I Have A Few Question Please Explained To Me :
1. Does TWRP Recv In Redmi Note 10 5G (Camelian) Only Has Broken Touch TWRP Only??
2. And I Know This Phone Doesn't Have A Recovery Partition So Can Anyone Explain To Me Does I Have To Make The Recv Partition 1st To Installing TWRP Or Just Flashing TWRP Via ADB Fast Boot? If Someone Know How To Make A Recv Partition On This Phone Please Making A Guide.
3. And Last My Question, I Found This Thread :
[TWRP][UNOFFICIAL][3.6.0]POCO X3 GT / REDMI NOTE 10 PRO 5G
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
But A Few Days Ago I Try It Via ADB It Say Failed Max Size, What Does It Mean? And Does That Thread TWRP Is Same For Camelian?
That's My Question, Thanks Before And Best Regards
1. That TWRP does not work. Even if you enter correct PIN, it will not proceed.
2. THIS PHONE DOES NOT HAVE A RECOVERY PARTITION BECAUSE OF VIRTUAL A/B
=> You MUST boot into TWRP from fastbootd
*Flashing TWRP directly into boot partition will give you a bricked phone.
How to:
1. Enter fastboot mode
2. Use this command to enter fastbootd
Code:
fastboot reboot fastboot
3. Use this command to boot into TWRP:
Code:
fastboot boot twrp.img
4. The problem is that current TWRP does not work. We need to wait for a good dev to make a working twrp.img for Redmi Note 10 5G/Poco X3 GT
Your last question - That is fastboot, not fastbootd. On Redmi / Pocophone you need to enter fastbootd to custom flash.
nguadien said:
1. That TWRP does not work. Even if you enter correct PIN, it will not proceed.
2. THIS PHONE DOES NOT HAVE A RECOVERY PARTITION BECAUSE OF VIRTUAL A/B
=> You MUST boot into TWRP from fastbootd
*Flashing TWRP directly into boot partition will give you a bricked phone.
How to:
1. Enter fastboot mode
2. Use this command to enter fastbootd
Code:
fastboot reboot fastboot
3. Use this command to boot into TWRP:
Code:
fastboot boot twrp.img
4. The problem is that current TWRP does not work. We need to wait for a good dev to make a working twrp.img for Redmi Note 10 5G/Poco X3 GT
Your last question - That is fastboot, not fastbootd. On Redmi / Pocophone you need to enter fastbootd to custom flash.
Click to expand...
Click to collapse
So.. the other word is that there is no TWRP for Redmi Note 10 5G/Camellian Phone right now.... i hope there is one for this phone... really.. because i have 2 phone this camellian one and the other is oppo a9 2020 (left by my late sister) that never has root or twrp either, but thanks anyway for answering my question
Jerzey84 said:
So.. the other word is that there is no TWRP for Redmi Note 10 5G/Camellian Phone right now.... i hope there is one for this phone... really.. because i have 2 phone this camellian one and the other is oppo a9 2020 (left by my late sister) that never has root or twrp either, but thanks anyway for answering my question
Click to expand...
Click to collapse
Though it doesn't have a TWRP, it can root + flash custom GSI roms (arm64) well. I'm using GSI Android 11 Crdroid right now and very happy with it.
new update. touch screen dont work. a new stable version is under development
Poco M3 Pro 5G
Poco M3 Pro 5G all information are available here like Gcam , Custom ROM , and much much more So Join us Today. #gcam #pocoM3pro #pocomobile #mypoco #pocom3pro5g #poco_m3_pro_5g
t.me
I tried this and surprisingly it works. I bought a $1 Type-C to USB 3.0 and TWRP allowed me to use mouse instead of touchscreen like a charm.
Currently trying different roms in TWRP, if any progress I will report back later.
wetito said:
new update. touch screen dont work. a new stable version is under development
Poco M3 Pro 5G
Poco M3 Pro 5G all information are available here like Gcam , Custom ROM , and much much more So Join us Today. #gcam #pocoM3pro #pocomobile #mypoco #pocom3pro5g #poco_m3_pro_5g
t.me
Click to expand...
Click to collapse
Hope it will release soon than i sell this phone for realme lol
Jerzey84 said:
Hope it will release soon than i sell this phone for realme lol
Click to expand...
Click to collapse
TWRP works, just follow video above.
For TWRP file, here:
twrp_UNOFFICIAL.img
drive.google.com
nguadien said:
I tried this and surprisingly it works. I bought a $2 Type-C to USB 3.0 and TWRP allowed me to use mouse instead of touchscreen like a charm.
Currently trying different roms in TWRP, if any progress I will report back later.
Click to expand...
Click to collapse
Lol i don't have a mouse or keyboard something like that, and truth is i prefer wait for fix the touch than using 3rd app or sumthin like using mouse keyboard external, and truth is 1st i regret this phone because seller cheated to me, i buy online and go for Note 10 pro but the seller cheated to me and send this phone than the pro one, i cannot resend back to seller because this phone is my sister has buy for me and after one day buy this phone for me she suddenly ill and death... I cannot accessing her app because it's pasworded and 2nd i try emulator aether sx2 (ps2) and dolphin (Wii & GC) with this phone it's suck too much lagging so it not powerfull enough but for pubg it run just fine (shame i don't like pubg at all)
Don't whine for something you own. If you whine you don't deserve it.
For emulators, use PC instead of smaller devices like phones.
If you have the intention of playing games/emulators on your phone, buy gaming phones (Black Shark, Poco x3 GT, etc.)
You asked for a solution - TWRP and I provided one (by using Type-C to USB for mouse, costing $0.5) and you spat to my face with your rants.
So what's your problems? You created them and suffered on your own. I don't have anything to do with them.
nguadien said:
Don't whine for something you own. If you whine you don't deserve it.
For emulators, use PC instead of smaller devices like phones.
If you have the intention of playing games/emulators on your phone, buy gaming phones (Black Shark, Poco x3 GT, etc.)
You asked for a solution - TWRP and I provided one (by using Type-C to USB for mouse, costing $0.5) and you spat to my face with your rants.
So what's your problems? You created them and suffered on your own. I don't have anything to do with them.
Click to expand...
Click to collapse
No i dont mean to you but i prefer not using something like that, usb or mouse because really i cannot buy them, and yes you are right, i just commented for buying pc for emulator than phone because same price but different results so thanks anyway maybe i will wait until it's fix, thanks for your infos bro
Jerzey84 said:
No i dont mean to you but i prefer not using something like that, usb or mouse because really i cannot buy them, and yes you are right, i just commented for buying pc for emulator than phone because same price but different results so thanks anyway maybe i will wait until it's fix, thanks for your infos bro
Click to expand...
Click to collapse
you can install twrp manager for pc
wetito said:
you can install twrp manager for pc
Click to expand...
Click to collapse
That's the problem, i don't have either pc nor notebook but i plan to buy pc since yesterday
nguadien said:
For TWRP file, here:
Click to expand...
Click to collapse
This gets stuck for me at the TWRP splash screen, which I notice says 3.5.2_11-0 at the bottom. I assume it's the same image that was posted on Telegram (which was supposed to be 3.6.0), but I can't find any way of downloading that
Important notice:
+ You cannot flash TWRP to boot partition. You must boot into TWRP, using adb in fastbootd.
+ At touch screen, you must plug a mouse in by using Type-C to USB adapter
For adb commands, check my other posts on this forum.
For 3.6.0 TWRP, I just uploaded it here: https://drive.google.com/file/d/1HLRZQ3zEhRf_wbafzo1Rn9pVUFfl0KZk/view?usp=sharing
For me the most important step was finding a Type-C adapter to recognize mouse, which took a bit of time.
nguadien said:
3.5.2 works for me. Try this file: https://www.mediafire.com/file/iqcowjxbxvdvhsg/[email protected]/file
Important notice:
+ You cannot flash TWRP to boot partition. You must boot into TWRP, using adb in fastbootd.
+ At touch screen, you must plug a mouse in by using Type-C to USB adapter
For adb commands, check my other posts on this forum.
For 3.6.0 TWRP, I just uploaded it here: https://drive.google.com/file/d/1HLRZQ3zEhRf_wbafzo1Rn9pVUFfl0KZk/view?usp=sharing
For me the most important step was finding a Type-C adapter to recognize mouse, which took a bit of time.
Click to expand...
Click to collapse
This is the 1st TWRP I got to work on my phone. The others I've tried either stuck at splash screen or couldn't decrypt data.
So big thanks for this. I'm still trying to get my head round the whole A/B thing.
nguadien said:
+ You cannot flash TWRP to boot partition. You must boot into TWRP, using adb in fastbootd.
Click to expand...
Click to collapse
I was able to flash 3.6.0 to the boot partition and boot into it with "fastboot reboot recovery", just need to put the original boot image back afterwards. Unfortunately I got an error immediately when I tried to install the MIUI 13 recovery zip. Might need to put stock MIUI 12 back on it first (the phone currently has the dotOS GSI installed) or do some kind of wipe.
i need twrb for redmi note 10 5g android 12 miui13
i traied to flash the old twrb but my phone did't open
Related
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
just calm down and try to unlock bootloader again by (miflash_unlock) then install in computer (adb-setup-1.4.3) then keep press on power and volume down button for fastboat then open miflash (version=2017.4.25.0) and connect your phone and press refresh to see your phone on list then download India Stable Firmwares version in same thread you mention and unzip the file and unzip the result file then you will see 12 file (images/ flash_all.bat .....) and in miflash choose the file and press flash and wait... when its done your phone will work but will give account is locked just connect with wifi and write your micloud password and done .
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Miflash only works on an unlocked bootloader. It appears that you have a Chinese Model and you just did what was supposed to be avoided. You should get accustomed to Miflash moving forward. Never use Flash_All_Lock while cross flashing China/Global roms. You'll have to wait to unlock your Bootloader now and post that flash the China rom to get back. If any time you wish to move to the India rom, either use a twrp recovery or just use Flash_All while using the fastboot image which should eventually avoid locking the bootloader
Sent from my Redmi K20 Pro using Tapatalk
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
hippo2s said:
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Click to expand...
Click to collapse
Read this https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
And this
https://forum.xda-developers.com/k20-pro/help/k20-pro-bricked-t3951531
You're probably going to have to open up the phone and pay $20 for someone to use their authorised account to flash an official ROM whilst remoting in to your PC.
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
hippo2s said:
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
Click to expand...
Click to collapse
My comment was meant for OP but I hoped it would help you as well! I am personally not well informed about the Xiaomi / Redmi ownership situation when the seller unlocked the phone.. maybe you can contact them and get a corresponding password to the account, it has been the solution I have seen offered here. Maybe the emergency flash solution from Robbo.5000 works?
I just got this phone a week now and was only able to unlock and flash yesterday, I was aware of the ownership problem thanks to this forum so I bought the sealed CN version. Hope you figure it out!
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Mooatreides said:
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Click to expand...
Click to collapse
Ah alright thank you for the info! This is my first ever Xiaomi / Redmi phone haha
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Did you flash the global rom on an existing running Chinese rom or on an empty device (formatted)? Just for myself cuz I'm not sure whether to unlock and then unable to relock. Thanks.
pungky771 said:
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Click to expand...
Click to collapse
My k20 pro is hard bricked and i cant get fast boot or any thing it wont even come on. Assistance please
hippo2s said:
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
Click to expand...
Click to collapse
Could you please point me to the person you have contacted?
I'm in EDL for about two weeks now, unable to solve it by different means (seller sais 'send it back', which I'm not goong to do; S-unlock has the service unavailable, even though I've paid them and the guy I contacted there tried through TW to no avail, waiting for a 'money back' now)..
Hello, after unsuccessful OTA update my phone doesnt boot into Android any more.
I had an original, untouched xiaomi system (not a custom one, not rooted etc).
Bootloader locked like default.
I think update.zip could be faulty - I have no idea how.
I am able to run Fastboot but due locked BL I cannot do much there.
I deasemble phone, pull out the battery, connected EDL pinouts with a wire, and all this togetcher connecter to PC.
Phone is visible by PC.
Downloaded ROM, and tried to flash via MI Flash..
On last moment I am getting error with information that my mi.com account is not athourised to do such a thing.
I tried also Mi Flash Pro founded on Cyanogenmod forum, but without luck - still getting same error.
Does anyone know how to get out from this situation or should I rather open warranty process in Gearbest?
sabbath88 said:
Hello, after unsuccessful OTA update my phone doesnt boot into Android any more.
I had an original, untouched xiaomi system (not a custom one, not rooted etc).
Bootloader locked like default.
I think update.zip could be faulty - I have no idea how.
I am able to run Fastboot but due locked BL I cannot do much there.
I deasemble phone, pull out the battery, connected EDL pinouts with a wire, and all this togetcher connecter to PC.
Phone is visible by PC.
Downloaded ROM, and tried to flash via MI Flash..
On last moment I am getting error with information that my mi.com account is not athourised to do such a thing.
I tried also Mi Flash Pro founded on Cyanogenmod forum, but without luck - still getting same error.
Does anyone know how to get out from this situation or should I rather open warranty process in Gearbest?
Click to expand...
Click to collapse
Just flash a custom recovery, the device even had the offical twrp. So?? Just not into fastboot and then flash the recovery by the -- command
fastboot flash recovery recovery.img
(You have to rename the twrp file to recovery or whatever, just write the image file name instead of recovery in the second one. Ex fastboot flash recovery 123.img)
Then command
Fastboot reboot
(Hold the power up button for booting into twrp before hitting enter)
Download a miui recovery rom for your device from anywhere, I don't know I'm lazy.
And before flashing, go into mount select vendor and system if not selected.
And then select wipe
Advanced wipe
Select vendor system data cache.
Swipe to clean
Move the rom to your device
(If your device does not show up in your pc, then go into mount (twrp) select enable MTP if it's disabled, if it shows disabled then enable it again)
After that just flash your rom and then a permissive patch you can ask anyone. Or just flash pitchblack recovery. Fixed my problem of not not booting.
Sorry for the wrong format, wrote it on mobile, as I am a lazy bum.
Wut bruh.
Something similar happened to my friend's Poco F1. It was locked and I only could boot into fastbook, looked everywhere for a solution and found this lifesaving tool . It may work for Redmi 8 too.
ChakibDEV said:
Something similar happened to my friend's Poco F1. It was locked and I only could boot into fastbook, looked everywhere for a solution and found this lifesaving tool . It may work for Redmi 8 too.
Click to expand...
Click to collapse
thanks so much, that helped
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Never trust droidwin.com. In the current situation there is no way to fix this. I think RMA is the only option.
Did a quick google and it looks like you used the OP9 method on OP10... oof. The second link on google was the XDA page in the OP9 forums, and yeah that first link is super suspect since they don't even list model number. Sucks.
Most likely stuck with RMA or MSM as only options, you can attempt to boot into the other slot but I'm not sure if that file is persistent between the two.
DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
Qualcomm Crashdump is that you are wrong slot ... You still should have fastboot. Just hold the power button and down volume it will reboot to fastboot ... then use this command " fastboot getvar current-slot " after that use this command to change slots " fastboot set_active other "
Or ... when you get back to fastboot flash twrp to both slots ... just dont panic...like some have and tried to load boot. img and bricked there phones
Stuck in bootloop after trying to flash Oxygen OS 13 coming from ColourOS 13
I have a Chinese Oneplus 10 Pro which I received with ColorOS 12.1 Android 12 NE2210_11_A_07. It then updated OTA with ColourOS 13 .x but the Google Assistant ("Hey Google!") functionality was not working. So then I tried to flash a global rom to...
forum.xda-developers.com
Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?
DD228 said:
Thanks you for your response Canuck and link to post, i try that tomorrow in France to obtain twrp again.
When you say "just dont panic...like some have and tried to load boot. img and bricked there phones" if i have access to twrp again what do i do? usually I will load original boot image? Or or I have to check between slot?
Click to expand...
Click to collapse
Try to switch slots first...and reboot...I been there many times...LOL
Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen
DD228 said:
Ok it's clear thanks
But now, i can't obtain an other thing than Qualcomm crashdump mode, when i make power button and volume bottom since phone off...
And when i keep my phone off it's reboot on the same screen
Click to expand...
Click to collapse
when it powers off...just hold the power button and the volume down see if it boot in to fastboot
Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After
DD228 said:
Nothing when i make that, vibration + black screen 10 seconds and Qualcomm Crashdump Mode After
Click to expand...
Click to collapse
I just put my phone in Qualcomm dump mode...while you are in Qualcomm dump mode....hold the power button and volume down button...it will put you to fastboot...?
I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot
DD228 said:
Hello forum team,
I have a OnePlus 10 Pro with NE2213 version.
I have follow this thread successfully https://forum.xda-developers.com/t/guide-install-twrp-root-install-magisk-bypass-safetynet.4533511/
and this thread "How to Remove Orange State Warning on OnePlus Android 13" with no success
Now i'm on the Qualcomm Crashdump mode, with no access to bootloader or twrp. How to acess to flash an other rom or reset that?
Thanks you for your help
Click to expand...
Click to collapse
What method did you try to use exactly to remove the orange warning?
Canuck Knarf said:
I think it go into Qualcomm dump mode because there is nothing on that slot..."not sure" but you need to get to fastboot...can't do anything without fastboot
Click to expand...
Click to collapse
Yes it's possible!
TheNewHEROBRINE said:
What method did you try to use exactly to remove the orange warning?
Click to expand...
Click to collapse
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A
DD228 said:
Yes it's possible!
I have try this method
How to Remove Orange State Warning on OnePlus Android 13
In this guide, we will show you various methods to remove the Orange State Warning on your OnePlus device running Android 13/OxygenOS 13.
www.droidwin.com
But with extract of payload.bin of OnePlus 10 Pro NE2213, Android 13 image on slot A
Click to expand...
Click to collapse
You did this cause you don't like the Orange state...!!!! Buds thats for oneplus 9 pro ...no where did I see it for 10 pro...
What method did you try...LOL . Method 1 , 2 , 3 , or 4
Look at my pic in my Avatar...says it all
Hello I tried installing a custom rom on my Redmi Note 11 but forgot to use twrp to make a recovery img and now it is stuck on the fastboot screen and I can't get out of it. Please help.
FlameAL said:
Hello I tried installing a custom rom on my Redmi Note 11 but forgot to use twrp to make a recovery img and now it is stuck on the fastboot screen and I can't get out of it. Please help.
Click to expand...
Click to collapse
Hello and good morning, @FlameAL
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to
Redmi Note 11 (spes/spesn)
The Redmi Note 11 is a 6.43" phone with a 1080x2400 resolution display. The Qualcomm SM6225 Snapdragon 680 4G chipset is paired with 4/6GB of RAM and 64/128GB of storage. The main camera is 50+8+2+2MP and the selfie camera is 13MP. The battery has a 5000mAh capacity.
forum.xda-developers.com
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
FlameAL said:
Hello I tried installing a custom rom on my Redmi Note 11 but forgot to use twrp to make a recovery img and now it is stuck on the fastboot screen and I can't get out of it. Please help.
Click to expand...
Click to collapse
fastboot
FlameAL said:
Hello I tried installing a custom rom on my Redmi Note 11 but forgot to use twrp to make a recovery img and now it is stuck on the fastboot screen and I can't get out of it. Please help.
Click to expand...
Click to collapse
Is your bootloader unlocked?
If yo bootloader is unlocked then you can just use adb fastboot on yo PC to get done with your problem. Same happened with me numerous times last year but I got out of it quite easily. All you gotta do is to connect yo phone with the PC but before that make sure you have installed ADB and fastboot program and the required drivers after that just use the following commands:
>adb devices
Enter
>fastboot flash boot
space and then drag the TWRP image to the command window from the download location or wherever you have place it already.
It will take some time and after the completion enter the following command:
>fastboot reboot
This will put your Redmi Note 11 into recovery loader screen and soon you will see the TWRP logo.
However if you don't wanna go this way then there's another way.
Download MI Flash Tool.
Download The required drivers.
Download RN11 TGZ file.
Plug your device to yo PC.
In MIFlash Tool slect the TGZ File and choose your desired option either flash and lock bootloader or flash and keep the bootloader unlock.
I hope it will help.
NotClawGenius said:
If yo bootloader is unlocked then you can just use adb fastboot on yo PC to get done with your problem. Same happened with me numerous times last year but I got out of it quite easily. All you gotta do is to connect yo phone with the PC but before that make sure you have installed ADB and fastboot program and the required drivers after that just use the following commands:
>adb devices
Enter
>fastboot flash boot
space and then drag the TWRP image to the command window from the download location or wherever you have place it already.
It will take some time and after the completion enter the following command:
>fastboot reboot
This will put your Redmi Note 11 into recovery loader screen and soon you will see the TWRP logo.
However if you don't wanna go this way then there's another way.
Download MI Flash Tool.
Download The required drivers.
Download RN11 TGZ file.
Plug your device to yo PC.
In MIFlash Tool slect the TGZ File and choose your desired option either flash and lock bootloader or flash and keep the bootloader unlock.
I hope it will help.
Click to expand...
Click to collapse
Thanks it is now fixed