i unlocked my bootloader long time ago and started to use custom roms it was fine for a while then everything went south
like now i cant use any custom rom all have bootloops only stock roms boot fine
(linageos 16 was fine now cant use it at all)
(lineageos 15.1 always boot loop)
(lineageos 14.1 always boot loop)
(pixel experience pie always bootloop)
(crDroid pie always bootloop)
all lineageos keep booting to recovery say it's corrupted system and ask for format but does'n nothing
and the bootloop takes like 3-5 mins then keep rebooting it doesn't take full time needed for 1st boot
any idea what i should do ??!
edit1: crDroid worked but it took alot of flash attempts to get it to boot up but if attempt to restart it get's boot loop the boot time is like 4-8 sec then reboot and so on !
Spoiler: KMSG_LOG
KMSG_LOG
Related
Device:
Xiaomi Mi 5 32gb (Not pro)
Rom: Cyanogenmod 13
After flashing CM, my phone was stuck in a bootloop. So I decided to do the standard wipe in TWRP, and then reflash CM. My phone is still stuck in the bootloop, and now TWRP won't load. I tried flashing a newer version of TWRP 3.0.2-1, but booting into recovery still gives me the same "loading page". What should I do?
Also, I made the noob mistake of making no backups.
Edit: TWRP is now loading, but I'm still stuck with CM bootloop.
TWRP 3.0.2.0 works fine for me. I also had problems with 3.0.2.1 no touch input possible
How did you get out of the TWRP boot loop? I'm in the same situation. Your help would be appreciated.
Sent from my MI 5 using XDA Free mobile app
Edit: I reflashed 3.0.2-0 using fastboot and now it works fine. Looks like Xiaomi.eu ROM automatically installs 3.0.2-1. Reflashing 2-0 can correct it. Somehow the recovery booting takes some time ... Don't panic.
Me too. I have problem with recovery for mi5.
I enter recovery but it said cannot mount data. I cannot install other rom.
Can yoy help me???
i had the same problem with cm13 and trwp 3.0.2.1
to leave the loop just press the on button long time and try to flash to trwp 3.0.2.0 in fastboot.
Over all i just was able to flash the ressurection rom. the cm13 i stoped after 35 minutes of loading.
Ressurection works fine for me.
hi all please hlep me ,i flash twrp and make backup and normal work twrp and after about 3 day i wanted make new backup and when go to boot twrp so only have freeze when loading twrp ( have main image from twrp) so i try download from g play twrp app and reflash twrp and always freeze twrp when loading thx all for say how to fix or im first with this BUG ?
How long have you waited for it to boot? If you are still on f2fs (default), it can take a VERY long time to boot!
It takes me at least a minute to boot into TWRP, I have 128gb..
If you wait it should load. It has a very long loading time
It takes a while because of encryption
There is supposedly 3.0.4, check it out
https://forum.xda-developers.com/on...ery-official-twrp-oneplus-3-3t-t3543391/page6
..
..
I've waited 10+ minutes, and still not booting into TWRP. There is definitely an issue with that. I even updated to 3.0.4 and waited the 10+ minutes. Nothing is happening.
restart and reboot into recovery and wait for 1 min max, it should work .. u only booted or flashed it?
I flashed 3.0.4. I've tried multiple times. It won't boot recovery.
What rom are you using?
What fs is on data?
Is data encrypted?
If so: is encryption passphrase secured?
If so: what method of passphrase are you using?
If passphrase secured: is twrp asking you for a password, or does it freeze before?
(General thought: it would be better to discuss this in the official thread. Since twrp images are unified, you find dev's thread in oneplus3 forum.)
need some advice on my new arrived 3T, i have unlocked the phone and installed TWRP and sultan's LineageOS 14.1
but the problem encountered now is, every time i reboot the stock recovery will show up twice and then boot logo
also i can't finish Sultan's update every time i boot into TWRP and flash with the zip, it shows up & run for a few second and returned into main page and nth happened.
I am thinking will all these because of the stock recovery? can i remove it? thx in advance.
How did you unlock the phone and flashed TWRP. Please explain every step to understand the problem because I have flashed the TWRP and installed the custom ROM many a time. I even reverted my phone back to stock completely to receive OTA. Recently two days back, I installed Zenity RR which is awesome and I did not face any issues.
Hello everyone,
I recently wanted to root my galaxy tab s2 and install a custom rom on it to enhance performance, someting i've done before with my old phone where everything worked fine. So i used autoroot to root the tablet which worked fine and choose to install lineageos afterwards. i found a fitting version of lineage on their official website, installed twrp on my tablet and used it to install lineageos and GApps. However i did not unlock my bootloader using adb since i didnt have to do that back when i rooted my phone and i read on a forum that unlocking oem in the developer settings would be enough. This is where the problems start. After i installed the custom rom the tablet would try to boot into the os for a couple of minutes only showing a loading animation just to boot straight into recovery mode afterwards. In an attempt to fix the error i used odin to install a stock rom from sammobile on the tablet. However now it doesnt even boot into recovery anymore. instead it only shows the stock rom loading animation until the battery emptys. Though i can enter download mode from that position and then cancel it in order to reboot the device which enables me to enter recovery mode. Does anyone have an idea how i could boot a normal os again or is the device hard bricked? The only idea i have left is trying to install a new os from an sd card.
I have the same issue. I installed unofficial lineageos 16 to exynos 2015 t810. I have newest odin and twrp. Im wondering if i need to install or unlock the bootloader to get past the logo loop then recovery bootup after 5 minutes. I followed clean tutorials.
Update: i found this to try.
Quote:
Originally Posted by -beluga-
Hi, first of all thanks for the ROM. Unfortunately I am unable to get my T710 running properly with today's packages (it ran 15.1 so far)
- lineage-16.0-20191009-UNOFFICIAL-gts28wifi.zip
- addonsu-16.0-arm-signed.zip
- open_gapps-arm-9.0-pico-20191009.zip (some with nano or stock)
I am doing a full clean install every time (over 10x so far) but only get it to boot using the ROM alone. Any mod, such as addonsu, gapps or even trwp app cause it to show the Lineage boot screen for quite a while until dropping back into TWRP. Since there is a virtually infinite amount of permutations which versions to try - can someone who is successfully installed 16.0 with Gapps on a T710 let me know their version combination please?
Thanks.
pico-20191009 is giving problems with the 1009 build on my T810 too. Pico-20191006 and Magisk 19.4 are doing the trick for me.
Don't know about other combinations
BTW, it's advised not to install the TWRP app as it is known for causing bootloops on this rom.
Don't know for sure, but wiping internal storage before installing rom might be useful too.
After device runs out of battery for the 2nd or 3rd time after rooting with magisk, the phone hangs on MIUI. I have waited 3 hours and the phone still is stuck on MIUI. WIping the data is required then the phone will boot. I am using orangefox addons magisk v24.3, if I use the patched image then I get fastboot loop or if I have custom recovery like unofficial twrp or unofficial orangefox then it will loop into it. After this wiping data sometimes does NOT work and I have to flash stock rom. Codename is rosemary.
Edit : Even unrooting and removing all magisk modules through /data/adb/modules and through adb will not work either and will simply still hang on MIUI
averagexiaomiuser said:
After device runs out of battery for the 2nd or 3rd time after rooting with magisk, the phone hangs on MIUI. I have waited 3 hours and the phone still is stuck on MIUI. WIping the data is required then the phone will boot. I am using orangefox addons magisk v24.3, if I use the patched image then I get fastboot loop or if I have custom recovery like unofficial twrp or unofficial orangefox then it will loop into it. After this wiping data sometimes does NOT work and I have to flash stock rom. Codename is rosemary.
Edit : Even unrooting and removing all magisk modules through /data/adb/modules and through adb will not work either and will simply still hang on MIUI
Click to expand...
Click to collapse
Fastboot stock rom
https://xiaomirom.com/en/rom/redmi-note-10s-rosemary-europe-fastboot-recovery-rom/
Tool:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/