Database Develop

[GUIDE][EUI][Coolpad Cool 1][TWRP/Root] Easy TWRP/Root Using QFIL for EUI

Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks mate. Is 5here any custom rom for it ?

bouyhy01 said:
Thanks mate. Is 5here any custom rom for it ?
Click to expand...
Click to collapse
You can try this : https://forum.xda-developers.com/android/development/rom-jui-rom-vr12-cuoco92-t3780509#post76380258

can i use this method to leere le 3?

itsmeyukiedcqii said:
can i use this method to leere le 3?
Click to expand...
Click to collapse
I don't have that device but you can always try and let us all know.

Aplication cant download any files. Allways exit downloading

Τhe device model is R116 (not c103 or C106) Any tool that works with this model?? Qfil, Miflash, Coolpad download assistant didn't do the job. And ADB commands cant see it either.

Does this require formatting data?

Maybe yes i dont know.

Can we just do fastboot oem unlock and flash twrp?

Case closed. Recycle bin gave the solution.

Hi my device is showing as an "Unknown Device". I have installed all the drivers which are available accross the web. Please suggest me...

Anas Rahman said:
Can we just do fastboot oem unlock and flash twrp?
Click to expand...
Click to collapse
No you can't. I hope we can. I tried it and it doesn't work. Our device just don't recognize adb command.

I have a problem when i try to install recovery via QFIL ..... please help me???
Code:
Download Fail:Sahara Fail:QSaharaServerFail:Processfail

tanks for you
vulturext said:
Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
Click to expand...
Click to collapse
Request for these files
boot1.bin
boot2.bin
main.bin (user data main.bin)
Please

ghasem.hf said:
Request for these files
boot1.bin
boot2.bin
main.bin (user data main.bin)
Please
Click to expand...
Click to collapse
Nobody help
I am waiting

Quote:
Originally Posted by vulturext
Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
Click to expand...
Click to collapse
After doing that,
when I enter in recovery mode, it just show 2 options:
Update system
or
Clear data
What should I do

twrp internal storage 0mb coolpad c103 how to fix?
Hello,
I did all the procedures. But it can't install SuperSU. And it shows internal storage 0 mb. Then I rebooted the phone. And I rebooted the phone again in recovery mode but this time it gives me just two options format or update. Can someone please tell me how to solve this issue? Please.
Thank you.

cunhaandre said:
Hello,
I did all the procedures. But it can't install SuperSU. And it shows internal storage 0 mb. Then I rebooted the phone. And I rebooted the phone again in recovery mode but this time it gives me just two options format or update. Can someone please tell me how to solve this issue? Please.
Thank you.
Click to expand...
Click to collapse
Why not try magisk?
I'm not sure but your internal is 0mb because TWRP isn't able to decrypt your data partition. I don't use this phone but I have the same problem with my phone, what I did is that I flashed a zip which unencrypts the data and then formatted my internal storage it works fine after that
You can Try backing up your data and formatting your internal storage after flashing magisk

Anas Rahman said:
Why not try magisk?
I'm not sure but your internal is 0mb because TWRP isn't able to decrypt your data partition. I don't use this phone but I have the same problem with my phone, what I did is that I flashed a zip which unencrypts the data and then formatted my internal storage it works fine after that
You can Try backing up your data and formatting your internal storage after flashing magisk
Click to expand...
Click to collapse
Hello,
thank you for your reply, I already solved the issue. I did all the things again, and then I formated internal storage and become normal, then I transferred the ROM via mtp and flashed it. All is fine now.
Thank you

[GUIDE][9.0][ROLLBACK] Complete Guide to Upgrade to Android 9 From JUI or Nougat ROM

Today I will make a guide as complete as possible to guide new user into flashing custom ROM for their Coolpad Cool 1 Dual. This guide as far as I can tell is usable for all C103, C106 and R116 version.
Introduction :
So our device finally got Android 9 in custom ROM development. Unfortunately, to flash Android 9 you need to be on EUI Android 6 Marshmallow. For those who are already on Android 7 you need to rollback to stock EUI to upgrade to Android 9 or else your device wouldn't boot or stuck in bootloop even with full wipe in TWRP.
Preparations :
1. Microsoft .NET Framework 4.7.1 (Offline Installer)
2. Visual C++ Redistributable for Visual Studio 2015
3. Coolpad Download Assistant Setup V1.94_170421.exe
4. Coolpad keys for Assistant ( you need to sign up an account at 4pda to download )
5. Stock EUI18 ROM package for Coolpad Download Assistant
6. Coolpad Driver
7. MiFlash 2015
8. TWRP 3.1.0 by Cuoco92.zip ( you need to sign up an account at 4pda to download )
9. Qualcomm HS-USB QDLoader 9008 driver. ( Windows 10 already has this driver automatically )
10. Android 9 ROM of your choice, of course.
Step 1 : Rolling Back to EUI18
1. Install everything. In the install directory of Coolpad Download Assistant, extract the "Coolpad keys for Assistant" files into main folder. Run Coolpad Download Assistant as administrator.
2. Put phone into bootloader (fastboot) mode. To do this, turn off your phone. Press Vol Down and connect your phone into your PC. The device will boot into bootloader mode with chinese letters and android icon on screen. Check your device manager and it should detect your phone as "Coolpad Android Bootloader Interface". If it didn't detect, make sure you install the driver or try changing USB ports.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Extract the EUI18 .zip file into a folder. It should contain 2 files, "init.cpb" and "ROM.cpb"
4. Open Coolpad Download Assistant. Browse to the folder where you extracted both files. First, select "init.cpb" and click the green button in Coolpad Download Assistant. This "init.cpb" will prepare your device to flash stock EUI and wipe everything.
5. After it finished, now select "ROM.cpb" and click the green button to start flashing. This is the main ROM files to install stock EUI18 into your phone. Your phone screen will change into chinese letters with gears icon.
6. If everything went well, it will say upgrade finished without any error message or red letters at the blue smiley screen. You're now back to stock EUI and stock recovery.
Step 2 : Installing TWRP custom recovery to EUI
1. Now that you successfully rollback to EUI you need to flash new custom recovery TWRP to your phone because you now have stock recovery.
2. Put your phone into QDLoader 9008 mode. To do this, turn off your phone. Press Vol Up + Vol Down button and connect to your phone to PC. Check your device manager and it should detect your phone as "Qualcomm HS-USB QDLoader 9008" (COMXX). Your LED should be blinking red if it enter this mode.
3. Extract TWRP 3.1.0 by Cuoco92 in folder. There's a lot of files here so make sure you put it into separate folder.
3. Open MiFLash 2015 and browse to TWRP 3.1.0 by Cuoco92 folder that you have extracted in your PC.
4. Click refresh in MiFlash and if you got all the correct files earlier, it should detect your phone in it identifies by COMXX ( XX is any number ). If it doesn't detect, try rebooting and booting into QDLoader mode or just change USB ports.
5. In MiFlash, select "Flash all except storage" and click "Flash". Wait for the green bar to finish and it says completed.
6. If everything went smooth without any error, disconnect your phone from the PC. The LED should stop blinking.
7. FIRST BOOT AFTER MIFLASH IS VERY IMPORTANT OR YOU HAVE TO DO THIS AGAIN MAYBE FROM THE COOLPAD DOWNLOAD ASSISTANT.
8. While the phone is still turned off, hold down Vol Up and press power button. This should boot your phone into recovery mode. If it boots into TWRP, then you have done everything perfectly. If it doesn't, try repeating MiFlash steps.
Step 3 : Flashing Android 9 with TWRP
1. Backup your images and document from your phone because we will wipe everything.
2. In TWRP, Wipe>Advanced Wipe, wipe everything, system, cache, data. After that, back to Wipe and choose wipe>format data. Type yes and let it format data to erase your device clean and remove encryption to be able to flash Android 9.
3. After wiping and format data, in TWRP, select Reboot>Recovery to reboot into recovery again. This is important because TWRP need to mount the partitions again after formatting the device.
4. At this point, you're now free to flash any Android 9 ROM of your choice.
*no pictures for Coolpad Download Manager steps in this guide. Will probably put them later. (or not because that would mean I have to rollback my already on 9 Cool1 back to EUI and it might brick)

Reserved

are banking apps working on custom roms?
now i am on 18s (Found a zip file from some where and its working).But while i try to flash [rom] [official] [evolution - x] [pie] [c106/c103] after wiping data,caches , it saying the zip file is for c106,103 etc.One thing i am missing that i didnot format data as i think it will erase saved files from internal storage.Help please

nageswarswain said:
are banking apps working on custom roms?
now i am on 18s (Found a zip file from some where and its working).But while i try to flash [rom] [official] [evolution - x] [pie] [c106/c103] after wiping data,caches , it saying the zip file is for c106,103 etc.One thing i am missing that i didnot format data as i think it will erase saved files from internal storage.Help please
Click to expand...
Click to collapse
You need to edit the updater-script in rom .zip file.

hello can somebody upload the 4/8 step files from 4pda to some other host?
thanks

Back from Android 9 to eui 5.9 cuoco92
vulturext said:
Today I will make a guide as complete as possible to guide new user into flashing custom ROM for their Coolpad Cool 1 Dual. This guide as far as I can tell is usable for all C103, C106 and R116 version.
Introduction :
So our device finally got Android 9 in custom ROM development. Unfortunately, to flash Android 9 you need to be on EUI Android 6 Marshmallow. For those who are already on Android 7 you need to rollback to stock EUI to upgrade to Android 9 or else your device wouldn't boot or stuck in bootloop even with full wipe in TWRP.
Preparations :
1. Microsoft .NET Framework 4.7.1 (Offline Installer)
2. Visual C++ Redistributable for Visual Studio 2015
3. Coolpad Download Assistant Setup V1.94_170421.exe
4. Coolpad keys for Assistant ( you need to sign up an account at 4pda to download )
5. Stock EUI18 ROM package for Coolpad Download Assistant
6. Coolpad Driver
7. MiFlash 2015
8. TWRP 3.1.0 by Cuoco92.zip ( you need to sign up an account at 4pda to download )
9. Qualcomm HS-USB QDLoader 9008 driver. ( Windows 10 already has this driver automatically )
10. Android 9 ROM of your choice, of course.
Step 1 : Rolling Back to EUI18
1. Install everything. In the install directory of Coolpad Download Assistant, extract the "Coolpad keys for Assistant" files into main folder. Run Coolpad Download Assistant as administrator.
2. Put phone into bootloader (fastboot) mode. To do this, turn off your phone. Press Vol Down and connect your phone into your PC. The device will boot into bootloader mode with chinese letters and android icon on screen. Check your device manager and it should detect your phone as "Coolpad Android Bootloader Interface". If it didn't detect, make sure you install the driver or try changing USB ports.
3. Extract the EUI18 .zip file into a folder. It should contain 2 files, "init.cpb" and "ROM.cpb"
4. Open Coolpad Download Assistant. Browse to the folder where you extracted both files. First, select "init.cpb" and click the green button in Coolpad Download Assistant. This "init.cpb" will prepare your device to flash stock EUI and wipe everything.
5. After it finished, now select "ROM.cpb" and click the green button to start flashing. This is the main ROM files to install stock EUI18 into your phone. Your phone screen will change into chinese letters with gears icon.
6. If everything went well, it will say upgrade finished without any error message or red letters at the blue smiley screen. You're now back to stock EUI and stock recovery.
Step 2 : Installing TWRP custom recovery to EUI
1. Now that you successfully rollback to EUI you need to flash new custom recovery TWRP to your phone because you now have stock recovery.
2. Put your phone into QDLoader 9008 mode. To do this, turn off your phone. Press Vol Up + Vol Down button and connect to your phone to PC. Check your device manager and it should detect your phone as "Qualcomm HS-USB QDLoader 9008" (COMXX). Your LED should be blinking red if it enter this mode.
3. Extract TWRP 3.1.0 by Cuoco92 in folder. There's a lot of files here so make sure you put it into separate folder.
3. Open MiFLash 2015 and browse to TWRP 3.1.0 by Cuoco92 folder that you have extracted in your PC.
4. Click refresh in MiFlash and if you got all the correct files earlier, it should detect your phone in it identifies by COMXX ( XX is any number ). If it doesn't detect, try rebooting and booting into QDLoader mode or just change USB ports.
5. In MiFlash, select "Flash all except storage" and click "Flash". Wait for the green bar to finish and it says completed.
6. If everything went smooth without any error, disconnect your phone from the PC. The LED should stop blinking.
7. FIRST BOOT AFTER MIFLASH IS VERY IMPORTANT OR YOU HAVE TO DO THIS AGAIN MAYBE FROM THE COOLPAD DOWNLOAD ASSISTANT.
8. While the phone is still turned off, hold down Vol Up and press power button. This should boot your phone into recovery mode. If it boots into TWRP, then you have done everything perfectly. If it doesn't, try repeating MiFlash steps.
Step 3 : Flashing Android 9 with TWRP
1. Backup your images and document from your phone because we will wipe everything.
2. In TWRP, Wipe>Advanced Wipe, wipe everything, system, cache, data. After that, back to Wipe and choose wipe>format data. Type yes and let it format data to erase your device clean and remove encryption to be able to flash Android 9.
3. After wiping and format data, in TWRP, select Reboot>Recovery to reboot into recovery again. This is important because TWRP need to mount the partitions again after formatting the device.
4. At this point, you're now free to flash any Android 9 ROM of your choice.
*no pictures for Coolpad Download Manager steps in this guide. Will probably put them later. (or not because that would mean I have to rollback my already on 9 Cool1 back to EUI and it might brick)
Click to expand...
Click to collapse
Hi
1- The first question
After going to Android 9
How to get back to eui 5.9 cuoco92 ?
2- The second question
To install different versions of Android 9 on the base
[Pixel Experience] or [Remix OS] or [evolution-x] or [Havoc OS]
wipe everything, system, cache, data, format data
On twrp
You are satisfied ?
Thanks :good:

Is it possible to flash android 9 ROM over Cool1_26S_ROW_BETA01_CUOCO92 ROM?
Thanks

[RECOVERY][UNOFFICIAL][TWRP] Samsung M51 TWRP 3.4.0 (Stable)

UNOFFİCİAL TWRP RECOVERY 3.4.0
**ATTENTİON**
I'm not responsible for any bricked device.
Bugs
- Data encryption doesn't working. But I found a way to mount data. Follow my steps to mount data permanently.
- I couldn't find any other bugs. You'll tell me.
How to unlock your Bootloader?
**THİS WILL FORMAT YOUR DATA**
1- Go to Settings --> About Phone --> Software Information and click 7 times build number.
2- Now turn back to settings and pull down. You will see the Developer Options. Enable OEM Unlock and Usb Debbuging.
3- Now turn off your phone.
4- Hold [Vol Up + Vol Down] buttons and connect your phone to your pc while you are holding the buttons.
5- You will see a green screen. Hold the Vol Up button until an confirmation screen comes up and then only press Vol Up (Don't hold it again).
Now your phone will format itself and your bootloader will be unlocked !!!
INSTALLATION
(Before the installation you must unlock your bootloader)
1- Download the attached files.(Extract Odin,TWRP and USB Driver from the zip and install the samsung usb drivers)
2- Download your stock rom from the download button for a clean install.
(Extract the files too)
DOWNLOAD STOCK
(If you don't want to make a clean install you can skip to step 7 and format internal storage and data over twrp before installing the zips.)
3- Reboot your phone into bootloader (Press Vol Up + Vol Down Connect your phone and after it booted press again Vol Up)
4- Go to odin and click on the AP button and select your extracted AP (example: AP_M515FXXU1BTK4........_.tar.md5)
The verification will take a while be patient.
5- Now match the other files with BL CP and CSC
Leave Userdata blank.
Don't select HOME_CSC and delete this file otherwise twrps data mount won't work.
6- Press start and wait. NOW YOU MUST BE QUICK. After "Super" HOLD ONLY [Vol Up + Vol Down] until your phone reboots. It will take a while wait please. After it boots again into bootloader press Vol Up.
7- Now go to odin click AP, select Twrp.tar and press start . You must be quick again. Enter recovery after install before your phone reboots normal. Otherwise mount data on twrp won't work.
8- Now copy the files (Disable_Dm_verity.zip,Magisk.zip,multidisabler.zip) onto your sdcard or over mtp to your device. Install first Disable_Dm_Verity.zip and multidisabler.zip. Then install Magisk.zip. At last Install Disable_Dm_verity.zip again.
9- Reboot your phone and format data over settings to fix the 32GB storage bug.
10- After the format progress install MagiskManager.apk for root.
11- Enjoy it.
Backup your data before installing.
If you have any problems tell it me I'll help you.
If you want you can donate ​
Paypal(EUR): Donate
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paypal(US): Donate
BITCOIN KEY:
xpub661MyMwAqRbcFh8eA5BSesBNmKMAtFPpvP1wSrK53JmpPsKhQ5MwMwD64EyCjHEcCTiXmb3tD4TPUz2VpbfXDptc6QVew9H2x8ddQNdsiS4
​
After weeks I succeed fixing mount the dynamic partition and data. Now I'll work more on my miui project stay on.
Change Log:
Multidisabler 3.1 update
-Stable and compatible
Stable 2 -30th December 2020
-Fix mount Odm
-Fix backup Super Partition
Stable 1 - 26th December 2020
-Fix dynamic super partition mounting
-Fix File Manager
-Find a way to mount data partition correctly
-Fix MTP
-Other stuff
Beta 1 - 14th December 2020
- Fix mount external sdcard
- Fix screen overlay
Alpha 1 - 9th December 2020
- Inital Release
Thanks to
- @Zackptg5 for Disable_Dm_Verity_Forceencrypt
- @firemax13 for his source
- @LahKeda for his source
- @geiti94 for his source

Don't root your Samsung device as it will be void of warranty and many other troubles

k1n9n0th1n9 said:
Don't root your Samsung device as it will be void of warranty and many other troubles
Click to expand...
Click to collapse
I know what i do dont trouble.

I rooted it on the first day, but there's no rom nor kernel to flash. Poor for m51

dxxdxx said:
I rooted it on the first day, but there's no rom nor kernel to flash. Poor for m51
Click to expand...
Click to collapse
I made it .

Your recovery won't work, I managed to solve your vbmeta issue but it reboots to bootloader.
I built one from source and it still doesn't boot, even though I'm trying to fix that.
Maybe we will get a working recovery soon

It works now.

dxxdxx said:
I rooted it on the first day, but there's no rom nor kernel to flash. Poor for m51
Click to expand...
Click to collapse
What guide did you use?

grinna said:
What guide did you use?
Click to expand...
Click to collapse
ulnlock your device. then extract and install the file below over odin than download magisk zip and flash it (unlocking bootloader formatts your data)

hummm ... good things starting to happen for M51. Keep it up and thanks ...

Data Decryption is working?

LahKeda said:
Data Decryption is working?
Click to expand...
Click to collapse
I couldn't encrypt but i found a way to mount data permanently. You must disable forceencryption on your phone. I wrote on my steps how to disable. It works on me. I've tested it on my m51.

bekirakil said:
I couldn't encrypt but i found a way to mount data permanently. You must disable forceencryption on your phone. I wrote on my steps how to disable. It works on me. I've tested it on my m51.
Click to expand...
Click to collapse
so it's not much different from my build.
btw, did you build from source or ported it?

LahKeda said:
so it's not much different from my build.
btw, did you build from source or ported it?
Click to expand...
Click to collapse
I mixed it from s20 and a80 twrp and we don't need to type any command to mount system. Vendor and other partitions can mounted. These are de differences.

bekirakil said:
I mixed it from s20 and a80 twrp and we don't need to type any command to mount system. Vendor and other partitions can mounted. These are de differences.
Click to expand...
Click to collapse
That's already fixed in stable 1 and it works without any problem plus I don't use any hacks to mount the data or don't need to flash other files to mount data.
Just flash twrp files and it works out of the box

LahKeda said:
That's already fixed in stable 1 and it works without any problem plus I don't use any hacks to mount the data or don't need to flash other files to mount data.
Just flash twrp files and it works out of the box
Click to expand...
Click to collapse
No, you haven't fixed it we must type commands into terminal on twrp to mount. On my twrp it mounts automatically. But on yours vendor and other dynamic partitions haven't complete mount support.

In step 6, I don't see the super status, do you mean the pass status?

swiftez said:
In step 6, I don't see the super status, do you mean the pass status?
Click to expand...
Click to collapse
I mean a little bit earlier to don't miss the first boot. You must boot it again in bootloader before it boots normal.

bekirakil said:
I mean a little bit earlier to don't miss the first boot. You must boot it again in bootloader before it boots normal.
Click to expand...
Click to collapse
After following all the steps and have root, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?

swiftez said:
After following all the steps and have root, do I need to press power and volume up button every time I restart the phone to have Magisk root or can I boot it normally without pressing anything?
Click to expand...
Click to collapse
After these steps you can boot your phone normally. Only at first install you need to go to magisk manager and install libraries.

How To Guide [GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]

Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286 (Narzo 50) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:
FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
A.32 (Indian) - Mega | GDrive
A.32 (Global) - Mega | GDrive
A.30 (Indian) - Mega | GDrive
These firmwares are from Realme 8i but will work for Narzo 50 also (I will add Narzo 50 firmwares soon)
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
Click on Connections and select UART and set Baud Rate to 921600
7) after that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
8) Uncheck oplusreserve2 first. Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
Notes :
After this phone might not boot due to encryption, you can do any of the below procedures to format your data and boot your phone
1. In case you can access recovery by holding volume and power button - Wipe all data from recovery and reboot
2. In case you cannot access recovery, power off phone then enter this command in mtkclient :
Code:
python mtk e metadata,userdata,md_udc
and connect phone while holding both volume buttons. After this just reboot phone
Also note that first boot takes some time, so don't panic leave it for few minutes it'll boot
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
If you face any issues contact me here

great.. does this lock bootloader?? and will SafetyNet pass after this??

It doesn't work.Returns an error.

Why do you have another phone identified in the last screenshot.?And when the firmware reaches the file oplusreserve2.img gives an error that I posted yesterday?Take a look at the screenshot above.

And this is not a firmware, it takes a minute.Does not flash the super partition.You can just flash the stock files to recover and THAT's IT.

sany.svenson said:
Why do you have another phone identified in the last screenshot.?And when the firmware reaches the file oplusreserve2.img gives an error that I posted yesterday?Take a look at the screenshot above.
Click to expand...
Click to collapse
The last screenshot is for representative purpose only... No one have actually bricked yet so... The guide is pretty generalized for any mtk... If you have followed the guide properly it should work... Let me upload A32 firmware here try that.

I updated the link with latest sp flash tool... Try with that

sany.svenson said:
And this is not a firmware, it takes a minute.Does not flash the super partition.You can just flash the stock files to recover and THAT's IT.
Click to expand...
Click to collapse
edit the scatter file find "super.img" and change is_download: "false" to "true" then save it and flash

pritish1998 said:
I updated the link with latest sp flash tool... Try wit
Click to expand...
Click to collapse

pritish1998 said:
The last screenshot is for representative purpose only... No one have actually bricked yet so... The guide is pretty generalized for any mtk... If you have followed the guide properly it should work... Let me upload A32 firmware here try that.
Click to expand...
Click to collapse
I unpacked 32 firmware myself.I have it.

sany.svenson said:
I unpacked 32 firmware myself.I have it.
Click to expand...
Click to collapse
Did you merge the super.img?

pritish1998 said:
Did you merge the super.img?
Click to expand...
Click to collapse
sany.svenson said:
I unpacked 32 firmware myself.I have it.
Click to expand...
Click to collapse
Also the given A30 fw is fine just edit the scatter file and make super.img flash true

pritish1998 said:
Also the given A30 fw is fine just edit the scatter file and make super.img flash true
Click to expand...
Click to collapse
can you upload a scatter file here?

sany.svenson said:
can you upload a scatter file here?
Click to expand...
Click to collapse
@bobongros please upload it for him

bobongros said:
edit the scatter file find "super.img" and change is_download: "false" to "true" then save it and flash
Click to expand...
Click to collapse
can you upload a scatter file here?

sany.svenson said:
can you upload a scatter file here?
Click to expand...
Click to collapse
I updated the firmware link just use it... it'll work fine... Also after bypass you don't need to hold volume buttons

pritish1998 said:
I updated the firmware link just use it... it'll work fine... Also after bypass you don't need to hold volume buttons
Click to expand...
Click to collapse
It reaches oplusreserve2 and an error comes out.The fleshtul from the new link does not want to read the scatter file.Writes that it does not work with this processor.
Sorry.You're tired of me already...

sany.svenson said:
It reaches oplusreserve2 and an error comes out.The fleshtul from the new link does not want to read the scatter file.Writes that it does not work with this processor.
Sorry.You're tired of me already...
Click to expand...
Click to collapse
Other people tried and it's working for them... Idk what is the problem at your end. ... Reach out to me on telegram we will help

pritish1998 said:
Other people tried and it's working for them... Idk what is the problem at your end. ... Reach out to me on telegram we will help
Click to expand...
Click to collapse

sany.svenson said:
View attachment 5480563
Click to expand...
Click to collapse
with that fleshtul that you posted last.How can I find you in a telegram?Give me a link to your profile.

Question Hardbrick no recovery or fastboot

Forgot how it got to this point, i think i flashed wrong boot.img or something, but my device just reboots constantly on the redmi sign. Tried following the guides on here but i got lost at some point. I've installed the driver filter and done the mtk bypass thing, but I'm confused on where i should go from here?

first of all, install MTK preloader/brom vcom drivers for your PC be able to detect your phone in BROM mode (attached below)
install MiFlashPro, you will need it to fill the Download-Agent in sp tool so you can write the boot images to recover your phone.
then, use the miui ROM that you used before bricking it, or download it from any website (my favorite is mifirm.net, it downloads faster)
now open sp tool from MiFlashPro.
now you will need to fill out 3 spaces:
download-agent (DA for short), scatter-loading file & authentication file.
DA is to have access to the devices internal storage, scatter-loading shows you the mapping of the partitions it will flash on the mtk & authentication is just MTK protection for newer mtk devices that you need to be able to flash (its also used to successfully flash, but you still need to bypass it somehow, as you require a Mi Account able to do BROM flashing, see below as you follow the thread)
to find the DA, it is always in the MiFlashPro installation location, so ...\MiFlashPro\. Access that folder, open up "\SP_Flash_Tool_V5" folder, and you will find a file named "MTK_AllInOne_DA.bin", use it as the DA.
to find the authentication file, its located in the same path of the DA, so ...\MiFlashPro\SP_Flash_Tool_V5\, and you will find a file named "auth_sv5.auth", use it as the authentication file.
finally, to find the scatter-loading file, it is in the rom folder you extracted, so ...\camellian_xx_xxxx_images_VXX.X.X.X.xxxxx_XXXXXXXX.XXXX.XX_XX.X_xxxxxl\ (the X's represent your MIUI version you downloaded). the scatter-loading file is always located in the folder "images", so \camellian...\images\, and you will find a text file named "MT6833_Android_scatter.txt", use it as the scatter-loading file.
Now, you need to edit the "MT6833_Android_scatter.txt", or else when you use to flash you will get this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open it (located at your MIUI ROM folder at \images), then use the locate tool to find "combo_partsize_check: true". You will probably find a few lines set as true, just replace every one with false (if it doesnt find it, just put "combo_partsize_check", but you will waste more time finding those that are set to true)
Alright, we finished our sp tool settings. now we have to bypass MTK Auth protection.
(Dont close sp tool yet!)
Ive annexed the tool below (mtkauthbypass.zip), download it and extract it.
It looks like this:
After you are ready, press the "Disable Auth" button, get your hands on the phone and press at the same time the VOL+, VOL- & POWER button, till you see prompts appearing in the blank (i dont have a screenshot to show how it looks like, sorry)
after it bypasses, go to sp tool and click download immediately, then your device should come to life.
if it didnt work, i recommend selecting every mapping excluding your data, or do a full reflash if you wish or as last resort

1lopes said:
first of all, install MTK preloader/brom vcom drivers for your PC be able to detect your phone in BROM mode (attached below)
install MiFlashPro, you will need it to fill the Download-Agent in sp tool so you can write the boot images to recover your phone.
then, use the miui ROM that you used before bricking it, or download it from any website (my favorite is mifirm.net, it downloads faster)
now open sp tool from MiFlashPro.
now you will need to fill out 3 spaces:
download-agent (DA for short), scatter-loading file & authentication file.
DA is to have access to the devices internal storage, scatter-loading shows you the mapping of the partitions it will flash on the mtk & authentication is just MTK protection for newer mtk devices that you need to be able to flash (its also used to successfully flash, but you still need to bypass it somehow, as you require a Mi Account able to do BROM flashing, see below as you follow the thread)
to find the DA, it is always in the MiFlashPro installation location, so ...\MiFlashPro\. Access that folder, open up "\SP_Flash_Tool_V5" folder, and you will find a file named "MTK_AllInOne_DA.bin", use it as the DA.
to find the authentication file, its located in the same path of the DA, so ...\MiFlashPro\SP_Flash_Tool_V5\, and you will find a file named "auth_sv5.auth", use it as the authentication file.
finally, to find the scatter-loading file, it is in the rom folder you extracted, so ...\camellian_xx_xxxx_images_VXX.X.X.X.xxxxx_XXXXXXXX.XXXX.XX_XX.X_xxxxxl\ (the X's represent your MIUI version you downloaded). the scatter-loading file is always located in the folder "images", so \camellian...\images\, and you will find a text file named "MT6833_Android_scatter.txt", use it as the scatter-loading file.
Now, you need to edit the "MT6833_Android_scatter.txt", or else when you use to flash you will get this error:
Open it (located at your MIUI ROM folder at \images), then use the locate tool to find "combo_partsize_check: true". You will probably find a few lines set as true, just replace every one with false (if it doesnt find it, just put "combo_partsize_check", but you will waste more time finding those that are set to true)
Alright, we finished our sp tool settings. now we have to bypass MTK Auth protection.
(Dont close sp tool yet!)
Ive annexed the tool below (mtkauthbypass.zip), download it and extract it.
It looks like this:
After you are ready, press the "Disable Auth" button, get your hands on the phone and press at the same time the VOL+, VOL- & POWER button, till you see prompts appearing in the blank (i dont have a screenshot to show how it looks like, sorry)
after it bypasses, go to sp tool and click download immediately, then your device should come to life.
if it didnt work, i recommend selecting every mapping excluding your data, or do a full reflash if you wish or as last resort
View attachment 5860063
Click to expand...
Click to collapse
I was having errors with 'verified boot', managed to reflash everything with mtkclient, how do i get back to stock rom from here? Phone boots to fastboot mode but 'fastboot reboot fastboot' or 'fastboot reboot bootloader' just reboots device

HollyMarijuanna said:
I was having errors with 'verified boot', managed to reflash everything with mtkclient, how do i get back to stock rom from here? Phone boots to fastboot mode but 'fastboot reboot fastboot' or 'fastboot reboot bootloader' just reboots device
Click to expand...
Click to collapse
use mi flash pro, open mi flash, download miui rom and flash it thru there while on fastboot. you dont need dynamic fastboot for it, dont worry

1lopes said:
use mi flash pro, open mi flash, download miui rom and flash it thru there while on fastboot. you dont need dynamic fastboot for it, dont worry
Click to expand...
Click to collapse
Thank you! I was trying to fix this phone in December and gave up.. I appreciate your help

HollyMarijuanna said:
Thank you! I was trying to fix this phone in December and gave up.. I appreciate your help
Click to expand...
Click to collapse
glad to help