Related
After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Your device is most likely permanently bricked - when the bootloader is locked with a global ROM on a Chinese Xiaomi phone, nothing can be done to fix it - except one thing.
Are you sure you're booting into EDL mode correctly? I think you need to short two points on the main PCB while plugging in a USB cable. Xiaomi has a proprietary implementation of EDL mode - IIRC you need special Xiaomi software and a Mi account with the appropriate permissions (you can beg Xiaomi for permission on the Mi forums, or buy a working account from someone online). In EDL mode, you can re-flash the China ROM and recover the device.
Most likely, that's what I'll have to do, but I wanted to consume every chance and tutorial online before I remove the Back glass...SO it's Service Center or Test Point with auth accounts, which it's hard to get. I rather pay. Just wanted to make sure that it's bricked from my perspective, like I can't do anything to fix it from my end. Thanks
There is nothing you can do, the bootloader is now locked and you are on a rom that's not matching.
I used the Russian tech reported in one of the other threads about bricked k20 pro, costed me $20 and I needed to open up the phone, and do test point edl which were all easy and well worth it to save the $650 AUD I paid for the phone.
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012/page6
just add him on whatsapp and be nice to the tech and he will help you. I saw other posts if you ask him like an ass then he will ignore you.
I definitely don't want to open the phone. If it comes to that, I rather pay someone to do everything with proper tools and software.
You know, try to get in touch with xiaomi support. Explain The case and maybe they unlock it for you from there.
Hey Bro
Blitzz.666 said:
After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Click to expand...
Click to collapse
Did you find any solution without edl method? Cause currently I'm facing the same problem.
The only solution here is to go into EDL Mode, if you dont have an authorized mi account, I recommend s-unlock.com they have an automated service and their own tool to flash your phone, go check them out. If you have doubt opening the phone, it isnt hard. Just use playing card first and dont remove it, then find an old credit card to continue further gently.
Shaonhider97 said:
Did you find any solution without edl method? Cause currently I'm facing the same problem.
Click to expand...
Click to collapse
After removing the back of my phone and fixing it with the help of an awesome dude from Japan found on whatsapp...I tried to unlock my bootloader again, and realised that the account I had in my phone was not the one that I was entering on miUnlock. I couldn't see that because the error message at 99% was in trad Chinese.
Maybe it would've worked if I knew that. If you go into Fastboot and try to unlock it, what message do you get?
Hi there,
unfortunately I bricked my Mi8 during a ROM Flash. I could not see the options as they were "hidden" because of the resolution of my screen. And unfortunately the standard option seems to be "lock", so it did and now I cannot flash any ROM anymore.
Is the method with opening the phone and get in touch with a doggy service to unlock it still up date?
Is there anything I could do? Will Xiaomi help me if I write them an email?
Help would be much appreciated.
Well, not knowing what you flashed and how you did it, it's hard to give an advice.
Can you boot to recovery, fastboot?
If you want some "output" you have to give more "input".
Is you phone recognized if you connect it to the pc? Perhaps you can revive it with mi flash and a complete rom (tgz). Be aware of the danger of relock!
I know I did a mistake as i flashed it wrong as I did not choose the correct setting (just clean instead of clean and lock). I did not see the options when I did the flash as they were "hidden". The Bootloader is locked and therefore I cannot flash another ROM.
I can get into fastboot, no problem. But I cannot load a ROM (Bootloaderbis locked).
I do wonder if there is any way instead of opening the phone and get in touch with a commercial unlocker service.
berndbrecht said:
I know I did a mistake as i flashed it wrong as I did not choose the correct setting (just clean instead of clean and lock). I did not see the options when I did the flash as they were "hidden". The Bootloader is locked and therefore I cannot flash another ROM.
I can get into fastboot, no problem. But I cannot load a ROM (Bootloaderbis locked).
I do wonder if there is any way instead of opening the phone and get in touch with a commercial unlocker service.
Click to expand...
Click to collapse
Can't you simply use the bootloader unlock tool from MI?
Unfortunately not, it stops at the second point and tells me that this is not connected to my mi account.
berndbrecht said:
Unfortunately not, it stops at the second point and tells me that this is not connected to my mi account.
Click to expand...
Click to collapse
Wipe data and try again. What's the issue with "resolution of screen"?
Why would the wipe help? I guess all data is errased anyway because iIflashed a fastbootrom via mi flasher. The problem was that a portion of the program (mi flasher) was hidden, the part on the bottom where you choose which flashmethod. Therefore standard is lock device and that happened...
berndbrecht said:
Why would the wipe help? I guess all data is errased anyway because iIflashed a fastbootrom via mi flasher. The problem was that a portion of the program (mi flasher) was hidden, the part on the bottom where you choose which flashmethod. Therefore standard is lock device and that happened...
Click to expand...
Click to collapse
I don't think your description of the issue is detailed enough for helping.
What else do you need to know?
berndbrecht said:
What else do you need to know?
Click to expand...
Click to collapse
Just try to unlock bootloader again. If it is not possible, you have to contact with someone who has Xiaomi account authorization.
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
berndbrecht said:
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
Click to expand...
Click to collapse
I paid 12$ when my previous Redmi 6 pro was relocked after xiaomi.eu update. It is very sad that you must pay for authorization. Shame of Xiaomi.
berndbrecht said:
Yeah, like the s unlock service. I think their my last chance after reading through the internet. Not looking forward to open my phone. pfffff...
Click to expand...
Click to collapse
Is your device a Global or Chinese device and how long ago did you buy it and where from? If the bootloader was unlocked when you attempted to flash whatever you flashed then it was unlocked by someones account. Are you saying that you did not unlock it?
If you did unlock it yourself, then you can unbrick it. If someone else unlock the bootloader you should try contacting that person to get their id and password to unlock the device again, and then you can remove their account from the device and replace it with yours.
Next
Since you have fastboot
You need to download the fastboot rom for whichever device you own. Also, your phone must be clean, you will lose all data.
Mi8 Global Rom: https://c.mi.com/oc/miuidownload/detail?device=1700346
Chinese Mi 8 Rom : http://www.miui.com/download-345.html
Unpack the Rom, on your desktop and then place your phone into EDL Mode or fastboot. - The fastboot Rom comes with the Fastboot flashall script, it will fully restore your phone to the a Stable Rom and Overwrite every partition..
If you unpack the rom and it unzips into a larger version of the rom, unpack the new unpacked larger version, it will unpack into a folder, inside the folder local the flashall.bat file and with the phone connected double click it and wait 5 to 10 minutes until it reboots by itself, you will see the screen to connect to wifi, and then to add you account credentials, enter credentials, enjoy your restored phone.
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
mar.ur said:
I paid 12$ when my previous Redmi 6 pro was relocked after xiaomi.eu update. It is very sad that you must pay for authorization. Shame of Xiaomi.
Click to expand...
Click to collapse
You don't, ( well not anymore) you only pay someone to unlock if you do not have your account bound to the device. The person that you would pay has a vendors master unlocking account, these are very limited and these people are mostly located in Russia and Vietnam.
tsongming said:
Is your device a Global or Chinese device and how long ago did you buy it and where from? If the bootloader was unlocked when you attempted to flash whatever you flashed then it was unlocked by someones account. Are you saying that you did not unlock it?
If you did unlock it yourself, then you can unbrick it. If someone else unlock the bootloader you should try contacting that person to get their id and password to unlock the device again, and then you can remove their account from the device and replace it with yours.
Next
Since you have fastboot
You need to download the fastboot rom for whichever device you own. Also, your phone must be clean, you will lose all data.
Mi8 Global Rom: https://c.mi.com/oc/miuidownload/detail?device=1700346
Chinese Mi 8 Rom : http://www.miui.com/download-345.html
Unpack the Rom, on your desktop and then place your phone into EDL Mode or fastboot. - The fastboot Rom comes with the Fastboot flashall script, it will fully restore your phone to the a Stable Rom and Overwrite every partition..
If you unpack the rom and it unzips into a larger version of the rom, unpack the new unpacked larger version, it will unpack into a folder, inside the folder local the flashall.bat file and with the phone connected double click it and wait 5 to 10 minutes until it reboots by itself, you will see the screen to connect to wifi, and then to add you account credentials, enter credentials, enjoy your restored phone.
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
You don't, ( well not anymore) you only pay someone to unlock if you do not have your account bound to the device. The person that you would pay has a vendors master unlocking account, these are very limited and these people are mostly located in Russia and Vietnam.
Click to expand...
Click to collapse
Hi there,
that brings some light into the darkness, although I am did not completely understood all you wrote.
1. I bought the device used in Germany and it is the German version. It was unlocked and I installed Havoc OS which worked fine. Then I thought I should update Havoc OS and that'S what I did. This ended in a Bootloop. I went into the Recovery and it was kinda weird as it asked me in chinese to enter my pattern. I did and after that the touchscreen stopped working. Still could get into recovery and also install a new one via fastboot. But same problem. Then I googled and as I understood the solution to other people was an earlier MIUI ROM which I installed via the Mi Flash tool and here I am chosing the wrong selection for the flash and ending up in a brick.
2. I don't have the device connected to my MI account. So I guess I need someone with a vendor account? S Unlock also offers a software (one has still to pay) which works without the help of someone logging into and using e.g. Teamviewer. (at least that is their claim)
3. I cannot connect the device with MI flash and therefore no flash of a ROM is possible which brings me to
4. In any case, I for sure have to ****ing open the phone and play with the EDL Touchpoints? Right?
If one has any further ideas let me know, I am really fed up with this ****.
berndbrecht said:
Hi there,
that brings some light into the darkness, although I am did not completely understood all you wrote.
1. I bought the device used in Germany and it is the German version. It was unlocked and I installed Havoc OS which worked fine. Then I thought I should update Havoc OS and that'S what I did. This ended in a Bootloop. I went into the Recovery and it was kinda weird as it asked me in chinese to enter my pattern. I did and after that the touchscreen stopped working. Still could get into recovery and also install a new one via fastboot. But same problem. Then I googled and as I understood the solution to other people was an earlier MIUI ROM which I installed via the Mi Flash tool and here I am chosing the wrong selection for the flash and ending up in a brick.
2. I don't have the device connected to my MI account. So I guess I need someone with a vendor account? S Unlock also offers a software (one has still to pay) which works without the help of someone logging into and using e.g. Teamviewer. (at least that is their claim)
3. I cannot connect the device with MI flash and therefore no flash of a ROM is possible which brings me to
4. In any case, I for sure have to ****ing open the phone and play with the EDL Touchpoints? Right?
If one has any further ideas let me know, I am really fed up with this ****.
Click to expand...
Click to collapse
Okay that better explains your real issue
You had an issue with the lockscreen, which could had been resolved by removing encryption ( formatting user data ) by using ADB or using the Tool All in One. ) Unfortunately, you misunderstood what the issue was and flashed a rom without unchecking unlock bootloader.
Since the bootloader has been relocked, you may need the original account info that unlocked the bootloader. ( If it's still bound to the device) If possible contact the person that you bought the phone from and get their account, then you can use the steps that I listed above by placing the phone into EDL.
If you are asked for a Mi account password, after restoration, then the phone is absolutely still bound to the previous owners account.
You do not necessarily need to open the phone :
You can probably use ADB to place the phone into EDL mode : adb reboot edl
You can use an EDL cable Such as this one
On some phones it is possible to enter EDL by pressing and holding the power button and the volume up and down simultaneously, you can very that the phone is in EDL by connecting it to your PC then go to Control Panel/System/ports <<<< Here you will see port 9008, that means you are in EDL mode.
After installing fastboot rom via flash all.bat method
After connecting to WIFI, you may be asked for the Mi Cloud account (if linked) If so contact the previous owner for that account info, then once the phone has gone through setup, remove the account from the phone in settings/Backup ( It is also possible that the phone is not bound to a account) If no account is linked then you will be able to link a new account and then wait 72 to 360 hours to be able to re-unlock the bootloader.
If the phone is bound to a previous user,
The only option is to use a reputable service company who has a master unlock account. if this is indeed the case, you should try contact Xiaomi and see if they can recommend someplace close to where you live.
@berndbrecht
I just found out via the Mi-Globe website that a XDA member has an official Xiaomi Unlock account and the price is extremely fair: I would suggest contacting @NikSalsa
You can read the same article that I did here : https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
Also, there are a couple of additional options listed , if you have trouble reaching NikSalsa
Hello everyone,
I've decided to unlock my device to flash vanilla android but I couldn't unlock it. I've tried almost everything but even the latest MiUnlock doesn't recognize my device on fastboot, the PC itself recognizes it before and after getting into fastboot, I hear usb device connected sound and can see the phone under Windows devices.
Adb devices command works if the phone is switched on, my dev settings are ok, oem unlocking and adding account under dev settings are ok, I've tried it with disabled windows signature enforcement too but nothing happened. MiUnlock simply doesn't want to see the device on fastboot.
Can anybody help me, please?
abstra said:
Hello everyone,
I've decided to unlock my device to flash vanilla android but I couldn't unlock it. I've tried almost everything but even the latest MiUnlock doesn't recognize my device on fastboot, the PC itself recognizes it before and after getting into fastboot, I hear usb device connected sound and can see the phone under Windows devices.
Adb devices command works if the phone is switched on, my dev settings are ok, oem unlocking and adding account under dev settings are ok, I've tried it with disabled windows signature enforcement too but nothing happened. MiUnlock simply doesn't want to see the device on fastboot.
Can anybody help me, please?
Click to expand...
Click to collapse
The issue that you are experiencing is strictly with your PC.
You need to ensure that you are using an account that has admin privileges, and be sure that you antivirus is not neutering your usb drivers and Miflash program.
Next, if you are using a newer computer with usb 3 ports, you will need to use a USB hub ( USB 2 is your best option.) , then the phone will be seen in fastboot. As long as you have setup developer options, and your MiCloud account is setup.
Finally, it will take 2 weeks to unlock the bootloader , after your first request. Some people who had been syncing the phone to MiCloud for some time before attempting were able to immediately unlock. Personally we have 3 Mi8's in our house and I had to wait 2 weeks on each one.
To reiterate, your main issue is probably the usb ports, and your antivirus the the 2nd most likely culprit. Worst case use another computer. The process is much easier on older PC's.
you can use the the All in one tool to double check that your drivers, adb , and system wide privileges are up to date and setup correctly. https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Instructions are available on that thread.
Thanks for your help, I've already tried almost everything you've said up there and even gave a try on virtualbox Windows 7 with USB 2.0 setup.
I remember I've unlocked my friend's device last year on an only USB 2.0 computer, my laptop has unfortunately only two 3.0s and one USB-C. The phone can be seen under fastboot devices command if MiUnlock is not running, if I click on that cr*p program my device either falls from fastboot devices list or says press any key to shutdown.
The main problem is the ports and that damned program itself, how come it lockdowns the connection and after that pc couldn't even show my phone in devices list but can be seen in device manager. I'm literally shocked by the cheapness of this very software.
abstra said:
Thanks for your help, I've already tried almost everything you've said up there and even gave a try on virtualbox Windows 7 with USB 2.0 setup.
I remember I've unlocked my friend's device last year on an only USB 2.0 computer, my laptop has unfortunately only two 3.0s and one USB-C. The phone can be seen under fastboot devices command if MiUnlock is not running, if I click on that cr*p program my device either falls from fastboot devices list or says press any key to shutdown.
The main problem is the ports and that damned program itself, how come it lockdowns the connection and after that pc couldn't even show my phone in devices list but can be seen in device manager. I'm literally shocked by the cheapness of this very software.
Click to expand...
Click to collapse
Again the issue is with windows, I have personally dealt with the exact same issue. That is why I recommended using an older computer that has not been recently updated.
But you are absolutely right, Xiaomi has not made any development improvements with their desktop applications in over a year and that is ridiculous.
I would suggest using alternate versions of the software : I just did a google search and on this link people were saying just one week ago that this linked software worked for them, note its a video, the software link is in the description : https://www.youtube.com/watch?v=l_PEAJ-n2_c
Finally, I am personally using this version of Mi Flash : https://androidfilehost.com/?fid=11410932744536991669 on a brand new intel PC.
and the last time that I unlocked a xiaomi phone I used unlocker software from here ( Note the multiple versions at bottom of page)
https://mi-globe.com/download-xiaomi-mi-unlock-tool-all-versions/
If one doesn't work try another. just be sure that you have developer options setup correctly and that you are signed in a syncing with mi-cloud. You will get it unlocked eventually. I can assure you that it was a Pain in the A*$ for me too!
Thanks man, these are the exactly same links I’ve found and checked out while trying to connect my phone but I just gave up after three days of struggling and pressing volume+power buttons and ordered a USB 2.0 hub online. Unfortunately there are no older computers around me or anyone I can ask for because of you know, the quarantine. I’m actually using cloud actively, so I should better be prepared for an immediate unlocking, and backup my data beforehand as usual.
Just wanted to write about the news, I've backed up my data and connected my device to MiUnlock on USB 2.0 Hub and ta-da it's immediately unlocked without any waiting time. That was a smooth process, I'm shocked but happy.
abstra said:
Just wanted to write about the news, I've backed up my data and connected my device to MiUnlock on USB 2.0 Hub and ta-da it's immediately unlocked without any waiting time. That was a smooth process, I'm shocked but happy.
Click to expand...
Click to collapse
Nice, so my original suggestion about using 2.0 usb was correct. I am glad that you have the issue sorted. I am also surprised about you being able to avoid the wait time. That is a nice break. Enjoy your phone.
PS: Be sure to make a full TWRP backup and save it to your desktop. That backup will save you if you ever experience a bad issue.
tsongming said:
Nice, so my original suggestion about using 2.0 usb was correct. I am glad that you have the issue sorted. I am also surprised about you being able to avoid the wait time. That is a nice break. Enjoy your phone.
PS: Be sure to make a full TWRP backup and save it to your desktop. That backup will save you if you ever experience a bad issue.
Click to expand...
Click to collapse
Thanks man, and yes that was all about fastboot which is written to be used with older usb versions. After plugging in the hub, it’s connected directly in just milliseconds. I am surprised that I’ve really skipped the waiting for two weeks or maybe more and yeah it makes me happy.
I made a full data backup before unlocking and then all the dangerous partitions including modem, efs and bluetooth in TWRP to avoid any irreversible loss. I never skip my recovery backups since 2010 and my first Android smartphone which was an HTC Desire A8181, I learned it in a hard way to never skip them, if you do, you either lose your data or your mobile device identification. :victory:
A question from a Xiaomi-newbie; If I run clean all and lock command on MiFlash, should I wait for an unknown time to unlock the device again? Or does Xiaomi let users to lock/unlock their devices anytime without waiting if you’ve unlocked your bootloader once before?
abstra said:
Thanks man, and yes that was all about fastboot which is written to be used with older usb versions. After plugging in the hub, it’s connected directly in just milliseconds. I am surprised that I’ve really skipped the waiting for two weeks or maybe more and yeah it makes me happy.
I made a full data backup before unlocking and then all the dangerous partitions including modem, efs and bluetooth in TWRP to avoid any irreversible loss. I never skip my recovery backups since 2010 and my first Android smartphone which was an HTC Desire A8181, I learned it in a hard way to never skip them, if you do, you either lose your data or your mobile device identification. :victory:
A question from a Xiaomi-newbie; If I run clean all and lock command on MiFlash, should I wait for an unknown time to unlock the device again? Or does Xiaomi let users to lock/unlock their devices anytime without waiting if you’ve unlocked your bootloader once before?
Click to expand...
Click to collapse
I have only unlocked my device once. But I wouldn't think there would be an issue to unlock a second time. In fact, I have read about some people needing to wait 72 hours to unlock it again after relocking. if using Mi-Flash just try to be sure uncheck that lock bootloader box, that is unless you want it locked.
One last thing, if you ever decide to restore the phone using the flashall.bat method, the bootloader stays unlocked.
Hey there! My friend brought me the Xiaomi Redmi 4A, he got it from his aunt, she wanted to throw it away as she forgot her password to her Mi Account and the phone due to the FRP is unusable. The problem even graduates, because she has it paired with her old old phone number, so no way recovering her password.
So my question is, how does Xiaomi FRP works and how can I bypass it? I never faced this problem, and I'm stuck on this for the fourth day. I'm bypassing Google FRP on almost daily basis, but this one works different way. Here is what I have tried.
I tried to mess with the Mi account using Quick Shortcut, like with the GAM.
Tried using second space functionality and delete the account from there - it's not there.
Flashed a stock ROM using Mi Flash Tool - no luck. Then tried it again, with persist.img flashing enabled. I got into the phone, was able to turn on USB debugging and mess around, but then when I connected it to the Wi-Fi, it became locked again - WHICH MAKES ME THING...
...that when it connects to the internet, the device brings up to the Xiaomi servers and asks for details. So possible solutions I can think of are:
Disabling the Mi services completely before connecting to the Wi-Fi so it will not get locked - I guess
Changing some device numbers (IMEI's, etc.) but I don't know how the device identifies itself with the servers, and how to do it in the first place
Flashing there some custom ROM (preferably Lineage OS) - but this brings the problem that I dunno how I would flash it directly, or how do I flash TWRP first, because I don't have unlocked bootloader (I flashed the stock ROM using EDL mode by shorting those two pins on the motherboard)
Thank you for your help a lot!
If you would have read my question, you would know that I'm asking how does Xiaomi FRP works, not the Google one. This phone is locked with Mi Account. But still, thank you!
Hello, i wanted to unlock my xiaomi redmi 8's bootloader because i wanna install root on it. I completely understand the risks and im willing to unlock it. I don't care if it takes months for xiaomi to approve my mi account. So, when i tried logging in into mi unlock tool with my mi account, first thing i noticed is that its quite slow. Anyway i entered my details when i was at the account login page, and then a few seconds later the page turned white. At first i thought it was just simply loading however after i checked the logs, i see this message: WARNING: account loading error: -188. Ive done some research why it isnt working. They suggested that i should disable my antivirus and run the tool with administrator priviliges. However that didnt help either. Ive also noticed that after i clicked add account and device in mi unlock state, (i enabled mobile data and turned off wifi) it said my mi account had been added. However when i exit out of mi unlock state and go back it says to add my account again. I dont know if thats intentional or not. If somebody can help me i'd gladly appreciate it.
if youve failed unlocking it, your phone is still safely under guarantee, have no fear (IMHO)
i remembered ~2Y ago when i tried unlocking it i was also sent in a loop. i followed the usual guides and all and was also reverified on my phone and PC again. sometimes the mi server can be buggy, and we had to wait for a bit.
make sure your phones SIM 1 (in the middle) has both SMS and data kuota available, as thats how they verify your device and account. IIRC 1 SMS to their servers, and 1 verification data from network to your phone.
I haven't gotten to unlock my device yet. So far i'm at the logging in into mi unlock tool stage. And also yes, i have all of those things that you mentioned.
yep it looks like youre stumped after waiting a day. for references, which guide are you following? does windows and ADB|fastboot detect your phone and driver?
usually an account is verified after a few days when creating a new xiaomi account, and 1 week after using the phone.
from what i remembered that most guides dont state is that my friend told me to locate my device first via i.mi.com first. after locating the device in normal system mode, follow the usual steps. as i said i too remembered how buggy mi unlock can be. hopefully others can also chime in.
my mi unlock tools an ancient 4.5.514.47, newer versions should be preferred for security|bugfixes, but im just saying i unlocked it with that version in case it might help.
Yes mi unlock tool detects my device in fastboot mode. I'm following a tutorial on youtube.
Good news, i managed to unlock and root my phone! I guess i was just lucky because i tried logging from day to day and i finally got it to work.