hello so today I tried to flash twrp but I got a message saying this system has been destroyed, I would really like help on how I can restore it and I dont have any recovery, it automatically boots to fastboot and i cant do anything
also edit: I cant boot into recovery because everytime I try to do fastboot boot twrp.img it says this system has been destroyed and tells me to shutdown
deja_blue said:
hello so today I tried to flash twrp but I got a message saying this system has been destroyed, I would really like help on how I can restore it and I dont have any recovery, it automatically boots to fastboot and i cant do anything
also edit: I cant boot into recovery because everytime I try to do fastboot boot twrp.img it says this system has been destroyed and tells me to shutdown
Click to expand...
Click to collapse
Did you unlock bootloader?
Did you flash patched vbmeta?
VD171 said:
Did you unlock bootloader?
Did you flash patched vbmeta?
Click to expand...
Click to collapse
Yes, I unlocked the bootloader
But I dont think I flashed a patched vbmeta
[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
PATCHED VBMETA.IMG for MERLIN by VD171 For what do I need it ? If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once...
forum.xda-developers.com
VD171 said:
[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
PATCHED VBMETA.IMG for MERLIN by VD171 For what do I need it ? If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once...
forum.xda-developers.com
Click to expand...
Click to collapse
gives me this: FAILED (remote: 'Error flashing partition : Volume Full')
deja_blue said:
gives me this: FAILED (remote: 'Error flashing partition : Volume Full')
Click to expand...
Click to collapse
How did you flash it?
May attach the screenshot, please?
VD171 said:
How did you flash it?
May attach the screenshot, please?
Click to expand...
Click to collapse
I never saw this error before.
Try using spflashtool.
VD171 said:
I never saw this error before.
Try using spflashtool.
Click to expand...
Click to collapse
I was trying random files until one worked
deja_blue said:
I was trying random files until one worked
Click to expand...
Click to collapse
You can use any patched vbmeta.
It will works perfectly to any version.
VD171 said:
You can use any patched vbmeta.
It will works perfectly to any version.
Click to expand...
Click to collapse
some gave me the partition full error
anyway what do I do now
Quick update: I think I managed to flash the stock ROM and atleast get the phone working again
deja_blue said:
some gave me the partition full error
anyway what do I do now
Click to expand...
Click to collapse
You can keep any patched vbmeta of any version.
If V12.5.1.0 has ben flashed, you can keep it.
VD171 said:
You can keep any patched vbmeta of any version.
If V12.5.1.0 has ben flashed, you can keep it.
Click to expand...
Click to collapse
gonna try again tomorrow but thanks for the help
also another quick update: before flashing the stock ROM I flashed the patched vbmeta but it still wouldnt quite let me flash TWRP
deja_blue said:
also another quick update: before flashing the stock ROM I flashed the patched vbmeta but it still wouldnt quite let me flash TWRP
Click to expand...
Click to collapse
Some TWRP are not working on some versions.
I suggest you to try all versions, if you can.
Flashing recovery does not brick your device, you can flash another easily and safely.
I suggest you to flash recovery using fastboot.
Certainly, more than one will works to you.
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
VD171 said:
Some TWRP are not working on some versions.
I suggest you to try all versions, if you can.
Flashing recovery does not brick your device, you can flash another easily and safely.
I suggest you to flash recovery using fastboot.
Certainly, more than one will works to you.
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
Click to expand...
Click to collapse
I realized my firmware version is RJZEUXM, would any of the vbmeta images work?
deja_blue said:
I realized my firmware version is RJZEUXM, would any of the vbmeta images work?
Click to expand...
Click to collapse
You can use ANY patched vbmeta securely and safely, my friend.
Just trust me
VD171 said:
You can use ANY patched vbmeta securely and safely, my friend.
Just trust me
Click to expand...
Click to collapse
ok so thats a no, everytime I flash a custom vbmeta my phone just goes in a bootloop to MIUI recovery
P.S 4th time having to flash stock ROM, getting kinda annoying
deja_blue said:
ok so thats a no, everytime I flash a custom vbmeta my phone just goes in a bootloop to MIUI recovery
P.S 4th time having to flash stock ROM, getting kinda annoying
Click to expand...
Click to collapse
I said any version of any PATCHED vbmeta.
Obviously, you need unlocked bootloader too.
Related
Hi,
I'm on MIUI Global 12.0.4.0 (QCREUXM) rom, and my bootloader is unlocked with official Xiaomi tool.
I tried to root my Redmi 9c by modifying the boot.img file with magisk, and flashing it via adb.
It resulted in bootloop. So I reset back to the original boot.img, and I'm still rootless...
Does anyone know how to root this phone ?
There is no TWRP for it right now.
Thanks for any help.
BTW, is it normal that modified boot.img is much lighter than original file ? (11Mo vs 65Mo)
batteurfou said:
Hi,
I'm on MIUI Global 12.0.4.0 (QCREUXM) rom, and my bootloader is unlocked with official Xiaomi tool.
I tried to root my Redmi 9c by modifying the boot.img file with magisk, and flashing it via adb.
It resulted in bootloop. So I reset back to the original boot.img, and I'm still rootless...
Does anyone know how to root this phone ?
There is no TWRP for it right now.
Thanks for any help.
BTW, is it normal that modified boot.img is much lighter than original file ? (11Mo vs 65Mo)
Click to expand...
Click to collapse
I am facing the same result, probably the reason is that the device is SAR - System-As-Root, therefore patching boot.img aint giving root previliges and flashing causing bootloops.
Moreover modiying the system.img and flashing it wont give you root ethier.
You can try modfying and flashing the recovery.img while wiping your data as dsecribed in magisk site but every time you reboot, you need to apply the same combo buttons to enable the magisk root.
All we can do for now is to wait for a custom recovery that will probaly never be arrived or im wrong.
BTW: the patched img is supposed to be small as what ive researched, magisk repacker is repacking and compiling it to a smaller img.
Flash pachedboot.img then vbmeta 256 bites file
Redmi 9c not rooting via magsik patched boot img
Same issue
same here ,
my xiaomi 9c BL are unlock with xiaomi unlock tools
after i patch my boot.img with magisk the patchboot.img become smaller like 10kb only
after i fastboot and flash it bootloop every time
im sure my patchboot.img have some problem
but no idea how to fix it
is there anyone get this kind of problem , and how you fix it
please share your Thought thank you
powershell wont run the .\fastboot flash boot magisk_patched.img command. it gets stuck in waiting for devices even when the device is plugged and already on fastboot mode. any ideas how to fix this?
rtanjunyu said:
same here ,
my xiaomi 9c BL are unlock with xiaomi unlock tools
after i patch my boot.img with magisk the patchboot.img become smaller like 10kb only
after i fastboot and flash it bootloop every time
im sure my patchboot.img have some problem
but no idea how to fix it
is there anyone get this kind of problem , and how you fix it
please share your Thought thank you[/QUOTE
Hi, how were u able to unlock the 9c? I tried to unlock using the mi unlock tool but the message appears Couldn't Unlock then some Chinese words beneath it (can shu gong chang). How to solve this? Thank you
Click to expand...
Click to collapse
Guys check out my thread on how to root it!!! Credits to Surendra R sonawane for it:
How to ROOT Xiaomi Redmi 9C [FUNCTIONAL]
Ok so i found out that you cant root this phone without flashing vbmeta.img So its pretty simple to root your phone, here are the steps: 1. Patch your boot.img with magisk 2. download vbmeta.img and put it into your adb folder (do the same with...
forum.xda-developers.com
batteurfou said:
Hi,
I'm on MIUI Global 12.0.4.0 (QCREUXM) rom, and my bootloader is unlocked with official Xiaomi tool.
I tried to root my Redmi 9c by modifying the boot.img file with magisk, and flashing it via adb.
It resulted in bootloop. So I reset back to the original boot.img, and I'm still rootless...
Does anyone know how to root this phone ?
There is no TWRP for it right now.
Thanks for any help.
BTW, is it normal that modified boot.img is much lighter than original file ? (11Mo vs 65Mo)
Click to expand...
Click to collapse
After flashing boot.img file flash vbmeta.img file it will prevent it from bootloop just Google vbmeta.img download it and flash it through adb tools after flashing magisk modified boot.img file
To flash it in adb type flash vbmeta vbmeta.img
I have successfully rooted my redmi 9C with this method and no bootloop issue
batteurfou said:
Hi,
I'm on MIUI Global 12.0.4.0 (QCREUXM) rom, and my bootloader is unlocked with official Xiaomi tool.
I tried to root my Redmi 9c by modifying the boot.img file with magisk, and flashing it via adb.
It resulted in bootloop. So I reset back to the original boot.img, and I'm still rootless...
Does anyone know how to root this phone ?
There is no TWRP for it right now.
Thanks for any help.
BTW, is it normal that modified boot.img is much lighter than original file ? (11Mo vs 65Mo)
Click to expand...
Click to collapse
First download official stock rom from here:
Xiaomi MiUI Fastboot ROM download link for all Mi phones
Here you can find download link to MiUI stable fastboot ROM for Indian, global & other Mi variants. Mi fastboot firmware download India
miservicecentre.com
Then install latest version of magisk manager patch boot.img
Then flash it with adb.
Most important!
After flashing patched_boot.img flash vbmeta by typing "fastboot flash vbmeta vbmeta.img
Download it from from here:
vbmeta
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Then reboot and enjoy root!
See this post: https://forum.xda-developers.com/t/guide-how-to-root-redmi-9c-tested.4251085/
I have a redmi note 9 on miui 12.0.10.0.QJOEUXM and i want to root it. Do you guys know how to do it ?
Thanks..
Same as any other miui version.
Flashing the magisk patched boot.img.
VD171 said:
Same as any other miui version.
Flashing the magisk patched boot.img.
Click to expand...
Click to collapse
Yes but where i can find this magisk patched boot.img?
You can patch that manually, using the magisk app.
Just extract the boot.img from the stock miui and then patch it using the magisk app.
VD171 said:
You can patch that manually, using the magisk app.
Just extract the boot.img from the stock miui and then patch it using the magisk app.
Click to expand...
Click to collapse
Ooo thanks youu
I also want to root my Note 9(QJOEUXM at 12.0.10.0). But I've read contradicting information here in the forum regarding the approach. E.g. the VBMETA.IMG. Do I need the patched version or do I have to flash the originals with the command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?
I'm a little cautious because I already wrecked the Note 9 with the original xiaomi flash tool when trying to downgrade.
Or can I easy use the XiaoMiTool V2?
Meik2 said:
I also want to root my Note 9(QJOEUXM at 12.0.10.0). But I've read contradicting information here in the forum regarding the approach. E.g. the VBMETA.IMG. Do I need the patched version or do I have to flash the originals with the command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?
I'm a little cautious because I already wrecked the Note 9 with the original xiaomi flash tool when trying to downgrade.
Click to expand...
Click to collapse
The patched vbmeta and the stock vbmeta flashed with "disable-verity and disable-verification" are exactly same.
Any patched vbmeta from any miui version will works perfectly.
OK. Here you wrote that the RECOVERY.IMG is needed. But this File is not part of the stock Fastboot Image. Do i need the recovery.img or just
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
and the Device has root.
As far as I understand, I still have to flash the recovery to get the TWRP recovery.
Meik2 said:
OK. Here you wrote that the RECOVERY.IMG is needed. But this File is not part of the stock Fastboot Image. Do i need the recovery.img or just
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
and the Device has root.
As far as I understand, I still have to flash the recovery to get the TWRP recovery.
Click to expand...
Click to collapse
Recovery.img is not needed.
You can avoid recovery safely.
If you want to have the original recovery, just flash the stock recovery.img.
If you want to have twrp, just flash the twrp recovery.img.
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
OK. The i will start rooting my device now. Where can I get the TWRP-recovery.img and the stock recovery for 12.0.10.0? How i said, the recovery.img is not part of the official stock zip File
Will SPFlash Tool still work with this Android Version? Then I could do a backup for the recovery Partition. BTW. Root was successfull. Thanks for your support.
Meik2 said:
OK. The i will start rooting my device now. Where can I get the TWRP-recovery.img and the stock recovery for 12.0.10.0? How i said, the recovery.img is not part of the official stock zip File
Click to expand...
Click to collapse
TWRP for V12.0.6.0 will works perfectly.
The zip file is the recovery mode rom.
The tgz file is the fastboot mode rom.
The zip file doesn't come with the recovery.img file.
The tgz file comes with the recovery.img file.
Here, you can find many TWRP versions:
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
Here, you can find the stock recovery.img file:
[IMG][STOCK][PATCHED] Boot, Vbmeta and Recovery: Images Partitions for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
Original Stock BOOT.IMG for MERLIN + Magisk Patched BOOT.IMG for MERLIN + Original Stock VBMETA.IMG for MERLIN + Original Stock RECOVERY.IMG for MERLIN Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Firmware Versions: - (Engineering)...
forum.xda-developers.com
Meik2 said:
Will SPFlash Tool still work with this Android Version? Then I could do a backup for the recovery Partition. BTW. Root was successfull. Thanks for your support.
Click to expand...
Click to collapse
Yes, but you need to bypass the EDL authentication.
Or, you can just enter in fastboot and flash the preloader of V12.0.4.0 and you will can skip bypass the EDL authentication.
Perfect. That's all i wanted to know. -- Nearly all. What happens if my Note 9 starts an OTA Update? I've seen there is one available few minutes ago. 12.0.1.0 RJOEUXM
Meik2 said:
Perfect. That's all i wanted to know. -- Nearly all. What happens if my Note 9 starts an OTA Update? I've seen there is one available few minutes ago. 12.0.1.0 RJOEUXM
Click to expand...
Click to collapse
If you root the device and flash it using OTA Update, probably the device will got a bootloop.
You can flash updates using fastboot safely and securely.
Just use the "flash_except_data" file.
OK. Thanks for this great support.
best regards
Meik2 said:
OK. Thanks for this great support.
best regards
Click to expand...
Click to collapse
You are welcome, my friend.
Enjoy.
Regards
Hi
I search good Custom Rom for my S20 Fe ( SM-G780F/DS ) and a how to flash it on my phone
My phone is actual all Stock
thanks a lot
there are no custom roms yet for you, there are GSIs though!
Ok thanks !
What is the different between gsi and Custom rom ?
And wehre i can fiind gsi for my Phone?
Thanks a lot
Luigello said:
Ok thanks !
What is the different between gsi and Custom rom ?
And wehre i can fiind gsi for my Phone?
Thanks a lot
Click to expand...
Click to collapse
a GSI is a generic system image, i.e. a rom that runs on all project treble capable phones.
that makes it sound easier to than it is. join the group here for more help http://t.me/S20FeModding 5G and 4G snapdragon users are welcome too.
i got his problem now:
Odin Mode( SVB Fail )
recovery: No footer detected
recovery: Error verifying vbmeta image: invalid vbmeta heater (6)
Custom recovery
what i can do ?
Luigello said:
i got his problem now:
Odin Mode( SVB Fail )
recovery: No footer detected
recovery: Error verifying vbmeta image: invalid vbmeta heater (6)
Custom recovery
what i can do ?
Click to expand...
Click to collapse
what were you doing and what state is your phone in ? rooted, custom recovery ?
I have reflash Stock firmware!
I cant Flash vbmeta it will fail i can only Flash twrp and i cant enter in recovery from twrp
Luigello said:
I have reflash Stock firmware!
I cant Flash vbmeta it will fail i can only Flash twrp and i cant enter in recovery from twrp
Click to expand...
Click to collapse
have you rooted the firmware since this post ? on telegram you mentioned being rooted.
you can't flash anything other than official fw or images until vbmeta has been flashed. if you are rooted now then check telegram for the reply there. if you're NOT rooted you'll probably need to flash stock to flash stock recovery back and start again.
vbmeta doesn't flash every time for a few people, me included. rooting by patching the AP archive can be a workaround for that problem. again see telegram reply for more details of what to do after that.
I will restart again
i have now copy the gsi on my phone.
i want to install it now but after i selected install img
i dont have system
i have only:
Boot
Recovery
optics image
Prism image
Super (System,Vendor,Product,Odm )
which one i must select ?
thanks
As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!
the device does not have official TWRP, the others available on telegram group do work fine
Thank you, but what telegram group? Could you forward me a link to it or something?
GeoS__ said:
Thank you, but what telegram group? Could you forward me a link to it or something?
Click to expand...
Click to collapse
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
SubwayChamp said:
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance
GeoS__ said:
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance
Click to expand...
Click to collapse
spes and spesn are the same device. the "n" in spesn stands for NFC support
MarvavCZE said:
spes and spesn are the same device. the "n" in spesn stands for NFC support
Click to expand...
Click to collapse
Oh really? Can i flash it then? I really do not care much for NFC.
GeoS__ said:
Oh really? Can i flash it then? I really do not care much for NFC.
Click to expand...
Click to collapse
Of course, you can, in recovery builds these differences don't matter.
just rooted with FASTBOOT and latest Magisk.App
How to Root Xiaomi MIUI 13 based on Android 12 via Magisk
In this guide, we will show you the detailed steps to root your Xiaomi device running MIUI 13 based on Android 12 via Magisk.
www.droidwin.com
Installation
The Magic Mask for Android
topjohnwu.github.io
Current installed MiUi version needs to match the complete Recovery Image you have to download
in my case:
https://bigota.d.miui.com/V13.0.11.0.RGKEUXM/spesn_eea_global_images_V13.0.11.0.RGKEUXM_20220606.0000.00_11.0_eea_5c36ea339b.tgz
or
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Extracting the Boot.Img - let magic app patch it on your fone copy back to Computer and install it like described on "droidwin":
fastboot flash boot magisk_patched-25100_0UGhl.img
have fun
linolino
GeoS__ said:
As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!
Click to expand...
Click to collapse
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )
I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp
GeoS__ said:
I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp
Click to expand...
Click to collapse
so, you flashed TWRP recovery, by booting the TWRP from your PC ?
OK... I can try that.
exactly. i connected with adb and checked with adb devices, then pushed the twrp image to the phone and booted off of it through fastboot. if it works booting off of the img it's pretty safe to flash
To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.
Microsheepcl said:
To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.
Click to expand...
Click to collapse
exactly! twrp even offers a checkbox to automatically reflash itself after the rom when flashing
interesting, it seems to work a little bit different than what I did before! thx for sharing your knowledge
metaxda said:
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )
Click to expand...
Click to collapse
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device), The one that worked on me was a unnoficial Ofox
UltimaDea said:
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device)
Click to expand...
Click to collapse
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
3.6.1 only works for MIUI A11 ROMs
3.6.2 only works for AOSP and A12 MIUI (but no for MIUI ROM flashing)
3.7.0 fully works for any ROM except A11
gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
Both the TWRP 3.6.2-12.1 and TWRP 3.7.0_12-0-spes works on my phone (SPES Global)
I am on android 12 version of MIUI 13. In fact I used the TWRP 3.7 to flash MIUI13.EU 13.0.5 A12 ROM and it works.
The two versions above can decrypt my phone without any problem. MTP also works in recovery mode.
Your phone is using Android 11. Probably that's the reason the TWRP versions I've mentioned above does not work for you.
I tend to agree with NeoSDAP.
Hello dear forum
Just got a huge problem, after installing twrp, i wanted to update from Miui13 to Miui14.
it chopped everything up a bit. But then finally done with a message, see attachment.
Since then I can no longer do a normal restart, the phone just hangs in fastboot mode.
Tested a fastboot boot twrp.img, no success.
Does anyone have advice for me?
Which TWRP(full name)?
this one
twrp-3.7.0_11-0-star.img
i test now a recovery flash with Mi Flash Pro, i thing is the one solution.
Are you sure of the version of your device, Star and not Venus?
Anyway you used a TWRP A11 while the system is A12.
try flashing the correct TWRP A12 again.
star/
Recovery for Xiaomi devices - Browse /star at SourceForge.net
List of relevant recovery in one place
sourceforge.net
venus/
Recovery for Xiaomi devices - Browse /venus at SourceForge.net
List of relevant recovery in one place
sourceforge.net
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP
If the TWRP flash works:
TWRP/wipe format data type yes reboot TWRP.
Sideload or use OTG for flashing the rom.
If nothing works use Miflash.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
bjnass said:
i test now a recovery flash with Mi Flash Pro, i thing is the one solution.
Click to expand...
Click to collapse
Not a official tool.
that should be official
only works if you log in with the Xiamoi account.
But pimps with all Roms
by the Mi 11 Ultra write -> star
bjnass said:
that should be official
only works if you log in with the Xiamoi account.
But pimps with all Roms
Click to expand...
Click to collapse
Miflash does not require Xiaomi account only MiUnlock.
But it was like that, maybe the Pro version.
now currently I come to the Chinese Recovery 5.0
What is the best thing for me to do?
bjnass said:
by the Mi 11 Ultra write -> star
Click to expand...
Click to collapse
Useful details :Mi 11 venus/Mi 11 ultra Star.
bjnass said:
But it was like that, maybe the Pro version.
now currently I come to the Chinese Recovery 5.0
What is the best thing for me to do?
Click to expand...
Click to collapse
If that didn't work use Mi Flash (dont relock the bootloader).
Phone starts only in Fastboot
Hello dear forum Just got a huge problem, after installing twrp, i wanted to update from Miui13 to Miui14. it chopped everything up a bit. But then finally done with a message, see attachment. Since then I can no longer do a normal restart...
forum.xda-developers.com
now the phone has reset itself
So install everything again from the beginning, hope it works directly with Miui 14.
Which twrp should I take A12 Or A13?
bjnass said:
now the phone has reset itself
So install everything again from the beginning, hope it works directly with Miui 14.
Which twrp should I take A12 Or A13?
Click to expand...
Click to collapse
If the system is A12 Miui 13, TWRP A12.
If the system is A13 Miui 14,TWRP A13.
Why didn't you flash MIUI 14 with Miflash?
Yes i test it but dont work.
when i take the xiaomi.eu_multi_MI11Pro_MI11Ultra_V14.0.6.0.TKACNXM_v14-13 rom mi Flash say
-> couldn't find flash script.
and on the server dont have more Miui14 Rom with fastboot script include
bjnass said:
Yes i test it but dont work.
when i take the xiaomi.eu_multi_MI11Pro_MI11Ultra_V14.0.6.0.TKACNXM_v14-13 rom mi Flash say
-> couldn't find flash script.
and on the server dont have more Miui14 Rom with fastboot script include
Click to expand...
Click to collapse
TGZ files not ZIP.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Package Name: star_global_images_V14.0.1.0.TKAMIXM_20230210.0000.00_13.0_global_3abbe1c73e.tgz
Version CN
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
This is the gobal image ??
i like the EU Rom
bjnass said:
This is the gobal image ??
Click to expand...
Click to collapse
Yep, and below the CN version.
bjnass said:
i like the EU Rom
Click to expand...
Click to collapse
Xiaomi EU rom is a custom rom not a stock.