Hi,
Sequence of steps:
1. Extracted the boot.img from payload.bin and flashed it to the phone. At this point I was able to get into Fastboot
2. While in Fastboot I went into advanced and wiped the "System Settings", and that's when the trouble started - now the phone is stuck into a boot loop forever, I do however get the options to "Power Off" and "Restart"
3. But none of the options above in Step 2 is able to bring me back to Fastboot (and hence into fastbootd either)
Question: How can I get the phone into Fastboot Mode - have tried MSM Tool v4 as well, but that doesn't even recognize the phone
Edit - This seems to have been resolved now, think I had to press Vol Down + Power instead of Vol Up + Power
Was able to enter into Fastbootd as well, will try to proceed with unbricking the phone with a fresh mind tomorrow
FYI for others reading I was able to install magisk by booting the patched file (dump the payload using the python script mentioned above). Running the command Fastboot boot filename boots into the operating system and then magisk can be installed using the direct method.
I assume running this command the phone doesn't actually flash the boot image but could be wrong
VoltaGe86 said:
FYI for others reading I was able to install magisk by booting the patched file (dump the payload using the python script mentioned above). Running the command Fastboot boot filename boots into the operating system and then magisk can be installed using the direct method.
I assume running this command the phone doesn't actually flash the boot image but could be wrong
Click to expand...
Click to collapse
Thats right, "fastboot boot <file_name>" loads temporarily your custom recovery of choice. After rebooting your phone, the custome recovery is gone.
Otherwise, the command "fastboot flash <file_name> recovery" flashs permamently your custom recovery of choice to your device.
Hi I have a oneplus 8t and I tried flashing a payload.bin file using fastboot enhanced. after the operation completed I tried to reboot but the phone only shows the logo and then the bootloader unlocked warning message and then turns off briefly, then it does it again and the screen goes black. When connected to the PC, the PC recognizes the devices as android adb recovery devices but i can't do anything from there. Tried the volume up+power combo and it just does the same thing. tried the volume down+power combo and absolutely nothing happens. If i could at least get to the bootloader I could unbrick it but I just can't get there. Any advice
Zekedw said:
Hi I have a oneplus 8t and I tried flashing a payload.bin file using fastboot enhanced. after the operation completed I tried to reboot but the phone only shows the logo and then the bootloader unlocked warning message and then turns off briefly, then it does it again and the screen goes black. When connected to the PC, the PC recognizes the devices as android adb recovery devices but i can't do anything from there. Tried the volume up+power combo and it just does the same thing. tried the volume down+power combo and absolutely nothing happens. If i could at least get to the bootloader I could unbrick it but I just can't get there. Any advice
Click to expand...
Click to collapse
I have exactly the same issue, on a nord 2
How about vol+/vol-&power all together? When stuck that gives me some screen that allows start, recovery (the one where you can enter advanced settings I expect from your description) and bootloader booting.
Related
I have a S7 that is an X rev and it only has one camera on it and it has a different ID than the current streak 7s, so I can't apply the update that tmobile put out.
So I rooted the S7 and ran ROM MANAGER and it insists that the clockworkmod is installed correctly, but I can't reboot into recovery from that program (I don't think it works on s7 anyway) nor can I do it with the volume+ and power. (All that does is to boot into android)
The fastboot seems to work fine, so is there a way that I can push one of the .ZIP file ROMs using fastboot? I was thinking the "Dell Streak 2.2.2 update with FULL ROOT" would be a good one to try, but there are many .img files in the zip file and when I try fastboot update, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I know that the following lines will work, but there isn't a system.img in the .zip file.
$fastboot flash boot boot.img
$fastboot flash recovery recovery.img
$fastboot flash system system.img
Thanks
Maj
You cant use regular fastboot commands its something like "fastboot -l 0413e blah blah search my threads for "how to flash stock img. " at the bottom of first post you will see fastboot help link
Sent from my Dell Streak 7 using XDA Premium App
http://forum.xda-developers.com/showpost.php?p=11929063&postcount=23
Sent from my Dell Streak 7 using XDA Premium App
Hey thatruth I've never used fastboot -iowhatever. All my fastboot cmds are fastboot (cmd) (dir) (file). Op so when holding +volume and power it doesn't put you in the bootloader? Your device may not work with cwr. Being a X device. And op are you using ubuntu/linux?
Sent from a signal
to get into cwr you have to hold vol and power. Then at the android menu select option 2 update.pkg. it will then boot into recovery
you can also reboot into recovery via adb
adb reboot recovery
graffixnyc said:
to get into cwr you have to hold vol and power. Then at the android menu select option 2 update.pkg. it will then boot into recovery
you can also reboot into recovery via adb
adb reboot recovery
Click to expand...
Click to collapse
I have not found a way to get into recovery. Using adb, fastboot, reboot into recovery options, and attempting vol+ and power, just boots straight into android. It says "cold-booting linux" and boots into android. It seems as if there isn't a real partition to do that, so I somehow need to dump an image onto the s7 so that it will have all of these partitions.
I have a Droid Incredible in which I've hacked to death, so I know how to get into the other menus, they just don't appear to be there or accessible for some reason.
Hellzya said:
Hey thatruth I've never used fastboot -iowhatever. All my fastboot cmds are fastboot (cmd) (dir) (file). Op so when holding +volume and power it doesn't put you in the bootloader? Your device may not work with cwr. Being a X device. And op are you using ubuntu/linux?
Sent from a signal
Click to expand...
Click to collapse
Yah, the +volume and power just boots the phone right into android. ROM Manager tells me that my rooted s7 installs cwr just fine. (in fact I've tried every different version it offers) I use w7 x64.
MajikUF said:
Yah, the +volume and power just boots the phone right into android. ROM Manager tells me that my rooted s7 installs cwr just fine. (in fact I've tried every different version it offers) I use w7 x64.
Click to expand...
Click to collapse
did you try flash cwm through fastboot yet?
http://www.4shared.com/file/l2JpliG6/recovery-clockwork-3019-streak.html
use this to download cwm recovery img
jiwengang said:
did you try flash cwm through fastboot yet?
http://www.4shared.com/file/l2JpliG6/recovery-clockwork-3019-streak.html
use this to download cwm recovery img
Click to expand...
Click to collapse
Assuming that's the same cwm that I got in the streaksmart forum, yah. I flashed that using fastboot as the recovery and then issued the reboot into recovery command and it just booted up android.
At this point, I am assuming the build/version I have isn't a standard build and I will have to do something outside the normal channels to get it to work. I might just chuck this and get another. Especially since I heard that there will be a compatible version of honeycomb for devices with less than stellar resolutions like the s7.
I think the key here is to unplug usb from computer and hold down the power and Vol+ button to reboot into recovery mode.
I struggled with this for probably half a day figuring that out.
thx for your help and I finally figured out the fastboot and then recovery.img. So then I rebooted and seleted the software upgrade via update and it been stuck on that selection for awhile. is that normal?
by the way upper left hand it has in white lettering Booting recovery kernel image.
chavezop said:
thx for your help and I finally figured out the fastboot and then recovery.img. So then I rebooted and seleted the software upgrade via update and it been stuck on that selection for awhile. is that normal?
Click to expand...
Click to collapse
It should say Booting recovery kernel image and then take you straight into clock work recovery...
Mines doing the same thing just getting stuck when it says Booting recovery kernel image and the dell logo apears then when i press the power button it turns off if i boot the device up not plugged into my computer and hold the power and volume+ it will flash red the LED and turn off.
Resolved Yet???
I'm having the same issue... CWM says it's working fine but when I try to load ROM it reboots normally back into the menu... Red lights blinking and does nothing when trying to get into recovery mode. Fastboot is only thing that seems to work and that even doesn't work properly...
I'm stuck with a ROM that is constantly crashing. Every 10 min or so, it needs to go. Please anyone that may have a method I could try would be appricitated...
J
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery
Code:
adb reboot recovery
. When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Which twrp you flashed? Check the correct twrp in my signature for honor 5C repository.
TassiloBalbo said:
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery . When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Click to expand...
Click to collapse
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
hassanjavaid8181 said:
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
Click to expand...
Click to collapse
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Meaning you can boot to fastboot but your pc doesn't recognise it?
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Did you try all method to going in fastboot.by adb fastboot command or by pressing vol- and power button?
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Glad that you fix your device.
If it is not bothering you let it be and enjoy using your phone.
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
TassiloBalbo said:
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
Click to expand...
Click to collapse
Try removing the usb cable and then try to biot to fastboot. What about erecovery
shashank1320 said:
Try removing the usb cable and then try to biot to fastboot. What about erecovery
Click to expand...
Click to collapse
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
TassiloBalbo said:
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
Click to expand...
Click to collapse
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
shashank1320 said:
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
Click to expand...
Click to collapse
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
TassiloBalbo said:
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
Click to expand...
Click to collapse
Meaning the fastboot is accessible.
Now you have firmware zip, extract it amd you will get few files. Use dload method as given in my signature and you are good to go.
Else use Huawei extractor and browse to update.app you just got in above downloaded zip. You will get boot, recovery, system img you need.
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
TassiloBalbo said:
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
Click to expand...
Click to collapse
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
shashank1320 said:
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
Click to expand...
Click to collapse
NEM-L31 but I don't know the build number
TassiloBalbo said:
NEM-L31 but I don't know the build number
Click to expand...
Click to collapse
Build number is necessary to get right files..
hassanjavaid8181 said:
Build number is necessary to get right files..
Click to expand...
Click to collapse
I know. So do you think it's dead?
TassiloBalbo said:
I know. So do you think it's dead?
Click to expand...
Click to collapse
You should try huawei service center....
So i accidentally flashed a magisk zip file to my p20 using a program called "TOOL ALL IN ONE" AS a recovery it showed that the process was completed but when i wanted to boot to fastboot it just shows that my phone is booting, same thing with recovery mod.
so basically i need a software that can let me install any recovery or repair my fastboot status as I am no longer capable of doing anything.
have you tried flashing it in ADB? i mean most of these tools are nice but when you type in the commands in adb to get things done then you will understand more and more about how everything works.
Eclipse.0 said:
So i accidentally flashed a magisk zip file to my p20 using a program called "TOOL ALL IN ONE" AS a recovery it showed that the process was completed but when i wanted to boot to fastboot it just shows that my phone is booting, same thing with recovery mod.
so basically i need a software that can let me install any recovery or repair my fastboot status as I am no longer capable of doing anything.
Click to expand...
Click to collapse
Did you solve this? I'm on the same situation. no recovery no fastboot!
Turn off your phone then press and hold power down button and don't press or hold nothing more. Hold power down and at same time connect your phone by USB to pc. Whoa, you are in a bootloader. It helped for me. Then you can reflash recovery and all will work again.
So I followed this guide, watch?v=eBAzsEw-QVsAnd, He used an auto flashing program, got to the step where you flash the recovery, it worked, the ADB was recognized and the writing of the recovery was successful.
But, when I tried booting into TWRP (by power + vol-up) I just get a black screen for a few secs and then the mi logo again.
Also, I manually installed TWRP 3.3.1 and still the same thing
Any suggestions?
Fullbit310 said:
So I followed this guide, watch?v=eBAzsEw-QVsAnd, He used an auto flashing program, got to the step where you flash the recovery, it worked, the ADB was recognized and the writing of the recovery was successful.
But, when I tried booting into TWRP (by power + vol-up) I just get a black screen for a few secs and then the mi logo again.
Also, I manually installed TWRP 3.3.1 and still the same thing
Any suggestions?
Click to expand...
Click to collapse
When you restore the phone try using the latest TWRP from here https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Copy the TWRP image to the adb/fastboot folder and rename to TWRP.img.
No need to use any tools, just boot into fastboot connect to the PC then in command prompt navigate to the adb folder and use
Code:
fastboot flash recovery TWRP.img
After installing boot immediately into TWRP and flash what you need.
In fastboot still press and hold power and vol+ until it vibrates. Then let go of power and keep pressing vol+ until TWRP boots
Hi All, I need fastboot!
Perhaps someone can help with my brick? I've unlocked the bootloader, installed TWRP and had lineageOS 18.1 installed once. The screen was dim so I tried to flash DotOS. And got a "failed to mount /tmp/com.android.resolv.apex to loop device /dev/block/loop16" error so I tried to reinstall stock 57 ROM.
I did "fastboot flash recovery boot.img" with the decrypted boot.img hoping to get colourOS recovery.
The phone is now bootlooping trying to get into recovery mode. It won't power off or respond to button presses except vol up + vol down seems to delay the reboot on a blank screen.
I was hoping to get to fastboot mode to flash TWRP. Can anyone help? Should I surrender and accept the bricking?
you can get back to stock by install the stock rom, vendor, and kernel with adb drivers and commands.
or
if your mobile is MIUI you can just use the software to revert back to stock rom remember it re-locks the bootloader and again you need to unlock
The phone is currently boot looping.
I can't even turn it off.
It displays RealME/Android logo, then small "> RECOVERY MODE" text at bottom, then "Orange State" text. Repeat..
It has no response to a usb cable - no usb messages in dmesg. So it is not detected by adb or fastboot.
When the battery finally goes flat, my only hope is that I can get fastboot to flash TWRP into the recovery partition. I am not confident of this :-(
frolyx said:
The phone is currently boot looping.
I can't even turn it off.
It displays RealME/Android logo, then small "> RECOVERY MODE" text at bottom, then "Orange State" text. Repeat..
It has no response to a usb cable - no usb messages in dmesg. So it is not detected by adb or fastboot.
When the battery finally goes flat, my only hope is that I can get fastboot to flash TWRP into the recovery partition. I am not confident of this :-(
Click to expand...
Click to collapse
did you ever get this solved and fixed? i have accidently done the same thing.
hey guys follow this youtube
managed to unbrick my phone
smiley.raver said:
did you ever get this solved and fixed? i have accidently done the same thing.
Click to expand...
Click to collapse
Not yet, but I will try the youtube method above..
This recovered the Phone!
But, win10 reported the MCT extractor contained a worm (the python script under linux didn't work). I'm not sure I can trust this phone 100% from now on LOL!
the bypass just deactivates mtk hardware verificaton as normally they have a special dongle they use with the software download
I havent had any issues
I will upload thw bypass i use which doesnt havw any virus