Hi all,
I have manage to unlock my bootloader so I could change my device to C432 instead of C900. My Device is a EVA-L09.
The problem I have now is I am unable to flash the latest firmware C432B166.
I have tried a app called DC Phoenix to help me flash the firmware as trwp was giving invaild arguments.
I have managed to flash update.app, uodate_data_dt_default.app, uodate_data_hw_eu.app and update_data_hw_normal.app. The only issue I have now is that when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
I really don't want to send the phone to Huawei as the bootloader is unlocked.
Thanks in advance.
Sent from my SM-G928F using Tapatalk
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot
Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4
morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs
@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working
Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:
morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?
MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:
Sorry for being late, i had no spare time the past days. Glad you fixed your problem
Hello guys!
I have bricked my P9 EVA-L09 today. i want to update it to android 7 with update from erecovery. i put files from update_data_full_hw_eu.zip and it went good but phone wont boot up and the second file "update.zip" ive extracted to dload but phone cant install it. I've tried many things to unbrick my phone but i cant do it. flashing system via fastboot is impossible cause it says that it cant be written. i have no root ant no bootloader unlocked. Please help me guys QQ
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
marjaN_ said:
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
Click to expand...
Click to collapse
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Nobody can help me? :crying::crying::crying:
power off, then press the Power + voulume +, wipe data+cache
ziemiak said:
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Click to expand...
Click to collapse
try installing 6.0 firmware for you model.
i cant go to eRecovery, i cant even shut down device - only full discharge can make it.But i can go to fastboot. Ive tried with fastboot commands but i have locked bootloader and every time my flashes are rejected by phone. The simpliest metod - HiSuite send me message: "no recovery packages are found for your phone model". It should be a way to unbrick it with fastboot but i dont know how.
Hi I was in your shoes yesterday I had to pay for the dn Phoenix to fix my phone it uses a backdoor to install firmware from fastboot
You could try and look for the backdoor commands I found this , I would post a link but can't yet
fastboot oem backdoor info
FB LockState: LOCKED
USER LockState: LOCKED
fastboot oem backdoor get
FBLOCK**obfuscated**
fastboot oem backdoor end
remote: fastboot stat not match
fastboot oem get-bootinfo
locked
fastboot oem check-rootinfo
old_stat: SAFE
now_stat: SAFE
change_time: 0000000000
fastboot oem check-image
secure image verify success
fastboot oem relock
remote: stat not match
fastboot oem backdoor set
remote: data parse fail
fastboot oem frp-erase
Haven't tried, but should remove the Factory Reset Protection (FRP)
fastboot oem emmc_diag
cid info:
mid 17,oid 256,pnm 064G70,prv 0.0,psn 0x18b66278,
csd dump:
D02700320F5903FFFFFFFFEF864000AB00
ext_csd dump:
...
FMW FAIL! WRITE PROTECT!
fastboot oem emmc-dump
unknown status code
fastboot oem get_key_version
huawei_key_v1
fastboot oem battery_present_check
3984mv
fastboot oem get_hwnff_ver
Ver2.3
fastboot oem get-psid
SN:**YourIMEI**
fastboot oem get-build-number
V100R001C00B000
fastboot oem get-product-model
HUAWEI M2-A01W
I will try to send my Huawei to warranty service and if they wont repair my phone ill pay for DC Phoenix too
I had the same problem!
Hi there.
Was in the same situation as you not so long ago.
Get a micro SD card, plug into PC, create a dload folder then download the rollback file from the Huawei website.
I'm a new user so can't post URL. Just Google "Huawei P9 rollback" should be the 2nd option (consumer.huawei link)
Put in the dload folder and put into your P9.
Press and hold power, vol up and down together till the Huawei logo appears and let go when you feel the vibrate.
This should force update and restart. (does not rollback to email 4.1, only unlocks the rollback from emui 5)
Next you need to download your previous firmware, in my case I'm in the UK with unlocked P9, so I downloaded EVA-L09C432B166.
Same again, put micro SD into PC, delete the rollback file and put your firmware in its place.
Put back in the P9 and repeat the above force update.
This will put you back to working stable stock.
For further reassurance, download a build previous to B166 so when it's up and running you can search for an OTA update to make sure all is in order.
Hope this helps.
Did you meant that the rollback flashes without going to eRecovery? I said some posts earlier that i cannot enter eRecovery so i cant dload anything. Im stuck on Huawei logo all the time do you think than i can flash something via dload without going to eRecovery?
erecovery is different.
I'm saying to do a force update, but in order to do so you need a microSD card.
Erecovery involves holding power up while connecting to PC in order to use HiSuite etc to recover.
Force updater tells the phone to search for dload folder on SD card or phone and install the update before trying to boot up OS.
So, if you connect microSD to your PC via a card reader etc and not via your phone, you can create a dload folder, download the rollback file from Huawei (above) the file is only around 80mb or so, plug the SD card back into your phone while powered off, hold down Power + vol up + vol down. The Huawei logo will appear, when it disappears let go of all the buttons. This should bring up the Update screen.
At this point the phone will install the rollback file. and this will bypass the rollback prevention in emui 5 and therefore allow you to install a previous emui build (4.1)
Again though your phone will still not boot at this point as there is no OS working or installed.
So you need to download the corresponding firmware for your phone/country/operator. Once downloaded, remove the memory card from the phone, connect to PC via card reader, delete the rollback file you placed in the dload folder and replace it with the downloaded OS and repeat the process used to install the rollback.
From there you should be back to stock marshmallow.
I should point out the files you download may be in zip folders. You need to extract the "update" file and that's what you place in the dload folder.
Hope this all makes sense, if not I can make a YouTube video and post it.
Good luck.
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
http://www.android-hilfe.de/thema/downgrade-von-b360-zurueck-auf-b182.813366/
You must first make a step.
Only http://download-c.huawei.com/download/downloadCenter?downloadId=92743&version=363740&siteCode=de
Then
http://download-c.huawei.com/download/downloadCenter?downloadId=91783&version=358257&siteCode=de
're After You on MM and then can do what you want.
In the first link is a guide.
I did the same thing is what you doing today I've tried this and it fixed my phone
ziemiak said:
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
Click to expand...
Click to collapse
The rollback package for L09 model is here: http://download-c.huawei.com/download/downloadCenter?downloadId=91892&version=363759&siteCode=es
Inform the results please.
I made a video to better understand. This wideo is showing that phone isn't searching any dload folder. https://youtu.be/oD9AI_6SqLs
edit: i have tried your advices to put rollback and try to dload it and then same with firmware but there is no reaction i didnt see there any circle with progress of flashing (like it was before i flashed rollback for L19)
Mine is now doing the exact same thing - I too tried the dload method to update from C432B182 to C432B361 and it's screwed my device up too.
Until I tried to use the 'rollback' package, it would at least allow me to power off, so I could get back into the Update screen - after doing that, and trying the B182 again, it's got into this position where I can do literally nothing with it. No combination of buttons, no matter how long I try to hold them, seems to do anything.
An update...
After letting my battery drain completely, I have been able to get into Fastboot mode, by pressing and holding the Volume Down button whilst connecting a USB cable to my PC.
From here, I have been able to run DC-Phoenix, and have been able to write some .APP files to it - which has at the very least got it booting into eRecovery, rather than the boot loop it had before, but is still not fully booting.
It looks like I might need the full, original firmware, in order to proceed?
And I've got about 68 hours left to flash using DC-Phoenix, or I'll have to spend another €15!
Yes you download the original firmware unzip it and put it in the "dload" folder of SD card then do a force update. Hold all the buttons vol + vol - and power
Hi guys I have a problem. I tried to upgrade my p9 plus manually with an ota update.
I had VIE-L09ITAC555B130 and I tried to install VIE-L09ITAC555B360 to get emui 5.0. The updater wasn't able to complete the download so I tried manually. B360 is split in two files (I don't know why, this is my first Huawei), I tried the first but at 30/40% I got an error, then I tried the second update.app and now my phone boot in eRecovery mode.
I can also boot in fastboot mode but my bootloader is locked and I can't get the product ID.
I also tried to install B130 again but it didn't complete the process. I don't know what to do anymore, some suggestion?
Sorry if my english is pretty bad...
Hello folks,
so a friend of mine is a complete noob and have this problem with his p9 plus.
The phone keeps rebooting itself in an endless loop, i can't access recovery and only when plugged in to the PC i can access fast-boot.
Phone is locked, FRP Lock.
With getvar command i managed to get this info:
rescue_phoneinfo: VIE-L09C113B170
seems that there is no full zip of this rom anywhere just partial ota (found those with firmware finder) but even with that when i try to flash recovery i get command not allowed.
On the fastboot screen of the phone i have this reboot reason AP_S_PANIC
anyone knows a how to get the phone out of this? (i was thinking that maybe unlocking the bootloader could be of any use, but in the request page it's needed the Product_ID and i don't have it. (can't *#*#1357946#*#*)
I don't know if it does work in a locked bootloader.
I have my P9+ for a week and maybe if you download a firmware compatible with your version and try to 'hard' update the phone, using a SD card with a update file on a dload folder and restarting the phone pressing VolUp + VolDown +Pwr, you can restore your friend's phone.
I'm sorry if I didn't help, I am myself stucked trying to rollback my version to MM and have the NFC and the Bluetooth working again...
myself also got this problem..please anyone..