Related
The official Android Pie 9.0 update from SAMSUNG is months ahead. Thanks to @phhusson!:angel: We can now get a taste of The Sweetest Release of Android ever!
This is a GSI (Generic System Image) and will most Probably work on all Devices running 8.0 or above (your device must be fully Treblized )
Telegram Channel
Enjoy Android PIE!
Video- https://youtu.be/VfmzkIVSzu0
What Works-
-RIL(Calls,sms,lte)
-Bluetooth, WiFi
-Camera( Stock isn't that great) Use GCam)
-Fingerprint
-and pretty much everything
What Doesn't Work
-Iris Scanner(with high hopes that it'll work in future updates)
-Telephoto Lens( also may work in the Future)
Links and Instructions in the 2nd Post
Links and Instructions
LINKS-
Android Pie 9.0 Phh-GSI https://github.com/phhusson/treble_experimentations/releases/
Gapps
GCam By IDan with Working Dual Aperture!
Google Camera
ADDONS
BRH4 Vendor (flash this first if getting boot loop)
NOTE-U need to be on a Treble Supporter ROM like Stock, any vendor will work)
GSI strands for GENERIC SYSTEM IMAGE
Instructions -
1. Check your device architecture and download the GSI.img accordingly, also download the appropriate gapps for this device
2. Reboot to recovery and Wipe system,cache,dalvik,data(backup previously if you want)
3. Go to install section and find the GSI(choose to install image)
4. Flash the gsi to system partition
5. Now REBOOT to RECOVERY again.
6. Now flash the Gapps.zip normally
7. Reboot to system
8. Enjoy!
[FIXES]
1. If bluetooth doesn't work the try Clean flashing again with latest stock firmware and Vendor
2. If Black screen appears when trying to add Google account then select Chrome in Android Webview Implementation in Developers settings...
Even if that doesn't work then to to twrp(backup data if required) then wipe system the flash GSi,reboot again to recovery and then flash Gapps( micro is recommended) now reboot. Skip the Google setup wizard by not connecting to WiFi or LTE. Now choose sideload Chrome(install via apk) and choose in Webview Implementation)
3. If webview implementation thing isn't working:
Backup data via TWRP. Wipe everything except data, sd card and internal storage.(wipe system partition also) Now flash the GSI again,reboot to recovery, clear cache & dalvik now flash gapps and reboot. Skip the setup by not connecting to internet and then go to dev Settings and choose chrome in webview implementation
4. If gapps give an error: that's most probably because of it detecting 8.1 or 8.0 firmware. So after flashing the GSI, reboot to recovery again then flash Gapps
Addons-
2 .kl Files-
Place the two .kl files in /system/usr/keylayout
Overlays-PR1.zip
Flash for gestures get working
aosp-9.0_Pixel-theme.zip
Flash for Pixel Blue theme instead of Green
Digital Wellbeing App-
Download the Apk from the Addons folder,signup here- Digital Wellbeing Beta ,Install the apk and give it Usage Data Access Permission in App settings
Pixel launcher-
download the launcher apk from addons Folder, replace the quickstep.apk in /system/priv-app/quickstep with this one!
Thanks to @saxmydix for the zips
There is a known incompatibility with CSC PHN
What's the best way to correct the padding for our rounded screen?
For sure i have to root and install the twrp to flash this rom? Will **** the knox counter to flash this rom?
vuoshino said:
For sure i have to root and install the twrp to flash this rom? Will **** the knox counter to flash this rom?
Click to expand...
Click to collapse
Of course, it's a custom ROM
Just another OT sorry. But if I flash something when i will try to restore, the knox counter will be ****ed anyway? Is it right?
vuoshino said:
Just another OT sorry. But if I flash something when i will try to restore, the knox counter will be ****ed anyway? Is it right?
Click to expand...
Click to collapse
Yes, it's permanent
s3xxt0y said:
What's the best way to correct the padding for our rounded screen?
Click to expand...
Click to collapse
You should get correct rounded padding on second boot (you need to wait a minute after first boot)
Quick question, when you mean i have to be on a treble rom before that, does it have to be a Treble rom or a standard lineage would work?#
When I try to add a google account the screen just goes blank!
what's working and not working will be nice to see in the OP and gcam version if u can... this'll Clear all doubts of people
phhusson said:
You should get correct rounded padding on second boot (you need to wait a minute after first boot)
Click to expand...
Click to collapse
Awesome. Thanks mate, thanks for getting the GSI out so quickly too ?
Muntasir Mahmud Saif said:
what's working and not working will be nice to see in the OP and gcam version if u can... this'll Clear all doubts of people
Click to expand...
Click to collapse
I was unable to find anything about what's working and what isn't working?
Lags ... bixby button , home button unlock , google account attachment screen off , access point Not Work but the rom is so fast , so go back to stock
"I was unable to find anything about what's working and what isn't working?"
https://youtu.be/VfmzkIVSzu0
dokibull said:
"I was unable to find anything about what's working and what isn't working?"
https://youtu.be/VfmzkIVSzu0
Click to expand...
Click to collapse
Because it's a generic image
Bluetooth is broken
Which gapps did you guys flash?
OP has been Updated with "What work and what doesn't" and link to GCamera that I use!
MidnightDevil said:
Quick question, when you mean i have to be on a treble rom before that, does it have to be a Treble rom or a standard lineage would work?#
When I try to add a google account the screen just goes blank!
Click to expand...
Click to collapse
Just go to developers settings and in Webview Implementation select Chrome! Hope that helps!?
What's working:
Wi-Fi
Bluetooth
Mobile Network (Calling, Data, etc.)
Signal Strength
GPS
NFC
Audio (Stereo Speakers)
Camera
Fingerprint Sensor
HDMI
MTP
Call Recording
HWC
Encryption
SELinux Enforcing
OTA Updates
Bugs:
?
Notes:
If you are not on Q BL it will not boot.
I would suggest 3.2.3 TWRP or the included lineage recovery
For encryption to work make sure you are on 3.2.3 twrp and haven't formatted /data with any newer versions, issue described here.
Use a stock unmodified vendor and update whenever available, we are using our own fstab now for optional encryption and adoptable storage support so we don't need to touch the vendor.
If you go back to an official build after this with stock vendor, you will be force encrypted on first boot.
These builds are based on the official lineage device trees and kernel, but with more flexibility and my preferred configuration.
Lineage Recovery will be uploaded with each build and if you will only be running this rom i suggest to switch to it.
Instructions:
Make sure TWRP has been installed and is functional
Download the latest build and latest stock vendor.img that is available (optionally gapps and magisk if needed)
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs)
Flash the vendor image
Flash the latest build (then gapps and magisk if needed)
Reboot
How to update builds?
OTA or manually like below
Do not wipe anything unless stated in the changelog
Flash only the rom.zip and it will automatically reinstall your gapps, magisk etc
use /system/addon.d if you would like to keep system mods after an update
Downloads:
Lineage-17.1: (mega) https://mega.nz/#F!0McClQKJ!ic8c0LEYF3zGSo_Ivv1nSw
Lineage-17.1: (github) https://github.com/synt4x93/OTA/releases
Google Apps: https://opengapps.org/
Telegram Channel:
@godlike9810
Paypal:
synt4x.93
XDA:DevDB Information
LineageOS 17.1, ROM for the Samsung Galaxy S9/+
Contributors
Synt4x.93, Erfanoabdi
Source Code: https://github.com/synt4x93/
ROM OS Version: Android 10
ROM Kernel: Linux 4.9.226
ROM Firmware Required: Q BL / Q Vendor
Version Information
Status: Stable
Created: 01-04-2020
Last Updated: 05-06-2020
temp
Great ROM really smooth but only one issue i have is when i try to record the screen with internal sound (gaming) it will mute the sound from the speaker and it's working fine Evox (sorry for my bad English
Hello everyone! Not sure how many people here already been trying this ROM from the Telegram group, but was wondering if anyone has the following issue. Google Chrome seems to become really laggy in the evening hours on my phone, but is fine during the day. Basically scrolling and animations within Chrome are really slow causing bad performance. Wanted to confirm if it's just me as Rob said the issue doesn't seem to happen with the Note 9 and see if anyone here has any suggestions? I am running DTB4 BL and vendor with TWRP 3.2.3.0.
so everything good other than Android Auto? Well done!
Great news! Thanks a lot for keeping our device alive and updated!
Can't wait to try this one out. I assume it's working fine as a daily driver?
geronimoge said:
Great news! Thanks a lot for keeping our device alive and updated!
Can't wait to try this one out. I assume it's working fine as a daily driver?
Click to expand...
Click to collapse
Yup, been using it for several weeks. No odd reboots and stuff, just very stable.
How can I check for the right BL?
What does it mean "Q BL"?
Thanks
EDIT:
Never mind, I found it! :good:
..ok, stupid question, but where can I get q bl?
Do I need to use odin to flash just bl from one of q roms or is there just q bl to download somewhere?
Great rom, thanks for this, I came from the LOS 16 and LOS 17.1 of the 09/01 and all good until now
Here is a link for download q bootloader
https://mega.nz/#F!oFJ1nK5Z!eWD2AU4CQxWSdA_kxxRkHA
vendor images and bootloader zip are taken from devbase rom by alexndr so big thank for his work
current vendor version
S9/S9+ : DTB5
N9 : DTB6
Hoooly ****, I tried to make dirty flash from LOS 16(with replacing bl and vendor, of course), with just cache and dalvik cache wipe, and everything just WORKS fine.
This is AMAZING!
So:
1. twrp - wipe dalvik and cache,
2. twrp - flash bl,
3. twrp - flash vendor, but vendor from OP(!),
4. twrp - flash ROM,
5. twrp - flash opengapps.
Damn, it saved me reinstalling 132 apps, and setting all accounts all over.
What's great - all settings are kept from previous OS.
Of course, I lost viperfx and all magisk-related plugs(list of plugins is still there, so all I needed to do was reinstalling plugins ), but, still, this is great.
Great, glad all went good for you
Thanks for working instructions and links!
Thanks a lot! :victory:
I guess it's to much to ask for those information from a developer...
Side note: there is a boot loader for DTB5 only, but the modified vendor for LOS is DTB4. It works, though.
I did update from the 09/01/2020, so far found two issues:
1. After installing White Wolfs Kernel, UI seems to crash after unlocking via pattern, returning me back to unlock pattern. Had to wipe and re-install (dirty install of LOS didn't solve the issue ).
2. AFWall doesn't work. Applying rules fails leaving the system without internet access.
First one is not that important, but I'd like a firewall on my device...
Anyway: Thanks for the work on the LOS.
HackAR
DeCo59 said:
Here is a link for download q bootloader
https://mega.nz/#F!oFJ1nK5Z!eWD2AU4CQxWSdA_kxxRkHA
vendor images and bootloader zip are taken from devbase rom by alexndr so big thank for his work
current vendor version
S9/S9+ : DTB5
N9 : DTB6
Click to expand...
Click to collapse
xo.en said:
1. twrp - wipe dalvik and cache,
2. twrp - flash bl,
3. twrp - flash vendor, but vendor from OP(!),
4. twrp - flash ROM,
5. twrp - flash opengapps.
Click to expand...
Click to collapse
Great work! ROM works great, even Google pay is working good!
I just installed your ROM. It is very nice that the keyboard is now bigger then the one of theolder version and my new bluetooth headset is finally working.
Unfortunately, I cannot get ctsProfile to pass.
Does anyone have ctsProfile passing?
Edit: nevermind, should have read the docs of MagiskHide Props, the last module did the config automatically...
All the best,
Daniel
Hack_AR said:
After installing White Wolfs Kernel, UI seems to crash after unlocking via pattern, returning me back to unlock pattern. Had to wipe and re-install (dirty install of LOS didn't solve the issue ).
Click to expand...
Click to collapse
Same here, can’t unlock after installing White Wolf kernel. Furthermore, the phone is in Emergency calls only mode, as if there is no SIM card.
How to “undo” or otherwise solve this?
Hack_AR said:
2. AFWall doesn't work. Applying rules fails leaving the system without internet access.
First one is not that important, but I'd like a firewall on my device...
Anyway: Thanks for the work on the LOS.
Click to expand...
Click to collapse
I have the same problem. I'm still on LOS 16 as a daily driver because of this (and because of its awesome battery live). I will keep testing though...
Also my thanks for the great work on LOS!
oldipp said:
Same here, can’t unlock after installing White Wolf kernel. Furthermore, the phone is in Emergency calls only mode, as if there is no SIM card.
How to “undo” or otherwise solve this?
Click to expand...
Click to collapse
I had the problem that the first boot after upgrade went without problems (or PIN prompt in my case) but after that, when entering the correct PIN, the screen got black and then locked again. If I entered the wrong PIN, the phone told me so.
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Good luck,
Daniel
Speedmatze said:
I'm still on LOS 16 as a daily driver because of this
Click to expand...
Click to collapse
I didn't have the problem with the old 09/01/2020 version, so you ca try it, or wait for the fix
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
Weirdly enough, my system doesn't have this file. BUT, another try of White Wolfs kernel just worked. It seems this is an obsolete file, that some times is left behind confused and causes problems in the kernel.
Hofedan said:
I had the problem that the first boot after upgrade went without problems (or PIN prompt in my case) but after that, when entering the correct PIN, the screen got black and then locked again. If I entered the wrong PIN, the phone told me so.
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Good luck,
Daniel
Click to expand...
Click to collapse
Hofedan said:
My solution was to use TWRP to rename the file /data/system/locksettings.db to locksettings.db.bak and then reboot. By renaming the file, the screen lock was removed and I could reenable it in the settings.
Click to expand...
Click to collapse
It was too late for me to remove that file, because I had encrypted /data, was no longer able to access it from within LOS, and I don’t know if TWRP can decrypt /data. If it happens to you, I would suggest to seize the opportunity while LOS still unlocks on the first boot to delete that locksettings file. In any case, having a backup is a must, because I am not sure this will actually work.
i tried to flash project sakura 5.1 with latest twrp which shows succeeded on terminal but it doesn't boot into system instead it booted into bootloader. i tried with older twrp and older versions of project sakura too, nothing worked. but the another rom called HariRom based on oneUI3.1 successfully flashed and booted normally to system. also i tried with another custom recovery called orangefox, which shows the boot cannot be located as error for all version of project sakura. can somebody help me with it?? i wish to install project sakura 5.1
ChapagainAB said:
i tried to flash project sakura 5.1 with latest twrp which shows succeeded on terminal but it doesn't boot into system instead it booted into bootloader. i tried with older twrp and older versions of project sakura too, nothing worked. but the another rom called HariRom based on oneUI3.1 successfully flashed and booted normally to system. also i tried with another custom recovery called orangefox, which shows the boot cannot be located as error for all version of project sakura. can somebody help me with it?? i wish to install project sakura 5.1
Click to expand...
Click to collapse
[EOL][ROM] [11] Project Sakura 5.1 [OFFICIAL] | VANILLA
does this rom have a working aod for samsung galaxy a40?
forum.xda-developers.com
Follow from here
Kenora_I said:
[EOL][ROM] [11] Project Sakura 5.1 [OFFICIAL] | VANILLA
does this rom have a working aod for samsung galaxy a40?
forum.xda-developers.com
Follow from here
Click to expand...
Click to collapse
i followed that in my first try which didnt worked and after that i tried other recoveries and versions of sakura . that didnt helped.
my phone is not rooted by the way
How to fix bootloops after coming from OneUI 3.x ports
1) Boot to TWRP
2) Download this vendor image
3) Install --> Flash image --> select image --> select vendor
4) Flash Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip from here
5) Flash the ROM.zip
i did installed vendor img but didnt find the option to wipe vender. and also i have tried installing dm-verity zip too. idk what that did but it was installed successfully and still didnt booted to system
Kenora_I said:
How to fix bootloops after coming from OneUI 3.x ports
1) Boot to TWRP
2) Wipe Vendor
3) Download this vendor image
4) Install --> Flash image --> select image --> select vendor
5) Flash Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip from here
6) Flash the ROM.zip
Click to expand...
Click to collapse
Actually no need i removed it.
So wiping vendor is in advanced wipe area in twrp. Dont reboot after it.
Then flash the image like i said.
Then flash the dm verity thing then flash the rom.zip
Kenora_I said:
So wiping vendor is in advanced wipe area in twrp. Dont reboot after it.
Then flash the image like i said.
Then flash the dm verity thing then flash the rom.zip
Click to expand...
Click to collapse
@Haridhayal i did installed it to my phone. version 5.2 actually. but its lagging, its overheating than stock rom while gaming. And mainly it crashes whenever i try to add security lock neither of the security option works . and i played call of duty mobile for some time and it quit automatically after some like 10 to 15 min. also the camera UI is terrible altho it captured well. and my phone did support fast charging on stock rom which now doesnot supported by project sakura. it takes almost 4-5 hours to get fully charged. what the hell happened with that?
ChapagainAB said:
@Haridhayal i did installed it to my phone. version 5.2 actually. but its lagging, its overheating than stock rom while gaming. And mainly it crashes whenever i try to add security lock neither of the security option works . and i played call of duty mobile for some time and it quit automatically after some like 10 to 15 min. also the camera UI is terrible altho it captured well. and my phone did support fast charging on stock rom which now doesnot supported by project sakura. it takes almost 4-5 hours to get fully charged. what the hell happened with that?
Click to expand...
Click to collapse
So it worked? It booted?
Yes, some features arent supported for some custom ROMs. Keep in mind custom ROMS won't perform like stock. Stock ROMS are made by people with the correct tools and 100% knowledge about the specific phone you are using sooooo....
Hello everyone so I have a Samsung galaxy M21 with One UI 3.1 core. Are there any lineage OS official or unofficial builds for Android 11? If you know please reply to this, thank you in advance!!!
Join telegram
they have CrDroid android 11
sinkoo1979 said:
Join telegram
they have CrDroid android 11
Click to expand...
Click to collapse
Thanks so much I'll join the telegram channel.
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
GuruPrasadAH said:
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
Click to expand...
Click to collapse
Any GSI you will recommend? (for M215G)
OldNoobOne said:
Any GSI you will recommend? (for M215G)
Click to expand...
Click to collapse
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
GuruPrasadAH said:
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
Click to expand...
Click to collapse
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
OldNoobOne said:
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
Click to expand...
Click to collapse
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Bro thanks so much, I will try your steps and tell you what happens ok
GuruPrasadAH said:
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Click to expand...
Click to collapse
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
OldNoobOne said:
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
Click to expand...
Click to collapse
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
GuruPrasadAH said:
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
Click to expand...
Click to collapse
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
OldNoobOne said:
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
Click to expand...
Click to collapse
Just a few clarifications:
1. I only made the flasher zip for the vbmeta. The image itself - was provided by google.
2. This zip should and will probably work on all phones, except maybe a few with weird vbmeta partition name( samsung vbmeta partition name is actually vbmeta_samsung instead of vbmeta only, and I think LG does the same too).
If it does not work( shows failed msg ) then send me the link of that device's twrp. I will maybe make an update if i find time.
Chill
GuruPrasadAH
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
GuruPrasadAH said:
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
Click to expand...
Click to collapse
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
OldNoobOne said:
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
Click to expand...
Click to collapse
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
GuruPrasadAH said:
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
Click to expand...
Click to collapse
Thanks bro, t.me is crazy with bots monitoring everything. Its not very secure as per me coz it downloads unwanted things to our device. It feels like as if soviet kgb is watching every group we join LOL.
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Fredin_ said:
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Click to expand...
Click to collapse
Hi Fredin bro, long time ..how you been? Youre the most helpful nice guy in t.me
My Redmi Note 10 came with MiUi 12.5.1 Android 11 out of the box, in these two months that ive been using Nebrassy2-Twrp and its different than Soulr344-Twrp, (Soulr344-Twrp 'super ' command = Nebrassy2-Twrp '#su' command), I couldnt flash GSIs using ( TWRP-3.5.2-mojito-Nebrassy-2.img ) so far.
Ive requested Soulr344 dev to make Soulr344-Twrp for RN10 Mojito/Sunny. If he ever drops by XDA perhaps he might notice.
Hi guys, I'm here looking for any help
I'm having this weird behavior in any custom rom I flash.
A while after flashing some rom (some 2 or 3 cycles of battery, around 1 to 3 days) suddenly all apps start crashing, falling at that force close popup. I mean every app, when I try to launch some new app it goes to the force close immediately.
I can't take a screenshot because it fails, I can't take a screen record because it crashes.
So I have to reboot, and it boots normally, but already happened that some apps loose their cache/data, because they start from zero and I have to log in again.
Happening on any A13 build, I don't remember about A12.
Can that be a hardware issue? I doesn't happen on MIUI.
Tried PE+, LO, CrDroid, ArrowOS, CherishOS, Voltage, Spark... Well, I'm trying it all.
Tried changing recovery: Kewl TWRP, TWRP, OrangeFox
Tried leaving phone on LTE only.
Tried flash fastboot MIUI before other rom.
Flashing all of them like: wipes, install rom, format data.
Does anybody has any idea?
Thanks and sorry about my english!
Leonvrx said:
Hi guys, I'm here looking for any help
I'm having this weird behavior in any custom rom I flash.
A while after flashing some rom (some 2 or 3 cycles of battery, around 1 to 3 days) suddenly all apps start crashing, falling at that force close popup. I mean every app, when I try to launch some new app it goes to the force close immediately.
I can't take a screenshot because it fails, I can't take a screen record because it crashes.
So I have to reboot, and it boots normally, but already happened that some apps loose their cache/data, because they start from zero and I have to log in again.
Happening on any A13 build, I don't remember about A12.
Can that be a hardware issue? I doesn't happen on MIUI.
Tried PE+, LO, CrDroid, ArrowOS, CherishOS, Voltage, Spark... Well, I'm trying it all.
Tried changing recovery: Kewl TWRP, TWRP, OrangeFox
Tried leaving phone on LTE only.
Tried flash fastboot MIUI before other rom.
Flashing all of them like: wipes, install rom, format data.
Does anybody has any idea?
Thanks and sorry about my english!
Click to expand...
Click to collapse
Did you've formated DATA with yes and reboot recovery
Then flashed fw
and last the ROM?
I mean exactly like this?
Laptapper said:
Did you've formated DATA with yes and reboot recovery
Then flashed fw
and last the ROM?
I mean exactly like this?
Click to expand...
Click to collapse
No i've rebooted to the recovery, wiped, installed firmware, installed rom, formated data.
But would this order change anything even to roms that say that don't need any specific firmware?
Leonvrx said:
No i've rebooted to the recovery, wiped, installed firmware, installed rom, formated data.
But would this order change anything even to roms that say that don't need any specific firmware?
Click to expand...
Click to collapse
Wipe isn't enough, formating with yes is necessary.
Try exactly my procedure (fw isn't necessary for all roms / cherishos don't need, Los need)
Some ROMs installation instructions do not require an initial format of data before installation of the ROM itself, like EliteRom. Follow your ROM's installation instructions regarding required firmware. (MIUI)
Leonvrx said:
No i've rebooted to the recovery, wiped, installed firmware, installed rom, formated data.
But would this order change anything even to roms that say that don't need any specific firmware?
Click to expand...
Click to collapse
Sheist! said:
Some ROMs installation instructions do not require an initial format of data before installation of the ROM itself, like EliteRom. Follow your ROM's installation instructions regarding required firmware. (MIUI)
Click to expand...
Click to collapse
Also elite rom need format data if encrypted (normally data is encrypted!)
Leonvrx said:
No i've rebooted to the recovery, wiped, installed firmware, installed rom, formated data.
But would this order change anything even to roms that say that don't need any specific firmware?
Click to expand...
Click to collapse
If installing the EliteROM (for example), your formatting after installing the ROM is the correct procedure, per the declared instructions:
Installation Instructions:
- Install rom zip using TWRP/OFOX
- Format if you are encrypted, otherwise wipe data is enough
- Reboot
- Enjoy the smoothness+performance
Sheist! said:
If installing the EliteROM (for example), your formatting after installing the ROM is the correct procedure, per the declared instructions:
Installation Instructions:
- Install rom zip using TWRP/OFOX
- Format if you are encrypted, otherwise wipe data is enough
- Reboot
- Enjoy the smoothness+performance
Click to expand...
Click to collapse
@Leonvrx
according my experience it's not important if you format before ROM or after Rom installation but very important to restart recovery when you do it before ROM installation in encryption state.
If decrypted then only wiping data
Please feedback your trying and results.
Laptapper said:
@Leonvrx
according my experience it's not important if you format before ROM or after Rom installation but very important to restart recovery when you do it before ROM installation in encryption state.
If decrypted then only wiping data
Please feedback your trying and results.
Click to expand...
Click to collapse
I didn't know that; thank you for your help, guidance, and patience.
Tried your steps exactly this morning, so far so good, I'll update in the next days, for better or for worse.
@Laptapper
Yeah, same results, it crashed the same (using AlphaDroid atm).
I've rebooted it and it even started initial android setup again, after redoing it, i have all my apps like nothing happened, but my sound settings, fingerprint settings (and probably other too) reseted.
I've also already tried to remove the microSD expation slot, same results,
Tried Vanilla + NikGapps, Vanilla + BitGapps and Gapps builds.
I think it's just bad luck with this specific device :/
Leonvrx said:
@Laptapper
Yeah, same results, it crashed the same (using AlphaDroid atm).
I've rebooted it and it even started initial android setup again, after redoing it, i have all my apps like nothing happened, but my sound settings, fingerprint settings (and probably other too) reseted.
I've also already tried to remove the microSD expation slot, same results,
Tried Vanilla + NikGapps, Vanilla + BitGapps and Gapps builds.
I think it's just bad luck with this specific device :/
Click to expand...
Click to collapse
Which recovery?
Take this:
👍[SHARED] orange fox recovery with decryption for Android 12,13
Update post 9 with android 13 decryption support Here I'm sharing the nearly perfect recovery orange fox with implemented decryption for android 12 ( I've tested only pin protection) The main advantage comparing TWRP is the "beautiful" UI and...
forum.xda-developers.com
Try cherishos with exactly my procedure above. Fw isn't needed!
Laptapper said:
Which recovery?
Take this:
👍[SHARED] orange fox recovery with decryption for Android 12,13
Update post 9 with android 13 decryption support Here I'm sharing the nearly perfect recovery orange fox with implemented decryption for android 12 ( I've tested only pin protection) The main advantage comparing TWRP is the "beautiful" UI and...
forum.xda-developers.com
Try cherishos with exactly my procedure above. Fw isn't needed!
Click to expand...
Click to collapse
I think that it's exactly this version, but I will reflash to make sure and I'll try again
Leonvrx said:
I think that it's exactly this version, but I will reflash to make sure and I'll try again
Click to expand...
Click to collapse
If not working then try this:
In orange fox recovery
format data with manually typing yes
reboot recovery
install cherish gapps rom
format data/yes Again
Start system
Laptapper said:
If not working then try this:
In orange fox recovery
format data with manually typing yes
reboot recovery
install cherish gapps rom
format data/yes Again
Start system
Click to expand...
Click to collapse
Ok, I'll try if happens again. Sometimes it takes 2 or 3 days to happen.
But I have a problem in Cherish that on my bank app (C6 Bank Brazil) my facial recognition doesn't work. It stays on a black screen despite I had given camera permission.
Leonvrx said:
Ok, I'll try if happens again. Sometimes it takes 2 or 3 days to happen.
But I have a problem in Cherish that on my bank app (C6 Bank Brazil) my facial recognition doesn't work. It stays on a black screen despite I had given camera permission.
Click to expand...
Click to collapse
Playstore certified?
Rooted?
Cts matching?
Laptapper said:
Playstore certified?
Rooted?
Cts matching?
Click to expand...
Click to collapse
Non-rooted, CTS profile ok and certified.
It's a thing that just happen in this ROM.
Also this app is really annoying to hide root from, so I never root
Leonvrx said:
Non-rooted, CTS profile ok and certified.
It's a thing that just happen in this ROM.
Also this app is really annoying to hide root from, so I never root
Click to expand...
Click to collapse
Try kernelsu root
Then delete caches of playstore and Google play services.
Reboot
I've got non problems with banking and camera in cherish and kernelsu