How do I update Magisk? In the main topic it is advised to update Magisk using the Manager but that's not possible. I'm currently having Magisk Manager 6.0.1 with Magisk 17.3 installed. The Manager only asks to update itself to version 6.1. But that version directly crashes on start because there is no backwards compatibility with with Magisk < 18. Therefor I want to update using TWRP. My question is now if I can simply install the new version without uninstalling Magisk? Or do I have to uninstall Magisk first? If the latter, is it enough to restore the original bootloader or do I have to uninstall Magisk completely (and loosing all data in the progress)?
Thanks for your help.
Same question here, somebody please look into this.
I have Magisk 20.1 (Magisk Manager 7.5.1) currently installed on my Samsung Galaxy Tab A (2016). While initially installing it was not as straight forward as it might have been (install doc could use some work; I think it's written for folks with more familiarity with android devices on a day to day basis than those who root a phone maybe once every few years); I installed Magisk and it's been working fine.
However, this morning I had a notification that I needed to run Magisk setup. I told it to do so; it downloaded something; rebooted the tablet ( which wasn't warned of in the notification); and on coming back up ran Busybox so I'm assuming that was the setup. Going into Magisk Manager, however, I got the same notification over again. So I let it update again with the same result.
This time I told it to cancel the update/setup. I then tried to manually do the update from 20.1 (20100) to 20.3 (20300, latest available version). Update proceeded normally until repacking; which failed. Since Magisk is already installed and working (with several root level apps) on this phone; I can't see where this could be the "wrong image problem" which seems to be the most prevalent root cause of this kind of error. Unfortunately the update as distributed doesn't say anything about *why* it can't repack the image; so the message doesn't help us ordinary folks in debugging.
Any ideas as to what the actual issue is?
Android info:
Version 8.1.0
Kernel 3.18.14-1570595
Build M1AJQ.T580UEU4CSC1
Note: Busybox had an update I believe came out sometime yesterday (saw notification it updated successfully). Could it be that something in the Busybox update broke the Magisk update process?
Suddenly after a long time even after not updating because the new update bricked my phone Magisk Manager 5.5.5 (really old version) suddenly decided to give up on me..
Magisk Manager keeps prompting for a update now but I cannot open or install it. Theres even no more crash message.. I have no xposed modules or anything installed, just Magisk Manager and root in order for my own small apps that I wrote(years ago) and to read wpa_supplicant.conf...
I have no known damage to my phone. I am still using my Lenovo Vibe P2 same firmware Android 7 kernel 3.18.31-perf-g247719e.
Any advice?
Hint: Can't update rom firmware, because 1. I have been banned from OTA because I unlocked bootloader. 2. Because I am too lazy.
I can give adb log, but I have not touched Magisk Manager for years and suddenly it ****ed up.. Now I want to run a specific app and it checks for root, I need a magisk module to hide it.
Other applications still work fine even those what can check for root. Except for a few new ones.
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Same here...
I am using MicroG without Safetynet support and I think that is the issue, unfortunately.
Payconiq by bancontact / rooted device
Hello
I have the same problem with OP6 rooted ... magisk hide activated but when run the payconiq Bancontact app " There is an error " not possible to run the app.
Anybody for a solution ?
veronesi.n said:
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Click to expand...
Click to collapse
I used to use an old apk of the app but now it doesn't let me use it and forces me to upgrade to last version.
My wife's app is working well but she has a lg g7 thinq unrooted.
So if someone can help, it would be very much appreciated as every other app is working well, safety net is passed, and this app is my only way to pay contactless because my banking app doesn't have a payement option in it.
I'm using it without issues. I hide it and just turn off USB debugging when I'm using it.
Just to make sure, did you just enable Magisk Hide in the options and nothing else?
Or did you also - after enabling - go into the Magisk Hide option that now appeared in the menu and placed a checkmark after all programs for which you want to hide Magisk from, in this case Payconiq ?
Clear Payconiq cache and data, reboot and setup Payconiq.
I have the same problem.
Magic hide is enabled. USB debugging is disabled.
In the Magic hide menu, the Payconiq app has a checkmark. All my other banking apps work fine.
Phone = Samsung J7 (2016)
Does someone have a solution?
Thanks
What's your problem with this app Can't you run it Can someone show what message is showing For me, this application is not available in my country, so I downloaded it from outside. I have Magisk 21000 root and Magisk manager 8.0.2 (307) (11) and it works for me and nothing is screaming about root etc :highfive:
It is the "Payconiq by Bancontact" app.
It worked on my phone without root. Since my phone is rooted, it doesn't work any more.
My phone is rooted with Magisk 20.4 (20400) and Manager 8.0.2 (307)
When I use the app: I receive this message. I hope this can help...
Date: 12 Oct 2020 15:23:47 GMT+02:00
Device: samsung SM-J710F
App version: 5.5.3
OS version: 8.1.0
App token: /
Failure code: ERROR_SDK_INTEGRITY (81)
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Veke123 said:
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Click to expand...
Click to collapse
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
flotheking said:
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
Click to expand...
Click to collapse
I use the "Payconiq By Bancontact" app. I don't know which version it was that worked before, but after an update I can not run it anymore on a rooted phone.
I will send you the apk of the "Payconiq by Bancontact" app. Hope you can find a solution.
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
flotheking said:
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
Click to expand...
Click to collapse
sorry for bumping an old thread but what are you using now?
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
seeschloss said:
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
Click to expand...
Click to collapse
thx for responding, what version are you using?
5.14.1 Payconiq app works for me Magisk hide root
Spartacus500 said:
5.14.1 Payconiq app works for me Magisk hide root
Click to expand...
Click to collapse
sadly not working for me, when i hide app in magisk, launching gets aborted without error message
got it working again
latest magisk, latest riru, lsposed, gravitybox all installed without issues to payconiq
payconiq app hidden in magisk, magisk manager isn't hidden
the thing that got it working again was disabling magisk module G-visual mod, same for magisk module fullscreen immersive gestures. Apparently payconiq app doesn't like keyboard spacing to be changed ????
i'm quite happy that i found it, but if anyone could explain i'd very gratefull
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Bergfex2 said:
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Click to expand...
Click to collapse
Could be detecting your unlocked bootloader, various prop values, etc. For a list of props that are common detectors, and that MagiskHide changes (which of course is removed in the next stable release) you can check here:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf#setreset-magiskhide-sensitive-props