After spending a couple of weeks searching for LineageOS for the A6 (not A6+), I've discovered that there's very little support for this device. Why is this?
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Kimitzuni said:
So it's not so much as ROMs for the A6 but instead more GSIs for the A6? If I'm understanding correctly
Click to expand...
Click to collapse
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
nqnxev said:
Probably smaller userbase if we compare with other devices. Furthermore many things are common for most of the Exynos 7870 devices. Lack of roms shouldn't bother you, because we have GSI, so in this way you can run Android 11 and even Android 12 on A6.
Also, part of community is active on Telegram.
My A6 works very well on Lineage R mod (Android 11).
Click to expand...
Click to collapse
sorry lineage R mod support for A6+ S605G ?
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Lothaen said:
Getting confused with the different versions for A6 / A6+ etc.
I have an SM-600FN model which I think is A6 (not S or +).
It's currently running stock 10 - is there a good 64bit ROM for this? I was thinking it'd be easy to pick out but it is old... I could only see an Android 6 64bit ROM?
Click to expand...
Click to collapse
For A600FN pretty stable arm64 rom is RadicalQuack. arm64 GSI is also possibile to run on arm64 vendor, but it's not perfect (unstable).
akbare said:
sorry lineage R mod support for A6+ S605G ?
Click to expand...
Click to collapse
Read this thread:
how downgrade sm-a605fn from android 10 to 9
Hello, I have a Samsung Galaxy A6+ with latest fw installed. (italian version) A605FNXXU7CUD4 The phone is totally useless after the update to android 10, it takes AGES to perform any action, even open the Camera or open a Message. Already...
forum.xda-developers.com
Maybe it will be helpful.
nqnxev said:
Maybe not "instead", but they just work:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
1. Go to custom recovery (recommended will be OrangeFox R11.0).
2. Wipe partitions: cache, dalvik, data, vendor, system.
3. Choose GSI from link above (I can recommend Lineage R mod but you can try different ones; choose arm32_binder64 vndklite builds), download, extract and flash it as "System Image" through custom recovery.
4. Flash vendor for A6 via custom recovery.
5. Optionally flash any custom kernel for A600X.
6. Reboot to system.
If you want typical OneUI rom then use RadicalQuack or JynxOS.
Click to expand...
Click to collapse
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
nukicius said:
never mind. i found a 64 bit vendor on this forum and decided to try it, and now it works.
just to clarify, the arm images werent working either, so its not just working because im using the right architecture
Click to expand...
Click to collapse
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
nukicius said:
hey, ive been trying to follow this for a while now but it doesnt work at all for me. im on an a600-fn device, and the only thing thats worked for me here is radicalquack, but thats android 10, and im looking for a way to upgrade my phone to android 11 or 12
everytime i try these instructions out, and i boot into the system, it just takes me to the downloading screen. im really confused, can anybody help me?
Click to expand...
Click to collapse
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Viper The Ripper said:
What steps did you follow?
I'm looking for it too, but to no avail. ALL Ares treble kernels that support 64 bits send me to download mode after flashing them.
Click to expand...
Click to collapse
i just used a lineageos 18 gsi image and the treble vendor, but it turns out that while it did get to the boot screen that says lineageos (which gave me tremendous amounts of hope), it would NEVER boot up, so dont do what i did i guess lol
currently, im trying what nqnxev told me, and it should hopefully work
nqnxev said:
It brought you to download mode probably just because you used wrong architecture of GSI. Vendor from my previous post is intended for arm32_binder64 (A64 - not arm64) vndklite GSI images.
Click to expand...
Click to collapse
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
nukicius said:
i got the correct image (lir-v316-220325-a64-bgZ-lite.img) and vendor (A6-Android11-stock-vendor.zip), flashed them with orangefox and its just bootlooping
Click to expand...
Click to collapse
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
nqnxev said:
Did you wipe all needed partitions before that (cache, dalvik, system, vendor, data)?
Click to expand...
Click to collapse
of course i did, thats what i always do
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
nqnxev said:
Strange. Flash also H-Kernel (as boot image):
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/releases/download/H-V1.0-ENFORCING/H-KERNEL_V1.0_A600X.img
Click to expand...
Click to collapse
it works!!! i did want to use the kernel at first, but i didnt know how i should flash it, thanks for clarifying!
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
nukicius said:
hey, is there also a vendor for android 12? i want to give lineageos 19 a shot, and it doesnt work very well with the android 11 vendor (obviously)
i dont absolutely need it, i can stick with lineageos 18, but i just wanna try it out yk
Click to expand...
Click to collapse
Android 12 works fairly well on the same vendor, but flash this recovery at first, because older OrangeFox can stuck while boot with Android 12.
Related
Recently I saw that there appeared a new kind of roms which need a special recovery and, as I could find, have something to do with easier update of Android version. Also I have seen a project: https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659 which claims to have one rom file that can be flashed on a impressing number of roms. I saw the first comment by author which has a method to know if a device has support for treble and it is refered to run "treble check" app from play store on official rom. The thing is that I experimented and installed treble rom (lineage OS) from redmi 4x thread and did the check if the device is supported (the screenshot is attached below) and saw that on this rom it is supported, in contrary to MIUI. The question is about this controversion: is this device supported or not? Can I flash these ROMs from the thread? Are treble ROMs really like a universal flashable file for multiple devices?
If you flash GSI (Generic System Image) it will work on our device. Yes Treble roms are universally flashable if GSI is used, with some minimal modification for device specific. So porting roms will easier, and less time consuming.
Anyone can correct me, if i 'm wrong.
drthrax07 said:
If you flash GSI (Generic System Image) it will work on our device. Yes Treble roms are universally flashable if GSI is used, with some minimal modification for device specific. So porting roms will easier, and less time consuming.
Anyone can correct me, if i 'm wrong.
Click to expand...
Click to collapse
So if I flash the rim from this link specifically on redmi 4x, the device will have no harm at all?
ViorelRj said:
So if I flash the rim from this link specifically on redmi 4x, the device will have no harm at all?
Click to expand...
Click to collapse
Yes, but follow the instruction there. Our device is A-only device. Use the special recovery here for flashing. Or flash the lineageos 15.1 treble edition first just find in on our device forum.
drthrax07 said:
Yes, but follow the instruction there. Our device is A-only device. Use the special recovery here for flashing. Or flash the lineageos 15.1 treble edition first just find in on our device forum.
Click to expand...
Click to collapse
I have seen that seamless updates require A and B partition. I want to know what I am loosing with this device by having only the A partition (what really is seamless update and how does it work)? P.S. sorry for being annoying.
ViorelRj said:
I have seen that seamless updates require A and B partition. I want to know what I am loosing with this device by having only the A partition (what really is seamless update and how does it work)? P.S. sorry for being annoying.
Click to expand...
Click to collapse
As far as i know the seamlees update works this way:
In slot A you have installed any OS Example Android 8.1
In slot B there is a backup of the OS Om slot A
This mean you can install the ota of Android P (example) in one of the slots while you are on Facebook for example
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )
Good Morning/Evening ladies and gentlemen, boys and girls, this is a talk of Android 10.0 for Samsung Galaxy S5.
Yes, LineageOS 17 for klte is now here. In testing state.
Just talk, share and star this thread to see the updates.
Updates and download links moved. https://forum.xda-developers.com/ga...-samsung-galaxy-s5-talk-t3965502/post80268759
I hope someone out there could remember our old beloved S5 to work on the Android 10 Rom
And I pretty much hope developers take their time on Android 9 before they jump to 10. Android 8 for S5 is one to skip, because the development stopped to early. Android 9 should be bugfree and with all the good features of before, if possible as smooth as Android 7. Make the foundation solid before going on, so I'm pretty happy that there is no major work on Android 10 for S5 right now. Starting the development in half a year would be more than early enough. Please don't repeat the cycle of Android 8 for S5 ever again, coming up fast and being skipped as fast.
MysteryIII said:
And I pretty much hope developers take their time on Android 9 before they jump to 10. Android 8 for S5 is one to skip, because the development stopped to early. Android 9 should be bugfree and with all the good features of before, if possible as smooth as Android 7. Make the foundation solid before going on, so I'm pretty happy that there is no major work on Android 10 for S5 right now. Starting the development in half a year would be more than early enough. Please don't repeat the cycle of Android 8 for S5 ever again, coming up fast and being skipped as fast.
Click to expand...
Click to collapse
Unfortunately, LineageOS 17 has been out unofficially to some devices. Lucky tho, klte wasn't on the list.
OfficialJohnGL4 said:
Unfortunately, LineageOS 17 has been out unofficially to some devices. Lucky tho, klte wasn't on the list.
Click to expand...
Click to collapse
Android 8 was the one with significant changes that took a lot of time to get working. 9 and 10 are more like 8.2 and 8.3. I wouldn't expect LineageOS 17 to be significantly less stable.
Also, please don't link to that site, OP. It's nothing but clickbait, spam, and fake news.
Couchy said:
Android 8 was the one with significant changes that took a lot of time to get working. 9 and 10 are more like 8.2 and 8.3. I wouldn't expect LineageOS 17 to be significantly less stable.
Also, please don't link to that site, OP. It's nothing but clickbait, spam, and fake news.
Click to expand...
Click to collapse
Actually it isn't. This photo explains it.
If you don't believe me then check it yourself.
(Kind of offtopic) Also in OnePlus 6 forums of XDA LineageOS 17 has been released for it (unofficially).
In conclusion, fake news? Nope.
I also included that it needs to wait. No devs can do it instantly when the development has begun.
Updates on Android 10 ROMs for Samsung Galaxy S5s:
13/9/19: LineageOS 17 is ready for some devices, unofficially, Expect to have LineageOS 17 to be on Samsung Galaxy S5 Soon.
19/9/19: HavocOS just release official Android 10 ROM. The first official Android 10 custom ROM. As S5 is supported. It will happen soon. (A month I think?)
28/10/19: First unofficial LineageOS 17 klte has released.
Android 10 ROMs:
https://www.cyanogenmods.org/download-lineageos-17/#SAMSUNG
(Samsung Galaxy S5 users need to wait)
Raynelfss said:
You can actually boot Note 3's LineageOS 17.1 builds on the S5, reportedly. I tried that yesterday and I can confirm it works. But obviously it has a whole lot of bugs so it is not recommended to do it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-3/development/rom-lineageos-17-0-t3971019
Couchy said:
Let's make it (un)official:
https://forum.xda-developers.com/galaxy-s5/unified-development/rom-lineageos-17-0-klte-t3992419
Click to expand...
Click to collapse
Android 10 Kernels:
[Empty, I think we should wait a little longer]
@OfficialJohnGL4
you should edit your opening post and put all the information there. :good:
This would be much easier for the people to get all the information about Q for S5
just a suggestion.
regards
j1gga84 said:
@OfficialJohnGL4
you should edit your opening post and put all the information there. :good:
This would be much easier for the people to get all the information about Q for S5
just a suggestion.
regards
Click to expand...
Click to collapse
Thanks, but I am afraid that words limit is the issue, so yeah. If there is not issue, I will edit the text to just "Moved back to top". Thanks.
Reserved
As of now, still waiting for Android 10.
Project Mainline is the reason, which means that ROM developers won't have to update Security Patches if they want to.
You can actually boot Note 3's LineageOS 17 builds on the S5, reportedly. I tried that yesterday and I can confirm it works. But obviously it has a whole lot of bugs so it is not recommended to do it.
Now kind of off topic, but I just open up a thread about Treble for S5, if any devs wanna see it then link here:
https://forum.xda-developers.com/galaxy-s5/general/dev-talk-treble-klte-t3972763
If someone is interested to try the LineageOS GSI image, then here it is for A-only device:
LineageOS 17 A-only GSI: https://github.com/ZJRDroid/firmwar...s/LineageOS-17.0-Aonly-10-20190912-GSI.img.7z
Zygote fix v2: https://www.cyanogenmods.org/downloads/zygotefix-v2-for-android-10/
Permissiver v5: https://www.cyanogenmods.org/downloads/permissiver-v5-for-android-10-gsi/
IMPORTANT:
Backup every partition and keep it in a safe place before making any changes to your phone.
- Extract the above GSI compressed zip file where you will get system.img and vbmeta.img
- Wipe every partition except vendor and internal memory. IMPORTANT: Most likely Galaxy S5 won't have a vendor partition. Even if it has, don't wipe vendor partition.
- Flash the images via TWRP or fastboot utility.
- Once done, boot into TWRP and flash the Permissiver v5 and Zygote fix v2 zip files.
Try to boot and see if you are able to boot into LineageOS 17?
Let me know!
shibaa987 said:
If someone is interested to try the LineageOS GSI image, then here it is for A-only device:
LineageOS 17 A-only GSI: https://github.com/ZJRDroid/firmwar...s/LineageOS-17.0-Aonly-10-20190912-GSI.img.7z
Zygote fix v2: https://www.cyanogenmods.org/downloads/zygotefix-v2-for-android-10/
Permissiver v5: https://www.cyanogenmods.org/downloads/permissiver-v5-for-android-10-gsi/
IMPORTANT:
Backup every partition and keep it in a safe place before making any changes to your phone.
- Extract the above GSI compressed zip file where you will get system.img and vbmeta.img
- Wipe every partition except vendor and internal memory. IMPORTANT: Most likely Galaxy S5 won't have a vendor partition. Even if it has, don't wipe vendor partition.
- Flash the images via TWRP or fastboot utility.
- Once done, boot into TWRP and flash the Permissiver v5 and Zygote fix v2 zip files.
Try to boot and see if you are able to boot into LineageOS 17?
Let me know!
Click to expand...
Click to collapse
SM-G900I
Advanced wiped Dalvik / ART Cashe, System, Data and Cashe.
I did NOT wipe Internal Storage
Attempted to flash image (checked boot partition)
Result was "Size of image is larger than target device"
How does one determine an "A" only device?
Any ideas??
pmduper said:
SM-G900I
Advanced wiped Dalvik / ART Cashe, System, Data and Cashe.
I did NOT wipe Internal Storage
Attempted to flash image (checked boot partition)
Result was "Size of image is larger than target device"
How does one determine an "A" only device?
Any ideas??
Click to expand...
Click to collapse
What were the options you had for installation of IMG.
Samsung Galaxy S5 doesn't have treble yet, at least for now.
Any devs who want to try porting treble to S5 could try to use the GSI, but however no devs wanted to try it.
LokifiedMee said:
What were the options you had for installation of IMG.
Click to expand...
Click to collapse
Boot or recovery option
Raynelfss said:
You can actually boot Note 3's LineageOS 17.1 builds on the S5, reportedly. I tried that yesterday and I can confirm it works. But obviously it has a whole lot of bugs so it is not recommended to do it.
Click to expand...
Click to collapse
how do you do this? I tried and it didn't work maybe I didn't do it right.
ItsMeToby said:
how do you do this? I tried and it didn't work maybe I didn't do it right.
Click to expand...
Click to collapse
You have to use a modified boot.IMG. Also, you need to modify the updater script from the file. But don't worry, you shouldn't even try that.
ItsMeToby said:
how do you do this? I tried and it didn't work maybe I didn't do it right.
Click to expand...
Click to collapse
I also tried but i think you have to fool your recovery a little bit.
I am using Samsung m31, Exynos 9611, this phone is Project Treble supported. Does anyone tried GSI?
As it is running on exynos any chance?
Yes, it runs. I am currently using Corvus OS on M31s.
Install TWRP as mentioned for your device and then follow this guide
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
Khushtaur3123 said:
Yes, it runs. I am currently using Corvus OS on M31s.
Install TWRP as mentioned for your device and then follow this guide
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
Click to expand...
Click to collapse
Can you explain how you installed corvus os on m31s?
Thanks in advance
Installed TWRP as mentioned in the forum.
Followed the steps for TWRP way of installing GSI in the link of my precious posts in this thread. Normally, boot into the GSI. That's it.
PS - Only Corvus OS allows SafetynetBypass. I have tried it on phhussons GSI and haven't been able to pass safetynet. Even dabbled with magisk hide prop config. Wasn't able to achieve anything.
Khushtaur3123 said:
Installed TWRP as mentioned in the forum.
Followed the steps for TWRP way of installing GSI in the link of my precious posts in this thread. Normally, boot into the GSI. That's it.
PS - Only Corvus OS allows SafetynetBypass. I have tried it on phhussons GSI and haven't been able to pass safetynet. Even dabbled with magisk hide prop config. Wasn't able to achieve anything.
Click to expand...
Click to collapse
Also, no GSI provides stable experience for long term as the stock with root. I am now running stock on my M31s as I need a working phone for use.
Khushtaur3123 said:
Also, no GSI provides stable experience for long term as the stock with root. I am now running stock on my M31s as I need a working phone for use.
Click to expand...
Click to collapse
Ok, do we have any bugs with corvus os?
Yeah, you might encounter some unstability. But overall experience is really good. The phone is responsive most of the time. You could try if you want to see what it is. I haven't gone back to Corvus, ever since Android 12 update came, so maybe the new firmware might have added some fixes.
Khushtaur3123 said:
Yeah, you might encounter some unstability. But overall experience is really good. The phone is responsive most of the time. You could try if you want to see what it is. I haven't gone back to Corvus, ever since Android 12 update came, so maybe the new firmware might have added some fixes.
Click to expand...
Click to collapse
Yeah, I'm fascinated by the responsiveness of the corvus os. And this new android stock update is eating up more RAM. And I feel one UI 4.1 is not good as 3.1.
I'm thinking of weather to switch to gsi or not.
For long usability, what do you think will be the better option?
Switch to GSI or reset the existing stock rom user data?
Have you root
dinesh99639 said:
Yeah, I'm fascinated by the responsive of the corvus os. And this new android stock update is eating up more RAM. And I feel one UI 4.1 is not good as 3.1.
I'm thinking of weather to switch to gsi or not.
For long usability, what do you think the better option?
Switch to GSI or reset the existing stock rom user data?
Click to expand...
Click to collapse
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain floating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Edit spelling
Khushtaur3123 said:
Have you root
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain gloating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/t/guide-no-root-complete-samsung-oneui-optimization.4376755/
You will definitely need a second phone if you want to try GSI
Khushtaur3123 said:
Have you root
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain gloating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Click to expand...
Click to collapse
No, I haven't rooted me phone. I'll try one ui optimization .
Thank you for your suggestion
You could always try another GSI. https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Khushtaur3123 said:
You will definitely need a second phone if you want to try GSI
Click to expand...
Click to collapse
Oh, I don't have second phone. I think it is better to stay on stock rom.
Thank you very much
Khushtaur3123 said:
You will definitely need a second phone if you want to try GSI
Click to expand...
Click to collapse
Are volte and calls working fine?
Don't expect VoLTE on exynos on any GSI. Calls work OK.
Looking for A600G andriod 11 gsi's stable enough please
John072021 said:
Looking for A600G andriod 11 gsi's stable enough please
Click to expand...
Click to collapse
If you're able to install TWRP, you should be able to run any GSI you want.
I have written a guide here but it is your responsibility to know what you are doing.
Read also that thread, there are at least two guides for A600X:
Question about lack of A6 ROMs
After spending a couple of weeks searching for LineageOS for the A6 (not A6+), I've discovered that there's very little support for this device. Why is this?
forum.xda-developers.com
It work thankyo
I'ved been using it for a day now so far so good
Using this guide for a600g
Post in thread 'Question about lack of A6 ROMs' https://forum.xda-developers.com/t/question-about-lack-of-a6-roms.4399123/post-86381773
By the way I used andriod 10
I used twrp 3.6.0 not (3.6.2)not stable and after format data then install fox via twrp and repeated the format data, reboot recovery
And after that I flashed rmm and multi Samsung disabler( tried to boot to Samsung stock but failed)so, I installed gsi by this guide Post in thread 'Question about lack of A6 ROMs' https://forum.xda-developers.com/t/question-about-lack-of-a6-roms.4399123/post-86381773
nqnxev said:
Read also that thread, there are at least two guides for A600X:
Question about lack of A6 ROMs
After spending a couple of weeks searching for LineageOS for the A6 (not A6+), I've discovered that there's very little support for this device. Why is this?
forum.xda-developers.com
Click to expand...
Click to collapse
Hey brother just to ask what os ur using right now?
Lineage 18 r mod when playing games while playing it just freeze and make a sound like its over use how to fix?
John072021 said:
Lineage 18 r mod when playing games while playing it just freeze and make a sound like its over use how to fix?
Click to expand...
Click to collapse
It's hard to say, try maybe flashing different kernel at first, and if it won't help ten play with different GSI's from the list:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Choose arm32_binder64 vndklite images as always.
John072021 said:
Hey brother just to ask what os ur using right now?
Click to expand...
Click to collapse
Stock + H-Kernel, because I'm using SmartView.
Is it ok to flash andriod 13?
John072021 said:
Is it ok to flash andriod 13?
Click to expand...
Click to collapse
You can try. but don't use old custom recovery, because Android 12+ can cause recovery bootloop. Try with this OrangeFox. Such GSI gives no guarantee of proper work on that A600X vendor.
Brother how to flash H kernel on stock?
John072021 said:
Brother how to flash H kernel on stock?
Click to expand...
Click to collapse
As usual - in custom recovery (flash as boot image).
Working on andriod 10?
Sure, works perfectly.