I tried to use dotos but doesnt boot up then I used flashtool to boot into stock rom but it said your device is corrupt, I tried everything, like removing .ta file, then I used Xperia Companion, but it said this. How can I fix this please?
Related
I just tried to install pacman rom with CWM on my xperia z, it seemed to get stuck on install so i powered off, now its appearing to boot loop and showing the sony logo and nothing else.
Any ideas while i get googling?!
If you can still get into CWM, flash another rom. Else use flashtool an an original ftf
I cant get into CWM but can connect in fastboot and flash mode with flashtool.
Can i flash a custom rom this way?
You can flash stock roms & kernels, you'll have to reroot etc again but your phone will work again
There's plenty of unbranded software's for both 6603/2 in the development sections.
I use this one http://forum.xda-developers.com/showthread.php?t=2202685
Stock rom installed thank you!
Hello, i tried to remove cyanogenmod 11 from my sony. When i tried to flash stock ftf it stops in system.sin. getting an error that it cant open bundle blablabla. Right now im downloading other ftf, its 14.4.A.0.1.108. And before that i tried flashing 14.3.A.0.681 or something cant remember. the problemn is that i just excluded the system and then it worked fine, flashed everything else than system. When i start phone it doesent start, bootlooping in sony logo only. Does anyone know how to do? And yes i can use flashtool. Please help
I want a boot.img file.
This is what happened:::
I forgot to take a backup of the stock Recovery (boot file) and flashed a different boot.img using fastboot. And then my Stock ROM wont boot i.e. its in bootloop...all i can do is go to recovery. So i took a nandroid backup, and then changed the ROM, and then found out that all the ROM's gives less battery backup than stock Sony ROM, so i wanted to turn back to stock, but the problem is the boot file that got restored is the one that i changed at starting. So it back to boot looping again. For now it's power is off.
I tried CWM Recovery and TWRP and PhilZ recovery ,but all the the same. Bootlooping
Now i need a boot.img file to flash.
Please provide me with the stock Sony boot.img file or and other boot file that supports stock ROM.
My current Stock ROM version is 4.5.A.0.270. Model : Sony Xperia Z1 C6902.
Checked for solution all over the internet....hardly found anything working.
Need immediately solution.
Hi,
Why don't you download the FTF file for your device and just flash the boot using Flashtool?
All the best,
~Lord
Hi, Dear xda members
Last week i soft bricked my Sony Xperia Z c6603
After flashing modified kernel, i lost everything
I couldn't reach recovery even couldn't flash one with fastboot(as my device was not recognized)
I tried flashing offcial firmware through flashtool. It succeeded flashing
But After reboot i had bootloob and the ROM didn't boot
Finally I had a solution to get my phone fixed. Here's what i did:
*Reboot to FlashMode
*In flashtool I flashed TWRP Recovery in FlashMode
Now all custom ROMs are working but when I flash an official and other ROM's based on official, I'm having bootloops
Tried to wait. NO result
Could you help me with it?
P.S the modified kernel was made by this tool http://forum.xda-developers.com/xpe...ot-automatic-repack-stock-kernel-dm-t3301605/
When i softbricked my phone I tried to fix it according to this guide http://forum.xda-developers.com/xpe...rick-sony-xperia-z-c6602-c6603-c6606-t3215134
after i flashed the cm rom, i got the same problem. after flash the stock ROM or official firmware, It keep bootloop. how you fixed It ?
315cqab said:
after i flashed the cm rom, i got the same problem. after flash the stock ROM or official firmware, It keep bootloop. how you fixed It ?
Click to expand...
Click to collapse
Do you still need the method i have gone through?
do you know how to flash the official ROM or firmware back? now i can only flash the custom ROM
315cqab said:
do you know how to flash the official ROM or firmware back? now i can only flash the custom ROM
Click to expand...
Click to collapse
Sorry even i need this. Currently i have the same problem. I cant flash official firmware or the one that is based on official. I need the solution
Same here, after install CM 14.1, i can't go back to official or rom based in Stock...
gussbravo said:
Same here, after install CM 14.1, i can't go back to official or rom based in Stock...
Click to expand...
Click to collapse
I have several problems too including not being able to run stock anymore. (endless black screen after experia logo). I tried flashtool (latest stock via xperifirm), Sony's flashtool. Companion didn't even want to flash (UEGetPhoneInfoMissingInfo), and left me wondering wether something is corrupt.
I've been running CM's for a while now and was wondering why NFC was not working. Not sure if it needs an updated firmware or what.
Other problem I've seen is that "fastboot flash recovery" always gives an error. "fastboot flash boot" works (this is how I install TWRP).
Can I try zeroing mmcblk0 or would that brick it? (does it really need to have a TA partition to accept boot connection? How does Sony init it anyways?)
I think I have a mmcblk0 backup from after unlocking (DRM lost though) but perhaps that will give me a somewhat clean situation again. Or perhaps I can compare it.
Edit: dd-ed my old mmc backup and now Xperia Companion didn't give an error anymore, did a factory reset, and after a long wait of the blue waving animation, I got it to work.
Even NFC firmware update started after rooting and deleting /data/ucf folder.
Now I want to go back to Nougat xD
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
chauhanjayc said:
Hi Friends,
I have played a lot with xperia z and never got into such situation.
So i have been using this resurrection remix 7.1.1 rom 12122016 build, and wanted to switch device so to give this device to my family member i flashed .222 5.1.1 as he is not techy like me and wont be able to fix problems on his own.
now the thing is i am stuck at black screen after sony logo
I know kernel is there there is just some system issue and to fix it i did below things still no success.
1. flashed ftf 6602 (Double checked and re downloaded FTF in case ftf was courrepted)
2. used emma tool and updated phone
3. flash twrp and flashed Xperia_Z_eXistenZ_Premium_v4.0.0
non of about gave me stock Rom and now i am stuck at non system in my phone just kernel mean as soon as i start my phone there is sony logo but after that there is no process.
Help would be great solace.
Thanks
Click to expand...
Click to collapse
First of all: read the forum rules. After 1400 posts you should know that the GENERAL section is not the right place to ask questions like this.
Second: Wich file system are you using? If it's any other but ext4 you should format the storage using twrp.
Did you flash with Androxyde's flashtool, or just with Emma?
Hey ! i too experienced the same issue earlier today.. Only the latest build isnt working when flashed ..I flashed the kitkat build via flashtool and it worked.. is there any solution.. ? ive been trying since morning.. And another thing is that recovery also cant be flashed . So im literally stuck at this phase. :crying:
just flash a stock rom from flashtool i always encounter that when i corrupt flashing thru recovery.. like i fully wipe and forgot to put rom in internal lol
Flashed with both Emma and flashetool
Even tried custom lp rom via twrp but the same situation
Have you fixed your issue? I have the same case. I flashed it to stock ROM but the black screen is still occurring after xperia logo.
1. make sure your partition is ext4
2. download proper official Kitkat 4.4.4 firmware (.tft), flash it with Androxyde's flashtool (make sure the .ftf is not corrupted, driver is installed, good usb cable and 75% of battery or above).
3. if you wanna check the device is in good shape, try to boot up (in my case, I'll flash LP 5.1.1 right after flashing KK firmware is done).
4. if the device is boot up correctly, turn off your device and begin to flash LP 5.1.1 firmware
NOTE: somewhere on this forum say about the right version of flashtool to flash the firmware to our device, older version of flashtool. But I'm using version 0.9.22.3 and everything is fine. However, I can see that the flashtool is not using the newest engine while flashing my device (C6603) but using the older engine instead.
Hi,
I have already been in such a situation.
1) Try to flash (with flashtool) official 4.2 Android firmware, boot, then flash latest one (5.1.1)
2) Try to flash official firmware (4.2) with xflasher (https://forum.xda-developers.com/showpost.php?p=74122327&postcount=212, https://forum.xda-developers.com/showpost.php?p=74122295&postcount=2)
Good luck!
still having same issue with my z3, flashing with emma and tft but stuck on sony logo
I also met this problem yesterday.
I use the latest Flashtool and flash the latest firmware but it said The bundle does not match the connected device.
Then I use a older version like 0.9.18 to flash the latest firmware. The problem you said occurred. It stuck in black screen after Sony logo.
Here is how I fix it:
1. Use an older version of Flashtool to flash an older firmware such as 4.4.4_10.5.1.A.0.283 like me.
2. After flashing the old firmware it should be normally powered on. Then power off and enter the flash mode again. And flash the latest firmware, problem fixed.
Hope that my experience can offer a bit help for you.