Related
I install latest TWRP 3.1.0 version today.
All the user data, some apps (Waze, Gmail, Gmaps...), SMS were wiped.
I have RR-N-v5.8.2-20170218-oneplus3t-Official currently installed.
I reinstall some apps back.
After system reboot all seemed fine.... But after boot to recovery (TWRP 3.1) and than boot into system all was gone again.
It looks like every boot to recovery wipes user data and some apps...
Flash 3.0.4-1 again
Same problem here with 3.1.0.0.
I flashed 3.1.0.0 img with 3.0.4-1 and do not have the issues OP is describing.
Edit: stock Open Beta 3 rooted.
sossio18 said:
Flash 3.0.4-1 again
Click to expand...
Click to collapse
I did... and restore system from backup BUT some userdata is gone forever...
Apparently, the official TWRP 3.1.0-0 for OnePlus 3T only works with Oxygen OS. So far, only users using custom ROMs have reported issues with partition wipes after flashing the latest TWRP.
Anova's Origin said:
Apparently, the official TWRP 3.1.0-0 for OnePlus 3T only works with Oxygen OS. So far, only users using custom ROMs have reported issues with partition wipes after flashing the latest TWRP.
Click to expand...
Click to collapse
Happened to me on OOS. Went back to 3.0.4-1
Sent from my OnePlus 3T using XDA Labs
It was updated to 3.1.0-1 try that
I suppose this of because of the official TWRP 3.1.0-0 is not using the backported F2FS driver. I'm using EXT4 filesystem on data partition so therefore I'm not experiencing any data loss.
Was on RR 09.03 with OB3 firmware, it completely destroyed my phone. Bootloops, impossible to go back to recovery, when in recovery, impossible to see files to flash them, even going back to 3.0.4.1 did not solve everything, reinstalled Freedom OS but had screen total freezes.... Had to go through the total disaster recovery utility, and I am still re-installing everything...
TWRP 3.1.0.0 ate 4 hours of my flash-addicted life... FML !!!
**STAY AWAY FOR NOW**
Blu_spark 3.1.0 version is not affected by this, only the official.
Stock OOS 4.0.3 and TWRP 3.1.0-1 = ALL GOOD!
Kjaups said:
Stock OOS 4.0.3 and TWRP 3.1.0-1 = ALL GOOD!
Click to expand...
Click to collapse
Can confirm. TWRP 3.1.0-1 works fine. (rooted OOS 4.0.2)
I had at least two serious issues with official TWRP 3.1.0-1 and LineageOS:
1.) After a first flash attempt via fastboot I was no longer able to unlock my phone with my PIN under LineageOS.
2.) When booting into TWRP I got a black screen - unable to do any useful.
3.) After I could no longer unlock my phone under LineageOS I reinstalled LineageOS from TWRP 3.1.0-1. All looked fine until I rebooted from TWRP into LineageOS: TWRP obviously wiped my device and I was offered
the setup wizzard of LineageOS. All my setting were gone.
I had issue 3.) already with TWRP 3.0.3-1. I immediately reflashed TWRP 3.0.4-1 - the currently only working TWRP version.
I would like to add that I had removed any encryption on the phone before I started at 1.). My device is still unencrypted. I once removed stock encryption because I heard about problems with TWRP and encryption.
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Did you tried another recovery? Try Batik Recovery!
Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.
Amir_espie said:
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.
Click to expand...
Click to collapse
Sure,will give it a go
An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys
Solved Magisk Error!
I've been using Pixys OS on my Redmi 4A and it works fine smoothly. I recommended to clean wipe before installing. Android Pie us amazing and I've installed stable version. Do backup before clean wipe.
For Magisk I recommended this: https://freaksterism.blogspot.com/2018/10/solved-cannot-mount-vendor-magisk.html?m=1
It worked for me. Also go through this step before any custom ROM. Do let me know the status
Anirudh15 said:
An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys
Click to expand...
Click to collapse
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.
You have two problems.
Anirudh15 said:
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
You need to flash the twrp separated vendor version by my friend Offain https://androidfilehost.com/?fid=962187416754475993
The other problem with the decryption:
You must enter in the twrp press wipe and format data. Type yes and then reboot into twrp again. After that flash the rom and gapps and you will not have the decryption problem again
Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
I had the same problem. Its because your phone is encrypted. The only solution I found is to boot the device into fastboot and using command: [fastboot format userdata] on PC. This will wipe all data off your phone so do backup. It removes encryption and now you can install any custom rom.
Decrypt ur phone first then flash, use twrp vendor
athish said:
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.
Click to expand...
Click to collapse
Format Data was the only thing that worked for me. First backup everything on your mass storage.
Hey guys I was wondering something I haven't installed the latest update yet and my phone is rooted and has TWRP on it soo not sure if i can just update with all that or like i should restore the phone to its original state then update
Last version of TWRP I tried (3.4.0-0) did not work properly with Android 10, don't know about the new 3.4.0-1 because I switched to OrangeFox which can decrypt Android 10 without issues.
As for the update process, you need to get the Recovery ROM update package, you can download it from the official xiaomi site, put it, Magisk and your kernel if you use a custom one either on the phone's internal storage or even better your SD card and flash from recovery in this order:
1. ROM
2. Kernel
3. Magisk
4. Wipe Dalvik\cache
5. Reboot to system
I did it exactly like this a few times now, granted it was with xiaomi.eu instead of stock but the process should be the same.
This should just update the phone without wiping anything and with maintaining root, just make sure to do it from a recovery that can decrypt the phone.
Maranex said:
Last version of TWRP I tried (3.4.0-0) did not work properly with Android 10, don't know about the new 3.4.0-1 because I switched to OrangeFox which can decrypt Android 10 without issues.
As for the update process, you need to get the Recovery ROM update package, you can download it from the official xiaomi site, put it, Magisk and your kernel if you use a custom one either on the phone's internal storage or even better your SD card and flash from recovery in this order:
1. ROM
2. Kernel
3. Magisk
4. Wipe Dalvik\cache
5. Reboot to system
I did it exactly like this a few times now, granted it was with xiaomi.eu instead of stock but the process should be the same.
This should just update the phone without wiping anything and with maintaining root, just make sure to do it from a recovery that can decrypt the phone.
Click to expand...
Click to collapse
Well I have a few questions
By recovery ROM you mean from here https://c.mi.com//miuidownload/detail?device=1900376 the full ROM? like I just flash the ROM file using TWRP well OrangeFox version right and it will keep all my apps and data
Yes, you flash the rom from mi.com.
Don't "just" flash it or you'll loose root and OrangeFox, flash in this order:
1. ROM
2. Kernel
3. OrangeFox (I added this step because you are on official MIUI and the update will replace your custom recovery unless you re-flash it after the rom.)
4. Magisk
5. Wipe Dalvik\cache
6. Reboot to system
Before flashing make sure you are flashing the right rom for your variant and region.
Other than that, you should be good, I updated like this three times and had no data loss.
Hello, I have a weird issue with my note 10 pro where after I install any rom it just refuses to mount any storage, and the phone's internal storage stops showing up on my pc when I'm in any recovery mode. I've tried TWRP and OrangeFox, tried Pixel Experience Plus and now Octavi OS. I've also tried flashing this forced encryption disabler (link https://forum.xda-developers.com/t/...disk-quota-disabler-11-2-2020.3817389/page-65), at first it kept failing telling me it failed to mount, however after I rebooted the recovery it actually flashed. Despite that my phone is still encrypted.
Luckily I managed to flash magisk before booting into the custom rom for the first time so it actually flashed, but I can't flash anything else.
Has anyone else experienced this bug? I just want to be able to flash stuff.
note: I've tried with and without a password or a pin, and tried both TWRP and OrangeFox. They just never ask for any authentication.
is your phone storage showing 0 in recovery?
The available version of OrangeFox does NOT support data partition decryption, because of that nobody uses it on our phone ...
What is the version of the TWRP you use?
lubo777 said:
The available version of OrangeFox does NOT support data partition decryption, because of that nobody uses it on our phone ...
What is the version of the TWRP you use?
Click to expand...
Click to collapse
this one
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
I was using pixel experience ROM for some time and I tried to update to the latest plus edition. The installation guide recommended full format data and flashing. I did as instructed. Now I'm stuck in booting into TWRP recovery. I looked up a few kinds of stuff and none of them worked. Is anyone else facing the same problem? has anyone got a working fix? I tried removing the TWRP folder, re-flashing TWRP with TWRP and orange fox recover, and then flashing ROM. non helped. got a broken phone now any help is appreciated.
basukala said:
I was using pixel experience ROM for some time and I tried to update to the latest plus edition. The installation guide recommended full format data and flashing. I did as instructed. Now I'm stuck in booting into TWRP recovery. I looked up a few kinds of stuff and none of them worked. Is anyone else facing the same problem? has anyone got a working fix? I tried removing the TWRP folder, re-flashing TWRP with TWRP and orange fox recover, and then flashing ROM. non helped. got a broken phone now any help is appreciated.
Click to expand...
Click to collapse
Use the correct TWRP if the rom is in A11 use A11 TWRP etc..
https://androidfilehost.com/?w=files&flid=318260
Twrp/wipe/format data write yes reboot Twrp/flash rom.
what do you mean by rom is in A11? I have redmi k20 pro raphael phone. I am using twrp for raphael code name.
basukala said:
what do you mean by rom is in A11? I have redmi k20 pro raphael phone. I am using twrp for raphael code name.
Click to expand...
Click to collapse
AOSP roms can be under ANDROID 11 or 12 or 13.
PixelExperience
Android OS version: 11.0.0_r40
The first version is in A11 and since August in A12
Version: 12
File name: PixelExperience_raphael-12.1-20220820-1826-OFFICIAL.zip
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
basukala said:
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
Click to expand...
Click to collapse
Do you use this TWRP?
twrp-3.6.2_9-0-raphael-TeamWin.imgTwrp
wipe/format data write yes reboot twrp
flash the rom
Use this O.F https://androidfilehost.com/?fid=15664248565197208249
basukala said:
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
NOSS8 said:
Do you use this TWRP?
twrp-3.6.2_9-0-raphael-TeamWin.imgTwrp
wipe/format data write yes reboot twrp
flash the rom
Click to expand...
Click to collapse
Wipe everything, system, vendor, internal storage, dalvik, cache via advanced wipe, then flash firmware and vendor or if your rom has included firmware then just flash the rom directly. Try to boot into OS if it still bring back to twrp then again repeat the above steps and this time flash stock vendor and firmware from mi website and try to boot into OS.
Click to expand...
Click to collapse
All the best
yes using the team win version of TWRP. Used Orange Fox recovery. ( nice look and feel and features btw). But they didn't work either. What could I try more? Could I be able to revert back to MIUI stock ROM ? let me know if you have good resources. Thank you very much for your time and efforts
basukala said:
yes using the team win version of TWRP. Used Orange Fox recovery. ( nice look and feel and features btw). But they didn't work either. What could I try more? Could I be able to revert back to MIUI stock ROM ? let me know if you have good resources. Thank you very much for your time and efforts
Click to expand...
Click to collapse
Back to MIUI
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
flashed stock miui rom for now. Will tap into pixel rom in few days.
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
basukala said:
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
Click to expand...
Click to collapse
Xiaomi has stopped updating on Android version 11.
Which rom do you want to install?
basukala said:
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
Click to expand...
Click to collapse
Why bothering to manually search here and there for official ROMs
Install the app:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
and the app will show you links to download the latest Global, EEA, etc, zip/recovery or tgz/fastboot, or you can scroll through the older versions and pick an older if you wish
Btw, latest are MIUI 12.5, A11 - there are no official A12 ROMs for Mi 9/Redmi K20 line of models
Even if they receive MIUI 13, it will be (for some already released, but eg China only, etc) it will be A11
Same issue, I guess this is it for me. Time to buy a new phone rather than accidentally losing data from time to time with custom ROMs. I wonder if they didn't know such issue exists before releasing it to the public.