I was tweaking in the visibility enhancement section in A12 and somehow the screen zoom is changed and I can't remember the correct value.
I searched the forum for answer but couldn't find an answer
Performed reset accessibility settings and restored normal values.
Kindly delete or close this thread.
Related
I accidently posted this in the general thread instead of the Q/A thread. Can't seem to move it there. My sincere apologies.
I am trying to get Stunner 2, specificly pie controls and performance control, to fully work on my note.
Symptoms (on both 2.3.3 and 2.3.11):
- Pie control turned on but not showing. Tried about all combinations of pie control settings to get it to work.
- Performance control shows slider handles fixed to the far left, and cannot be moved.
- Superuser access notifications seem to be off at times (ie. showing 'Superuser granted to Theme Chooser' when i toggle Pie controls)
These symptoms occur directly after flashing the ROM and initial setup (no settings changed, no apps installed). I have also tried it while having extended desktop turned on as some suggested and tried multiple dpi settings.
I have tried to reflash the ROM multiple times, following instructions to the letter (this is my first post here but i'm a frequent visitor and have flashed probably over 50 ROMs on my note in the past). So full wipe, dalvik cache wipe, /system format etc.
Have been searching for a solution for hours now, have scanned the entire development thread, forum search, google, you name it... to no avail.
I loved stunner v1 back then and the vids showing off the pie controls make me Want it!
Any help with this would be greatly appreciated!
1) Pie control turned on but not showing. Tried about all combinations of pie control settings to get it to work.
2) Performance control shows slider handles fixed to the far left, and cannot be moved.
3) Superuser access notifications seem to be off at times (ie. showing 'Superuser granted to Theme Chooser' when i toggle Pie controls)
Answering you:
1) Did you try to slide your finger from out of the screen to the inside? Because i never had a single issue with Pie
2) doing some reading before posting and using search would help a lot, this is a known issue...
3) Install SuperSU? It has more features and it is more stable!
banenl said:
Symptoms (on both 2.3.3 and 2.3.11):
- Pie control turned on but not showing. Tried about all combinations of pie control settings to get it to work.
Click to expand...
Click to collapse
I have the same problem.
I must admit, it never crossed my mind to try PIE as I've never used it before and I was busy getting used to AOKP/CM10.1 having moved from TW JB.
Thought I would try it as you mentioned the problem and I can't get it to work either.
I am running on 240DPI, don't know if the DPI has anything to do with PIE functioning correctly.
I did think of looking for the app and wiping data and cache, but I can't find anything that looks like it is PIE.
Not the end of the world for me as I didn't intend to use it in the first place, but would be interesting to see how it works.
---------- Post added at 02:21 PM ---------- Previous post was at 02:09 PM ----------
Looks like it might be DPI related.
I am running on 240DPI, and this I haven't changed.
The default PIE settings didn't work for me, so I changed them to the following:
Trigger Size - Big (This is what makes it work!!)
Pie Gravity - Right (shouldn't matter, but I wanted it on the right)
Pie Size - Large (Gigantic is too big for comfortable one handed operation, with Small the info text is too small for me)
Pie Style - Default (default)
Pie Gap - Huge (default)
The other settings are personal preferences.
All working fine for me now.
EDIT: I have changed the Trigger Size from Huge to Big, as I had some problems with the trigger area overlapping with my on-screen keyboard, so bizarrely I couldn't press the P key on the keyboard. Setting the Trigger Size to Big has resolved this.
Had this problem too and was very frustrated with it. But thanks - changing trigger size to BIG makes it work!
Thanks lots!
On the ANCE firmware I was able to download the Google camera and then the first time I tried to open the camera from the lock screen I could set it as the default. On the ANG3 firmware it does not give me this option. Is there any way to change the lock screen camera app?
I can see that all the topics with this question are "full" with constructive answers (((((
Really disappointed about this
First and foremost, I'd like to apologize for posting here, normally I would post to the relevant rom thread, but I am too new to do that.
The rom I have flashed is the one in this thread: https://forum.xda-developers.com/oneplus-3t/development/rom-resurrection-remix-5-8-0-oms-t3527338
I have a a small issue and one big one.
My first issue is with srgb mode. When I go to developer settings and toggle it, it does nothing. If I turn it on and re open developer options the switch is set to off. Is this something the kernel is forcing? I can't take the oversaturated colors, they give me bad migraines if I see them for too long.
The other issue is with adding quick setting tiles. When I click the edit icon and try to drag o e of the tiles up it stops short and will not scroll to the area I need to drop it in.
Please help.
Thanks.
The sRGB issue is common between all Cyanogenmod/LineageOS based roms, even on the previous Oneplus2 so there's not much you can go about it other than running another kernel with KCAL control and adjust color values yourself. The other bug is probably something local to RR so just wait for update and maybe it gets fixed someday.
Sorry to come with such a seemingly stupid question, but I'm at a loss on how to fix my issue.
I recently switched from a OnePlus 6 to the S21U and find that everything on my S21U is way too big. I went into options and already changed the screen size and font size to the smallest options, but it's still larger than I like, and fewer items fit on my screen than I'm used to.
Google doesn't provide me any good results, since the results are polluted by the available options or camera zoom.
Is there a way to change display scaling even further, e.g. via a mod? My phone is rooted and I have installed Dr. Ketan's ROM which includes some version of Xposed.
Nemesix_ said:
Sorry to come with such a seemingly stupid question, but I'm at a loss on how to fix my issue.
I recently switched from a OnePlus 6 to the S21U and find that everything on my S21U is way too big. I went into options and already changed the screen size and font size to the smallest options, but it's still larger than I like, and fewer items fit on my screen than I'm used to.
Google doesn't provide me any good results, since the results are polluted by the available options or camera zoom.
Is there a way to change display scaling even further, e.g. via a mod? My phone is rooted and I have installed Dr. Ketan's ROM which includes some version of Xposed.
Click to expand...
Click to collapse
You are a genius! Thanks a bunch!
Problem solved. Thread can be closed.
Hello, I downloaded SetEdit on my phone today and I have questions about 2 values
- The first one is deviceLevelList, I know it enables blur effects but for some reason, setting "g:1" to 3 doesn't enable the blur effect and I find the gray background quite annoying
- The second one is a value I modified by accident, it's "misettings.support.repost", I don't know what it does so I set it back to 1 but if anyone knows what it does, I would love to know!
Thanks in advance