Today i got notification for available update to miui 13 (cn version) after download it asked for reboot to install and i ended up stuck at boot logo for 45min.
I can boot in safe mode,i tried reinstalling rom in recovery ending up with same result. I even tried downgrading to miui12 but i got error saying it cant downgrade.
Is there a way to get back to version 12 without loosing all my data or even making version13 work. Please help.
Im using china version since day 1 and this is only problem i had with it.
Download the latest A12 stock cn recovery ROM and flash it or fastboot latest stock fastboot ROM. You can't downgrade stock, I'm sure it won't let you. mifirm.net will have all the ROMs, fastboot and Recovery.
which option lets me keep my data,tried recovery flash, same thing
Related
Hello,
I tried to flash some stock 9.0.0 firmware on my P20 pro and now I have some weird bootloop.
When I boot up my device I get a flash for a second full of random colors and then the device starts to boot up.
Devices boots up normally but after one minute of using the device it gets in to reboot.
I have my backup from 8.1.0.0 via TWRP but now my TWRP encrypts all data, I tried several TWRP and on every TWRP data are encrypted.
My question guys:
Can I flash ROM from fastboot because this is the only thing that I can do?
I have even tried to go to eRecovery (i managed to flash stock recovery) and when I want to download stock ROM from recovery it says that I have no packages available for download.
Please Help !!
I switch my cc9 from chinese rom to global rom using fastboot (pyxis_global_images_V11.0.1.0.QFCMIXM_20200309) few month earlier. It was going smooth and suddenly it got hang 1 week earlier and after i restart it stuck in MI logo.
Then I flash it with pyxis_global_images_V11.0.3.0.QFCMIXM_20200610. (latest version). After flash my device start getting hang very frequently and release automatically after few seconds. I thought the latest version is not working properly.
So I decided to go to earlier version pyxis_global_images_V10.3.1.0.PFCMIXM_20190911. But it got error during flash process.
After that I'm unable to flash with any rom. It shows "FAILEDremote: Check device console.)" during the flash.
What can I do now?
Restore it to the factory state
flash official fastboot rom with miflash
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
ajadamjones87 said:
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
Click to expand...
Click to collapse
your devices is encrypted try flash other custom rom first then try revert to stock hope it help u out
Thanks very much for your response. Based on your advice i tried to flash the latest Kraken 11 Vanilla rom from this fourm, however after installing via TWRP now i can't even get into recovery anymore, just goes straight to fastboot.
Any other suggestions please?
I have now managed to get back in to TWRP and tried flashing lineage latest rom but still i am stuck in a boot loop taking me to fastboot this time.
Please can someone help suggest hwo i can get my phone working agian. At this point i dont care which rom i end up (custom or stock) with as long as i can get it to function again
If your device is rooted, you can NOT update the system using the OTA (over-the-air), or the device will be stucked in bootloop.
If your device is rooted, you need to update the system MANUALLY, using the fastboot or spflashtool.
I suggest to update the system using the fastboot.
Now, you need to flash the whole MIUI again, except userdata and you will have your device back.
For anyone with a asimilar problem i eventually managed to fix my issue by using miflash tool version 20180528 and flashing merlin_eea_global_images_V12.0.10.0.QJOEUXM_20210413.0000.00_10.0_eea_c4a9d5d7fc fastboot version which i downloaded from the xiami site.
I had to try this multiple times because the extraction of the file did not seem to be correct on the first attempts.
It all started 1 month ago when my phone stopped working for 3 days, then went really slow.
Luckily I had the time to unlock it and I started trying to fix it today, but it won't work.
I tried to flash it with the latest EEA Rom on the MiFlash tool (succeed, but then it bootloop).
I also tried to flash it in recovery mod with OrangeFox but again it doesn't change anything
Btw phone is a Redmi Note 9 PRO (idk if the PRO does change anything)
Could you be more specific?
What did you unlock? Bootloader? Did you root the bootloader after?
Is it the correct rom for your device ( I know little of EU/EEA variants (I believe your choice here may be wrong) )
If you flash recovery then reboot into recovery, and it's still stock, you are using an unrooted bootloader.
Hello, thanks for the answer
This is hard to be specific as I've tried countless things and every one of them lead to others countless things not working either.
So yueah I unlocked the bootloader, and I think I'm in root already because when I try to install magisk via orangefox I get the following error
Error installing zip file '/sdcard/MAGISK/Magisk-v23.0.zip'​Which I believe tell that there is already another program rooting the bootloader.
About the ROM, I've tried severals of them, Global, EU, EEA, with Fastboot or Recovery, with different android version
Latest I've tried was :
joyeuse_eea_global_images_V12.0.4.0.QJZEUXM_20210423.0000.00_10.0_eea_8b93dea9fd
Then success, and bootloop
(Either the installation complete and nothing work, either the installation doesn't complete and I have to lookup for 1H30 where is it coming from)
how do I know if it's still stock after rebooting into recovery ?
Thanks a lot
Hi
A few months ago I was able to flash on angelica lineage-17.1-20210326-UNOFFICIAL-angelica.zip and this worked well. Yesterday I tried to flash the s same image again and after several attempts I get a black backlit screen when lineage is meant to start. I reflash stock _V12.0.10.0.QCRMIXM then a recovery - PBRP 3.0.1. From there I was having issue
What is the flashing process for an unlocked device that has something like TWRP/Pitch Back/Orange Fox installed?
I guess once you unlock and can flash the recover you use the recover to flash the zip, then reboot and flash magisk.zip and everything should work? Or is there some step missing.
I had this problem too with the google pixel 7 pro. Can't help ya there on that one. I even tried re installing older firmware and it still didn't work. Maybe the bootloader is permanetly downgradable but the firmware of the stock is. Just a guess. Lineage os 20 is an unofficial build at the moment that receives hardly any updates.