Bro i installed custom rom i flashed file that stuck my phone i want to install stock rom but cant enter download mode. I press volume down key and up key then connect to cable. It move to twrp or angain to rom.
ArtDesigner said:
Bro i installed custom rom i flashed file that stuck my phone i want to install stock rom but cant enter download mode. I press volume down key and up key then connect to cable. It move to twrp or angain to rom.
Click to expand...
Click to collapse
flash stock ROM with twrp and go to download mode
Related
SO here it goes....
1. Rooted phone
2. Installed Clockworkmod recovery tool
3. Flashed a lot of CM Roms.
4. Flashed eaglesblood Rom, works fine but now I cant enter recovery mode. (Power button+Vol down button)
Please help as I wanna Flash a different ROM and I really need to know how can i enter the recovery mode.
During boot when i try entering the recovery mode the phone just runs normally and switches on and doesnt enter the recovery mode..
PLEASE HELP
amarverma06 said:
SO here it goes....
1. Rooted phone
2. Installed Clockworkmod recovery tool
3. Flashed a lot of CM Roms.
4. Flashed eaglesblood Rom, works fine but now I cant enter recovery mode. (Power button+Vol down button)
Please help as I wanna Flash a different ROM and I really need to know how can i enter the recovery mode.
During boot when i try entering the recovery mode the phone just runs normally and switches on and doesnt enter the recovery mode..
PLEASE HELP
Click to expand...
Click to collapse
Rebooting in into recovery or boot loader directly from ABD For beginners:
http://forum.xda-developers.com/showthread.php?t=1853159
[HOW TO] Flashing ClockworkMod via ADB:
http://forum.xda-developers.com/showthread.php?t=1608042
please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
wuffi123 said:
please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
Click to expand...
Click to collapse
Try to put the update.zip in the dload folder. Then go to local update.
That did the trick for me.
By the way: you enter recovery by: volume + and power. Hold the power button untill the phone vibrates. Then release the power button but hold the volume +
Same issue. I rooted and installed TWRP, bootloader is unlocked. My version is L10. I can't seem to get any rom to work though. Tried updating to emui 3.0. boot loop. Tried flashing myrom 3.3. boot loop. Tried fastboot flashing recovery to stock 609 recovery, now recovery won't load. flash back to twrp, and it works. I am going to try this update.zip thing, but please let me know if there is a way to safely get to a new rom. Stuck with emui 2.3 or whatever, is very annoying. b127, and it won't download an ota, says it's already latest version
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
ArticK said:
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
Click to expand...
Click to collapse
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
anarchtic said:
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
Click to expand...
Click to collapse
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
ArticK said:
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
Click to expand...
Click to collapse
yes your right, and I will edit
anarchtic said:
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Click to expand...
Click to collapse
Pls boss I did not understand the procedure to root..u said when we click on reboot in twrp recovery we should den press bootloader and den it will prompt us to root.
Which button do I press to for the bootloader
i installed the rom from the mentioned link above, however , now when i press volume + & power, i go into a wired recovery, an image of an open android with red exclatmation mark with no text, no choices or nothing,
the reason i wanted recovery is to flash marshmallow on my 2gb ram x510, now there is nothing any clue ?
small problems make depressed
excuse all .
I was new here . and want to learn .
I have a problem with hot android 2 me.I can not enter into TWRP menu by turning off my android , and menghidupkanya by pressing a few buttons such as Vol +/- buttons with power button . no reaction .
is there any other way? or non- root application that can go directly to TWRP .
the position of an existing room in marshmallows , I want to root my android .:angel::angel::angel:
I worked all the steps but the device does not respond and the program does not do anything happens
What is the solution device does not work
I can't download the x510 rom. When I click on the download link, it takes me to Google Drive where I find 'Empty Folder' message. Please help.
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Dragunz said:
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Click to expand...
Click to collapse
What?
Recovery For Sm-j111f
TWRP Custom Recovery
Download Twrp:
https://drive.google.com/file/d/0B-XcW9YJpyynS1ZvOFFZblB4aFU/view?usp=drivesdk
INSTRUCTUIONS:
1. Download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link above.
3.You Need To Install Samsung USB Driver .
4. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable
5. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is ooted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
There is a bug After installing the custom recovery It cant mound Phons Extarnal SD Card
.
So you have to Reset your device using TWRP. Then It working Properly
Now Enjoy
any costume rom for sm j111f ?
Thanks. I will try it out after my warranty expires
Any mirror for the recovery?
Will root brick my phone?
I followed the steps in this guide attempting to flash a rom. https://forum.xda-developers.com/tm...lopment/rom-stock-debloated-deodexed-t3423387
I was able to flash the BL and modem no problem. I proceeded to flash twrp and have been stuck at boot since. I can only go back into DL mode. Read a few places that said to reinstall rom. How do i go about installing a rom via odin? Any help is greatly appreciated.
jleed88 said:
I followed the steps in this guide attempting to flash a rom. https://forum.xda-developers.com/tm...lopment/rom-stock-debloated-deodexed-t3423387
I was able to flash the BL and modem no problem. I proceeded to flash twrp and have been stuck at boot since. I can only go back into DL mode. Read a few places that said to reinstall rom. How do i go about installing a rom via odin? Any help is greatly appreciated.
Click to expand...
Click to collapse
Okay. Here's what you do...
First, boot to DOWNLOAD MODE. Once in Download Mode, press the keys again like you are booting to Download Mode (VOLUME DOWN + HOME + POWER)
Watch the screen while holding the keys. When the screen goes blank, switch to the key combination for booting RECOVERY (VOLUME UP + HOME + POWER) and hold them until the TWRP screen appears. If the TWRP screen does not appear then we know TWRP didn't stick when you flashed it via Odin.
If the TWRP screen appears, release the keys and let it continue to boot to TWRP.
If TWRP does not boot, then I'd suggest flashing the stock firmware for your device. You can download the stock firmware for your device from www.sammobile.com or from www.updato.com
Sammobile.com is a very slow download unless you pay for a premium account. Updato is much faster. Make sure to select the correct region for your device before downloading the firmware.
Which version of Odin are you using? I've been using 3.12.3 and haven't had any problems at all with this version.
Once you habe downloaded the stock firmware, open Odin. Boot your device to Download Mode and then connect your USB cable. Make sure Odin shows you are connected.
Next, click the OPTIONS TAB in Odin and un-check
AUTO REBOOT. Then, select the AP TAB in Odin and navigate to the firmware file you have downloaded. Let Odin do its thing to verify the file and click START to begin the flash. Once the flash is complete, disconnect the USB Cable and press the key combination for booting to Download Mode again. Once the screen goes black, switch to the key combination for booting RECOVERY. Once in recovery you can select the reboot option to boot your device normally and start fresh from there and attempt to flash TWRP again.
Also, which Note 5 do you have?
fast69mopar said:
Okay. Here's what you do...
First, boot to DOWNLOAD MODE. Once in Download Mode, press the keys again like you are booting to Download Mode (VOLUME DOWN + HOME + POWER)
Watch the screen while holding the keys. When the screen goes blank, switch to the key combination for booting RECOVERY (VOLUME UP + HOME + POWER) and hold them until the TWRP screen appears. If the TWRP screen does not appear then we know TWRP didn't stick when you flashed it via Odin.
If the TWRP screen appears, release the keys and let it continue to boot to TWRP.
If TWRP does not boot, then I'd suggest flashing the stock firmware for your device. You can download the stock firmware for your device from www.sammobile.com or from www.updato.com
Sammobile.com is a very slow download unless you pay for a premium account. Updato is much faster. Make sure to select the correct region for your device before downloading the firmware.
Which version of Odin are you using? I've been using 3.12.3 and haven't had any problems at all with this version.
Once you habe downloaded the stock firmware, open Odin. Boot your device to Download Mode and then connect your USB cable. Make sure Odin shows you are connected.
Next, click the OPTIONS TAB in Odin and un-check
AUTO REBOOT. Then, select the AP TAB in Odin and navigate to the firmware file you have downloaded. Let Odin do its thing to verify the file and click START to begin the flash. Once the flash is complete, disconnect the USB Cable and press the key combination for booting to Download Mode again. Once the screen goes black, switch to the key combination for booting RECOVERY. Once in recovery you can select the reboot option to boot your device normally and start fresh from there and attempt to flash TWRP again.
Also, which Note 5 do you have?
Click to expand...
Click to collapse
Hey, thanks for your response. So I was able to get my System back to working. I had to downoad the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
jleed88 said:
Hey, thanks for your response. So I was able to get my System back to working. I had to downoad the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
Click to expand...
Click to collapse
What you have to do is this...
Flash TWRP, swipe to allow system modifications and then flash the no_verity_opt_encrypt_5.1.zip available from
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
This zip will disable dm-verity and forced encryption in the fstab and allow you to boot normally.
Once this had been done you can flash the root zip of your choice and go to town with debloating, custom ROM's and custom kernels.
jleed88 said:
Hey, thanks for your response. So I was able to get my System back to working. I had to download the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
Click to expand...
Click to collapse
fast69mopar said:
What you have to do is this...
Flash TWRP, swipe to allow system modifications and then flash the no_verity_opt_encrypt_5.1.zip available from
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
This zip will disable dm-verity and forced encryption in the fstab and allow you to boot normally.
Once this had been done you can flash the root zip of your choice and go to town with debloating, custom ROM's and custom kernels.
Click to expand...
Click to collapse
When i flashed TWRP i unchecked the Auto-Reboot option. did a key combo to get to twrp but it didnt ask me to swipe to allow system modification. So i went ahead and flashed no_verity_opt_encrypt_5.1.zip with success. Proceeded to flash SuperSU-v2.66 and it got stuck at -Creating paths. I rebooted to recovery and found this guide https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Coming from sickmade 6.0.1 and through all the struggles i am now at stock ROOTED firmware EQG3 andriod 7.0! I just had to take my time and search around a bit. You guys are all amazing. Hopefully if someone has this problem they will find this thread.
jleed88 said:
When i flashed TWRP i unchecked the Auto-Reboot option. did a key combo to get to twrp but it didnt ask me to swipe to allow system modification. So i went ahead and flashed no_verity_opt_encrypt_5.1.zip with success. Proceeded to flash SuperSU-v2.66 and it got stuck at -Creating paths. I rebooted to recovery and found this guide https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Coming from sickmade 6.0.1 and through all the struggles i am now at stock ROOTED firmware EQG3 andriod 7.0! I just had to take my time and search around a bit. You guys are all amazing. Hopefully if someone has this problem they will find this thread.
Click to expand...
Click to collapse
Glad it's working for you. Good job. Now you can make your Note 5 your own. I'm an S6 Edge Plus user. We use the exact same ROM as the Note 5. We just use a different kernel. Happy flashing. If you run into any issues don't hesitate to ask me or anyone else here at XDA. This is a great place to read and learn especially with your Note 5. If a problem has occurred before you can bet that someone has posted about it and you will find a solution.
the phone initially booted up normally. and i power off try to enter recovery mode but i got bootloop , is there any way to get into odin mode , recovery mode is broken ( i flashed recovery with odin it took 15 minutes so i click stop and it crashed ) my phone is sm m20