Related
CyanogenMod 13.0 for Xiaomi Redmi Note 3 Snapdragon version
What works ?
Audio
Wifi
Bluetooth
Camera
RIL
GPS
FM
Fingerprint
What doesn't ?
Stuff that i might have not noticed
Changelogs :
02/09/2016
- Sync with latest CM ( includes off screen charging mode animation, default Hexalibre CM theme package,etc etc)
- Switched to newer radio blobs
- Other minor device cleanups
( Been hell busy & if i have time i will work on CM14 (android N), but at the moment i am not working and hence don't expect any immediate cm14 builds)
05/08/2016
- Sync with latest CM
- My non CM features retained as such
- Support for goodix fingerprint users ( Make sure to flash ROM followed by fp patch. Normal users for whom fingerprint used to work don't need to flash the patch)
- Loads of device cleanup
- Other minor improvements
Older Changelogs
18/07/2016
- Fix settings->security fc caused due to 15/07 build
15/07/2016
- F2fs implemented ( on /data and /cache ) => tested working
- Sync with latest cm
- Pokemon go mock location hack
- Other improvements
- Previous non CM features retained as such
05/07/2016
- Sync with latest CM
- GPS improvements
- Reduce headphone noise
- F2FS support is added (but i doubt it will boot[might be stuck in bootanim], as i didn't make a clean build) [ Try at your own risk if you know how to flash f2fs rom[you need a f2fs twrp recovery], if you don't know just flash ROM like always ]
- Previous non CM features retained as such
- Some cleanup and other performance improvements
Downloads:
Latest builds
For flashing the latest build which is based on M firmware checkout the guide here
If you face camera FC just flash this patch [ not applicable to f2fs users if they have switched to f2fs ]
Just a request to users :
Please don't mirror the ROM anywhere.Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2016-09-02
Created 2016-04-02
Last Updated 2016-09-02
Reserved
Thanks to the following donators :
@Tig3ro
@sffoxy
@FrozenMindXXIII
@gap30
@t3chs0l0
@dmahtani
@badm0j0
If someone wishes to thank for my work and donate, choose the option of services/goods in paypal ( as I am a Indian user ) and the donation will go through. [ The minimal withdrawal amount for paypal indian user is 10$. Just FYI. Lesser amounts than that get stagnated in the account until the paypal balance reaches 10$ ]
Wow! So fast) Thank you.
Good luck with the further work on ROM.
And the awesomeness begins!!
Can you release the device and vendor. I want to help you.
Gửi từ kenzo của tôi bằng cách sử dụng Tapatalk
Awesome, CM13 so quickly...!
Sent from my kenzo using Tapatalk
Good job.
Sent from my Redmi Note 3 using Tapatalk
Good job
Good job!!!
Keep up the good work!!!
Nice..
Sent from my Redmi Note 3 using Tapatalk
Nice! Good to see cm13 this early on this device, good luck with the development!
Shared this thread on Miui's forum, hope you don't mind.
Good Work
Sent from my Redmi Note 3 using XDA-Developers mobile app
Official?
Awesome! One step closer to the approval to get OFFICIAL CyanogenMod... (dreaming is free)
Can someone upload screenshots of this ROM?
Awesome!!! I knew it was a great idea to invest in a phone with a Snapdragon processor, Keep up the good work!
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
DrWillz said:
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
Click to expand...
Click to collapse
I am looking to fix that same "some reason"
Build.prop
Santhosh M said:
I am looking to fix that same "some reason"
Click to expand...
Click to collapse
Can you fix it editing build.prop?
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
yassineak47 said:
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
Click to expand...
Click to collapse
No it doesn't. You guys misunderstand how this works
For every piece of hardware in Android you need three things
A kernel driver (we have that), a matching hal for the system's API, and service / client software that interfaces with the hal
Sadly we are missing the hal
The only hal in existence is that of xiaomi but it's a selfcooked API which most likely needs some wrappers around it to work with stock 6.0 as it lacks user management
Whenever people say Android 6 has built in support for FP readers they mean that Google established a standard API for OEMs to build hals from.
That doesn't mean that all systems now magically start having their FP readers work
Code:
*** Disclaimer
I am not responsible for any damage you made to your device.
You have been warned. ***
Introduction
This is a port of crDroid 3.8.5 for the Lenovo Yoga Tab 3 Plus LTE (LTE only!).
Credits:
@matshias and @DerEineDa for their excellent work on the LineageOS port to the YT-X703F.
@vladimiroltean for his LineageOS port to the YT-X703L. He did all the work.
Please refer to their thread on the LOS port for more information https://forum.xda-developers.com/thinkpad-tablet/development/unofficial-lineageos-14-1-lenovo-yoga-t3561457.
Source crDroid
Download:
Current version on AFH: crDroid 3.8.5 (crDroidAndroid-7.1.2-20180227-YTX703L-v3.8.5.zip)
Previous versions on AFH:
crDroid 3.8.5 (crDroidAndroid-7.1.2-20180120-YTX703L-v3.8.5.zip)
crDroid 3.8.4
crDroid 3.8.3
Before flashing, always have a full functional backup. Just in case!
Installation:
Install TWRP, wipe system + data, flash crDroid, reboot.
Flash gapps after the first reboot.
Changelog:
2017-02-27: Update to crDroid 3.8.5 (Februar 2018 Lineage OS security fixes)
2017-01-20: Update to crDroid 3.8.5 (Januar 2018 Lineage OS security fixes)
2017-12-14: Update to crDroid 3.8.4 (December 2017 Lineage OS security fixes)
2017-11-21: Update to crDroid 3.8.3
2017-10-31: Update to crDroid 3.8.2
Have crDroid on my S6 phone and its great. Was only looking the other day for a decent custom rom for my tab and this week here one is
Only dont think it will work as not lte but 350 F. What do you think ?
cleverdicky said:
Only dont think it will work as not lte but 350 F. What do you think ?
Click to expand...
Click to collapse
Please do not try this on any other hardware than a YT-X703L.
Update to crdroid 3.8.3, November 2017 security patches.
Download: crdroid 3.8.3 for YT-703L
tab 3 plus wifi
but only wifi development is there anymore?
Renval said:
but only wifi development is there anymore?
Click to expand...
Click to collapse
Sorry - i build and test the LTE version only. :laugh:
Hi friends,
amazingly what you are done. After the last update from lenovo (20170824 or earlier) the sound of this tablet is very bad because dolby is shut down.
With you ROM and the thread of matshias, the lenovo LTE version now is fantastic. Extremely fast, super sound.
What I have done:
with minimal adb (see matshias Thread forum.xda-developers.com/thinkpad-tablet/general/beta-twrp-root-disable-encryption-yoga-t3538017) flased this custom ROM
after that flashed dolby atmos and open gapps (arm64, 7.1, nano)
- and voilà it's running very well - better than before!!! DRM Level is L1 so it should work with Amazon and Netflix (but can't test it)
Thank you again to all the involved guys
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
Renval said:
but only wifi development is there anymore?
Click to expand...
Click to collapse
Have you checked this Thread : forum.xda-developers.com/thinkpad-tablet/development/unofficial-lineageos-14-1-lenovo-yoga-t3561457
Hi, are there any known issues with the rom?
I installed LineageOS on my Tab 3 Plus LTE(experimental version) before. Unfortunately the cam (for skype), screen mirroring and the micro in whatsapp didn`t work. Thats why I uninstalled LOS and current I use stock.
Regards!
Both cameras and the microphone work for me. You did grant the apps access?
Yes, I did! But in LineageOS they didn`nt work
But now I jumped in at the deep end
I installed crDroid without waiting for an answer , of course backup before!
And now, wow, it works very fine. I can use all features, many thx to the author!!
Now crDroid and nova launcher, both are as couple, one of the the finest roms!
Thank you!
Thank you. Worked perfect here!
Thanks for the custom rom. Finally, my xbox one controller connects via bluetooth. Sometimes the connection breaks off.
Maybe you can find a solution.
I am grateful to you now.
Best regards
Gesendet von meinem Moto G4 Plus mit Tapatalk
I have rebuild the rom and updated the files in the first post with an updated crDroid 3.8.4. This includes the December 2017 Lineage OS security patches.
Have fun, stay safe!
Hi, Tribble, thx for the update! Befor flashing I first will backup my system. Can I restore the data section after flashing or is it necassary to reorganize?
launcher20 said:
Befor flashing I first will backup my system. Can I restore the data section after flashing or is it necassary to reorganize?
Click to expand...
Click to collapse
I upgraded with a dirty flash - just clear dalvik and cache. No issues...
Hi Tribble, I meaned the data of previous version 3.83, can i restore them with twrp? If not, then only dirty flash and renew? Clear calvik and cache ok!
launcher20 said:
Hi Tribble, I meaned the data of previous version 3.83, can i restore them with twrp? If not, then only dirty flash and renew? Clear calvik and cache ok!
Click to expand...
Click to collapse
Dirty flashing does not clear data, only system.
That said - with a full backup you can always go back if something went wrong.
(Always have a good and tested backup, preferably stored outside your device!)
Hello everybody.
Can anyone check the operation of the USSD function on this ROM?
pakster67 said:
Hello everybody.
Can anyone check the operation of the USSD function on this ROM?
Click to expand...
Click to collapse
USSD codes do not seem to work. I never used one on the tablet, so i did not notice. Needs investigating...
Tribble said:
USSD codes do not seem to work. I never used one on the tablet, so i did not notice. Needs investigating...
Click to expand...
Click to collapse
Thanks for your answer. Already checked it and USSD function work perfect.
Thanks for a grate ROM.
##########You are NOT allowed to use any part of this rom without my permission"....!!##########
Nougat Rom For On7/On7pro SM-G600FY
ABOUT THIS PROJECT
Code:
- Based on Stock Rom A8+ And J5 2016
SUPPORTED VARIANTS
Code:
1. SM-G600FY- ON7
2.SM-G600FY- ON7PRO
BUGS = None
INSTALLATION
1. FOLLOW THIS
2. Download the ROM and copy in sd card
3. Enter in Recovery ,
4.WIPE (system,cache,data)
5. After follow the instructions of the Aroma Installer.
6. Select Apps, Mods, etc.
7.Reboot and Wait 5min OM (First start of installation, long delay).
8. Configure & enjoy the ROM.
Rom Name
INS V6.0 FINAL ROM SM-G600FY FOR ON7/ON7PRO
BY RAGHU VARMA
CREDITS AND THANKS
ROM Ported By -- #RAGHU_VARMA
TESTED IN ON7 -- #PALASH_&ME
TESTED IN ON7PRO -- #VENKAT AND MY ON7 WHATSAPP GROUP
Based Rom By -- #SAMSUNG_J510FN
Kernel build -- #RV_INSPIRON3521
XDAevDB Information
@Raghu varma
ROM OS Version: 7.1.1 Nougat
ROM Kernel: Liux 3.10.x
ROM Firmware Required: Marshmallow Frimware
Based On: STOCK ROM J510FN & A8+
Version Information
Status: STABLE
Current Version:6.0
Beta Release Date: 2018-01-11
Download links :
mod edit - link removed
Good work bro
Does volte works...????
Yes volte is working in this rom
can you provide TWRP flashable kernel, please
Is any audio mode like Dolby is available for this ROM?
Thanks for the ROM
Rihhan said:
Yes volte is working in this rom
Click to expand...
Click to collapse
yes
Hey developer! @raghuvarma.ya i have a samsung on 7 pro bought in saudi. It asked for network unlock pin after inserting indian sim card. Took it out for repair, the repair guy installed another country's rom. Network unlock pin is now not displayed. The phone is working with indian sim but Fingerprint sensor and many features aren't working. Will reverting back to saudi firmware ask the network unlock pin again?
have you tried flashing the latest firmware for your device? Use odin after exporting your user files(for backup). I flashed different firmware already for G600FY and haven't got any issue about sim(maybe because the device I have is an openline model).
@Raghu varma Please mention the kernel source used.
@Raghu varma, in this ROM it is possible to use the SD card as internal memory?
Deepanshu Kaswan said:
Does volte works...????
Click to expand...
Click to collapse
Yes
---------- Post added at 09:33 AM ---------- Previous post was at 09:30 AM ----------
I am using this rom...it is stable and everything working fine ..no bugs yet..guys help the developers so that he can get the motivation to develop many more rom in the future..
There's a bug
When I try to set a lock, like for pin it gets an error. Settings exit
This rom is old and buggy...
xsephtion said:
When I try to set a lock, like for pin it gets an error. Settings exit
Click to expand...
Click to collapse
This rom has few bugs so the dev @Raghu varma developed INS v7.0 (it too has camera issue but got a fix). Luckily we're constantly getting new roms for this device and those're almost stable (except proximity senser).
I'd recommend you to goto the link (check your inbox ) and download latest A-Z rom or Note 8 rom or Anniyan rom.
proximity sensor, google assistant
can you add proximity sensor during call screen instead of double tap to unlock. and this rom have not google assistant enabled.
the battery is draning very fast. these 3 thing only required by rom. on the other hand this rom is very smooth and fast.
i request u to add this features.
sharma00764 said:
can you add proximity sensor during call screen instead of double tap to unlock. and this rom have not google assistant enabled.
the battery is draning very fast. these 3 thing only required by rom. on the other hand this rom is very smooth and fast.
i request u to add this features.
Click to expand...
Click to collapse
The proximity sensor bug isn't fixed yet but devs are working on it.
About the google assistant, since Google app was removed from /system/priv-app/ while cleaning the rom, you need to put it back there using any method [ie. using file manager in TWRP or using any Systemizer app] and it'll work fine.
Newer version of this rom is reported to have good battery backup. Try it out.
features required
plz add applock , AOD service,blue light filter ,bixby if support
i love this rom plzz add these features and thanks for google assistant instruction
Features already present in newer roms
sharma00764 said:
plz add applock , AOD service,blue light filter ,bixby if support
i love this rom plzz add these features and thanks for google assistant instruction
Click to expand...
Click to collapse
AOD service, Bixby and light filter (perhaps) are working fine in newer ROMs. Search for them as those are already shared in forum by the devs. I don't know why there's no proper forum section for our phone. App lock didn't seem to be working.
And yes, You're welcome!!
floating windows
hey bro how to add floating window or snap window like note 8.
or plzz can u add this feature
surendrajat said:
AOD service, Bixby and light filter (perhaps) are working fine in newer ROMs. Search for them as those are already shared in forum by the devs. I don't know why there's no proper forum section for our phone. App lock didn't seem to be working.
And yes, You're welcome!!
Click to expand...
Click to collapse
I made app lock working on this thread https://forum.xda-developers.com/s7-edge/themes/samsungs-app-lock-nougat-root-t3574434
credits to the original poster.
volte bug
alfhatz said:
I made app lock working on this thread https://forum.xda-developers.com/s7-edge/themes/samsungs-app-lock-nougat-root-t3574434
credits to the original poster.
Click to expand...
Click to collapse
after flashing fix.zip file volte not working what can i do now plzz fix it
Samsung Pixel Experience PBy CodeFox & OpenSauce9810
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimised as much as possible for our Samsung Devices. This is what differentiates this rom from the one you can find in the Project Treble Forum. I also plan to provide regular updates and improvements very frequently. I'm aiming for weekly if not more.
Why not Rainbow_Dash?
We're a part of the same team and he's taking a break from developing for the moment, so I'm going to do my best to support you with regular updates and support where possible. So his previous version should be considered redundant.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash BRJ6 Vendor (If you're not on it already)
Flash a compatible kernel (I believe Endurance Kernel AOSP Works fine)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
To boot recent GSI Builds, on S9/+ be sure to have:
•BRJ6 Vendor
•Eamons latest Endurance Kernel based on 8.1 (AOSP)
•Soldiers latest ELS
*On some ROMs you will find Fingerprint doesn't work, so flash Soliders latest ELS, try and let your phone boot and then flash Endurance again after. You will notice your Fingerprint process isn't in a loop anymore*
What's different to the PE in project treble forum?
Thanks to GRaf for this guidance ^^
Smoother UI Performance Fixes
Debloated unneccessary libs from other devices
Vibration Motor has been corrected (it's too powerful in GSI)
Regular Maintenance / Builds & Support
Changelog:
30.11.2018 - Initial XDA Release & Unofficial rollout.
01.12.2018
Animation integers corrected to be smoother
Black boot-animation added, no more being blinded by the boot animation
Pixel Live Wallpapers included
High Resolution default wallpaper added
09.12.2018 (Now maintained by @malinathani
Made system ui a hella smoother compared to before
Face unlock works
Phh settings removed. All samsung options should now be persistent.
14.12.2018
-Fixed fingerprint on note 9, should work now with almost any vendor so get the latest one
-Almost everything works now
Bugs:
Auto brightness and home button in always on display.
You tell me
Downloads:
System Image
Link to Endurance Kernel Thread for compatible kernel
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani - For fixing the UI Jank which we experienced in GSI's. His fix is widely used in other GSI's now.
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
XDA:DevDB Information
[Discontinued]Pixel Experience P[UNOFFICIAL][14.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CodeFox, Rainbow_Dash, malinathani, Mohammed Nathani, Opensauce9810, Ivan Meler, phhusson
Source Code: https://github.com/PixelExperience
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRJ3 Vendor
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2018-11-30
Created 2018-11-30
Last Updated 2019-01-07
working fine on s9+
Awesome thank you very much ?
thank you, could please post some screenshot.
Does not progress from white pixel boot screen for me s9+.
I'm a little confused by the instructions. I am on the BRJ8 vendor currently. Do i flash it in this order?
Wipe system, data, cache, dalvik cache
Install the rom img into the system partition
Reboot into recovery
Install the endurance kernel aosp 9.0
Correct?
LavaSnake54 said:
I'm a little confused by the instructions. I am on the BRJ8 vendor currently. Do i flash it in this order?
Click to expand...
Click to collapse
tried, doesn't go further than boot logo after flashing all that on BRJ8 So you need BRJ6
a_swed said:
doesn't go further than boot logo after flashing all that on BRJ8
Click to expand...
Click to collapse
read read read read
I've updated the OP with further guidance regarding getting it to boot. I don't have the S9/S9+ so I had to to go to a buddy and ask him. Hopefully this will help you get it booting now.
Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?
LavaSnake54 said:
Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?
Click to expand...
Click to collapse
Well we don't have a pie kernel sources yet, so yes. Plus it's a Generic System Image. The 8.1 kernel works fine.
New build posted. see OP for details.
One more question, I am already on BRJ8 firmware, and I heard somewhere that samsung doesn't allow you to downgrade to an older firmware. Is this true? Do i just flash the BRJ6 firmware on my already current rom?
LavaSnake54 said:
One more question, I am already on BRJ8 firmware, and I heard somewhere that samsung doesn't allow you to downgrade to an older firmware. Is this true? Do i just flash the BRJ6 firmware on my already current rom?
Click to expand...
Click to collapse
You need the vendor, nit the firmware. And yes, you can flash vendor and firmware.zips how you like. Versions up and down. I am speaking about the flashable version for TWRP.
---------- Post added at 06:41 PM ---------- Previous post was at 06:32 PM ----------
Flashable Vendors:
http://cloud.timo-ehlers.de/S9(+)/Vendor/
Nice work! Glad to hear you going with weekly updates too! Flashing this one asap tomorrow!
Snapdragon
I'm assuming this doesn't work on the US Snapdragon variants? Figured I'd ask. Nice job and keep developing people
notsotet said:
I'm assuming this doesn't work on the US Snapdragon variants? Figured I'd ask. Nice job and keep developing people
Click to expand...
Click to collapse
It will indeed work for SnapDragon variants friend. It's Samsung specific but still a generic image.
I'm stuck on Google logo
Came from ZRKZ
Factory reset - flashed vendor BRE6, flashed img, rebooted twice into Samsung, booted into google, progress bar keeps going and going... 20 minutes.
MidnightDevil said:
I'm stuck on Google logo
Came from ZRKZ
Factory reset - flashed vendor BRE6, flashed img, rebooted twice into Samsung, booted into google, progress bar keeps going and going... 20 minutes.
Click to expand...
Click to collapse
Have you flashed the 8.1 Endurance Kernel? Sounds like you may still have the pie kernel.
LavaSnake54 said:
Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?
Click to expand...
Click to collapse
Strangely enough Pixel Experience will only boot with Jesec's 8.1 ramdisk that my 8.1 kernel utilises. I'll update my OP to address this.
CodeFox said:
It will indeed work for SnapDragon variants friend. It's Samsung specific but still a generic image.
Click to expand...
Click to collapse
I will need a custom recovery though right? US Snapdragons are bootloader locked so I don't have any way of doing that
JUST FOR FUN...no more no less...
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features:
Click for feature list : https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Always take a proper backup of your running device !
Installation:
0. unlocked, suited twrp ( i'm using twrp3218), oreo bootstack (i'm using universal one) of your choice...you know the drill
1. Copy crDroid zip, 9.0 gapps ( i'm using micro) zip to your device
2. Boot into twrp recovery
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps
5a Reboot and setup phone
6. Flash Magisk 20.4
7. Reboot and enjoy !
Build :
A2017X crDROID 9.0.0 2019.07.30
A2017X crDROID 9.0.0 2019.08.05
A2017X crDROID 9.0.0 2019.08.13
A2017X crDROID 9.0.0 2019.08.23
crDroidAndroid-9.0-20190910-axon7-v5.8
crDroidAndroid-9.0-20190929-axon7-v5.8
crDroidAndroid-9.0-20191017-axon7-v5.9
crDroidAndroid-9.0-20191024-axon7-v5.9
crDroidAndroid-9.0-20191116-axon7-v5.10
crDroidAndroid-9.0-20200114-axon7-v5.11
crDroidAndroid-9.0-20200122-axon7-v5.11
crDroidAndroid-9.0-20200215-axon7-v5.11
crDroidAndroid-9.0-20200312-axon7-v5.12
crDroidAndroid-9.0-20200416-axon7-v5.12
crDroidAndroid-9.0-20200512-axon7-v5.12
crDroidAndroid-9.0-20200514-axon7-v5.12
crDroidAndroid-9.0-20200617-axon7-v5.12
crDroidAndroid-9.0-20200722-axon7-v5.12
crDroidAndroid-9.0-20200814-axon7-v5.12
crDroidAndroid-9.0-20200916-axon7-v5.12
crDroidAndroid-9.0-20201018-axon7-v5.12
LATEST crDroidAndroid-9.0-20201124-axon7-v5.12
GAPPS: https://opengapps.org/
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
KERNEL SOURCE: https://github.com/OrdenKrieger/android_kernel_zte_msm8996 thnx @OrdenKrieger
XDAevDB Information : crDroid 9.0.0, ROM for Axon7
Contributors
@raystef66
Source Code: https://github.com/crdroidandroid/android/tree/9.0
ROM OS Version: 9.x PIE
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel
Version Information : 9.0.0 v5.12
Status: Pure & Stable
Sec. Patches : 2020.11.05
Created : 2019.07.30
Last Updated : 2020.11.24
Great rom, no bugs
Enviado desde mi ZTE A2017U mediante Tapatalk
OP, I'm about to acquire an A2017G device. I'm wondering if you plan on supporting this device for the foreseeable future, because that would be great. Please, reply.
Great work, by the way.
NEW BUILD
crDroid Android-9.0-20190805-axon7-v5.6
*updated to latest sources
*SELinux enforcing
*cts Profile pass without MHPC now
E N J O Y
note : my setup is always with universal v2 bootloader, twrp 3218, micro gapps and magisk 19.3
@dustmalik I will be updating crDROID, viperOS and RR
Which Axon 7 recent ROM can do auto call recording ?
Hello,
It is not in the feature list but I'd like to ask if there is an auto call recording option in this ROM ?
If not, which recent ROM has this function ?
NEW BUILD 2019.08.13
crDroidAndroid-9.0-20190813-axon7-v5.7
changelog :
*v5.7
*august sec.patches
*9.0.0_r46
raystef66 said:
NEW BUILD 2019.08.13
crDroidAndroid-9.0-20190813-axon7-v5.7
changelog :
*v5.7
*august sec.patches
*9.0.0_r46
Click to expand...
Click to collapse
Nice work. Please keep at it.
Axon 7 still not dead.
Thank you for this ROM.
It has auto call recording.
Phone, contact and messaging have white background in dark mode.
GPS is fast (4 s in taxland).
There in no need to install or modify something to revert the hardware keys (back is already on the right).
There is an additional number row on the keyboard.
NEW BUILD 2018.08.23
crDroidAndroid-9.0-20190823-axon7-v5.7
changelog :
* thermal mod included thnx @king1990
Rom version : 5.7
Sec. Patches : 2019.08.01
Kernel : enforcing
THX for keeping the Axon 7 developement alive! :good:
However,I'm still on your Sl!m8b04,as I don't wanna loose the great audio......
So,my question,how do both your Pie ROMS handle the DAC?
I didn't touched my a7 over one year til now and just flashed this rom. I have to say it works absolutely great. Thanks for sharing !!!
Anyone knows a working Dolby magisk module for this rom ???
To the last couple of replies. Every custom ROM now always uses the premium DAC for headphones. No need to worry about that.
As for speaker audio and Atmos, I've tested many different stock roms, custom ROMs and mods including the stock Atmos on stock Oreo and Nougat and I found that the best sounding of all is the recent Dolby Digital plus magisk module.
You won't find it in the repo, but you will if you use Google.
I was a believer that better audio was a reason to stay on stock. Not any more.
Thanks for the rom and some issues/missing features I found
Thanks for the ROM! Works great and I'm not suffering battery drain that I used to get on the AEX rom. There are a few issues/missing features/stuff that I wish the rom had.
Missing:
- Smart Pixels
- Brightness lower/higher buttons
- Ability to change animation speed to values to between 0 and 0.5.
Bug?:
- HARDWARE Navigation buttons were switched to RECENTS - HOME - BACK instead of BACK - HOME - RECENTS. There is NO option to swap the hardware buttons. I fixed this by using the app "Button Mapper"
Kietyo said:
Thanks for the ROM! Works great and I'm not suffering battery drain that I used to get on the AEX rom. There are a few issues/missing features/stuff that I wish the rom had.
Missing:
- Smart Pixels
- Brightness lower/higher buttons
- Ability to change animation speed to values to between 0 and 0.5.
Bug?:
- HARDWARE Navigation buttons were switched to RECENTS - HOME - BACK instead of BACK - HOME - RECENTS. There is NO option to swap the hardware buttons. I fixed this by using the app "Button Mapper"
Click to expand...
Click to collapse
You can switch hardware key flashing this:
https://androidfilehost.com/?fid=3700668719832237510 (mount system / vendor)
Sent from my ZTE A2017X using Tapatalk
https://postimages.org/
OFFICIAL download page : https://crdroid.net/axon7
thnx @gwolfu :highfive:
Are swipe up gestures broken? They usually are if it's the OnePlus style ones.
NEW OTA BUILD IS READY
crDroidAndroid-9.0-20190910-axon7-v5.8
If you're running crDroid you should be notified or you can go into crDroid about settings to download the latest....
changelog :
- Initial crDroid 5.8 release
- sec. patches 2019.09.05
- Improved network signal
- Completely rebase code
- Updated Launcher
- Fixed some Launcher issues
- Updated screen recorder
- Updated translations
https://crdroid.net/axon7
raystef66 said:
NEW OTA BUILD IS READY
crDroidAndroid-9.0-20190910-axon7-v5.8
If you're running crDroid you should be notified or you can go into crDroid about settings to download the latest....
changelog :
- Initial crDroid 5.8 release
- sec. patches 2019.09.05
- Improved network signal
- Completely rebase code
- Updated Launcher
- Fixed some Launcher issues
- Updated screen recorder
- Updated translations
https://crdroid.net/axon7
Click to expand...
Click to collapse
There are over the air updates now for crDroid? Great news!
Thx @raystef66 , time has come for me to move on from your ViperOS to this one of yours
great rom, feels really good so far
I have one issue though I tried switching back / recents using your Soft key reverse switch (twrp and magisk) because I actually would like to have back on the left side but it didn't work (although the twrp aroma installer offered it as second option?)
Is there another switch I have to set in the rom in order to switch softkeys? @raystef66
---
I read through your post and what the change needed to be made and ended up editing the kl file myself through adb. I had to do it in recovery mode though which felt weird, but worked in the end.
fleity said:
great rom, feels really good so far
I have one issue though I tried switching back / recents using your Soft key reverse switch (twrp and magisk) because I actually would like to have back on the left side but it didn't work (although the twrp aroma installer offered it as second option?)
Is there another switch I have to set in the rom in order to switch softkeys? @raystef66
---
I read through your post and what the change needed to be made and ended up editing the kl file myself through adb. I had to do it in recovery mode though which felt weird, but worked in the end.
Click to expand...
Click to collapse
You need to mount vendor and system before flash