guys im facing these problems on my redmi 4 indian variant
Problem One: I am unable to add my fingerprint. Whenever I try to add one I receive following message: "couldn't add Fingerprint, try again." It should be noted here that when I try to add it, I feel 11 vibrations on my phone and see a progress of fingerprint add-on device. The message appears at 12 steps.
Problem Two: I am also getting Following Error message "find device storage corrupted your device is unsafe now error"
Problem three : when i see mi unlock status its showing device locked and secured but when i reset my device its asking again to add mi account not showing my old account
problem Four : when i click to bound my account to device im getting a error of try again later
my device is not rooted even bootlocker also
i have tried resetting hard and soft reset didnt worked
my fingerprint i used upto yesterday but after rebooting my phone once im facinv this issue but the find device storage issue is from so many days
please need help
Flash your device with miui latest global rom using mi flash tool .
rkdok23 said:
Flash your device with miui latest global rom using mi flash tool .
Click to expand...
Click to collapse
wil it work if we jut update using the OTA updater in the phone? or it is only possible to fix this my flashing with the flash tool?
Locked BL
rkdok23 said:
Flash your device with miui latest global rom using mi flash tool .
Click to expand...
Click to collapse
How we can use miflashtool if our BL still locked? My device are still locked from last year. Have tried everything. But no luck. on mi unlock status, it says Still couldnt verify account and device. Have update it to miui 10 8.7.19 using xiaomitool, and now, it says : couldnt add. error code 20091
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
kalyanlove said:
guys im facing these problems on my redmi 4 indian variant
Problem One: I am unable to add my fingerprint. Whenever I try to add one I receive following message: "couldn't add Fingerprint, try again." It should be noted here that when I try to add it, I feel 11 vibrations on my phone and see a progress of fingerprint add-on device. The message appears at 12 steps.
Problem Two: I am also getting Following Error message "find device storage corrupted your device is unsafe now error"
Problem three : when i see mi unlock status its showing device locked and secured but when i reset my device its asking again to add mi account not showing my old account
problem Four : when i click to bound my account to device im getting a error of try again later
my device is not rooted even bootlocker also
i have tried resetting hard and soft reset didnt worked
my fingerprint i used upto yesterday but after rebooting my phone once im facinv this issue but the find device storage issue is from so many days
please need help
Click to expand...
Click to collapse
your problems, same as mine. Have tried everything. But no luck. Hope somebody help us. Maybe a tricks to unofficially unlock BL
When I'm trying to set screen lock pin the system answer that Samsung cannot login because device is rooted.
There is anyone have fixed this issue? Many Thank.
Click to expand...
Click to collapse
SOLVED: Failed login to Samsung account because device is rooted
To get rid of Samsung account request when device is rooted, you need to freeze system app "Samsung Experience Service". Useful to set lock screen bypassing Samsung login. When finished, unfreeze it to avoid the bootloop at next reboot. You can freeze with the app Link2SD by Bulent Akpinar
Already solved. Read through the threads once again.
Did you find a solution?
Hi,
I have rooted my Samsung A6 Plus (SM-A605G), the root was successful. Screen lock pin or password was also successfully saved/set, but when I try to open the phone using the same screen lock pin it says "invalid pin/try again". Also, I am unable to login to my Samsung account, after typing valid credentials processing starts and after half a minute it says "processing failed".
Can anyone help me to fix this?
Thanks in advance.
same problem
same problem guys please help :crying:
You can read this thread.
https://forum.xda-developers.com/galaxy-a6/how-to/galaxy-a6-lockscreen-samsung-account-t4010211
I was happily use my Note 9 N960N(Korean set) after I rooted it about a year ago. Few days ago I saw a new ver of Magisk(old ver 17.2 flashed w/TWRP) at Magisk manager and wanted to update but hesitate. I backup a few important file like whatsapp, SMS & contact list before I carry on further. Today I decided to update the Magisk and my fear was right, after it reboot my Note 9 stuck at "Samsung" logo. I let it there initially and after a while it remains at same place. I tried to switch it off by press the power button but no response. It won't switch off after I tried, 10, 20 and 30 seconds. I found out there is a way to reboot it by holding "power + volume down". I successfully got it boot to recovery to TWRP.
I thought it maybe the Magisk was corruptted during update so I download the Magisk zip v19.3. Then I booted to TWRP and installed the Magisk zip. I reboot the Note 9 after Magisk installed. Again I was stuck at Samsung logo. I thought maybe the sequence was not correct; beside the Magisk there maybe need few more so I followed the root sequence(skip root); 1. Magisk 2. no-verity-opt-encrypt-6.0 3. RMM-State_Bypass_Mesa_v2
Same problem, I stuck at Samsung logo. As early problem, I couldn't switch it off by pressed the power switch. I have to reboot to TWRP and use its interface to power off the phone. I have new problem this time; once I pressed the power button to power on the phone, it will goes to TWRP straight away. Tried few times and it remain the same problem. The last action what i did is flashed a new TWRP v3.3.1-0-crownlte and it didn't help either.
My Note 9 has 2 problems;
1. go to TWRP recovery straight after press power button to power up the phone.
2. stuck at samsung logo after user TWRP to reboot.
There is one more thing I didn't pay attention previously, the "mount" in the TWRP what is supposed to mount? It "mount" the SD card when it last to flash zip files.
Appreciated anyone can helps, thanks.
Try to flash different kernel. Then flash magisk again. Although I doubt it could help, but your phone has bricked already, so worth to try.
If it's really brick, I'll consider to flash it "pie" since my one still "oreo". Any chance just reflash it with oreo again with odin but retain data?
user109 said:
If it's really brick, I'll consider to flash it "pie" since my one still "oreo". Any chance just reflash it with oreo again with odin but retain data?
Click to expand...
Click to collapse
Phone will factory reset after flash stock regardless odin or smartswitch. Of course you can still flash oreo. But flashing stock should be the last resort.
Rosli59564 said:
Try to flash different kernel. Then flash magisk again. Although I doubt it could help, but your phone has bricked already, so worth to try.
Click to expand...
Click to collapse
You did mention to flash a different kernel, what will it be the most suitable?
I found a suggested solution to try; flash(with oreo, same ver) with odin and check files except at CSC section choose "home_csc" instead normal "csc". Reflash was succeeded, in a way.. It did break something though.. My note 9 is able to boot normal but was stopped at lock screen(pattern lock) which I was set to lock my phone. Now it's lock screen loop even though I draw the pattern correctly. It just refuses to unlock. I use Samsung "findmymobile" try to unlock it and unsuccessful; the app cannot find the phone. It prompted "offline"! It's strange, I can see my carrier and wifi are working. I can call the preset emergency numbers to call. I used another phone to call and it can receive the call. It can receive whatsapp message. I tried google and it works. The google app is able to find my phone. I have no idea why my samsung account won't work. Now I'm clueless.. :crying:
user109 said:
I found a suggested solution to try; flash(with oreo, same ver) with odin and check files except at CSC section choose "home_csc" instead normal "csc". Reflash was succeeded, in a way.. It did break something though.. My note 9 is able to boot normal but was stopped at lock screen(pattern lock) which I was set to lock my phone. Now it's lock screen loop even though I draw the pattern correctly. It just refuses to unlock. I use Samsung "findmymobile" try to unlock it and unsuccessful; the app cannot find the phone. It prompted "offline"! It's strange, I can see my carrier and wifi are working. I can call the preset emergency numbers to call. I used another phone to call and it can receive the call. It can receive whatsapp message. I tried google and it works. The google app is able to find my phone. I have no idea why my samsung account won't work. Now I'm clueless.. :crying:
Click to expand...
Click to collapse
it's a Samsung stupid lock as your Note 9 has not fully booted you will not be able to find it via my Samsung.. There is a bug even if you draw the correct pattern the phone will not unlock it's a bug this has been covered when the Note first came out as the first or second update caused this issue! i did read somewhere there is a way around it, but this was a year or so ago you need to check Samsung official forums for the pattern bug fix check Samsung forums USA it has been covered in-depth over there!
N1NJATH3ORY said:
it's a Samsung stupid lock as your Note 9 has not fully booted you will not be able to find it via my Samsung.. There is a bug even if you draw the correct pattern the phone will not unlock it's a bug this has been covered when the Note first came out as the first or second update caused this issue! i did read somewhere there is a way around it, but this was a year or so ago you need to check Samsung official forums for the pattern bug fix check Samsung forums USA it has been covered in-depth over there!
Click to expand...
Click to collapse
Hi N1NJATH3ORY, I did google around the screenlock loop problems and most of them done with 1) simple reboot 2) boot to safe mode 3) use "samsung "findmymobile". A most common solution; "wipe". A few issues raised at Samsung forum but not helpful; "call Samsung support".. There was an interesting article which suggested the problem is from google itself. Here is the link; https://www.androidpolice.com/2019/12/12/google-pixel-pin-lock-screen-loop-help/
"If the encryption of the "Synthetic Password Key blob", which needs to be decrypted in order for the unlock process to be resolved, is not able to retrieve a stored decryption key if it was corrupted." from the article. I'm not sure if this is the cause but from logic point of view it's possible. I believe the bloody Samsung knew this problem since day one but because it's not a"common" issue Samsung just swipe under the carpet.
What I did on my note 9 last action was reflash the oreo, if in the process of flashing the "Synthetic Password Key blob" has been wiped out then it may explain this screenlock loop problem, which I hope not to happen. I'll be screwed if it did. :crying:
I'll wait its battery to drain out to see what happen even though I doubt if any change..
As expected, the drained out of battery did not help, my note 9 remains locked. The only way is to try out new method and with high risk which will wipe out my data. Fortunately the new method work! Not only it overwrite the lock screen loop and also disable the google device lock.(One of the method I tried during my lockscreen loop which is useless. It creates an extra problem on top of the problem) I got all my data intact and allow me to do all backup. :highfive:
summary: update Magisk is not a full proof. The risk is 50% it will brick the phone. My advise is to backup every dan internal data before finger press the Magisk "update" especially it remaps the image! Manager APK is okay to update. I learned from the hard way and almost lost the whole dan data in my Note. You have been warned!
Gdhhs
Hey there,
i've tried to replace the screen on several p30 pro devices (device has been working before). Unfortunately i allways run into the same problem: After reassambling the phone is stuck at huawei Logo, EMUI erecovery shows the retrieving package inforation failed. Trying the old display doesnt work either, same result. I've tried to replace the screen very carefully, i'm an experienced phone repairer so i think, that there is nothing damaged...Did anyone experience the same? Could it be possible, that this is caused by not changing the heatpaste? thanks for your help