Greetings,
Im at my wits end. When i flash twrp from bootloader, everything looks fine. When i sideload it, so i can install it as recovery or install zip or img from the internal space itself and when i immediately reboot to recovery it loads for some reason with very low brightness but still works. It shows brigthnes at 100% but its very low. I delete all required, advanced wipe etc.. Boot b, so the lineage rom installs on A and sideload it. Then i install the twrp again, because lineage recovery replaced twrp. And i boot the phone, rom boots just fine. I set password so the TWRP can decrypt the storage. But when i go back to recovery, it gets stuck at splash screen. Then when i try to flash the twrp.img from bootloader it loads just fine, but shows internal storage encrypted and doesnt even ask for pin.
So i think im dealing with some encryption issue, also why the twrp is with such low brigthness? I tried everything i could for couple hours. But i give up , and thats why im writing here in hope, some good soul will help me.
//Edit Tried to flash force decryption after rom. Didnt help.
Appreciate any tip.
What TWRP are u using?
Related
this is what i've done.
lenovo k3 note with twrp 2.8.7.2_K3_CUOCO92 and rom K3_LOLLIPOP_5.0_ROW_v1.12
i wanted to install one of the latest nougat rom. so i downloaded a twrp 3.1.1.1 made for the k3 note. i flashed the image from my old twrp and replaced choosing the RECOVERY partition.
Flashed ok, i tested a rom, AospExtended-v4.4-aio_otfp-20170708-1051- i flashed it and it worked.
OK BUT.............. i did not wipe the data partition because i received AN ERROR. the new nougat rom was ok but it was a superdirty flash with all the old apps that were crashing. what to do?
i enter into twrp, i REMEMBER that i had the data partition ENCRYPTED so i format it and after doing this i was able to do every wipe i want, included data.
OH PERFECT...... THIS IS WHAT I THOUGHT. i made a full wipe of the rom wiping 4 thinkg : data , internal storage, cache and dalvik cache.
reboot and BOOM. black screen. i press 3 or times the power button and the creen goes on... i am into twrp. from this moment i never returned to see my SYSTEM!
i tested other roms, same problem. i thought it was a twrp problem.... so i installed from the twrp an IMAGE of other twrp... i tested 2 or 3 other twrps specific for my phone k3 note.
I HAD LITTLE BENEFITS with another one.... just because when i press to reboot into system... the phone reboots into twrp AND I CAN SEE IT because the screen is ON, whilst with the "latest" twrp i found...... despites the flashing procedure was ALL CORRECT without errors, at the reboot i always entered into twrp...... BUT INTO A BLACK SCREEN MODE, like if the screen was on...touch enabled, but OFF backligt, and the only way to revive it it is to press power 2 or 3 times, to see the home of the twrp.
i've also found that on MOUNT.......... i always see SYSTEM unflagged, ok i flag it, reboot into system, actually reboot into twrp and system is UNflagged, i try the same thing ALSO flagging READ ONLY...... , idem reboot, twrp.
SEEMS THAT i cannot boot to system anymore. but..... if the twrp was fault, why for the first time let me flash the phone? i really entered into the nougat rom! i found all my old apps and files, but of course it was a DIRTY FLASH, i just wanted to make some wipes.....re flashi the rom.... but oddly i missed the possibility to return anymore to the system.
what could i do at the moment?
how to flash a original image? how to see if this recovery is ok? i donkt 'know where to find my answers......
ah last thing, while into the recovery i was always able to transfer files from pc to phone, but from minutes i am NO MORE ABLE to see the internal memory of the phone.
my computer does not see anything!!! so i am fukked i think....... i did not make anything different.
i only made a lot of wipes... a lot of flashing a lot of testin into recovery. i was able to see it from my pc and put new files through pc. now NO.
solved. i flashed with flash tools an old original firmware android 5.0, then i flased latest twrp with flashtool.... and then flashed the zip of a custom rom.
BL
if u have backup then restore ur stock version or reeboot??
Hi,
I'm having a bit of trouble. I had a brand new Redmi 4X, and I was advised to install TWRP, root it, and install the Xiaomi.eu rom until LineageOS is released. I unlocked the bootloader, flashed TWRP, managed to get into it once and now I can't do it again. When TWRP loaded it asked me for a password for decryption but it let me just skip it it seems (not sure if that is the problem) but now I can't boot normally, I can't boot into recovery, but fastboot seems to work okay. How do I go about fixing this?
I've tried reflashing TWRP but I still can't get to it, and I don't really know enough about this stuff to know where I've gone wrong.
UPDATE - I think this is to do with dm-verity and having the stock kernel installed. Now it's too late to undo what I've already done, so I hope to god that someone knows how to fix this.
UPDATE - Right, the problem is solved I think. I had to do an awful lot of googling, and I'm not entirely sure what it was specifically that fixed it. But I found a guide that taught me the fastboot command "fastboot boot twrp.img" which saved the day. Even when my phone wouldn't let me into recovery, it allowed me to flash a no-verity.zip which i think is what allowed me to boot, and it allowed me to flash superSU.zip and then the ROM I was aiming for. And now I've booted into the ROM successfully and hopefully I am rooted and all is well. Plus I can access TWRP as normal now.
Any help would be greatly appreciated
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
brljak83 said:
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
Click to expand...
Click to collapse
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
brokemyG2 said:
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
Click to expand...
Click to collapse
Hii
I just have been reading about this bootloop
Go over here and read all of the 6 pages..will not take much time but could help you out much
https://forum.xda-developers.com/xiaomi-redmi-4x/development/official-twrp-3-2-1-0-xiaomi-redmi-4x-t3718217
Hey, I have exactly the same problem. Latest stock rom, flashed twrp in fastboot and got into the boot loop. Nothing works. I can only enter fastboot. What exactly did you do then? What is this no-verity.zip? I can't find anything about it.
I had a problem
I unlocked bootloader then installed redwolf recovery and took a nandroid backup. After that i rebooted to system but stuck into bootloop, could not boot to recovery, could not boot into system, So the only thing worked was that i flashed fastboot rom with mi flasher. And syccessfully rebooted to system with bootloader locked and stock recovery. So, if anyone have same problem you can do the same. How do i install recovery safely again? Should i use TWRP only? Should i flash v3.1.0 with lazy flasher or v3.2 directly without lazy flasher? I don't want to stuck into bootloader again, have to get all data deleted.
I was on MUI9 Nougat 7.1.2. Unlocked my bootloader properly. Wanted to try out Google Camera. So I searched the forum, found TWRP 3.0.3 Installer. Installed the TWRP successfully. Then I thought of installing the new TWRP, so flashed TWRP 3.2.1 from the previous TWRP. When I booted back to Recovery, saw the Encryption Error. I never set any password. Got tensed. Searched the forums again for solution. Found that I have to format the data. So formatted the data, flashed LazyFlasher. Did not know what else to do, tried booting and got stuck in Bootloop. I only have Internal Storage. And have one OTG Pendrive in case it comes handy. Downloaded Dot OS 7.1.2 and tried to install it from the OTG by booting back to TWRP, failed, it said Corrupt ZIP, but the zip file was ok. So started the process again, rebooted back to TWRP, wiped everything and this time tried to flash an old MIUI9 Recovery ROM through it, it still gave the same error, Corrupt ZIP. So basically what I have left is that I can boot into TWRP and also Fastboot is working well. But dont know how to get past this Bootloop. Someone please help. Really urgent. So tensed. :crying:
do you flash miui rom in twrp or miflash? try to flash the miui rom with miflash and see if ur phone booted up or not.
Deleted
Deleted
Thanks bro. Never mind. Somehow managed to flash DotOS Nougat version through TWRP 3.0.3. Now bro please tell me one thing. I wont stay at DotOS, I dont like it, just flashed it to get through the bootloop. So now I have downloaded MIUI9 8.3.22 Developer Recovery ROM. Still having TWRP 3.0.3, BL Unlocked, ADB working, Fastboot working, USB Debugging everything taken care off. Just tell me steps to flash the Developer ROM now so that I dont go into bootloop again. Please. Thanks in advance.
ummm kinda easy actually, download the miflash software, open it, it should have the select, refresh, and flash menu. click select, and navigate to your rom file (u need to download the fastboot rom version! not the recovery version, should be easy to find in google. the format should be .tgz change it to rar, extract it, it will shows another rar extract it again, it should be folder now) that folder is your rom file. now enter fastboot mode, plug ur phone, and click refresh. it will shows some number and alphabet. if the number and alphabet appears, click flash! and wait! and ur phone will boot itself
sorry for **** english
1. Go to twrp...
2. Wipe (cache, data, dalvik/cache, system)
3. flash miui 9 dev 8.3.22
4. flash lazyflasher...
Reboot..
It will take more then 5 min to start (first boot usually take that much time)
Your phone boot normally....
If you are facing TWRP Recovery Issue then update TWRP
Link :- https://drive.google.com/drive/folders/17YW09XpEHq7xgBAriwA-mgtEG0pckop2?usp=sharing
V3.2.1-5 is latest one...
Hit thanks
From my Redmi 4X using Tapatalk VIP
Hello guys!
Yesterday I tried to flash the newest Lineage-built to my new G7+ (XT1965-3, bought in Germany via Amazon), but something went wrong and now I'm afraid, I bricked my phone.
It's not my first flash of Lineage, as I did this in the past already on some older Phones (SII, SIII, S5), but it's the first time, that I have a major issue.
So I followed all the steps on the Lineage-Wiki (on Win10).
After flashing the recovery (the lineage-recovery, not TWRP) I wasn't able to enter the recovery-mode, so the phone booted to StockRom. And probably this was the problem: As it didn't react to VolumeDown+Power, I reflashed the recovery a second time. After that the touch-screen is not working any more.
I am able to enter the recovery-mode and I can boot to Stock-Rom, but in both modes the phone does not react to touch, so I can only use the Volume- and Power-Buttons.
Probably I made more mistakes after that: I thought, that a factory-reset would help, but It didn't. I also relocked the bootloader, but as I saw, that it also did not bring any solution, I unlocked it a second time.
Conclusion: I have a brand new phone, with lineage-recovery, an unlocked bootloader but without touch working.
I also tried to flash Lineage, but the sideload got stuck at 47%. So Lineage is not installed and it boots into Stock, where I can not get any further without touch.
Has anyone any idea, what could be the issue and how I can fix it? I would like to start from scratch, but I don't know, what is the exact problem and if i can for example return to stock recovery.
Thank you!
---- EDIT ----
If it helps: I am able to boot TWRP via "fastboot boot twrp-xxx.img". And in TWRP the touch works!
I could flash lineage directly via TWRP from external sd-card, but i am afraid that after that I won't be able to return if something goes wron.
probably your best bet is to go right back to stock using the LMSA tool and starting fresh. I've seen others encounter similar issues on different devices and always the cleaneast solution was just to role back everything and start over.
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
joglxv said:
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
Click to expand...
Click to collapse
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
digitaljeff said:
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
Click to expand...
Click to collapse
I'm having a similar problem. At first touch was fubar but I was able to return to stock using LMSA and now touch works. I can load TWRP with fastboot and even install a custom ROM and TWRP, but installing any custom ROM results in a boot loop during the finding and installing updates part of the phone setup during first boot. I'm tried Evolution X which I was running previously(for about a month, and then a boot loop started yesterday), PixelOS 10, and AncientOS, but all result in the boot loop on first boot after connecting to wifi.
Fixed
I fixed this somehow by manually flashing the latest stock firmware to slot a, and then extracting the evolution x Rom and manually extracting the IMG files inside and manually fastboot flashing those to slot b. I then set b as the active slot and booted up, patched the boot image with magisk, flashed that, and everything works. Not sure why twrp wouldn't do the trick.
Finally had the time to install Lineage. Now everything works.
I followed the instructions someone posted in the [ROM][OFFICIAL] LineageOS 17.1 [nightlies]-thread and the instructions of the lineage-wiki:
1. fastboot boot TWRP
2. sideload the copy-partitions.zip from lineage-wiki
3. factory reset via TWRP (wipe cache, dalvik and data)
4. sideload lineage
5. reboot bootloader
6. fastboot boot TWRP
7. sideload magisk
8. reboot system
Had a little bootloop the first time rebooting the system, but that was because I forgot to wipe data-partition in step 3. Wiping data and rebooting did it for me.
So I have a working Lineage17.1 with root via Magisk.
Thank you for the help!
I had exactly the same problem like you had. Bought a brand new moto g7 plus and after recovery flash, Touchscreen was not working anymore. I could manage to go back to the bootloader, sideloaded TWRP, but side loading lineage worked for me then. It seemed to be stuck on 47 percent, but this seems to be a normal issue, the file was there and after installing, touchscreen worked normally.
Since I never had a problem with an update in years, and I'm also a very stupid person, I didn't backup my data before my latest custom rom (Pixel Experience Plus) update.
I got the notification for the November security patch updates, and I downloaded the zip as usual. For the actual installation I usually reboot my Mi 9T Pro into TWRP, flash both the OS update and Magisk, etc. and reboot. Everything seemed to go smoothly as usual: TWRP asked me to input my unlock sequence, then the usual stuff. Problem is, when I tapped 'Reboot system', it didn't reboot normally: it went into Recovery mode again, and from that moment on there's been no way to do otherwise. But now TWRP doesn't ask me the unlock sequence anymore and looks like there's no way to access the data. I tried injecting the recovery from fastboot, I wiped everything except internal storage (I don't give a damn about the OS anymore at this point); I also tried to reinstall the same old rom from OTG after wiping System, but nothing. Whatever I do, it always boots up in Recovery, and it doesn't ask me the unlock sequence. I know my stuff is still there, it's just that the contents of sdcard aren't accessible and look like random alphanumeric sequences from the TWRP file manager. And yes, that's the whole point of encryption, but I was used to TWRP asking me to unlock/decrypt so in the worst case scenario I would be able to access my data and copy via OTG. But now, with the system unable to boot and the recovery not decrypting my stuff, I'm starting to losing hope. I'm sure here on XDA there are much smarter / knowledgeable people than me, and I hope somebody can help me find a way to break the cycle and return in possession of the data that I stupidly didn't backup.
Any help would be greatly appreciated!
Try reflashing the boot image. Failing that, you should be able to ADB sideload the update via TWRP.
V0latyle said:
Try reflashing the boot image. Failing that, you should be able to ADB sideload the update via TWRP.
Click to expand...
Click to collapse
I think I tried both. I say 'I think' since my knowledge could fail here.
I tried re-flashing the TWRP img from OTG, nothing changed.
I successfully sideloaded the OS through ADB, but I'm still stuck.
Should I try both? (In which order)?
Thanks a lot.