Good evening. I unlocked the bootloader on my Moto X4 and started following the installation guide on LineageOS's website to install. Everything was going smoothly, I ran the copy-partitions script and proceeded with wiping data and sideloading LOS. That's where problems occured. ADB on my PC echoed "total xfer: 1.00", but LOS Recovery gave me this :
Error applying update: 7 (ErrorCode: :kInstallDeviceOpenError)
E: Error in /sideload/package.zip (status 1).
I have no clue how to solve this. I've attached my recovery log, if it helps. Any help to get LOS running will be very appreciated!!!
recovery.log
recovery.log payton - pastebin -for Sharing Code and Text.
recovery.log payton - pastebin Paste can store text, source code or sensitive data for a set period of time.
paste-bin.xyz
UPDATE: I got progress using TWRP, I successfully flashed the LineageOS zip, but I only got a bootloop. People say to change slots and try again, but I didn't have any luck with that either.
Whenever I got a boot loop, I went back in to recovery and performed a factory reset, after rebooting, things worked normally.
Related
Hi,
I have a problem with my Moto G 2014 XT1068 which is described in topic: forums.androidcentral.com/moto-g-2013/391289-something-seriously-wrong-my-moto-g.html#post3668518
I can't do these steps, because dialog window shows up all the time, and i cant go further.
I have disabled usb debugging option and can't disable ART runtime.
First of all "Factory" in bootloader doesn't work. Wipe and factory reset via stock recovery has no effect; old android remains, the same using TWRP:
"E:Unable to open 'cache/recovery/.version' but ends successfully
and PHilz.
I've tried to flash many roms using many recoveries( TWRP - few versions up to 2.8.5 because 2.8.6 has display flickering bug, few Philz, and few others that also flicker) and fastboot and msfastboot(both on linux).
When i flash via fastboot or mfastboot using xml.zip roms everything looks ok, there are no errors, but flashing has no effect - I have still old ROM with old issue.
When i flash via different recoveries always some errors appears. For example flashing latest CM 12.1 nightly
via TWRP i get:
"E:Error executing updater binary in zip '/sideload/package.zip'
or via stock recovery (ADB sideload) get:
"(...)
Verifying update package...
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted."
Partition erase in fastboot despite "OKAY" message in CLI has no effect. As i understand this should remove all files from partitions.
This problem showed up when i discharged battery to 0% and turned on the phone.
Have you any ideas what should i try more?
Thanks in advance.
Hi,
I've tried other things to back my phone to life, like turn on usb debugging or even delete files, all via adb shell in recovery, but it is impossible. In TWRP or PhilzTouch I remount partitions with rw privileges, it look like I'm able modifying files via vi and cat to check results but when remount one more time old files still exist, so it is like there is some buffer? (maybe some security lock?), when try rm -rf files it shows up that i can't delete because it read only... (but mount says rw). After remount partitions with rw privileges wipe /data in twrp ended successfully but has no effect.
Do you know why everything looks ok, but it is not? Of course android boots up but is useless and after few minutes phone turns off.
i have the exact same problem with xt1064 that shuts off after bootanimation, all flashing and wiping look ok, but stuck in same result.
i read in some threads it's due to corrupt partitions and there's no solution yet to this problem, i hope this is not true, please share if you make any progress, i will do the same. best of luck.
Sounds like you both have a failed eMMC. If that is the case, and I'm certain it is, there is nothing that can be done to "save" or "restore" your devices.
Sent from my XT1031
hi, maybe any1 has already found a solution?
dihcar said:
i have the exact same problem with xt1064 that shuts off after bootanimation, all flashing and wiping look ok, but stuck in same result.
i read in some threads it's due to corrupt partitions and there's no solution yet to this problem, i hope this is not true, please share if you make any progress, i will do the same. best of luck.
Click to expand...
Click to collapse
I have exactly the same issue with my XT1063. Reading a lot for a solution, traying all without success.
Hopping someone can help us!
Hi guys,
a couple days ago my Razr i stopped working. After a forced reboot it stucked at the intel logo an doesn't boot further (like http://forum.xda-developers.com/razr-i/help/wont-boot-stuck-intel-screen-t3162719). I tried several things I've read in this forum (and other sites) but with no success.
My original system was Android 4.4.2 build für RetailEU and I would love to have either this back or the CM11 from Hazou (http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855). Unfortunately I don't get this far.
I unlocked (successfully) my phone tried to replace the Recovery with TWRP (as described in Hazou's thread) but after a reboot I get the following error:
Code:
E:fail to write to /tmp/kernel
E:fail to create kernel file /tmp/kernel
failed to enter recovery mode, error code -1
The only Recovery I was able to install was CWM 6.0.1.9 but unfortunately this version doesn't allow me to install the CM11 as I get the error:
Code:
set_metadata_recursive: some changes failed
A change in the updater script as suggested here http://android.stackexchange.com/qu...et-set-metadata-recursive-some-changes-failed doesn't work either.
Any suggestions how I can get my phone back to live?
I downloaded the first Nightly from CyanogenMOD 14.1 today for Moto G 2014. But I could not install it and I do not know why.
I did all the right procedures ... Dei Wipe Data, Cache, Dav and System, but at the time of installation these two errors appear in red:
E: ERROR EXECUTING UPDATER BINARY IN ZIP
E: UKNOW MTP
Sometimes the following message appears (ERROR MTP MESSAGE TYPE 1)
I had never encountered these errors, I even thought I had done something wrong, but after several unsuccessful attempts, I decided to install RRemix and the installation occurred normally!
I downloaded CM 14.1 twice on the official website, checked everything and the file is not corrupted, apparently everything is ok!
I found something in a forum out there saying that I should upgrade my TWRP which is in version 2.8.6 to a newer one. But I had a problem with that, too. When I give the command by Minimal ADB, a message appears saying "Waiting for Device" and nothing happens.
Does anyone know what's going on? I need a solution as soon as possible!
Update twrp via twrp download img 3.0.2.1 to your phone then click install then img and then select the img select recovery and swipe to flash then reboot recovery
Gesendet von meinem Pixel mit Tapatalk
The "Waiting for Device" can be because you don't have Motorola Drivers or the USB cable is with any problem.
Try using another SD card to install. Got the same problem a time ago.
evandro_stan said:
Try using another SD card to install. Got the same problem a time ago.
Click to expand...
Click to collapse
Helped me dude
I have moto g 2014 XT1068
I tried to flash cm 14 to update to 7.1 nougat but every time the following screen appeared.
E: unknown command [log]
E: error executing updater binary in zip '/sdcard/cm 14.1-20161117-NIGHTLY-titan.zip'
What should I do.
I'm currently using cm 13.0
Hi,
I have a moto G7 plus on a bootloop after installing magisk 20.3.
It’s a XT1965-6 with a RETEU 29.98-111-9 ROM, after a clean boot I’ve installed TWRP (using twrp-installer-build-version-lake.zip) and boot into the system.
I then installed Magisk-v20.3.zip, but after the reboot the system keep bootlooping.
I can get it out with “Magisk-uninstaller-20200110.zip”
I’ve tried to get the log cat using “Logcat boot script” from https://www.didgeridoohan.com/magisk/MagiskHideHelp but I get no logfile.
I’ve made a new logcat.txt file and copied the code into it.
Used "adb push logcat.txt /data/adb/post-fs-data.d"
Then in twrp used the file manager to get to the file and “chmod 755”
Reboot the system, let it boot for 3 times and got back to TWRP.
I see no bootlog.log in /sdcard (or /data/media/0)
I even changed the sleep from 30 to 1, but still no log file.
How can I get the log?
Hello. Newbie here trying to install TWRP onto my G7+ (xt1965-T, moto not Revlry). I've been following the twrp.me instructions, among others. I've got the bootloader unlocked, adb & fastboot devices both return what they should, I've copied the twrp-3.5.0_9-0-lake IMG & ZIP files to my platform-tools folder and am running powershell from there. I copied the zip file to the internal memory of the phone as well as the ASC file with basic copy/paste commands in windows.
I temporarily boot the TWRP image and try to install the zip file, only to have it fail signature verification. I tried it without sig verification but still failed on some error. I've searched, but I haven't been able to find anything to get me past this.
Confusion comes with conflicting instructions. I see here that there is a method that differs from the instructions linked above, AFIAK.
There is a note on the bottom of the 1st instructions stating " If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest firmware for your device and reflash the boot image." I did ignorantly initially type the command fastboot flash recovery TWRPxxx.img. Would this have anything to do with my issues?
Are there multiple ways to achieve installation of TWRP & something like LineageOS and I'm just getting confused between instructions for each?
Thanks
I just tried to install the zip file without signature verification, and it failed to unpack the image
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/twrp-installer-3.5.0_9-0-lake.zip'
I've downloaded this a couple of times with the same result.
timsch75 said:
I just tried to install the zip file without signature verification, and it failed to unpack the image
Updater process ended with ERROR: 1
Error installing zip file '/external_sd/twrp-installer-3.5.0_9-0-lake.zip'
I've downloaded this a couple of times with the same result.
Click to expand...
Click to collapse
Did you go in to TWRP Advanced and try to sideload TWRP ?
timsch75 said:
Hello. Newbie here trying to install TWRP onto my G7+ (xt1965-T, moto not Revlry). I've been following the twrp.me instructions, among others. I've got the bootloader unlocked, adb & fastboot devices both return what they should, I've copied the twrp-3.5.0_9-0-lake IMG & ZIP files to my platform-tools folder and am running powershell from there. I copied the zip file to the internal memory of the phone as well as the ASC file with basic copy/paste commands in windows.
I temporarily boot the TWRP image and try to install the zip file, only to have it fail signature verification. I tried it without sig verification but still failed on some error. I've searched, but I haven't been able to find anything to get me past this.
Confusion comes with conflicting instructions. I see here that there is a method that differs from the instructions linked above, AFIAK.
There is a note on the bottom of the 1st instructions stating " If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest firmware for your device and reflash the boot image." I did ignorantly initially type the command fastboot flash recovery TWRPxxx.img. Would this have anything to do with my issues?
Are there multiple ways to achieve installation of TWRP & something like LineageOS and I'm just getting confused between instructions for each?
Thanks
Click to expand...
Click to collapse
I fought this same model G7+ (XT1965-T) for several days, trying to install LineageOS for microG. Here are the instructions I used here ....I used the same recovery image (twrp-3.5.0_9-0-lake .img) as you. Download the copy-partitions-20200903_1329.zip from here. To sideload copy-partitions zip in TWRP go to Advanced tab, ADB sideload tab, then I sideloaded lineage-17.1-20210202-microG-lake.zip here.
chuck8812 said:
I fought this same model G7+ (XT1965-T) for several days, trying to install LineageOS for microG. Here are the instructions I used here ....I used the same recovery image (twrp-3.5.0_9-0-lake .img) as you. Download the copy-partitions-20200903_1329.zip from here. To sideload copy-partitions zip in TWRP go to Advanced tab, ADB sideload tab, then I sideloaded lineage-17.1-20210202-microG-lake.zip here.
Click to expand...
Click to collapse
I've regressed. I had previously been ably to temporarily boot into TWRP with the fastboot boot x.img command, at least in windows, but for some reason now it hangs up and will not show the TWRP screen. I had this same issue in Linux, but it worked in Windows, but now it fails the same in both. I run the command above and it shows the typical splash screen that it would if booting the stock android system, but goes no further. Previously, it would flash this , but then go to the TWRP screen. I can't get any feedback from adding the verbose flag to the fastboot command. Any way to track down this problem?
effin 'ell I hate regressions, 'specially the ones that come out of nowhere.
p.s. I don't know what happened with the previous blank post. I was trying to reply in Windows, but it wouldn't let me enter text. I rebooted into Linux for this post, and I see that something got posted previously. I'd delete it if I could.... gremlins