Database Develop

mi5 brick after edl flash. start only fastboot. locked bootloader

hi,
i flashed 6.5.12 by miflash in edl mode.
Flash done in miflash, but on reboot mi5 is bricked. Logo Mi and shut down.
bootloader is locked.
my devices start only fastboot mode. it don't go in edl mode. if i press powe and vol + it's don't start and shut down.
By fastboot it's don't go in edl
help me pleas

If your are logged into your Mi Account on the phone you can do this: apply for the bootloader unlock code with that MI account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english

Ehi, I know how to fix your phone.
I can link you an italian forum's thread, a guy had your same problem. You have to plug your phone to pc and press power button and vol+ button, your pc will recognize it correctly if you had installed drivers, even if your phone shuts down. Now you can enter in edl mode (maybe mi5 is already in it) and flash a rom with miflash.
Sorry for my English.

Have you try to flash using MiFlash?
You can download it from here
My friend also encounter this problem and what he did is:
1. Use a fresh installed notebook with Win 7
2. Use MiFlash to flash the image file.
Image file can be downloaded from here.
It should works with locked bootloader as you are flashing the stock image.
Please give it a try.

littleprince86 said:
By fastboot it's don't go in edl
Click to expand...
Click to collapse
Please try this method.

I had the same issue after I had relocked bootloader using command
fastboot oem lock
Click to expand...
Click to collapse
When I noticed this strange behaviour, I switched to fastboot mode again (VolDown + Power) and unlocked bootloader again using MiUnlock tool for Windows and USB data cable. After that it my phone works again. No data was lost - everything remained as before.

Xiaomi Mi5 Bootloop, no recovery mode, no edl mode, only fastboot

Hello everyone ... I have a xiaomi mi5 in bootloop.
- Initial ROM fake seller (learned later)
- I tried to update with MiPcSuite and is now in bootloop.
- I DO NOT unlocked bootloader
- I did NOT access Xiaomi account on mi5 (so I can not unlock it now even if I have permission from Xiomi)
- First of all, I activated the "developer mode" and "USB debugging".
- I can only enter Fastboot mode
-I Can not use the recovery mode
- I can not get into EDL in any way: no adb, no tool here (with the tool says restarting EDL success but restarts and reappears MIUI logo, does not turn on the red light and nothing appears in the device manager)
Thank you

Try to wipe system and install
1. Go to fast boot.
2. Wipe all partitions
Code:
> fastboot erase boot
> fastboot erase recovery
> fastboot erase system -w
flash fresh fastboot image from Mi
Code:
>fastboot flash system <image name>

It works? It has already been tested? I could not find any other guide that told you to do this ... I will not say that I do not trust this, but I want to do other s-h-i-t! I remember that I have the bootloader locked, and I can not go to EDL mode ... thank's

Not sure you are allowed to run the flash command when you're on locked bootloader. I'd try it without erasing, since flashing overwrites the partition in question anyway.

I have experience like you... Get bootloop.
But when I wipe/erase all of internal memory through Mi PCSuite China version, it's boot normally and MiUI8 started.
I tried the same method to apply the official china stable rom on my friend Mi5, it's bootloop... Then when I wipe all, it's boot normally.
Hope this will help you...

vmancer said:
I have experience like you... Get bootloop.
But when I wipe/erase all of internal memory through Mi PCSuite China version, it's boot normally and MiUI8 started.
I tried the same method to apply the official china stable rom on my friend Mi5, it's bootloop... Then when I wipe all, it's boot normally.
Hope this will help you...
Click to expand...
Click to collapse
how do you wipe using mi pcsuite? which button did you used?

Limerade said:
how do you wipe using mi pcsuite? which button did you used?
Click to expand...
Click to collapse
I think 3rd button..
You can get help from Google translate app.
Take photo from Google Translate then translate to your language.

Use the Chinese mi pcsuite if the English one doesn't recognize the phone. I am not sure if you cannot enter in any form of recovery you have luck with that though.
Fastboot and miflash that was suggested will not work with locked bootloader.
Your best and last bet is to use EDL mode. The issue with Mi5 is that it doesn't go easily in EDL mode. not with key combo at least. Have you tried this? https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292. Otherwise, check for deep flash cable or make one yourself.

in lineage's Usermanual it says after a few steps:
Hold Volume Up and Power buttons simultaneously. Continue to hold both buttons until the “MI” logo appears on the screen, then release.
I get only fastboot-image nothing else.
i did the following comands:
> fastboot erase boot
> fastboot erase recovery
> fastboot erase system -w
>fastboot flash recovery recovery twrp-3.1.1-0-gemini.img
Both Power and + or Power and - : Same result: Fastboot.
I had unlocked the phone and usb-debugging was enabled.
I do use Linux by the way

Hey, did you solve it? I have same problem and I'm desperate

No I didn't solve the problem. I realized that I completely was wrong. I had an Xiaomi Mi 5c in stead of Xiaomi Mi 5.
I finally was able to flash it because I choses the wrong Recovery and Rom.
Then I sold it and bought a Xiaomi Mi 5 which I wanted because it is supported by lineageos...
?

whatadan said:
No I didn't solve the problem. I realized that I completely was wrong. I had an Xiaomi Mi 5c in stead of Xiaomi Mi 5.
I finally was able to flash it because I choses the wrong Recovery and Rom.
Then I sold it and bought a Xiaomi Mi 5 which I wanted because it is supported by lineageos...
?
Click to expand...
Click to collapse
Hahahah what a story man, I fear I didn't choose the wrong Rom and I have a good brick :') Lineageos is just amazing, have fun!

.....And anyway, in the end I had solved it with a home-made EDL cable 3 years ago ???...and my Mi5 is still alive in my hands 3 years after ?
I had forgotten this thread
I hope you can now sleep well again at night now that you know that everything went well ?
Goodbye

Redmi 4 (Santoni) bricked. Please help.

I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....

can you access the twrp?

foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.

Somebody please help...

unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:

PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.

jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.

jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?

I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.

jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked

Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...

PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.

PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.

For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..

Redmi Note 9 merlin 4/128 NFC - Hard Brick

A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?

Already tried power and minus option.when you connect to a desktop what does it say ?

Dokrak99 said:
Already tried power and minus option.when you connect to a desktop what does it say ?
Click to expand...
Click to collapse
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.

That's bad.
Hold the power +/- longer then 15 seconds try both.
Second
Charge for about 10 minutes and try the same again.
Last drain it when down keep pushing the power button to flat it.hook it up on desktop and install miflashtools.or try power +/- again

Dokrak99 said:
Hold the power +/- longer then 15 seconds try both.
Click to expand...
Click to collapse
Same as:
LordRedstone05 said:
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.
Click to expand...
Click to collapse
Dokrak99 said:
Charge for about 10 minutes and try the same again.
Click to expand...
Click to collapse
When I try to charge it it goes in the bootloop again until I disconnect it and the battery runs out.
Dokrak99 said:
Last drain it when down keep pushing the power button to flat it.
Click to expand...
Click to collapse
It goes on, shows this battery icon, that it's empty and goes off. This repeats until I release the button.
Dokrak99 said:
hook it up on desktop and install miflashtools.or try power +/- again
Click to expand...
Click to collapse
The miflashtool does nothing when I click on Flash with the images and scripts loaded. Power +/- does the same as before.

Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot

Dokrak99 said:
Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot
Click to expand...
Click to collapse
Thanks in advance

What should I do in this tool? The tool doesn't recognize my phone. It brings nothing since I cannot access Fastboot.

Well basically there is only one real option left . contact mi service center because mi don't support or they closed there download,edl support on there phones to prevent rom swapping .there is a edl cable with mtk support around but that's a long shot.because I never had a messed up phone like this.at least not one with mtk.without recognise you're desktop I don't see a fix in this to get in fastboot or flash it.

Download platform tools drop it on c:/ so c:/platform tools .install abd drivers package if you didn't have it.go in platform tools the top line and tick Cmd hit enter.try command : fastboot devices .try a few times if a number pops up you can try .fastboot reboot fastboot

LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
TWRP bricked my redmi Note 9 too, but i had ADB Connection in the black Screen so i rebooted to Fastboot over ADB and reflashed the Stock rom

LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
Did you find solution on this? Please answer bro i need your help

Jayson Galang said:
Did you find solution on this? Please answer bro i need your help
Click to expand...
Click to collapse
Unfortunately i haven't found a solution. I had to send it to a service center 2 Days ago. Sorry, that i couldn't help.

the right driver is mtk this is not adb nothing happens the this you could fixs is
go to the nearest techniciann beacause they need special tools to fix properly

Is your phone still bricked, If yes, I can provide link for the factory firmware recently released for Merlin, You could give flashing that in SP Flash a try, does not need auth account.

If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Communos said:
Is your phone still bricked, If yes, I can provide link for the factory firmware recently leaked for Merlin, You could give flashing that in SP Flash a try, does not need auth account.
Click to expand...
Click to collapse
yow is that legit? Had my redmi note 9 bricked for a week now.

CruisaderX said:
yow is that legit? Had my redmi note 9 bricked for a week now.
Click to expand...
Click to collapse
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If it keeps restarting, you've made any wrong modification. You need to follow your steps back and try to unmake your modification.
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

VD171 said:
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
[/QUOTE
Click to expand...
Click to collapse
I tried actually before after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting), I will call this state 1 brick. In state 1 brick you can still access fastboot mode normally. Then i tried to flash twrp hoping to just flash a rom to fix it leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot bootloader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi devices. Now I am stucked with a hard bricked note 9 with no way of fixing.

CruisaderX said:
i tried before actually after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting, I will call this state 1 brick. In state 1 brick you can still access fastboot mode. Then i tried to flash twrp hoping to just flash a rom leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot boot loader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi device. Now I am stucked with a hard bricked note 9 with no way of fixing.
Click to expand...
Click to collapse
You need to read every line and every word careful and follow only specific guide for your specific problem.
If you try to do anything you see, obviously you will cause more damages to your device.
Please, read my post again: https://forum.xda-developers.com/t/redmi-note-9-merlin-4-128-nfc-hard-brick.4201717/post-84379823
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

pls help me, strangest bootloop ever

Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot

NorternLights said:
Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
Click to expand...
Click to collapse
May be your fastboot process failed...try again or go to recovery and clean all usure data

i tried,but now my phone is a pricey brick.
never again an mtk devices.

I have suffered this situation few days ago, I was using platform-tool to install MIUI 12.01 recovery rom using flash_all.bat but got bootloop everytime. Then I tried to flash the fastboot rom via Miflash tool and finally it booted up, it also re-locked bootloader after flashing, but the phone is live again!
I also tried to Wipe User Data in Recovery ([Volume up] + [Power]) before flashed the ROM with Miflash. Didn't know if it'd fixed the problem.

Have you try spflash tool yet?

fortunately i was able to recover the device using miflashtool then i sold it and i bought a redmi 9s
dont buy mtk devices guys,worst experience ever

You must know what you do on MTK than its ok!!!

-CALIBAN666- said:
You must know what you do on MTK than its ok!!!
Click to expand...
Click to collapse
Mtk is made for poor people..if mtk is not available then we can not buy a smart phone....