Database Develop

[Q] How to build Galaxian-Soup android from source code for P7300 ?

Hi guys, I want building Galaxian-Soup android from source code for P7300 by myself.
The following is my operation, but I do not know whether the correct?
== Android ==
mkdir -p ~/bin
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
mkdir -p ~/Galaxian-Soup/android
cd ~/Galaxian-Soup/android
repo init -u git://github.com/Galaxian-Soup/android.git
repo sync -j8
== Kernel ==
cd ~/Galaxian-Soup/
git clone git://github.com/Galaxian-Soup/Kernel-GT-P73xx-v2.git Kernel-GT-P73xx-v2.git
cd Kernel-GT-P73xx-v2.git
make motley_p5_3G_ICS_defconfig
make -j4
thanks

It's always got same error
From https://android.googlesource.com/platform/packages/apps/Mms
* [new branch] ics-factoryrom-2-release -> aosp/ics-factoryrom-2-release
* [new branch] ics-mr0 -> aosp/ics-mr0
* [new branch] ics-mr0-release -> aosp/ics-mr0-release
* [new branch] ics-mr1 -> aosp/ics-mr1
* [new branch] ics-mr1-release -> aosp/ics-mr1-release
b5f535e..fea2197 master -> aosp/master
* [new tag] android-2.2.3_r1 -> android-2.2.3_r1
* [new tag] android-2.2.3_r2 -> android-2.2.3_r2
* [new tag] android-4.0.1_r1 -> android-4.0.1_r1
* [new tag] android-4.0.1_r1.1 -> android-4.0.1_r1.1
* [new tag] android-4.0.1_r1.2 -> android-4.0.1_r1.2
* [new tag] android-4.0.2_r1 -> android-4.0.2_r1
* [new tag] android-4.0.3_r1 -> android-4.0.3_r1
* [new tag] android-cts-2.2_r8 -> android-cts-2.2_r8
* [new tag] android-cts-2.3_r10 -> android-cts-2.3_r10
* [new tag] android-cts-2.3_r11 -> android-cts-2.3_r11
* [new tag] android-cts-2.3_r12 -> android-cts-2.3_r12
* [new tag] android-cts-4.0_r1 -> android-cts-4.0_r1
* [new tag] android-cts-verifier-4.0_r1 -> android-cts-verifier-4.0_r1
* [new tag] android-sdk-4.0.3-tools_r1 -> android-sdk-4.0.3-tools_r1
* [new tag] android-sdk-4.0.3_r1 -> android-sdk-4.0.3_r1
* [new tag] android-sdk-adt_r16.0.1 -> android-sdk-adt_r16.0.1
error: RPC failed; result=18, HTTP code = 200MiB | 49 KiB/s
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
warning: http unexpectedly said: '0000'
remote: Counting objects: 28714, done.
remote: Compressing objects: 100% (6602/6602), done.
Receiving objects: 11% (3159/28714), 748.00 KiB | 116 KiB/s
Receiving objects: 15% (4351/28714), 1.21 MiB | 172 KiB/s
error: RPC failed; result=18, HTTP code = 200iB | 14 KiB/s
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
warning: http unexpectedly said: '0000'
error: Cannot fetch Galaxian-Soup/android_packages_apps_Launcher2
error: Exited sync due to fetch errors

=== Building Android ===
source build/envsetup.sh
lunch p5-userdebug
make -j8

=== i686-linux-gcc ===
host C: emulator <= external/qemu/android/main-emulator.c
prebuilts/tools/gcc-sdk/gcc: line 40: prebuilts/tools/gcc-sdk/../../gcc/linux-x86/host/i686-linux-glibc2.7-4.6/bin/i686-linux-gcc: No such file or directory
make: *** [out/host/linux-x86/obj/EXECUTABLES/emulator_intermediates/android/main-emulator.o] Error 127
=== manifest.xml miss prebuilts/gcc ===
[email protected]:/work/android/p7300/android.last/.repo/manifests$ git diff
diff --git a/default.xml b/default.xml
index 263bc9d..4035d06 100644
--- a/default.xml
+++ b/default.xml
@@ -5,7 +5,7 @@
fetch="https://android.googlesource.com/" />
<remote name="github"
- fetch="http://github.com" />
+ fetch="git://github.com" />
<default revision="master"
remote="aosp"
@@ -238,6 +238,8 @@
<project path="packages/wallpapers/NoiseField" name="platform/packages/wallpapers/NoiseField" />
<project path="packages/wallpapers/PhaseBeam" name="platform/packages/wallpapers/PhaseBeam" />
<project path="prebuilt" name="platform/prebuilt" />
+ <project path="prebuilts/gcc/linux-x86/host/i686-linux-glibc2.7-4.6" name="platform/prebuilts/gcc/linux-x86/host/i686-linux-glibc2.7-4.6" />
+ <project path="prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.7-4.6" name="platform/prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.7-4.6" />
<project path="prebuilts/qemu-kernel" name="platform/prebuilts/qemu-kernel" />
<project path="prebuilts/tools" name="platform/prebuilts/tools" />
<project path="sdk" name="platform/sdk" />

problem when build LKM

Here is a loadable kernel module for HTC Sensation XL (runnymede-crc-2.6.35).
/*
* mydebug.c
* System Call sys_open dubugging
*/
#include <linux/kernel.h> /* Needed for KERN_INFO */
#include <linux/module.h> /* Needed by all modules */
#include <linux/init.h> /* Needed for macros */
#include <asm/unistd.h>
#include <linux/linkage.h>
#include <generated/autoconf.h>
#include <linux/in.h>
#include <linux/init_task.h>
#include <linux/ip.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/mm.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/syscalls.h>
#include <linux/tcp.h>
#include <linux/types.h>
#include <linux/version.h>
asmlinkage ssize_t (*orig_open)(const char *pathname, int flags);
asmlinkage ssize_t hooked_open(const char *pathname, int flags)
{
printk(KERN_INFO "SYS_OPEN: %s\n", pathname);
return orig_open(pathname, flags);
}
static int __init root_start(void)
{
unsigned long sys_addr = 0xc003b104; /* System.map */
unsigned long *sys_call_table= (unsigned long *)sys_addr;
orig_open = sys_call_table[__NR_open];
sys_call_table[__NR_open] = hooked_open;
return 0;
}
static void __exit root_stop(void)
{
unsigned long sys_addr = 0xc003b104;
unsigned long *sys_call_table= (unsigned long *)sys_addr;
sys_call_table[__NR_open] = &orig_open;
}
module_init(root_start);
module_exit(root_stop);
-------
When I buid it, the error shows below,
make -C /home/scott/runnymede-crc-2.6.35/ M=`pwd` ARCH=arm CROSS_COMPILE=~/android-ndk-r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi- modules
make[1]: Entering directory `<home>/runnymede-crc-2.6.35'
CC [M] /<home>/workspace/debugkit/mydebug.o
cc1: warnings being treated as errors
/<home>/workspace/debugkit/mydebug.c: In function 'root_start':
/<home>/workspace/debugkit/mydebug.c:44: error: assignment makes pointer from integer without a cast
/<home>/workspace/debugkit/mydebug.c:45: error: assignment makes integer from pointer without a cast
/<home>/workspace/debugkit/mydebug.c: In function 'root_stop':
/<home>/workspace/debugkit/mydebug.c:55: error: assignment makes integer from pointer without a cast
make[2]: *** [/<home>/workspace/debugkit/mydebug.o] Error 1
make[1]: *** [_module_/<home>/workspace/debugkit] Error 2
make[1]: Leaving directory `/home/scott/runnymede-crc-2.6.35'
make: *** [default] Error 2
Anyone can give me a help for it?

2 things...
you should change in the menu : warnings being treated as errors...this will stop building the kernel also if its only a warning
also you can have probs with the toolchain...you can try this:
http://forum.xda-developers.com/showpost.php?p=23367049&postcount=112
with kind regards

[Q] Xperia TL Boosting Wifi Power

Ok back in the day when i had my xperia x10 there was a method to boost the wifi power (tx power) of the device so that the wifi connection could be stronger and range would be better. I have found that typing in the terminal the command iw, will bring lots of options and information. I tried to boost the power but didnt get a result the only thing that did not return an error was turning off the power save for the wifi and setting the txpower to auto. Now i ask is there anyway to boost the wifi tx power from 15dbm to something more?
also the Xperia TL doesnt have a iwconfig command but can be installed by copy pasting the file in the rar down below. you can copy paste it into system/system/bin and system/system/xbin and in the app Wifi txpower thats in the playstore you should get this screen but even if you try and change the settings from there it wont work. also doing this didnt mess up my phone but i advise you make a backup first just in case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Also i found this. Why would they disable frequencies that are supported?
[email protected]:/ $ su
[email protected]:/ # iw phy0 info
Wiphy phy0
Band 1:
Capabilities: 0x9030
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x9072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 5180 MHz [36] (disabled)
* 5200 MHz [40] (disabled)
* 5220 MHz [44] (disabled)
* 5240 MHz [48] (disabled)
* 5260 MHz [52] (disabled)
* 5280 MHz [56] (disabled)
* 5300 MHz [60] (disabled)
* 5320 MHz [64] (disabled)
* 5500 MHz [100] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 9
max scan IEs length: 200 bytes
Coverage class: 0 (up to 0m)
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* set_bss
* join_ibss
* remain_on_channel
* action
* Unknown command (67)
* set_channel
* connect
* disconnect
Supported TX frame types:
* managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
Supported RX frame types:
* managed: 0x0040 0x00d0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* P2P-client: 0x0040 0x00d0
* P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
[email protected]:/ #
Sent from my LT30at using xda app-developers app

After turning off airplane mode i found that more frquencies opened up but some were still disabled.
[email protected]:/ $ iw phy0 info
Wiphy phy0
Band 1:
Capabilities: 0x9030
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x9072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (20.0 dBm) (radar detection)
* 5520 MHz [104] (20.0 dBm) (radar detection)
* 5540 MHz [108] (20.0 dBm) (radar detection)
* 5560 MHz [112] (20.0 dBm) (radar detection)
* 5580 MHz [116] (20.0 dBm) (radar detection)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (20.0 dBm) (radar detection)
* 5680 MHz [136] (20.0 dBm) (radar detection)
* 5700 MHz [140] (20.0 dBm) (radar detection)
* 5745 MHz [149] (30.0 dBm)
* 5765 MHz [153] (30.0 dBm)
* 5785 MHz [157] (30.0 dBm)
* 5805 MHz [161] (30.0 dBm)
* 5825 MHz [165] (30.0 dBm)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 9
max scan IEs length: 200 bytes
Coverage class: 0 (up to 0m)
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* set_bss
* join_ibss
* remain_on_channel
* action
* Unknown command (67)
* set_channel
* connect
* disconnect
Supported TX frame types:
* managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
Supported RX frame types:
* managed: 0x0040 0x00d0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* P2P-client: 0x0040 0x00d0
* P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
[email protected]:/ $
Sent from my LT30at using xda app-developers app

And this is when i had full signal bars
[email protected]:/ $ iw phy0 info
Wiphy phy0
Band 1:
Capabilities: 0x9030
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
* 2484 MHz [14] (disabled)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x9072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
L-SIG TXOP protection
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (20.0 dBm) (radar detection)
* 5520 MHz [104] (20.0 dBm) (radar detection)
* 5540 MHz [108] (20.0 dBm) (radar detection)
* 5560 MHz [112] (20.0 dBm) (radar detection)
* 5580 MHz [116] (20.0 dBm) (radar detection)
* 5600 MHz [120] (27.0 dBm) (radar detection)
* 5620 MHz [124] (27.0 dBm) (radar detection)
* 5640 MHz [128] (27.0 dBm) (radar detection)
* 5660 MHz [132] (20.0 dBm) (radar detection)
* 5680 MHz [136] (20.0 dBm) (radar detection)
* 5700 MHz [140] (20.0 dBm) (radar detection)
* 5745 MHz [149] (disabled)
* 5765 MHz [153] (disabled)
* 5785 MHz [157] (disabled)
* 5805 MHz [161] (disabled)
* 5825 MHz [165] (disabled)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 9
max scan IEs length: 200 bytes
Coverage class: 0 (up to 0m)
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* set_bss
* join_ibss
* remain_on_channel
* action
* Unknown command (67)
* set_channel
* connect
* disconnect
Supported TX frame types:
* managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
Supported RX frame types:
* managed: 0x0040 0x00d0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* P2P-client: 0x0040 0x00d0
* P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
[email protected]:/ $
Sent from my LT30at using xda app-developers app

So nothing of this makes sense to anybody?
Sent from my LT30at using xda app-developers app

Can a mod move this thread to general? I think it would garner more attention there. Thanks
Sent from my LT30at using xda app-developers app

No need to move I think (I am not a mod) because you are asking a question.
You could maybe drop a PM to @DooMLoRD with a link to this thread and ask him to have a look at it.

Well i sent him a pm lets see what happens ^^
Sent from my LT30at using xda app-developers app

[Q] Kernel LED Brightness - mA Table

I am struggling a bit with the LED brightness.
in
Code:
drivers/leds/leds-bd2802.c
i have the following code
Code:
#define BD2802_CURRENT_WHITE_PEAK 0x5 /* 18mA */
#define BD2802_CURRENT_WHITE_MAX 0x01c /* 5.6mA */
#define BD2802_CURRENT_BLUE_MAX 0x01c /* 5.6mA */
#define BD2802_CURRENT_WHITE_MIN 0x03 /* 0.6mA */
#define BD2802_CURRENT_BLUE_MIN 0x03 /* 0.6mA */
#define BD2802_CURRENT_000 0x00 /* 0.0mA */
What i would like to know, how do i know, which hex value equals which mA value?
i tried googling but didnt find anything.
is there any chart / table to calculate between the hex and mA value?
Thank you

[CLOSED] - [ROM][13][lime] PixelExperience [AOSP]

​​
[TD][/TD]​
[TR]
[TD][/TD]
[TD]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]PixelExperience for Xiaomi Redmi 9T/NFC/9 Power[lime][/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]What is this?[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Based on Android 13[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Whats working?[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Wi-Fi[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]RIL[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Mobile data[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]GPS[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Camera[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Flashlight[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Camcorder[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Bluetooth[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]FM radio[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Fingerprint reader[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Face unlock[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]NFC[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Lights[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Sound/vibration[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Known issues[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Nothing yet[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]You tell me[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Download from PixelExperience website[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Donate[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Liked my work? Give me a beer[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Translation[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Help with project translation[/TD]
[/TR]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Stay tuned[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Our Telegram channel[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]Our blog[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]​
[/TD]
[/TR]
​
[TR]
[TD][/TD]
[TD]
Android OS version: 13[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]
Security patch level: February 2022[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]
Build author/Device Maintainer: [/TD]
[/TR]
[TR]
[TD][/TD]
[TD][*]Device Source code: [url=https://github.com/PixelExperience-Devices]https://github.com/PixelExperience-Devices[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]
Source code: https://github.com/PixelExperience[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]
ROM Developer: jhenrique09[/TD]
[/TR]
[TR]
[TD][/TD]
[TD]
​
[/TD]
[/TR]

Is it only me or the post is poor formated ?

lidgl4991 said:
Is it only me or the post is poor formated ?
Click to expand...
Click to collapse
I see LOTS of table formatting info...could the OP take a look at this?

debianmain1 said:
I see LOTS of table formatting info...could the OP take a look at this?
Click to expand...
Click to collapse
Dunno, it will be hilarious if the OP turns out just copying post without set the writing format.

Can you please revise the first Post. Nobody can Figure that out!!!

The download link is here:
Xiaomi Redmi 9T / Redmi 9T NFC / Redmi 9 Power (lime) - PixelExperience
Xiaomi Redmi 9T / Redmi 9T NFC / Redmi 9 Power (lime) - PixelExperience
get.pixelexperience.org
Tried someone this rom on redmi 9t ?

MODERATION INFO
Thread closed. The OP did not respond to the request to complete its thread.​