Related
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.
otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
How can I do this? Can you help me please?
jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST
Note 8 Pro is MTK Device
Hello,
I'm in quite the panic, as this is my daily driver.
It has been about 6 years since I have been on the XDA scene, and boy do I feel silly. I made the cardinal sin of not making back ups and plunging into a exciting tutorial on here to enable voLTE on my ROG 2. At some point the requested commands were executed as per the thread:
fastboot erase modemst1
fastboot erase modemst2
Click to expand...
Click to collapse
Since this point, my phone has been completely without service, and after nearly 12 hours of trying numerous fixes, I ask for help of the kind users of XDA once again.
My phone does have the boot loader unlocked, and is rooted. I have tried nearly every IMEI and EFS restore option on here, and even went as far as trying similar QCN and EFS flashes of other phones with the same chipset to no avail.
I believe at this point I need a kind user to upload their EFS partitions, or QCN backups (of course with their information masked) so I may flash my phone and edit my IMEI in the image. Or if anyone else knows of a better method im all ears.
Thank you all in advanced.
i guess someone earlier had a similar issue and was provided with the QCN file.
apollo3x said:
i guess someone earlier had a similar issue and was provided with the QCN file.
Click to expand...
Click to collapse
That would be lovely Thanks for the info.
Heyo!
My Mi9T after updating to miui 12 stopped getting sim card signal and a local repair shop said it's because the phone has no IMEI number!????
What should i do now? How to resolve this issue?
Flash persist.img in recovery if you have a backup....
3 STEPS for you :
1. well , if you don't have efs/modemst's backups to restore, ITS NOT LOOKING GOOD.
2. next logical step try a fastboot rom flash , if IMEI is not restored , ITS BAD.
3. your device needs an IMEI repair , better done by a proffessional (he uses some hardware to repair the imei).
Best of luck to you
nick88 said:
Flash persist.img in recovery if you have a backup....
Click to expand...
Click to collapse
I've never messed with this phone as far as flashing stuff, root etc, where can i find it?
urbanmec said:
3 STEPS for you :
1. well , if you don't have efs/modemst's backups to restore, ITS NOT LOOKING GOOD.
2. next logical step try a fastboot rom flash , if IMEI is not restored , ITS BAD.
3. your device needs an IMEI repair , better done by a proffessional (he uses some hardware to repair the imei).
Best of luck to you
Click to expand...
Click to collapse
Hey, i've never rooted, installed roms nor anything like that in this phone so im not too sure i have "efs/modemst's" to restore... Where would i find those?
ashye said:
Hey, i've never rooted, installed roms nor anything like that in this phone so im not too sure i have "efs/modemst's" to restore... Where would i find those?
Click to expand...
Click to collapse
You cannot find them, they are specific to your phone , they have info on your IMEI numbers and device specific IDs ,so flashing other people's files would mess up your phone even more.
DO not flash FASTBOOT Image unless you backup your "persist" partition as you would lose other important stuff that cannot be recovered.
You have to root your phone , backup your persist partition , then flash Fastboot ROM to see if your IMEIs are restored.
If not , then IMEI repair is the way to go , just find a good repair shop and they will do it for you.
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Shas45558 said:
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Click to expand...
Click to collapse
Thank you for a response! I used sp because i hardbricked my phone...
me_smart34 said:
Thank you for a response! I used sp because i hardbricked my phone...
Click to expand...
Click to collapse
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Shas45558 said:
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Click to expand...
Click to collapse
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
Without imei is it possible to unlock bootloader or root your devices
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Shas45558 said:
Without imei is it possible to unlock bootloader or root your devices
Click to expand...
Click to collapse
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
VD171 said:
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Click to expand...
Click to collapse
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
me_smart34 said:
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
Click to expand...
Click to collapse
No. It will never write or recover your IMEI.
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
me_smart34 said:
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
Click to expand...
Click to collapse
Unhappy, maui meta can't help you.
You need to follow the guide I've sent for recovering only imei 2.
Good luck
VD171 said:
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Click to expand...
Click to collapse
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Slaventei2 said:
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Click to expand...
Click to collapse
I'm not sure, sorry. I'm sure only for Redmi Note 8 Pro.
You can try and then tell us the result too
Hello guys, after some struggle trying to unbrick my poco m3 pro, i faced a new probem, my IMEI has gone, as a noob that i am, i didn't made any kind of backup, i'm trying alot of ways, and still i didn't had any luck to re-write my IMEI (i still jave the numbem on the box of the phone) to the device, i'm using linux, almost everything that i found is to windows, does jave any kind of tool for linux, or i'll have to put windows on my laptop just for this porpouse?
there is anychance to use mtkdrive tool, the same used to bypass security for sp tools to do this ?
thanks for now
if your mobile services works, write imei is not necessary. and it's a dangerous operation. so if your devices now works fine, my suggestion is DON'T TOUCH ANYTHING
all my old phones that after modding lost originals imei worked without problems
a mobile sim could work also with all imei numbers=0
sadly my mobile service don't work, i keep zero signal, and when i try to get IMEI numbers on Settings > About device, it says unknown on both IMEis
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
wetito said:
ok
first try your sim into another device to be sure is not damaged
second search xiaomi redmi note 10 5g fastboot engineering rom and flash. this rom should repair some high problems like your.
if boot and all work fine, update to miui13. good luck
Click to expand...
Click to collapse
thx, i'll try to find that rom, i already tried my sim on another devices, and works flawless
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
wetito said:
MTK IMEI Repair Tool Download (All Version) Updated 2022 | Mi Account Guide
When you have an MKT Android device, you can use an MTK IMEI Tool to flash or repair IMEI on your device. In order to make your damaged device functional
miaccountguide.com
i found this tool... maybe should work. but u had to test by yourself... this website have other utility that u could try. but now u have signal? data mobile?
Click to expand...
Click to collapse
in mtk without box/server patch only sim 2 repair
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
shinobusensui said:
not work nv data/ram with out patch firmware ect,you only can return imei 2 for original.
Click to expand...
Click to collapse
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
wetito said:
U tryed put SIM on slot 2 with imei2 restored? Coul be a solution? Could u post a screenshot of phone information? (Tap 4 time internal storage
Click to expand...
Click to collapse
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Did you find a fix? And where did you go wrong? Please let us know the mistakes you made so that we don't.
shinobusensui said:
its only information and you can use Maui Meta in Meta mode if you enter edl/testpoint, for me the first time lost two imei only return The Second imei, but send to waranty and change the Phone.
of coursed use a Semi Profesional Tools.
Click to expand...
Click to collapse
ok, so at least one of yours sims work. goog luck
Yonecloud said:
so... after long searchs and alot of re-bricks, i finally managed to instal an ENG rom, and had found some NVRAM and NVDATA files to flash too, with those i finally made to get some signal, but still my IMEIs is unknown when i get to about phone, and when i type *#06# i get nothing, not even 0000's. now how do i update from eng rom to a more updated version of miui without losing those configuration files
Click to expand...
Click to collapse
can i ask where did you get the eng rom?