Hi all, I've been searching online and I haven't found anything that helps or even directly applies, so I broke down and decided to ask for help.
I was working off the guide to root my kindle, install TWRP and then a ROM, first time doing this.
SO let me break down where I'm at:
-rooted
-TWRP installed
-there's no .zip that I can find to stall from (checked sdcard folder and all others)
-can't load into original OS, logo goes from orange to blue on its own, and hangs there
-when plugged into PC, it is recognized but says no drivers are installed for it (no matter how many times i try reinstalling it.)
- I can get it into fastboot mode, but can't seem to load anything (I've read that fastboot doesn't work with twrp)
- adb sideload doesn't seem to work, it cannot find device
So how can I get a .zip file loaded to twrp, or restore the device, without adb seeing the device?
Is there a specific way to install the drives, or a way to get the .zip loaded through fastboot that I'm not aware of?
I'm sorry if this has been addressed before, I haven't seen this exact issue, and the fixes that seem close haven't worked :
thanks guys!
G_G_L said:
Hi all, I've been searching online and I haven't found anything that helps or even directly applies, so I broke down and decided to ask for help.
I was working off the guide to root my kindle, install TWRP and then a ROM, first time doing this.
SO let me break down where I'm at:
-rooted
-TWRP installed
-there's no .zip that I can find to stall from (checked sdcard folder and all others)
-can't load into original OS, logo goes from orange to blue on its own, and hangs there
-when plugged into PC, it is recognized but says no drivers are installed for it (no matter how many times i try reinstalling it.)
- I can get it into fastboot mode, but can't seem to load anything (I've read that fastboot doesn't work with twrp)
- adb sideload doesn't seem to work, it cannot find device
So how can I get a .zip file loaded to twrp, or restore the device, without adb seeing the device?
Is there a specific way to install the drives, or a way to get the .zip loaded through fastboot that I'm not aware of?
I'm sorry if this has been addressed before, I haven't seen this exact issue, and the fixes that seem close haven't worked :
thanks guys!
Click to expand...
Click to collapse
Without a working ADB connection, you can't get a file to your device in TWRP. You can restore your system, recovery, and boot images with fastboot, but your device must be in fastboot mode first. If you decide to do that, you'll have to restore your stock system, recovery and boot images, saved from the 2nd bootloader install instructions, then start the whole process all over again.
soupmagnet said:
Without a working ADB connection, you can't get a file to your device in TWRP. You can restore your system, recovery, and boot images with fastboot, but your device must be in fastboot mode first. If you decide to do that, you'll have to restore your stock system, recovery and boot images, saved from the 2nd bootloader install instructions, then start the whole process all over again.
Click to expand...
Click to collapse
Cheers! Excellent advise! I got it restored to stock!
I used the img files from here: http://forum.xda-developers.com/showthread.php?t=1951254
and followed the fastboot directions here: http://forum.xda-developers.com/showthread.php?t=2277105
now try it again! (and hopefully succeed!)
Hi all,
A few years ago (well when the devices has pretty much just come out), I ran a mod which i found on the XDA website that allowed me to root my partners Xperia T (LT30P),
Everything has been fine until recently, where I've wanted to upgrade the ROM on the phone, but this is where i'm having some major problems.!
Essentially I cant get the phone to boot into either Flash mode (green LED) or Fastboot mode (Blue LED). I've tried the volume down and then connecting the USB cable to my PC (on which the correct drivers are installed via Flashtool). and also the volume up for Fastboot. Neither work. Unsure if the phone has an unlocked bootloader or if that matters (im a Samsung man and used to working with that, so all the Xperia modding is totally new to me... :/
So far ive tried the following:
-Volume down key and plugging into USB port - Result: Phone remains switched off.
-Volume up key pressed in and then plugging into USB port. - Result: Phone remains switched off
-Enabled USB debugging and attempted to boot the phone into flash mode via ADB (Flashtool option). Phone simply reboots.
-Attempted inbuilt software update - Update downloads, but fails at 25% approx when it reboots and attempts the install.
-PC companion equally unsuccessful on my PC, as cant enable flash mode.
I'm totally at a loss at how to flash a fresh complete build (using a ftf file) to the phone without access to flash mode or fastboot mode. Anyone got any idea or know of any tools that might allow me to to completely rebuild the phone so all partitions are present and correct?
One idea i had was to flash a recovery to the phone using FlashR or alike, but cant seem to get it to work either. Flashr looks to install the twrp recovery, but when i attempt to reboot into recovery via Flashr or Rom Manager (another tool i use but not sure if useable on xperia phones?), the phone simply reboots. SOunds like a damaged or wiped partition perhaps?
Anyhoo , any ideas would be welcome guys! Too good a phone to just leave in the drawer
Cheers
Craig.
Cant you flash a boot.img (maybe from cm11 or something) with inbuilt recovery? You can use this for flashing
Ok, I've started writing this reply and lost everything near the end, started freaking out, calmed down and decided to do it again, cause I know what it's like to have a phone that's not behaving as it should. So here goes the shorter-ish version cause I really can't type everything again...
Make sure your volume buttons are working at all (I mean when the phone is booted). They work? good, procced. They don't? we can bypass that, but you, should get them fixed.
Got to this thread and download the latest build of the ROM http://forum.xda-developers.com/xperia-t-v/orig-development/rom-cyanogenmod-12-neo-s-homebuilds-t2984988
Extract the boot.img file from the zip and copy it to the root of your external micro sdcard, NOT IN A FOLDER. If you don't have an sdcard, put in on the internal storage, again, not in a folder.
Root your phone if you haven't. There are plenty of threads on that here on xda
Download an app called Terminal Emulator from the Play Store
Open the app and type su into the prompt.
Grant the app superuser/root access
The following step is the dangerous one where you can seriously break your phone forever. I'm not responsible for anything you mess up. You alone chose to do this
Run the following command in the terminal (be sure that the $ at the end of the line changed to a # (That means you're in root shell, but it's not important))
If you don't have an external sdcard type sdcard0 instead of sdcard1
Code:
dd if=/storage/sdcard1/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/Kernel
Connect the phone to a PC with fastboot drivers installed
Next execute this command and your phone should now boot into fastboot
Code:
reboot bootloader
If a blue LED lights up, you can happily continue flashing kernels and ROMs, if not report back and I'll see if I can help you
Cheers gents. Going to give this a shot tonight. I read last night that some builds out there where you cannot unlock the bootloader (which you can check via service menu)? Is that now bypassable?
crstephenson said:
Cheers gents. Going to give this a shot tonight. I read last night that some builds out there where you cannot unlock the bootloader (which you can check via service menu)? Is that now bypassable?
Click to expand...
Click to collapse
No and it probably never will be. It's hardcoded on the chip. If your phone is bought with a contract binding or it's limited to a single provider, then chances are that you will never be able to unlock the bootloader and flash kernels. It could be that you not being able to get into fastboot is because it's restricted on the device itself [citation needed]. In that case you're screwed and can pretty much forget the whole custom kernel thing. Only ROMs for locked bootloaders
Hello everyone, it's my first time writing here, but I’ve tried everything, searched everywhere, and am desperate for help.
I screwed up big time while trying to flash a custom rom on my nem-l21, as I successfully did before with my xiaomi... So what I did:
I managed to unlock bootloader with dc unlocker. Then I got stucked flashing twrp with adb tools. Everything was looking to be fine, no error messages, “flashing successful”… But, I was never able to boot into flashed twrp. Always got stuck on “your phone has been unlocked blah blah. Your device is booting.” It never booted, not in twrp, nor in stock recovery. I tried different versions of twrp from different sources, always same result (flashing successful, booting into recovery not). Booting into the system was fine. And then I made that horrible mistake. Oh, how I wish I didn’t!!
I read on some website, that you are supposed to flash the twrp as boot.img, not as recovery.img. Seemed illogical and stupid to me, but in the end I tried it. Of course, this just bricked my phone, with no possibility to boot. After hours of googling, installing, trying and crying, I managed in the end to flash back stock boot.img. But at that time, I didn’t know my build number (b359), and I flashed boot.img b351. So now I have a phone which boots into the system b359 with boot.img b351, but with lot of errors.
- developer options, security options, display and factory reset option doesn’t work and just crashes. Therefore I am not able to flash the correct boot.img b359 or anything else at all from pc, no way to enable usb debugging and oem unlocking. Adb devices → nothing. I am able to use fastboot (fastboot devices sees the phone), but when try to flash something, I get error “command not allowed”. Also I can’t enable unknown sources installation, which bothers me a lot. And I can’t make factory reset to restore the crashing settings. Also I can’t change display timeout, and original 30 secs is super annoying.
- I am not able to uninstall even apps installed by me, always just restarts system UI and app stays.
What I tried so far:
- flashing correct boot.img from pc, not working because of dev options crashing
- go into recovery, but stock one is overwritten with unfunctioning twrp, always just get stuck on “your phone was unlocked blah blah… your device is booting now”, but it never does, have to hard reboot
- go into huawei erecovery, which is working, but when I try to resolve problem from there, always ends up with errors and crashes
- connect to pc and use HiSuite, system recovery tool here always says “no problem detected”
- updating to b361 through system update settings, always crashes on 5% and sends phone into “your phone was unlocked blah blah… your device is booting now” error
- downloading the proper b359 as and update.app file, put it in dload internal storage → same error during update, put it in dload sdcard → same error, no matter which way I use to start the update
- boot into twrp or stock recovery.img through fastboot without actually flashing it, anyway error “command not allowed”
- do factory reset or update through dial codes (i.e. *#*#123456#*#* …), nothing worked
My pc is windows 10, all drivers up to date. Using powershell as an admin. Am an idiot for not making backup of the phone before I started...
So, now I have more or less functioning phone, but I can’t uninstall any apps at all, can’t install from unknown sources, can’t do nothing from pc, can’t make any update, and lot of important settings keep crashing.
I can use the phone like this, but if somebody could think about some solution for this ****ed up situation I got myself into, I would be grateful to him/her for the rest of my life.
Sorry for a long post.
Thank you in advance and have a nice day
I think using Hisuit will help. Enter Fastboot and connect ur phone to ur computer and use system recovery toll
Hello there.
Just like title says - I've got my hands on new Redmi 9 (lancelot) nfc 4/64 version. I've unlocked it from Mi stuff successfully yesterday and wanted to install there twrp, magisk and titanium backup to clean a bit and maybe to have foundations for further change of rom.
However, my phone gaves answers, that I do not understand correctly.
Firstly - after first instalation of twrp via adb it booted into this. However, after choosing option to boot to system from it, power off via ui and then another try to enter recovery...it gave me stock miui recovery again. When I've tried the same steps for second time, phone finished, but after restart it entered bootloop. I've followed steps from this guide - https://miui.blog/redmi-9/download-install-twrp-and-root-redmi-9-codename-lancelot/
After some time I've managed to make low-level rom instalation again (12.0.4 official lancelot rom, dated 31st of Mar, 21) to at least being able to communicate with it (done with usage of miflash 2018 version and rom in *.tgz file). This time, I've used help from this page - https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/ - had some troubles with mediatek based phones before in my life, so it wasn't from scratch, but some time to understand it were needed.
Phone is working again, but this rom is based on Android 10 (which I would like to keep, if it won't cause too much trouble). And I think because of that fastboot mode changed now into fastbootD mode, where old commands from adb does not recognize the device, thus no flashing recovery action etc can be taken.
Is there a workaround here? I've stumbled across some articles about installing clean Generic System Image with Android 10 on this phone (since it has been released with android greater, than number 8), but again - this requires to have custom recovery, prefeably twrp. I cannot do anything about it, because I got back to stock recovery (which now at least works, yesterday phone was so twisted at one point, that he cannot even load this recovery, but somehow managed to open system and fastboot modes normally (!!!)).
Is there a way to work it out? Older miui version, older android version, then twrp, then update via twrp? Or an alternative method, since google changed something in partitions again (not sure, if I get it right, but it might be it)? I would actually like to stay somewhere around miui (at least let it be official with ota support without too much issues), but without twrp I cannot do anything. I also do know, that there aren't any official twrp/pbrp yet (just betas). Could it also be the issue with troubles with installing it and staying it on the phone?
buczek0711 said:
Hello there.
Just like title says - I've got my hands on new Redmi 9 (lancelot) nfc 4/64 version. I've unlocked it from Mi stuff successfully yesterday and wanted to install there twrp, magisk and titanium backup to clean a bit and maybe to have foundations for further change of rom.
However, my phone gaves answers, that I do not understand correctly.
Firstly - after first instalation of twrp via adb it booted into this. However, after choosing option to boot to system from it, power off via ui and then another try to enter recovery...it gave me stock miui recovery again. When I've tried the same steps for second time, phone finished, but after restart it entered bootloop. I've followed steps from this guide - https://miui.blog/redmi-9/download-install-twrp-and-root-redmi-9-codename-lancelot/
After some time I've managed to make low-level rom instalation again (12.0.4 official lancelot rom, dated 31st of Mar, 21) to at least being able to communicate with it (done with usage of miflash 2018 version and rom in *.tgz file). This time, I've used help from this page - https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/ - had some troubles with mediatek based phones before in my life, so it wasn't from scratch, but some time to understand it were needed.
Phone is working again, but this rom is based on Android 10 (which I would like to keep, if it won't cause too much trouble). And I think because of that fastboot mode changed now into fastbootD mode, where old commands from adb does not recognize the device, thus no flashing recovery action etc can be taken.
Is there a workaround here? I've stumbled across some articles about installing clean Generic System Image with Android 10 on this phone (since it has been released with android greater, than number 8), but again - this requires to have custom recovery, prefeably twrp. I cannot do anything about it, because I got back to stock recovery (which now at least works, yesterday phone was so twisted at one point, that he cannot even load this recovery, but somehow managed to open system and fastboot modes normally (!!!)).
Is there a way to work it out? Older miui version, older android version, then twrp, then update via twrp? Or an alternative method, since google changed something in partitions again (not sure, if I get it right, but it might be it)? I would actually like to stay somewhere around miui (at least let it be official with ota support without too much issues), but without twrp I cannot do anything. I also do know, that there aren't any official twrp/pbrp yet (just betas). Could it also be the issue with troubles with installing it and staying it on the phone?
Click to expand...
Click to collapse
After to flash TWRP you have to flash the vbmeta.img and then boot to TWRP not through commands but manually with hardware buttons, don't allow device to boot to system before to boot to custom recovery otherwise this will be overwritten again.
I've done that with this vbmeta, one and only difference might be that I was trying to get into twrp by commands (however, it did not work XD). Overwritten isn't an issue in my opinion, since I do have booted to recovery after installing it yesterday and then from it choose option "reboot to system". After poweroff from system and then trying to get into recovery, then stock showed.
I'm currently trying this - https://c.mi.com/oc/thread-3312019-1-0.html
After putting this command to cmd - bcdedit /set testsigning on lancelot shows somewhere, but I cannot install it (most likely due to this issue about encrypted drivers). I'll try to overcome it now.
Yea, well, I've tried this method from link listed above, phone still enters fastbootd mode, still is not-visible from cmd started from google platform tools folder (which a subfolder to working adb). Not sure what to do now.
buczek0711 said:
I've done that with this vbmeta, one and only difference might be that I was trying to get into twrp by commands (however, it did not work XD). Overwritten isn't an issue in my opinion, since I do have booted to recovery after installing it yesterday and then from it choose option "reboot to system". After poweroff from system and then trying to get into recovery, then stock showed.
I'm currently trying this - https://c.mi.com/oc/thread-3312019-1-0.html
After putting this command to cmd - bcdedit /set testsigning on lancelot shows somewhere, but I cannot install it (most likely due to this issue about encrypted drivers). I'll try to overcome it now.
Click to expand...
Click to collapse
No, this is not the method to boot to recovery from what I pointed out, you don't have to firstly power off device but from fastboot commands you can type either fastboot or fastbootd reboot and inmediately press the volume up till the TWRP logo appears, the fastboot/d command will act same as it be the power button.
The thread explains how to install unsigned drivers in Windows, not to set it on your Redmi but is for your PC. If you succesfully get the drivers installed then you have to reboot your PC entering again in safe mode (not normal mode) and from there the commands through fastbootd are generally the same than those for fastboot.
buczek0711 said:
Yea, well, I've tried this method from link listed above, phone still enters fastbootd mode, still is not-visible from cmd started from google platform tools folder (which a subfolder to working adb). Not sure what to do now.
Click to expand...
Click to collapse
Just to be sure you are doing fine and not missing something the adb commands work while device is on and fastboot/d commands work only in fastboot mode.
Can you attach some SS to see what you are typing and the error that brings the cmd?
Hm, you say, that I can type fastbootd into cmd and this will be recognised? It seems that it cannot be recognised in this case, when I'm trying to type fastbootd powershell says "unknown command".
Typing fastboot /d devices results in "waiting for device", despite phone being in fastbootd all the time.
I'll attach ss tomorrow - it is time to sleep for me now, gotta wake up early. Then we will also know something else, when it comes to behavior after restart pc (once again, I've done it all in one sit, it might be an issue here).
PS. if you want english errors, I'll have to use powershell - cmd is in my native language (polish). Found out, that it doesn't really matter, which program you use, powershell simply can do more, while cmd dates back 30 years or so.
Anyway - phone is still booting to miui 12 and android 10 normally, I do not set there google acc or lock yet, so don't know if there's any issue with it (most likely no).
I've also stumbled across some dude from indonesia, who had the same phone, miui 12.0.1 with android 10 and he installed successfully twrp, then magisk, but he also put some small img - misc misc.img. Could it be the issue?
I'm giving link to this material on YT -
FROM WHAT I SEE IN THE THUMBNAIL, this version of twrp is even the same (code number and english translated from chinese), that once worked here (md5 of the file might be different, though).
There's also an option to reinstall again whole adb, platform tools, drivers from official miunlock app etc, but since I do not had ANY android-related problems on this pc with previous phones, I'm not sure if this is worth our time.
And I think that if I would misspell something in cmd program would give me error instantly, instead of behaving like it was nothing - i've made tons of errors before and cmd/powershell always informed me about it in first line of their texts.
buczek0711 said:
Hm, you say, that I can type fastbootd into cmd and this will be recognised? It seems that it cannot be recognised in this case, when I'm trying to type fastbootd powershell says "unknown command".
Typing fastboot /d devices results in "waiting for device", despite phone being in fastbootd all the time.
Click to expand...
Click to collapse
Yes, fastboot works normally while in cmd, this is intended for that, no problem to enter firstly toi Power Shell but you can switch to cmd from PS just typing cmd and all the commands from here will be for cmd, doesn´t matter at all how many old is, cmd can work inside PS keeping the same aspect.
buczek0711 said:
I'll attach ss tomorrow - it is time to sleep for me now, gotta wake up early. Then we will also know something else, when it comes to behavior after restart pc (once again, I've done it all in one sit, it might be an issue here).
PS. if you want english errors, I'll have to use powershell - cmd is in my native language (polish). Found out, that it doesn't really matter, which program you use, powershell simply can do more, while cmd dates back 30 years or so.
Anyway - phone is still booting to miui 12 and android 10 normally, I do not set there google acc or lock yet, so don't know if there's any issue with it (most likely no).
I've also stumbled across some dude from indonesia, who had the same phone, miui 12.0.1 with android 10 and he installed successfully twrp, then magisk, but he also put some small img - misc misc.img. Could it be the issue?
I'm giving link to this material on YT -
FROM WHAT I SEE IN THE THUMBNAIL, this version of twrp is even the same (code number and english translated from chinese), that once worked here (md5 of the file might be different, though).
There's also an option to reinstall again whole adb, platform tools, drivers from official miunlock app etc, but since I do not had ANY android-related problems on this pc with previous phones, I'm not sure if this is worth our time.
And I think that if I would misspell something in cmd program would give me error instantly, instead of behaving like it was nothing - i've made tons of errors before and cmd/powershell always informed me about it in first line of their texts.
Click to expand...
Click to collapse
You don't need to reinstall nothing, just from the downloaded SDK platform do all that you want to avoid misspelling path and folder directories, I mean place the files you need to use in the same directory and open terminal prompt (PS) in the same folder where adb/fastboot binaries are, pressing right mouse button and shift at same time.
I feel you are missing something simply here, not so hard to do.
The misc.img partition that you mentioned is just to restore something that went wrong in the process.
But if you are happy with this Miui ROM then great. No hurry to answer that, give your time to rest.
I also feel, that there is something simply to overcome, Only the fastbootd is new Stuff to me. However, any time I was doing something with Snap, i was long after finish by the current time (almost a month with It and 3rd day with fastbootd issue).
I don't get it. Now when I've tried to enter fastboot mode...phone entered it (fastboot, not fastbootD). Then I've installed pitch black recovery and sucessfully booted into it by restarting phone and then pressing vol up. Now I'm trying with magisk and another entry to pbrp.
Second try gave me stock recovery again. What is wrong with it XD?
something is wrong. Installing twrp resulting in nothing (stock recovery is still there), installing pitch black resulting in successfully boot into new recovery. However, this recovery does not see any zip (magisk zip, to be exact, that I've put there before it to root phone). After boot into system and then power it off to boot into recovery...phone boots into stock recovery. Should I downgrade system to miui 11 to be able to get over it? Or should I wait until miui 12.5 enters redmi 9?
My tries of installing it has been done by using cmd with admin rights, if it does make any difference.
buczek0711 said:
something is wrong. Installing twrp resulting in nothing (stock recovery is still there), installing pitch black resulting in successfully boot into new recovery. However, this recovery does not see any zip (magisk zip, to be exact, that I've put there before it to root phone). After boot into system and then power it off to boot into recovery...phone boots into stock recovery. Should I downgrade system to miui 11 to be able to get over it? Or should I wait until miui 12.5 enters redmi 9?
My tries of installing it has been done by using cmd with admin rights, if it does make any difference.
Click to expand...
Click to collapse
I think you are not following the right direction, if you want consider what I pointed out; you don't have to power off device prior to boot to recovery for first time but you have to type from fastboot (no matter fastbootd) and inmediately from there boot to the custom recovery, when you succesfully booted to custom recovery then flash the recovery zip if there is one (PBR and OFR have one) and if not a zip then flash the image again to the recovery partition, also check if there is some installer apart from the image that can fix it in the ramdisk partition, at this point your issue is solved, next step is to reboot device to system normally, if you don't have any issue on that then OK but if you can´t there some steps more that you should do, but let this for last.
Ok, let's group it.
I do not think that particular matter of how do I restart phone matters here (at least, I do not believe it, that it does anything).
Option to restart to recovery from adb still not working.
Trying to find magisk.zip in main directory of internal storage still fails under pitch black recovery project.
From new stuff - I now got an error message, while opening pbrp, most likely with the issues about system being read-only (not sure though, since I do not remember it now, might look into it once more). I have the options to mount partitions, available from main menu, but since I do not used it at all before, I do not know, how to deal with it.
Also - my system boots normally, it must have overwritten recovery (or at least header of it) sometime during boot, since custom recovery is unavailable to access after first full reboot.
I'll try now to install newer version of twrp from yt that I've posted days back. I would also try with orange fox (however, i cannot find img for it, just source code, don't get it).
Is there someone, who can and will to help me?
Situation looks this - on this 12.0.4 MIUI with android 10 I'm unable to install ANY recovery (either phone do not restart to recovery after proper command from cmd or it boots into it, but after visiting system and then to recovery again it shows stock (even without any operations or updates from ota).
I cannot force to work either twrp 3.4.2b, twrp 3.5.2, pitch black recovery 3.0.0 beta.
After trying to install magisk 21.4 zip from twrp 3.4.2b phone entered bootloop, because f**k you, user, I cannot even get it to fastboot mode now (btw, fastboot now works, fastbootD is luckily a long-gone crap).
All cmd's have been run with admin rights. There are NO SUCH THING, as misspelling (cmd and adb would not execute command ,if it is misspelled, either command or filename). I've installed drivers once again and used cmd from dedicated folder with adb fastboot portable version (runned as admin, of course).
Now I'm downloading older version of rom for fastboot (miui 11.0.9) with android 10. Something has to finally work on this piece of junk.
Writting each time is success (cmd says "OKAY" nad displays time, it took to do so), downloading recovery image to start from it also works, there aren't any errors in cmd, yet phone still isn't working.
Where's the issue with it? Apart from being mediatek, which seems to somehow enormously hardened any flashing? I did not encounter anything like this with qualcomm, yet mediatek still manages to pisses me off with their really weird implementations and working (???) of their stuff.
another update from battlefield. Managed to finally get mediatek verify bypass in smart phone flashing tool, however it ended with forcing me to format anything in the phone (if not, program would not let me install anything).
Second problem is forcing me to disable verify, yet command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img put in fastboot mode (yes, it works now) does not work, because adb says, that "--disable-verity" is not a recognised command.
SPFT cannot properly download images from phone and welcomes me with error about download exception, happening either in recovery part or in boot part. SInce I do have access to fastboot now, I can overcome it (I think).
Old miflash tool to install roms via fastboot says it cannot flash rom in locked stage (I might have lost unlocked status, but I'm not sure about it). Do you know ways to overcome it?
It is me again (inb4 use edit). Had to unlock phone again by using miphone unlocker (it went ok). Still cannot flash using SPFT, miflash started showing idiotic errors like "no file in directory" or "cannot access to directory" (it could before, I did not changed name of it). Will continue reporting of progress (or the so-called "progress").