I've been trying flash pixel experience on Redmi Note 9 and it had always caused brick.
When I flash vbmeta and boot.img I can access the Recovery but system goes in bootloop. Then I flash stock boot.img for miui 12.5.2 it successfully boot system but Recovery replaced to Stock Recovery.
I flashed the system through recovery after I flashed boot.img and reboot into recovery. After that I Replaced the patched boot.img to stock one then successfully boot.
I am using PE now but can't go to the twrp.
What is wrong here I really need an answer.
Try to flash the full stock MIUI again.
VD171 said:
Try to flash the full stock MIUI again.
Click to expand...
Click to collapse
I tried 12.0.6. Same. Tried 12.0.8. Same. Tried 12.5.2. Same.
Can't flash through SPflash as last time it locked oem unlock and miunlock couldn't unlock.
Yes, you can if you are flashing the stock MIUI.
Related
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
steve.24 said:
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
Click to expand...
Click to collapse
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
reversegear said:
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
Click to expand...
Click to collapse
I'll give it a try. Currently I have data wiped and installed full ROM through fastboot method. So next time, for sure I'll give it a shot.
But I have a doubt, where TWRP be able to flash an MIUI ROM. I mean the bootloader unlocked, encrypted system partition and all.
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
scholastova said:
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
Click to expand...
Click to collapse
Can you give stock recovery from mi max 2? I forgot to back up his original recovery stock and was hit with twrp.
hi friend i have xiaomi redmi 4x i have unlocked bootloader OK
I have install twrp 3110 OK
when i install this xiaomi.eu rom latest beta everything is OK
when i want install back latest stable global 9.110 by xiaomi i download normal recovery rom from xiaomi site and put it on phone storage then i normal go twrp wipe (factory reset) install 9110 install is ok
when i click reboot system i see on boot only mi logo and no this .... powered by android
also same when i choose in twrp wife all data system etc expect storage where is this downloaded rom.
could any explain me why it stuck at boot if installation via twrp is ok ?
but when i install back this xiaomi.eu rom boot works OK
tubabuyukustun said:
hi friend ....
could any explain me why it stuck at boot if installation via twrp is ok ?
Click to expand...
Click to collapse
Hello, this happens because official MIUI boot.img verifies if recovery.img is also official/original.
You have 2 options to resolve the boot problem:
1. If you want to keep TWRP then modify boot.img... http://en.miui.com/thread-249666-1-1.html (with R4X image of course)
and flash it from TWRP or fastboot: fastboot flash boot boot.img
2. If you want original recovery, get "recovery.img" from the exact TGZ image as your MIUI ZIP
and flash it: fastboot flash recovery recovery.img
:good:
is there any way to root this phone?
I've been searching for a way but i think there is no way yet
moeizio said:
is there any way to root this phone?
I've been searching for a way but i think there is no way yet
Click to expand...
Click to collapse
you can download and install the TWRP Recovery on Xiaomi Redmi 8. This is an official TWRP.
twrp.me/xiaomi/xiaomiredmi8.html
elyazghi said:
you can download and install the TWRP Recovery on Xiaomi Redmi 8. This is an official TWRP.
twrp.me/xiaomi/xiaomiredmi8.html
Click to expand...
Click to collapse
thanks i'm currently waiting for the bootloader unlock count down
can you give me some instructions to flash TWRP on the phone cause i'm kinda new to this stuff
Use latest magsik manger apk extract your boot.img from your stock firmware then patch boot.img using magsik manger then flash the patched boot.img and first of all unlock your bootloader I recommend you use mi unlock sent request for unlocking your bootloader
Unable to install official TWRP in Redmi 8, Miui 11.0.7. It installed. and then vanished when rebooted. and then boot looped. Had to flash original recovery and boot img to reboot.
Had made sure that I didn't boot to system after flashing TWRP. and boot to recovery instead. It flashed okay. Could use the root after installing Magisk. But on reboot, all was gone. Boot looped.
hi bro how did you unlock bootloader on redmi 8 its on 11.0.6.0
Hey people, I have the same problem installing TWRP. When I reboot after installing twrp.img, the recovery mode show me the recovery from the original ROM stock. I made this process hundred of times and gets the same result, original Redmi recovery erase TWRP recovery.
If someone know any solution I would really appreciate it.
xjunglist said:
Hey people, I have the same problem installing TWRP. When I reboot after installing twrp.img, the recovery mode show me the recovery from the original ROM stock. I made this process hundred of times and gets the same result, original Redmi recovery erase TWRP recovery.
If someone know any solution I would really appreciate it.
Click to expand...
Click to collapse
It's listed all over here just do some searching . Different models have different methods.
Hello friends,
I am not new with locking/unlocking, flashing roms....
I used to install different roms and had different problems but never met something like this.
so the problem is:
I unlocked my phone, installed twrp and tried to flash different roms (OOS, Lineage, Pixel experience) but it is still rebooting to fastboot and Im not able to go back to twrp recovery unless I flash bacl stock rom via miflash and flash twrp again.
I tried different twrps as well, wiped data, factory reset, advanced wipe.. still not able to flash any rom.
any advise?
Thanks in advance :good:
benzoxerxi said:
Hello friends,
I am not new with locking/unlocking, flashing roms....
I used to install different roms and had different problems but never met something like this.
so the problem is:
I unlocked my phone, installed twrp and tried to flash different roms (OOS, Lineage, Pixel experience) but it is still rebooting to fastboot and Im not able to go back to twrp recovery unless I flash bacl stock rom via miflash and flash twrp again.
I tried different twrps as well, wiped data, factory reset, advanced wipe.. still not able to flash any rom.
any advise?
Thanks in advance :good:
Click to expand...
Click to collapse
When flashing over stock MIUI you need to format data in TWRP. (Format, not wipe, need to type 'yes' to confirm.
Also, when restoring MIUI, make sure you boot into MIUI once before you flash anything else.
Use the latest 3.3.1-32 TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Restore MIUI and boot into it.
Flash TWRP and boot into TWRP
Do a factory reset.
Format data.
Reboot into TWRP - this ensures the formatted data partition is mounted properly.
Flash the ROM, plus any extras.
Boot into system.
Everything should be good.
Maybe its problem with vbmeta, try to flash vbmeta first, but you need to boot to twrp trough adb command, then flash vbmeta, than flash twrp, reboot to twrp and flash vendor, rom if you want to ide custom rom, not Stock
vlubosh said:
Maybe its problem with vbmeta, try to flash vbmeta first, but you need to boot to twrp trough adb command, then flash vbmeta, than flash twrp, reboot to twrp and flash vendor, rom if you want to ide custom rom, not Stock
Click to expand...
Click to collapse
There shouldn't be any need to flash vbmeta.
In theory vbmeta would only be needed if you want to stick with MIUI, but without root, but want to install TWRP, maybe to debloat.
Flashing Magisk or flashing a custom ROM should remove the need to flash vbmeta.
If you're already on the latest MIUI there is no need to flash any vendor files, as they're already installed.
I dont know why, but Yesterday ive tried to flash custom rom, wiped everything and after flash and reboot the phone stucked in fastboot, wont boot to twrp,not with butt shortcut,not with adb command. So i try to flash vbmeta,than IT boots to twrp,and Also i was able to flash again twrp, this could be Also solution.
Hi there,
I've been rooting phones since Android 2, but lately it has been quite a challenge.
What I did so far:
Unpack new Xiaomi MI A2 (jasmine) device
Enabled Developer, USB debugging, OEM unlock in Android settings
Code:
fastboot oem unlock
Code:
fastboot flash boot_b TWRP-3.2.3-jasmine-20180804.img
TWRP ran fine. However, started with boot_a again.
OTA updated (about 6 times) to the newest version (Android 10, QKQ1.190910.002 V11.0.12.0.QDIMIXM)
Code:
fastboot flash boot_b twrp-3.4.0-0-jasmine_sprout.img
TWRP started only to the splash screen (showing "teamwin" and "Recovery Project 3.4.0-0"). Why is TWRP not starting properly?
Downloaded the stock fastboot image V11.0.12.0.QDIMIXM from https ://xiaomifirmwareupdater.com/archive/miui/jasmine/ and flash the stock boot.img via
Code:
fastboot flash boot_b jasmine_global_images_V11.0.12.0.QDIMIXM_10.0/images/boot.img
(my goal is to later patch it with Magisk and then install the patched version). However, the stock boot.img just hangs forever on the androidone screen. Why is the stock boot.img not starting properly?
I haven't used the Mi Unlock app and I didn't do an "fastboot flashing unlock_critical" yet. Is this necessary? What do I have to do to make the boot images work?
floydsen said:
Hi there,
I've been rooting phones since Android 2, but lately it has been quite a challenge.
What I did so far:
Unpack new Xiaomi MI A2 (jasmine) device
Enabled Developer, USB debugging, OEM unlock in Android settings
TWRP ran fine. However, started with boot_a again.
OTA updated (about 6 times) to the newest version (Android 10, QKQ1.190910.002 V11.0.12.0.QDIMIXM)
TWRP started only to the splash screen (showing "teamwin" and "Recovery Project 3.4.0-0"). Why is TWRP not starting properly?
Downloaded the stock fastboot image V11.0.12.0.QDIMIXM from https ://xiaomifirmwareupdater.com/archive/miui/jasmine/ and flash the stock boot.img via (my goal is to later patch it with Magisk and then install the patched version). However, the stock boot.img just hangs forever on the androidone screen. Why is the stock boot.img not starting properly?
I haven't used the Mi Unlock app and I didn't do an "fastboot flashing unlock_critical" yet. Is this necessary? What do I have to do to make the boot images work?
Click to expand...
Click to collapse
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
KevMetal said:
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
Click to expand...
Click to collapse
Ok. So I'm back to Stock image jasmine_global_images_V11.0.12.0.QDIMIXM_10.0 by executing "flash_all.sh". You are saying I should "simply boot". You mean:
Code:
fastboot boot TWRP-3.4.0-0-jasmine_sprout-for_V11.0.12.0.img
right? That doesn't work, it won't boot. How do I overcome secure boot and force encryption?
floydsen said:
Ok. So I'm back to Stock image jasmine_global_images_V11.0.12.0.QDIMIXM_10.0 by executing "flash_all.sh". You are saying I should "simply boot". You mean:
right? That doesn't work, it won't boot. How do I overcome secure boot and force encryption?
Click to expand...
Click to collapse
yes im saying that but post a pic of the error ...why or how doesn't it boot ..
if it is the official twrp just dump it and look for the unofficial Russian one or one modified by Nebrassy or use Orange fox and or Pitch black ..official is broken last time i checked
also the name of that looks like one hell of a job ..shorten it to
recovery.img or twrp.img
fastboot boot recovery.img
but first run
fastboot getvar all
& also run fastboot flashing unlock_critical
but most importantly get another recovery
& i don't want to insult your intelligence but after flashing stock did you check to make sure bootloader was still unlocked and that dev settings was activated and that adb was toggled to on and that you authorised adb again
basicall after stock boot device and do the above ..plug in usb ..toggle adb ..authorise ..run adb devices ..if you see your device ..adb reboot bootloader ..fastboot devices ..see your device ..fastboot getvar all ..see bootloader is unlocked ..fastboot flashing unlock_critical if not done yet ...make sure to do ALL the above again after data gets wiped.....put twrp in adb folder ( MUST BE UNOFFICIAL RUSSIAN OR MODUFIED BY NEBRASSY ..rename to revovery.img ...fastboot boot recovery.img .. use file manager to put magisk.zip on internal then flash ..then reboot to rooted phone with stock recovery ...
Sent from my wayne using XDA Labs
KevMetal said:
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
Click to expand...
Click to collapse
KevMetal said:
yes im saying that but post a pic of the error ...why or how doesn't it boot ..
if it is the official twrp just dump it and look for the unofficial Russian one or one modified by Nebrassy or use Orange fox and or Pitch black ..official is broken last time i checked
Sent from my wayne using XDA Labs
Click to expand...
Click to collapse
Of course it is the official one. OMFG twrp-3.4.0-0-jasmine_sprout.img is broken (freezes on the TWRP splash screen), but version 3.3.1 seems to work. That's a relief, so I will try to flash magisk now. Although, I think I will need to do the decryption thing for jasmine first, but I guess I'll follow https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/ mostly
floydsen said:
Of course it is the official one. OMFG twrp-3.4.0-0-jasmine_sprout.img is broken (freezes on the TWRP splash screen), but version 3.3.1 seems to work. That's a relief, so I will try to flash magisk now. Although, I think I will need to do the decryption thing for jasmine first, but I guess I'll follow https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/ mostly
Click to expand...
Click to collapse
jajaja well now you know ...be careful ...some "official" roms are also more buggy than unofficial ones for Jasmine/Wayne..
LOS is an example ..so be forewarned .. if you like android 1 i guess stock rooted is a smart option to keep updates and keep device certified for google stuffs . .
alternativeky go FULL custom rom because stock and custom recovery is just a pain and not worth the hassle on an A/B treble device flashable by fastboot ..just boot the recovery when if ever needed
fyi ..you can flash magisk and it will boot ...if you don't try changing the recovery ..so you can have stock rooted with magisk without rcustom recovery...* recommended by me if you only wamt stock with root
Sent from my wayne using XDA Labs
All good now, thanks for your help! I just flashed Magisk (and also TWRP) and everything works nicely! I will need to get some experience, but I'll keep in mind that I maybe want to get rid of the TWRP recovery. Finally security testing is fun again. Thx!