user inquiries.
Click to expand...
Click to collapse
This is because DevDB can only select sub-sections when publishing threads.
If I choose Modules, it is definitely more inappropriate.
Welcom! [掏出我的工地English]
hi, is there any way to pass safety net?
Enviado desde mi SM-G955F mediante Tapatalk
siderin said:
hi, is there any way to pass safety net?
Enviado desde mi SM-G955F mediante Tapatalk
Click to expand...
Click to collapse
Yes
Open EdXposed Manager > Settings (in hamburger menu).
Scroll till the bottom & tick "App List mode", "Force hook modules" & "Pass SafetyNet"
Reboot & you'll be able to pass SafetyNet.
Also make sure to add the Banking apps/other apps which require passing SafetyNet in the Black list (Applications in Hamburger menu).
Sent from my #FlagshipKiller6T using Tapatalk
DarkSJ1998 said:
Yes
Open EdXposed Manager > Settings (in hamburger menu).
Scroll till the bottom & tick "App List mode", "Force hook modules" & "Pass SafetyNet"
Reboot & you'll be able to pass SafetyNet.
Also make sure to add the Banking apps/other apps which require passing SafetyNet in the Black list (Applications in Hamburger menu).
Sent from my #FlagshipKiller6T using Tapatalk
Click to expand...
Click to collapse
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Gautham0123 said:
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Click to expand...
Click to collapse
Can't say anything as I've never used Snapchat... But yes I've seen a special Snapchat EdXposed build in EdXposed Manager app. You can try it. Use TitaniumBackup to backup the current state of Snapchat app, if it stops working, you can simply restore backup without uninstalling & reinstalling the app. That's what I do for Google Pay
Sent from my #FlagshipKiller6T using Tapatalk
Gautham0123 said:
Does Snapchat detect xposed? Does it cause account to get locked? Is there any walk around?
Click to expand...
Click to collapse
Yes, but there is the special Snapchat Edxposed in Edxposed Manager. I currently use it and I've never been locked out.
Soumy1234 said:
Yes, but there is the special Snapchat Edxposed in Edxposed Manager. I currently use it and I've never been locked out.
Click to expand...
Click to collapse
Right now I have magisk and used magisk hide for Snapchat. How exactly do I install edxposed and install Snapchat edxposed now without getting locked? Can you please explain stepwise?
Gautham0123 said:
Right now I have magisk and used magisk hide for Snapchat. How exactly do I install edxposed and install Snapchat edxposed now without getting locked? Can you please explain stepwise?
Click to expand...
Click to collapse
Sure.
Go to Edxposed Manager.
There should be a Snapchat tab among the tabs at the top. Tap that.
There will be a drop down menu where you can choose between the Sandhook and the Yahfa version (I'd recommend Yahfa since it's more stable).
After you select your build, tap on Install/Update.
This will download the zip onto your internal storage (Downloads folder).
Now exit Edxposed Manager and go to Magisk Manager.
Go to Downloads and install the Riru Core module.
Then go to Modules, tap the + icon and look for the Edxposed zip that you downloaded earlier and flash that.
Reboot and profit. The reboot may take some time so please be patient.
Soumy1234 said:
Sure.
Go to Edxposed Manager.
There should be a Snapchat tab among the tabs at the top. Tap that.
There will be a drop down menu where you can choose between the Sandhook and the Yahfa version (I'd recommend Yahfa since it's more stable).
After you select your build, tap on Install/Update.
This will download the zip onto your internal storage (Downloads folder).
Now exit Edxposed Manager and go to Magisk Manager.
Go to Downloads and install the Riru Core module.
Then go to Modules, tap the + icon and look for the Edxposed zip that you downloaded earlier and flash that.
Reboot and profit. The reboot may take some time so please be patient.
Click to expand...
Click to collapse
Do I have to uninstall Snapchat before installing edxposed? Do I have to log out or take titanium backup?
Gautham0123 said:
Do I have to uninstall Snapchat before installing edxposed? Do I have to log out or take titanium backup?
Click to expand...
Click to collapse
Nope, but maybe take a backup of Snapchat just in case.
An alternative way for Android 10 (Tested), Android 11 (Tested) & probs recently launched Android 12 (Not tested) If someone is using A12. Please do check. It should work.
1- Download & Install Riru from Magisk repository (Reboot)
2- Download & Install Riru - LSposed from Magisk repository (Reboot)
3- Download & install mockmocklocation app from xposed repos.
4- Switch on the mockmocklocation module inside LSposed app.
5- Switch on the module inside the LSposed app (Tick mark) for the app you want to spoof. For e.g Pokemon go or any app which you want to spoof.
6- Reboot.
This alternative way is basically for A12 however it's not tested but it should work. Try!
It's simple & easy. Until @fOmey doesn't update the patch for A12
Ok this works....just missing the steps to install magisk..make it pass safetynet..if anyone needs help message me
I can only get magisk canary working on android 12 on my device... Can i install modules, if so were can i get them? Thank you!
EDIT: Already responding to myself, to people asking, just search for Foxmmm on github.
noobSU said:
An alternative way for Android 10 (Tested), Android 11 (Tested) & probs recently launched Android 12 (Not tested) If someone is using A12. Please do check. It should work.
1- Download & Install Riru from Magisk repository (Reboot)
2- Download & Install Riru - LSposed from Magisk repository (Reboot)
3- Download & install mockmocklocation app from xposed repos.
4- Switch on the mockmocklocation module inside LSposed app.
5- Switch on the module inside the LSposed app (Tick mark) for the app you want to spoof. For e.g Pokemon go or any app which you want to spoof.
6- Reboot.
This alternative way is basically for A12 however it's not tested but it should work. Try!
It's simple & easy. Until @fOmey doesn't update the patch for A12
Click to expand...
Click to collapse
hello how to hide root from apps if zygisk denylist is off? because if i turn on denylist mock.mock location will not work
hasbulah said:
hello how to hide root from apps if zygisk denylist is off? because if i turn on denylist mock.mock location will not work
Click to expand...
Click to collapse
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.
noobSU said:
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.
Click to expand...
Click to collapse
thank you very much, u save me from downgared my device running miui 13
noobSU said:
Use magisk alpha with magisk hide support. & Add only google play service to get safetynet pass.
Click to expand...
Click to collapse
oh wow is there Magisk Alpha that still supports magisk hide in for android 12? please kindly help with it.
I have a magisk v24.3. I need a list of programs from Edexposed. To pass the Safetynet check, I enable the zygisk function, but when I enable this function, the Riru module immediately stops working.
So, if I use edexposed, I cannot pass Safetynet check (because zygisk is disabled), but if I pass Safetynet check, I cannot use Edexposed. What if I have to change the version of Magisk to solve this problem? If this is the only solution to this problem, what version of Magisk do you recommend?
p.s Again, my main concern is that Edexposed can work and I can pass the Safetynet check.
________________________
I use the phone model Xiaomi redmi note 7 (MIUI Global 11)
Android version : 9
twrpdnyskqw said:
I have a magisk v24.3. I need a list of programs from Edexposed. To pass the Safetynet check, I enable the zygisk function, but when I enable this function, the Riru module immediately stops working.
So, if I use edexposed, I cannot pass Safetynet check (because zygisk is disabled), but if I pass Safetynet check, I cannot use Edexposed. What if I have to change the version of Magisk to solve this problem? If this is the only solution to this problem, what version of Magisk do you recommend?
p.s Again, my main concern is that Edexposed can work and I can pass the Safetynet check.
________________________
I use the phone model Xiaomi redmi note 7 (MIUI Global 11)
Android version : 9
Click to expand...
Click to collapse
Why dont you use LSPosed instead? EdXposed is probably disontinued (although not announced officially, its practically dead), LSPosed is much more up-to-date and you can easily pass SafetyNet with it. It works bit differently than EdXposed, so you'd have to read wiki.
By the way, Zygisk isn't compatible with Riru because they work in a similar manner. Riru is deprecated, use Zygisk version of modules
Lord Sithek said:
Why dont you use LSPosed instead? EdXposed is probably disontinued (although not announced officially, its practically dead), LSPosed is much more up-to-date and you can easily pass SafetyNet with it. It works bit differently than EdXposed, so you'd have to read wiki.
By the way, Zygisk isn't compatible with Riru because they work in a similar manner. Riru is deprecated, use Zygisk version of modules
Click to expand...
Click to collapse
Thanks for the feedback bro. I already tried LSposed but LSposed doesn't have the apps I need, for example I need Device ID Masker - it does the swapping of the device hardware (imei) and other parameters and it's a paid app. I also need RootCloak - it hides the root.
Do you think there is a good analogue for LSposed?
twrpdnyskqw said:
Thanks for the feedback bro. I already tried LSposed but LSposed doesn't have the apps I need, for example I need Device ID Masker - it does the swapping of the device hardware (imei) and other parameters and it's a paid app. I also need RootCloak - it hides the root.
Do you think there is a good analogue for LSposed?
Click to expand...
Click to collapse
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases
Lord Sithek said:
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases
Click to expand...
Click to collapse
Thanks bro, you're the best!
twrpdnyskqw said:
Thanks bro, you're the best!
Click to expand...
Click to collapse
You're welcome If you will need any help, let me know. I'm not an expert, but I can try to help. Good luck
Lord Sithek said:
All modules that works on EdXposed will work on LSPosed too (or almost all) since its the same Xposed Framework, just implemented differently. And Xposed modules aren't limited by those present in the repository. You can download them from another source and install, then enable in the manager and use.
For example, you can download both of your modules from this sources:
Device ID Masker Lite | Xposed Module Repository
repo.xposed.info
RootCloak (with 5.x and 6.x support) | Xposed Module Repository
repo.xposed.info
And by the way - both of these modules seems to be outdated (especially RootCloack). As a replacement for the first one, you can use Android Faker (https://repo.xposed.info/module/com.android1500.androidfaker) - updated regularly. As for hiding root, right now there are much more reliable solutions than Xposed modules. But what you need, depends on what apps/tools you need to hide root from. You should take a look on this thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/
Depending on your usage, you may need Universal SafetyNet Fix module, Shamiko or just to use Enforce DenyList in Magisk settings. In rare situations, there is a need to hide apps with root access from other apps (like bank apps), and HideMyApplist Xposed module helps in that cases
Click to expand...
Click to collapse
thank you so much it helped me too.