Related
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
dinoderda said:
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
Click to expand...
Click to collapse
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
What is gsi?
JoanSB1 said:
What is gsi?
Click to expand...
Click to collapse
Generic System Image.
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
dinoderda said:
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
Click to expand...
Click to collapse
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
MrViking said:
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
Click to expand...
Click to collapse
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
dinoderda said:
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
Click to expand...
Click to collapse
Thats ok, we all make mistakes lol.
Yeah, a pixel experience 9.0 gsi is coming soon, and these GSI's are pretty stable. If you need any more help you can ask me:good:
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
JoanSB1 said:
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
Click to expand...
Click to collapse
What is the exact problem you aee having? Bootloop? Error when trying to flash?
dinoderda said:
What is the exact problem you aee having? Bootloop? Error when trying to flash?
Click to expand...
Click to collapse
Error when trying to flash
JoanSB1 said:
Error when trying to flash
Click to expand...
Click to collapse
Tell me the steps in order which you did when you were trying to flash the ROM.
dinoderda said:
Tell me the steps in order which you did when you were trying to flash the ROM.
Click to expand...
Click to collapse
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
MrViking said:
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
Click to expand...
Click to collapse
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Can I install anything with lock bootloader?
box710 said:
Can I install anything with lock bootloader?
Click to expand...
Click to collapse
no
MrViking said:
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
Does the USSD code work? is that it is important to me and I do not know a ROM that works
dinoderda said:
Generic System Image.
Click to expand...
Click to collapse
Is there a guide to install this I paid DC unlock to get bootloader unlocked but on noughat and cannot find a twrp for noughat:good:
Pie gsi
Hi all,
I have installed Pixel Experience (Oreo) gsi ROM no problem. But if I try to flash any Pie gsi ROM it just goes into a boot loop. I flash system via fastboot and seems OK. Reboot and it just boot loops a few times and goes to the recovery screen that prompts to download and install the standard system.
Has anybody come across this or have any suggestions. I have tried a few different Pie gsi ROMs and same thing happens.
Thanks
Mick
We successfully booted the Android 10 AOSP GSI by phhusson. Got it flashed using fastboot.
Test in Realme C3/Narzo 10A. (RMX2020/RMX2027)
Steps to flash:
I am not responsible for your loss
Note (all your data will get erased back it up if you are not lazy )
1. unlock bootloader
2. enable usb debugging
3. adb reboot fastboot
4. fastboot reboot fastboot
5. fastboot --disable-verification flash vbmeta vbmeta.img
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot -w
9. fastboot reboot bootloader
10. fastboot erase usrdata
11. fastboot reboot
Not Working:
VOLTE
VOWIFI
Some Fixes For GSI
For this fixes to run you should have adb running on you pc and have your devices connected via adb
>adb shell
>su
Brightness_Fix:
setprop persist.sys.qcom-brightness 2047
Headphone_Jack_Fix:
setprop persist.sys.overlay.devinputjack true
Google Play Service Fix
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Download Link:
https://github.com/phhusson/treble_experimentations/releases
Flash on the ARM64 ab build
Android version: 10
Build Author: https://forum.xda-developers.com/member.php?u=1915408
{Mod edit}
Special thanks to @phhusson, Google and all other developers.
Thanks to Okta Viano to test the GSI in his device.
@sarthakroy2002
We only grant developers the privilege to provide a link to their social media in the OP of their own development threads. These conditions obviously don't apply to you or your thread. Reference to Telegram has been removed.
Additionally, I've moved the thread from the development to the "Guides etc." section. Please refer to here.
Bluetooth calling issue in Samsung Galaxy M30S with GSI ROM PixelExperience
Hi, I have flashed my Samsung Galaxy M30S with PixelExperience-10.0-20200328-GSI-ARM64-AB ROM, Everything is working fine except Bluetooth calling, Bluetooth music is working but unable to receive/connect calls via bluetooth.
Can someone help ?
back it up if ur not lazy. lmao that so funny ???
This rom fix gyroscope delay in Pubg???
Sarathi4936 said:
This rom fix gyroscope delay in Pubg???
Click to expand...
Click to collapse
noo
sarthakroy2002 said:
noo
Click to expand...
Click to collapse
You can fix it??
Sarathi4936 said:
You can fix it??
Click to expand...
Click to collapse
No one can fix indeed...lmao
Anything else not working?
Any Experience?
How's this GSI so far?
Battery performance any review ?
Are there any ROMs with notch support, or is there a way to adjust the status bar margins? I'm tempted to flash this on my RMX2020.
Need Help through this !!!!!!!!!!!!!
Facing an error ____ System partitioned doesn't exist (got an error at very beginning of the process )!!!! while Gsi flashing on Realme 7 RMX2151(MTK G95) , seeking help here & there.
...Saurav said:
View attachment 5234329
Need Help through this !!!!!!!!!!!!!
Facing an error ____ System partitioned doesn't exist (got an error at very beginning of the process )!!!! while Gsi flashing on Realme 7 RMX2151(MTK G95) , seeking help here & there.
Click to expand...
Click to collapse
sorry previous one was my fault (was skipping a line of command ) but now I"m facing is that my device is booting into fastboot mode but got stucked on recovery(stock) page & on cmd its shows waiting for device .(previously tried on CUstom PBRP recovery same result that's why this time tried with stock recovery but same can't boot Dynamic Fastboot.
Need testers for egis fp in gsi with realme ui 2 base
rabim94 said:
Need testers for egis fp in gsi with realme ui 2 base
Click to expand...
Click to collapse
Confirmed working in realme UI 2 base. Need testers for UI 1 base
Hello everyone so I have a Samsung galaxy M21 with One UI 3.1 core. Are there any lineage OS official or unofficial builds for Android 11? If you know please reply to this, thank you in advance!!!
Join telegram
they have CrDroid android 11
sinkoo1979 said:
Join telegram
they have CrDroid android 11
Click to expand...
Click to collapse
Thanks so much I'll join the telegram channel.
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
GuruPrasadAH said:
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
Click to expand...
Click to collapse
Any GSI you will recommend? (for M215G)
OldNoobOne said:
Any GSI you will recommend? (for M215G)
Click to expand...
Click to collapse
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
GuruPrasadAH said:
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
Click to expand...
Click to collapse
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
OldNoobOne said:
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
Click to expand...
Click to collapse
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Bro thanks so much, I will try your steps and tell you what happens ok
GuruPrasadAH said:
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Click to expand...
Click to collapse
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
OldNoobOne said:
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
Click to expand...
Click to collapse
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
GuruPrasadAH said:
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
Click to expand...
Click to collapse
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
OldNoobOne said:
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
Click to expand...
Click to collapse
Just a few clarifications:
1. I only made the flasher zip for the vbmeta. The image itself - was provided by google.
2. This zip should and will probably work on all phones, except maybe a few with weird vbmeta partition name( samsung vbmeta partition name is actually vbmeta_samsung instead of vbmeta only, and I think LG does the same too).
If it does not work( shows failed msg ) then send me the link of that device's twrp. I will maybe make an update if i find time.
Chill
GuruPrasadAH
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
GuruPrasadAH said:
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
Click to expand...
Click to collapse
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
OldNoobOne said:
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
Click to expand...
Click to collapse
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
GuruPrasadAH said:
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
Click to expand...
Click to collapse
Thanks bro, t.me is crazy with bots monitoring everything. Its not very secure as per me coz it downloads unwanted things to our device. It feels like as if soviet kgb is watching every group we join LOL.
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Fredin_ said:
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Click to expand...
Click to collapse
Hi Fredin bro, long time ..how you been? Youre the most helpful nice guy in t.me
My Redmi Note 10 came with MiUi 12.5.1 Android 11 out of the box, in these two months that ive been using Nebrassy2-Twrp and its different than Soulr344-Twrp, (Soulr344-Twrp 'super ' command = Nebrassy2-Twrp '#su' command), I couldnt flash GSIs using ( TWRP-3.5.2-mojito-Nebrassy-2.img ) so far.
Ive requested Soulr344 dev to make Soulr344-Twrp for RN10 Mojito/Sunny. If he ever drops by XDA perhaps he might notice.
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the ArrowOS for OnePlus 6t
Click to expand...
Click to collapse
Installation instructions
1. Install R Stock Rom onto your phone , follow some tutorial you can find in this forum
2. Flash boot.img and dtbo.img by typing fastboot flash boot boot.img and fastboot flash dtbo_a dtbo.img and fastboot flash dtbo_b dtbo.img
3. Wipe your userdata by typing fastboot erase userdata
4. Reboot the phone and immeditly do the recovery key combination
5. In Lineageos recovery select install and then sideload from adb
6. On your computer type adb sideload pathtotheromzip and press enter
7. The rom should now be flashed , flash gapps and other mods like magisk the same way
Click to expand...
Click to collapse
Download
ROM
RECOVERY
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:08.11.2021
[note] 2nd Release of ArrowOS 12.0
[new] Audio works now , wifi works now , userdebug build
[changed] userdebug build now
[fixed] audio wifi
Older changelogs:
Click to expand...
Click to collapse
Code:
Current changelog:05.11.2021
[note] 1st Release of ArrowOS 12.0
[new] Android 12 R
[changed]
[fixed] Rom boots into OS
FAQ
What doesnt work ?
fingerprint,,and maybe others
This rom is for fajita only
VOLTE DONT WORK
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@LuK1337
Sources
Code:
[URL="https://github.com/J0SH1X/android_kernel_oneplus_sdm845"]Kernel[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_sdm845-common"]Common[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_fajita"]Device[/URL]
[URL="https://github.com/J0SH1X/proprietary_vendor_oneplus"]Vendor[/URL]
Wow first 12 build. But will be wait till fixing things by dev as described. Best of luck.
omg this is a good start
Thanks waiting
I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.
That's a good start.
digidude512 said:
I don't see in the instructions what to do with the rootfs.tar.gz file from the Recovery link.
Click to expand...
Click to collapse
you dont , the rootfs.tar.gz is for running full desktop ubuntu on oneplus 6t
small update audio is fixed wait for next build maybe even more till then
J0SH1X said:
small update audio is fixed wait for next build maybe even more till then
Click to expand...
Click to collapse
wifi fixed fp kinda works but not quite yet
Don't understand this thing
The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.
koobie777 said:
The flashing instructions you have listed don't seem to be working for me. When i enter recovery im still in stock recovery. the dtbo.img is flashed to both slots too as well as boot.img.
Click to expand...
Click to collapse
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?
New Release with fixed audio and wifi bt audio may or may not work , also fingerprint sensor will be detected now but it fails to illuminate the sensor so systemui will crash
Release fajita-20211108 · J0SH1X/Lineage-OTA
host for json response file for supporting ota updates on unoffcial lineageos || EOL FIND ANOTHER IDIOT TO DO YOUR **** - Release fajita-20211108 · J0SH1X/Lineage-OTA
github.com
J0SH1X said:
try to flash boot to slot a and b , also dont expect any touch recovery its normal e3 with some extra stuff added or do you mean oneplus recovery?
Click to expand...
Click to collapse
Yeah it booted to OnePlus recovery, your instructions though mention using the recovery buttons command I tried vol. Down + power but I also tried just booting to recovery from bootloader, both booted to OnePlus recovery. I'll try to flash boot to both slots tonight. Testing out PE A12 GSI today while I'm at work. I'll have to MSM back to stock first to try your build out. I'll also test out bugs if I get it to boot and throw a logcat up.
Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there
Tushi001 said:
Hey dev do you have any telegram group we people can hope in and ask for doubts xda seems to slow the process of asking doubts id someone stuck at recovery.
I will highly appreciate of telegram is there
Click to expand...
Click to collapse
LineageOS 19 - OnePlus 6T
Group to discuss about the Alpha Builds of LineageOS 19 based on Android 12 for the OnePlus 6T.
t.me
Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.
Happy to see arrow OS on fajita! thank you
MrUrgit said:
Can get this to boot, but can't change the recovery from the standard OnePlus recovery. As a result, sideloading .zip files fails because of signature verification (I can't see any option to disable that in the standard recovery).
Wifi is also still flaky on the latest build. It did connect once but now won't reconnect.
Click to expand...
Click to collapse
okay can you maybe provide logs or so , i dont see any iusse with wifi anymore
Did Google open source wallpaper based color themeing? I didn't keep a track recently and wanted to know id its included in custom roms like this one.
why Pixel experience rom is not available for redmi note 10s yet?
i beg developers attention, plz make this rom for redmi note 10s
there is not an official TWRP, thats why.... but you can still install GSI roms
maur0p said:
there is not an official TWRP, thats why.... but you can still install GSI roms
Click to expand...
Click to collapse
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
is there any change to release pixel experience for redmi note 10s
shiblu06 said:
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
Click to expand...
Click to collapse
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
J6idot said:
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
Click to expand...
Click to collapse
but eventually note 10s will get pixel experience right , i mean without bugs
phoenixnithish2112 said:
but eventually note 10s will get pixel experience right , i mean without bugs
Click to expand...
Click to collapse
too late
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
kidbetin said:
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
Click to expand...
Click to collapse
No, you will get a nice bootloop if you try that
tutibreaker said:
No, you will get a nice bootloop if you try that
Click to expand...
Click to collapse
thank you
what rom can i flash with the pe recovery?
kidbetin said:
thank you
what rom can i flash with the pe recovery?
Click to expand...
Click to collapse
none if you want still have a phone to use
There is one rom now https://download.pixelexperience.org/rosemary/
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
Flash a recovery on your device by typing (replace <recovery_filename> with the actual filename!):
Click to expand...
Click to collapse
fastboot flash boot <recovery_filename>.img
Click to expand...
Click to collapse
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
Hey, I ran into the same problem today. If I find a solution, I'll let you know. I would be glad if you share too.
I tried again yesterday to install Pixel Experience, and again it just boot loops when booting into recovery mode. I've now reinstalled stock Miui and will try again.
portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
xuser_0 said:
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
Click to expand...
Click to collapse
I've no idea what version of the bootloader I'm on as getprop ro.bootloader returns 'unknown'
But, as I'm on "latest" v13 Miui, I suspect the bootloader is the wrong one. Do I have to downdate to 12.5 before installing PE?
Edit: I've downdated the device to 12.5 RKLMIXM and have flased the PE recovery image, all okay. It's now installing the PE zip, so fingers crossed that's it.
Edit edit: I have PE on my device! Thank you at @xuser_0 for highlighting were I'd gone wrong.
The key @JohanGriman appears to be to ensure your device is not on the latest Miui but the latest 12.5 version.
Is there any instructions on how to install Magisk on this? I've tried to usual ways (via apk and flashing .zip thru adb sideload) but it fails to repack the boot image. Will a manual patch of the boot image and reflash work?
Edit: I've been able to directly patch the PE recovery image (as used in the installation process) using the Magisk apk on my device. Can I now flash this patched image to the device?
I don't want to try it as other instructions I've found talk about a vbmeta image that needs to be flashed too, and I don't know if that's necesary.... and I don't want to trash my device again!
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
xuser_0 said:
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
Click to expand...
Click to collapse
Thanks, that worked perfectly