G1 screen cracked but touch and screen working. Do i need to replace the digitizer? Can i find only the external glass/plastic cover? The touch function is working perfectly, thats why i think i dont need the digitizer.
Thanks
The glass is the digitizer.
http://cgi.ebay.com/New-Touch-Scree...wItemQQptZPDA_Accessories?hash=item439ea25897
I recently replaced a digitizer and amoled screen on the N1. The screen powers up just fine and the touchscreen is responsive when I leave everything out of the metal housing. After I put it in the housing, the amoled screen does not show anything. What should I be looking for? I can only assume the housing is making contact somewhere to cause this. Any suggestions? Thanks.
Greetings,
after I installed the full-size Nillkin full size screen protector
I bought for the new Mi8 (with Chinese rom), the proximity sensor failed and the screen started to look black.
Unfortunately, it did not work to calibrate the sensor in the morning
is there another way of resetting the screen guard detection of the sensor to the yard? ?
Screen protector problem, replace it with another or run without.
Hello people
Also, does any of you have a problem with the fingerprint reader response when using night reading (red filter mode for less eye fatigue).
By day (auto contrast set - stock) and the reader responds without problems.
However, when it gets dark and the phone starts to use night reading, the reader is often unresponsive.
Of the 4 scanned images, it usually takes only one, so I have to put my finger the same way to unlock the phone.
I use protective glass (9H 2,5D curved, tempered by Sigisi).
But I think there will be no problem, because the reader reacts with the glass without problems during the day.
Thanks for the reaction.
I guess that the night mode plus the protective glass is a bad combination
Did you set the fingerprint after applying the glass or before?
With the night reader mode it shouldn't be any problem. The phone automatically, when it detects a finger on the sensor, disables All screen filters. If you notice, when the blue light of the sensor appears, you'll notice that some colors lower it's contrast for a more precise scan. And with the glass, I have a non branded 5D glass and it works perfect. In the only situation that fails reading my finger, it's when I have my fingers wet (by the swimming pool) and wrinkled, but I think that it happens with every Fingerprint scanner. If the scanner works without the glass. The problem is the glass. If not. You want the warranty to remain valid
After aplying
Im thinking about buying this phone, but what worries me if fingerprint scanner works well with protective glass?
I'm using generic tempered glass from the start. Even registering my fingerprints with glass on. No problem so far. Just little advised,I'm using only my right thumb to unlock,and what I did is I repeatedly registered the fingerprint while I'm holding the phone so it will be more accurate.
By the way. I' also set my phone to be on reading mode at night.so far no problem with it. I'm on miui 11.3.3,stable official global rom.
axlina said:
Im thinking about buying this phone, but what worries me if fingerprint scanner works well with protective glass?
Click to expand...
Click to collapse
Just use a glass one and it should be fine, at least for me its 100%
Hello fellow users,
I have the Chinese version of the Reno, the PCAM00. One night I dropped the phone on the stairs, taking some real damage to the back panel and to the display. The LCD cracked, but the touch panel stayed in one piece . I replaced the screen by myself, I did a lot of screen replacements for other phones until now. Now I got this issue: the fingerprint sensor is not recognized anymore; I opened the phone again to be sure that I connected the under screen camera, all was in good order. After this re check, trying to set up at least one security check- except the password- because the phone is quite big and a 6 char password can be seen by near people, I tried to set up the face unlock. Still nothing, when I try to enroll a new face, the camera pops up and quickly retracts saying just "Sorry. Unable to enroll. Please retry." . The phone has this function, I enabled it in the past, but because is quite awkward to have the camera moving every time you unlock the phone, I disabled it.
Is it possible that the security functions are disabled by software? Have anyone encountered this issue? Is there a fix to it?
Note: I bought the display from aliexpress and the product description was "Original M&Sen 6.4" For Oppo Reno AMOLED LCD Display Screen+Touch Panel Screen Digitizer For OPPO Reno Display"
Any help would be greatly appreciated.