Related
my moto droid will crash and reboot if i insert my kernel module
is there a way to check the kernel oops information ?
before the rebooting or after
what i mean is, can I check the kernel log messages which is printed out by dmsg command from /proc/dmesg AFTER A KERNEL CRASH.
or I just lose everything?
on nexus one devices, the ram_console driver will print the crashed log to /proc/last_kmsg, and you can dump it out from next successful boot.
anything similar on Droid?
thanks
Hi,
i installed today FXP-cm-12-20141230-UNOFFICIAL-z3c.zip on my Sony xperia z3 Compact.
I used adb sideload to install the .zip cause SDCard didn't work.
Lollipop apps run in general after killing the Launcher3.
But this are the blocking issues from using this Image productive:
- Cellular working for data - but dialing app cuts the connection by calling.
- Camera isn't Working.
Also Google contacts app isn't working.
I'll update the phone as a new version releases and the Github commits mention this issues.
https://github.com/CyanogenMod/android_device_sony_z3c/commits/cm-12.0
<<<<<<<<<<<<<<<<<< >>>>>>>>>>>>>>>>>>>>>
New : Get "Hijack Suite"
Hijack most of the device identities!!
<<<<<<<<<<<<<<<<<< >>>>>>>>>>>>>>>>>>>>>
Update v2.0 :
> Stable on Nougat.
> Bug fixes.
> In Oreo it will feed apps with random Serial numbers. (Limited support.)
Mask your device Serial number. Change Serial number to any no of your choice!
* ROOT ACCESS IS REQUIRED
* XPOSED FRAMEWORK should be installed. (minversion : 30)
Watch a quick demo : https://www.youtube.com/watch?v=giLXEzhDGwQ
Download Here : http://repo.xposed.info/module/com.intplus.idchanger
Use this module to mask your device Serial number.
A unique number will be assigned to very device by the manufacturer. This id is known as Serial number. You can check your device Serial number by navigating to Settings -> About the phone -> Phone Status.
Note : Similarly, a unique number is assigned to SIM slot it is known as IMEI number.
The app is NOT GOING TO CHANGE THE ID PERMANENTLY. It just masks the actual id for apps. (Spoof). Uninstall the app and reboot again to revert back to the original Serial Id.
You can enter your own serial number!, device is going to return this number when accessed for Serial number.
How to use ?
- As mentioned earlier you need to have a ROOTED device and XPOSED framework installed in it.
- Enable this app inside XPOSED installer.
- Open the app, Enter your own serial number.
- Save
- Reboot the device to apply the changes
Disclaimer :
May not work proper on some devices.
It should be used only for good purpose.
Please do not use if masking device id is not legal in your country.
It would be helpful tool for ethical hackers, mobile security researchers.
(Penetration testing android apps. )
Use this module at your own risk.
Thanks to rovo89 for developing the wonderful XPOSED framework.
working in lg l'bello
Good joob, working great in l'bello
Any planned futures
Is there is way to change IMEI and a way to change Wi-Fi MAC address
Thank you for the support!
I'm really excited add more features
Let me know all your feature ideas...
shs94 said:
Thank you for the support!
I'm really excited add more features
Let me know all your feature ideas...
Click to expand...
Click to collapse
@shs94 can you please add a way to change wifi mac
Thank you in advance
Zak1997 said:
@shs94 can you please add a way to change wifi mac
Thank you in advance
Click to expand...
Click to collapse
Yes, I have already started working.
Thank you
Update :
Please find new features on the below app
https://play.google.com/store/apps/details?id=com.intplus.hijackid
Let me know if you have any issues/concerns.
Works fine on my Shield Tablet 32 LTE (Marshmallow).
I've been Waiting for your update good joob bro:good:
Hope you add more futures
Many thanks bro...module very useful..you rock man
OZH3NN said:
Works fine on my Shield Tablet 32 LTE (Marshmallow).
Click to expand...
Click to collapse
Hi, so you have the Y01 battery. Did you still have to delete the tegra-ota.apk? Or can you just update it ota?
Hi, how "device info" app by jphilli85 (you can find it on play market, I can't use urls) and some others apps find original serial number, can you fix it?
arturs678 said:
Hi, how "device info" app by jphilli85 (you can find it on play market, I can't use urls) and some others apps find original serial number, can you fix it?
Click to expand...
Click to collapse
Hi arturs678,
Thanks for reporting. Ill check and try to fix in this weekend.
They seem to be using one of the hidden APIs, SystemProperties, for finding the device Serial number.
Even though it is hidden, it can be used with the Java Reflection concept. Compiler won't come to know that you are using a hidden class.
I'm trying to figure out how I can use Xposed and block the access...
Any help is appreciated.
your app version does not compatible with my 4.0.4 ics device Getting error messege during install (there 's parsing problem ) can u please help me i hv rooted and exposed framework installed can i change serialno in /sys/class/android_sub/android0/iserial manully??? Does it work? Or suggest something else please i ll waiting ur respons
Sent from my HEDY_H706 using XDA Free mobile app
aaaampopo1 said:
your app version does not compatible with my 4.0.4 ics device Getting error messege during install (there 's parsing problem ) can u please help me i hv rooted and exposed framework installed can i change serialno in /sys/class/android_sub/android0/iserial manully??? Does it work? Or suggest something else please i ll waiting ur respons
Sent from my HEDY_H706 using XDA Free mobile app
Click to expand...
Click to collapse
Hi,
Thanks for reporting the bug. Ill check it out.
And this app is going to modify the original Serial number of the device. It just masks on the fly.
If u want to change the value in iSerial file, then this app is not going to help.
One alternative suggestion is, u may make use of adb tool.
pull the /sys/class/android_usb/android0/iserial file, modify and push it back.:good:
I think this would revert back when device is rebooted.
My pc does not detecting my device its continuously connecting and disconecting while i hv already installed all necessory drivers in my pc manually as well as using pdanet but problem still exist?
May i use terminal emulator in the place of pc?if yes so what command do i use?
Sent from my HEDY_H706 using XDA Free mobile app
aaaampopo1 said:
My pc does not detecting my device its continuously connecting and disconecting while i hv already installed all necessory drivers in my pc manually as well as using pdanet but problem still exist?
May i use terminal emulator in the place of pc?if yes so what command do i use?
Sent from my HEDY_H706 using XDA Free mobile app
Click to expand...
Click to collapse
Try using 'AdbDriverInstaller'. It will help you install the right drivers
shs94 said:
Update v1.2 :
- New feature! An option to randomise Android device serial number on each access.
- Support for older devices
Mask your device Serial number. Change Serial number to any no of your choice!
* ROOT ACCESS IS REQUIRED
* XPOSED FRAMEWORK should be installed. (minversion : 30)
Watch a quick demo : https://www.youtube.com/watch?v=giLXEzhDGwQ
Download Here : http://repo.xposed.info/module/com.intplus.idchanger
Use this module to mask your device Serial number.
A unique number will be assigned to very device by the manufacturer. This id is known as Serial number. You can check your device Serial number by navigating to Settings -> About the phone -> Phone Status.
Note : Similarly, a unique number is assigned to SIM slot it is known as IMEI number.
The app is NOT GOING TO CHANGE THE ID PERMANENTLY. It just masks the actual id for apps. (Spoof). Uninstall the app and reboot again to revert back to the original Serial Id.
You can enter your own serial number!, device is going to return this number when accessed for Serial number.
How to use ?
- As mentioned earlier you need to have a ROOTED device and XPOSED framework installed in it.
- Enable this app inside XPOSED installer.
- Open the app, Enter your own serial number.
- Save
- Reboot the device to apply the changes
Disclaimer :
May not work proper on some devices.
It should be used only for good purpose.
Please do not use if masking device id is not legal in your country.
It would be helpful tool for ethical hackers, mobile security researchers.
(Penetration testing android apps. )
Use this module at your own risk.
Thanks to rovo89 for developing the wonderful XPOSED framework.
Click to expand...
Click to collapse
Hi Friend,
After reset to factory defaults, the original serial number coming back, is this normal.
I also tested adb push amended iSerial document to device, but is say " Permission denied"
Its not working on my MTK6592 Device with Android 4.4 (Blackview Zeta)
Dont know if its because of MTK.. xprivacy for example is working fine on that device.
No Errors nothing but DeviceID Apps show old Serial
Yes module in xposed activated
Aspergillus said:
Its not working on my MTK6592 Device with Android 4.4 (Blackview Zeta)
Dont know if its because of MTK.. xprivacy for example is working fine on that device.
No Errors nothing but DeviceID Apps show old Serial
Yes module in xposed activated
Click to expand...
Click to collapse
Hi Aspergillus,
Yes, you are right. I came to know that it doesn't work properly on KitKat devices.
I have added this task to my To-Do list. Hopefully Ill be able to fix it soon and release the next version.
So what does everyone use this app for? Im always looking for ways to show off the power of android.
Warning: Don't install an older OS on top of a newer one, you may have a very high chance of bricking your phone. If you are ready to take risk of bricking for the sake downgrading / requirement or already bricked, then only attempt the following . you need an autoloader & build version exactly matching to your phone.
I have downgraded successfully from Build ABP244 (Android 8.1.0) to AAX862 ( Android 7.1.1)
Caution: Blackberry/Google may introduce any constraints against downgrade through future OTA updates to strengthen the security etc.
My Phone Details:
BlackBerry, Keyone, Special Edition, Dual Sim, India.
PRD: PRD-63764-001 (Group: KEYone BBB100-7)
OS Build: ABP244 (Android 8.1.0)
[Upgrade history from ABB216 (android 7.1.1) to ABG076 (Android 8.1.0 ) ….to…to ABP244(Android 8.1.0 )]
1. I have checked phone PRD, by typing the following code into the phone dialer:
*#2886#
Clicked on "MANU"
Clicked on "Traceability"
There you can see phone's manufacturer no: Mine is PRD-63764-007 (for example) (photo#1 in attachment)
Exited from the menu click "PASS"
Then again clicked "PASS"
At the end of the menu clicked "exit"
2. compared with PRDs master at https://tclota.birth-online.de/ and download suitable Autoloader (ROM and its flasher)
3. AAX862 (it is written as AAX863 but actually AAX862) which is suitable to above PRD No is downloaded from
https://androidfilehost.com/?fid=890129502657599708
Topic: https://forums.crackberry.com/blackberry-keyone-f445/blackberry-keyone-autoloaders-1108372/
4. Removed passwords /patterns / finger prints from screen lock (settings>security>screen lock>select none), Removed google account [ settings>Users & Accounts (or Accounts in case of android 7.1.1 ) >googel>options>Remove, remove google]
[removed find my device at device administrator , find from Google Account (settings> google> google account >options (3 horizontal line at rhs bottom)>manage devices>black berry keyone>remove>remove- i have done but this may not be needed]
Theory: On BlackBerry devices powered by Android, Factory Reset Protection (FRP) is enabled by default to reduce the value of a stolen device. This feature prevents the use of a BlackBerry device powered by Android unless authorized by the known user.
Once you sign in with a Google account, FRP is enabled. Once enabled, only users who have reset their device via Settings > Backup & reset > Factory data reset may proceed through the setup wizard without being prompted to enter the Google login information that was previously used on the device before resetting. This form of reset is the only reset flow that is considered trusted.)
[I have reset the device from Android (I have done, but this may not be needed]
[Enabled Developer options and usb debugging was made on (I have done, but this may not be needed)]
5. Rebooted to fastboot mode by switching off >pressed and held volume down button and simultaneously , pressed power button till the phone restarts , then released volume down, once fastboot loads
[>select fastboot by pressing volume button , I have done, but this may not be needed (no further power button press)]
(photo#2 in attachment)
6. Installed BlackBerry-USBDrivers-5.0.0.2 downloaded from the link below for windows and restarted the windows.
Downloaded from https://swdownloads.blackberry.com/Downloads/entry.do?code=4EE0932F46276313B51570F46266A608
7. Connected it to Windows PC through USB port (Windows device manager photo#3 in attachment)
8. Extracted AAX862Universal.7z with 7z
9. Browsed to the above extracted folder, double clicked on file flashall.bat to run batch file (other option available is flashallnowipe.bat ).
10. Entered y in response to question …….. to continue (y/n), (photo#4 in attachment)
it immediately rebooted to fastboot again (photo#5 in attachment) but the process was going smooth.
Process successfully completed (photo#6 in attachment) and phone is rebooted to OS in Auto
Sometimes, the phone can get stuck when booting for the first time. If this happens to you, make sure you've waited long enough, and then just hold the power button down to force a reboot.
It needs simcard or internet to reach user interface.
Caution:
When Autoloader build no AAY819 (common/universal to many PRDs but not all) downloaded from https://mega.nz/#!wVxBxYZA!BahovAZA_...M5Ic_QkJigS3LI and flashed, flashing is successful but when is updated from App Drawer >updates…22 mb downloaded , install started , rebooted and installed to 100% but message appeared that “ This is embarrassing, the update failed, try to install again later, your phone will reboot after 120 sec…. Error code 3305” , It reboots and build no shows as ABB216 but 2nd Sim is not working.
Reflashed with Build No AAX862, both sims and other hardware are working normal , Further when update option is used it is getting updated to ABB216 without any error again both sims and other hardware are working normal .
Stop updates
(this facility not available in Oreo)
Pre requisite : disconnect phone from Internet (Put off Wifi and mobile data)
1). App drawer>Updates>Options(3 vertical dots)>settings>system> check for updates –Off (=never), Automatically download – off (=ask to download)
2). App drawer>Updates>Options(3 vertical dots)>settings>System applications > Automatically update –off (=never), new app notifications –off
If system update already started or pre -requisite is forgot: Go to Settings>Apps>Updates>Storage>clear data , now repeat step 1 & 2
Advantages:
1) The feel, the look , the smoothness , the speed , low in bugs of the build ABB216. It is excellent
2) “True phone dialer & contacts” app has all most all the features, you ask it has already has, like blue mark for outgoing calls, green for incoming, saffron for canceled, red for missed call as history (it cannot work properly with Oreo latest due to restriction on call log, restrictions increased in ascending order from Build ABG076 to ABJ879 to ABM376 to ABP244 ). Never hangs while calling (OS).It has contact share through SMS with pleasant interface, excellent dual sim management etc.
3) SMS Organizer by Microsoft also appears to be facing restrictions with Android 8.1.1 , hence it will be working excellently.
4) Rear camera (of Build ABB216)a lot nearer to true to actual ( than Oreo Build ABG076)
5) Light Manager works flawless with very low power consumption for customization of notification LED as keyone has no built in facility to customize.
Disadvantages:
1) less secured than Oreo,
2) 7.1.1 Camera not far better than improved camera by build ABP244.
3) Oreo has configurable alarms but same is achieved in Nougat with updating of Time App
4) Oreo has PIP useful e.g. for maps
5) Google playstore installs regular patches without our control making older android slow
6) call history symbols are rarely used and minor , further they can be seen at stock phone (the issue still exist with Oreo compatible TruePhone v1.78) advantage 2 may be considered almost nullified
7) file Explorer scrolling goes back if some shaking taking place.
8) Download is interrupted few times from playstore even when Download from mobile data
9) usb data transfer is slow
10) all features of Silence premium do not disturb app are not working ( my favourite profiles app ) like whitelist and repeat calls will enable ring, interruptions to silence mode (app is defective up to v 2.15f ) but they have created v2.17 which works as designed but does not install on nougat.
11) Light flow can be installed in place of Light Manager on Oreo , hence advantage 5 nullified
However I am happy with downgrade and will maintain as long as possible or till I get apps to get the nougat like flexibility and user experience as per above mentioned facts at advantages.
Thanks to the respective contributors& community. This is only experience sharing , no credit or responsibility.
As the time progressed, disadvantages increased and advantages reduced . I have re-upgraded please on 22.12.19 especially due to functional requirement of Silence Premium as mentioned above and no equivalent is available.
@knreddy, good work, please do you know if this exact firmware will work on the sprint variant of the keyone?
Hi all:
Here is a LineageOS 19.0 ALPHA ROM for Z5 compact (suzuran).
Download 2022-03-12
This is a 7z archive with the zip'ed ROM and the md5 file in it. Please unpack this archive, copy the included two files somewhere to your device, reboot into TWRP and flash this zip file. Enable md5sum checking.
Kernel sources
Tree sources
Features:
OS Version: 12 (S)
Kernel: Linux 3.10
Kernel 3.10.108
New: Android security patch level: 5 February 2022
Using Sony blob's from stock version 32.4.A.1.54
Important informations:
You should be familiar with general installation of custom ROMs.
Required for installation: TWRP 3.2.1 (pick the version from 2018-02-23!!!)
OR use my self built TWRP-version 3.6.0!
This ROM needs a clean install, old /data may cause problems!
This ROM is NOT pre-rooted. For rooting you can use Magisk.
Working:
Audio
Bluetooth
Fingerprint
FM-Radio (maybe it needs a few restarts before it's working)
German App AusweisApp2 (needs extended length NFC data; default in LineageOS 19.0)
LiveDisplay
Location services (see screenshot)
NFC
Notifications
Notification LED
Offline charging
Phone calls
Reboot into recovery and bootloader
Sensors
SMS
Sounds
WiFi
Please tell me...
Please keep in mind: This is an early ALPHA version and in permanent development status.
These things are NOT working (or badly working):
Camera
Encryption
Payment
Streaming (mirroring)
Maybe some more things are not working.
Use this ROM at your own risk! It comes without any warranty! I'm not responsible for any damage! If you don't agree with that, don't try to flash this ROM in any way.
Benefits:
Added F-Droid and UnifiedNLP! If you don't want this, simply de-install it.
I've set maximum speaker volume to a higher value.
I've increased microphone gain.
I've changed the microfone gain to avoid echo in phone calls.
Changelog
Troubleshooting:
If you're running into an error, please search in this thread if this error is already posted, before you post it again!
If not, I need a LOG to see what went wrong. Without a LOG I can't help you!
A LOG can be fetched by connecting the device with an USB cable to your PC and then by typing these commands line by line:
Code:
adb root
adb shell logcat -b all -d > logcat
Send my this LOG file via PM.
If you think this could be a SELinux related issue, please try to set the device to permissive mode first.
If the issue is gone, I need the policy file too (plus LOG). Fetch it by typing this line in a terminal:
Code:
adb pull /sys/fs/selinux/policy
If you stuck in a bootloop you can fetch a LOG with this trick:
Press the power button and the volume up button together until the device shuts down.
HOLD the power button.
Release the volume up button and press the volume down button immediately after releasing the volmue up button.
The device should start into TWRP recovery.
Tap on "Advanced", then on "Terminal" and enter these commands line by line:
Code:
cd sys/fs/pstore
cp * /sdcard
Send me the copied file(s), if any, via PM.
One last request:
Please, do not ask about problems for which my ROM is not responsible.
From now on I will only react to problems that I can reproduce and that are caused by my ROM.
I'm sorry for that, but I'm developing this ROM in my spare time and I still have a normal life.
The SIM card recognition works now; please stay tuned.
Currently I'm fighting with a crash loop while trying to enter SIM PIN.
Seems this is going to be a longer fight...
Berni-0815 said:
Currently I'm fighting with a crash loop while trying to enter SIM PIN.
Seems this is going to be a longer fight...
Click to expand...
Click to collapse
Hello Berni
For a short time, I tried rom with a spare device.
I also installed NikGapps.
First, it doesn't recognize the sim.
I tried rebooting several times, but it doesn't recognize it.
Also, I can't move the app icon.
The safety net was fine with Magisk.
Please do its best.
I haven't uploaded my latest changes because they are too unstable!
norabitox said:
I can't move the app icon
Click to expand...
Click to collapse
That's not a bug, that's a feature!
Long-press on an empty part of the screen and tab on "Home settings" and switch the first switch ("Lock layout") to the "on" position.
The logic behind this feature is reverse, so don't wonder.
Berni-0815 said:
That's not a bug, that's a feature!
Click to expand...
Click to collapse
Is that so
Thank you
New version out; see 1st post.
Now working:
Phone calls
SMS
WiFi
FM-Radio (maybe it needs a few restarts before it's working)
LiveDisplay
Offline charging
Notification LED
I could flash your android 12 version. recovery is changed to stock recovery, I reflashed twrp.
Welcome Screen was flickered, after 2 reboots I could create my profile on my z5 compact.
I had a lot of crashed on homescreen.
Call and sms are working.
Weird! I don't have any crashes! Could you please grab and send LOGs?
good work, does gapps work?
Thanks will try out this rom after awhile
Please don't forget: This is a very early ALPHA version! Don't expect any miracle!
And if possible, grab LOGs and search them for fatal errors (" F " <- a blank, a capital letter F and a blank) and for messages like "dlopen failed: cannot locate symbol".
I'm using "grep" for that:
Git:
grep " F " logcat > logcat.fatal
grep "dlopen failed: cannot locate symbol" logcat > logcat.symbol
...or like that...
Hi! Could you port this rom on sony Z5 premium?
I'm only building for suzuran (Z5 compact E5803, E5823)!
Please ask @Joel16 for further assistance.
He's the maintainer for Z5 premium.
Berni-0815 said:
I'm only building for suzuran (Z5 compact E5803, E5823)!
Please ask @Joel16 for further assistance.
He's the maintainer for Z5 premium.
Click to expand...
Click to collapse
Ok THX!
arpias said:
Ok THX!
Click to expand...
Click to collapse
Just an FYI until it gets into more of a 'beta' phase I won't be building android 19 for Z5P.
Joel16 said:
Just an FYI until it gets into more of a 'beta' phase I won't be building android 19 for Z5P.
Click to expand...
Click to collapse
Ok Joel, i'll wait for it, THX in advance!
New version out; see 1st post.
Android security patch level: 5 January 2022
Stability improvements: Removed IMS and VoLTE stuff due to too much weird errors.
New version out; see 1st post.
Sensors now working